RBAC configuration in Solaris 10

Hello All,
I am trying to implement a script for resetting the users password without allowing user management (usrmgr group) to have direct access to password command by added this script in "usrmgr RBAC profile".
Kindly let me know the syntax that need to be added in "exec_attr" file.
Cheers,
Amar

The sendmail control file is in /lib/svc/method/smtp-sendmail (you may have to export them first using the svccfg tool)
Edit it and change the line MODE="-bd" to MODE=""
Edit the /etc/mail/submit.cf file.
Change the line D{MTAHost}[127.0.0.1] to D{MTAHost}[mail.yourdomain.com]
Restart Sendmail with: svcadm disable smtp; svcadm enable smtp

Similar Messages

  • Getting error with sudo configuration on solaris 10

    Valuable Member,
    I have some issue with Sudo configuration on Solaris 10 (Sparc), I installed gcc & libiconv then install sudo package everything done well till I run "./configure" but when I run "make" its giving lots of error ... I am confused what I have to do ... Please tell me what exactly I have to do or what I am missing
    ---------------------------ERROR CUT-------------------------------------
    # make
    gcc -c -I. -I. -I/tmp/rsa -O2 -D__EXTENSIONS__ -D_PATH_SUDOERS=\"/etc/sudoers\" -D_PATH_SUDOERS_TMP=\"/etc/sudoers.tmp\" -DSUDOERS_UID=0 -DSUDOERS_GID=0 -DSUDOERS_MODE=0440 check.c
    In file included from /usr/include/sys/wait.h:24,
    from /usr/include/stdlib.h:22,
    from check.c:31:
    /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:292: error: parse error before '}' token
    /usr/include/sys/siginfo.h:294: error: parse error before '}' token
    /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
    /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
    /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
    /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
    /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
    /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
    /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
    /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
    /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
    /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
    /usr/include/sys/siginfo.h:426: error: parse error before '}' token
    /usr/include/sys/siginfo.h:428: error: parse error before '}' token
    /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
    /usr/include/sys/siginfo.h:437: error: parse error before '}' token
    In file included from /usr/include/sys/procset.h:24,
    from /usr/include/sys/wait.h:25,
    from /usr/include/stdlib.h:22,
    from check.c:31:
    /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
    In file included from /usr/include/stdlib.h:22,
    from check.c:31:
    /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
    In file included from check.c:55:
    /usr/include/signal.h:111: error: parse error before "siginfo_t"
    /usr/include/signal.h:113: error: parse error before "siginfo_t"
    *** Error code 1
    make: Fatal error: Command failed for target `check.o'
    ---------------------END ERROR---------------------------
    ///Thanks
    Mohammed Tanvir

    How did you install gcc, I don't think its working correctly.
    There should be a copy of gcc installed with solaris 10 in /usr/sfw/bin.
    I suggest you use that one instead..

  • Sendmail Configuration in Solaris 10

    I have a script that I've been using in Solaris 9 to disable incoming mail. The script basically
    - edits the "/etc/rc2.d/S88sendmail" file
    - replaces MODE = "-bd" with MODE = " "
    - sends command "/etc/init.d/sendmail stop" to stop sendmail
    - sends command "/etc/init.d/sendmail start" to restart sendmail
    Can anyone tell me how to do this in Solaris 10 since "/etc/rc2.d/S88sendmail" file no longer exists. I'm assuming it has something to do with SMF. I've found documentation on how to start and stop services (ie: sendmail) with SMF but can't seem to find how to make configuration changes.
    Any help is greatly appreciated.

    The sendmail control file is in /lib/svc/method/smtp-sendmail (you may have to export them first using the svccfg tool)
    Edit it and change the line MODE="-bd" to MODE=""
    Edit the /etc/mail/submit.cf file.
    Change the line D{MTAHost}[127.0.0.1] to D{MTAHost}[mail.yourdomain.com]
    Restart Sendmail with: svcadm disable smtp; svcadm enable smtp

  • How to set semaphores configuration in Solaris 10 zones

    Dear All:
    I have a Sun SPARC T5120 with 16gb RAM. I have created three zones on that servers. Each zone I have configured 4gb RAM. I mean 3 zones will take 4*3=12gb RAM.
    In the first zone Oracle Database 11g installed. SGA has 3gb
    In the second zone Oracle Database 11g installed. SGA has 3gb.
    In the third zone Oracle Application Server 10g installed.
    In the parent - global zone I have set the semaphore settings 8gb in /etc/systems
    My question is:
    Oracle Database 11g is mandatory to take the semaphore settings?
    First & Second zones Oracle Database will take the semaphore settings?
    Is there any other way to give the semaphore settings in the same child zone?
    If my question is not clear, pls revet back with your points. I am happy to reply.
    Expert throw some light on this.
    Thanks in advance,
    Balaji Sridhar

    Balaji,
    This is not an application server related question. You may get an answer when you post your question in a Solaris forum.
    Thanks,
    EJ

  • Configuration snmp Solaris 9 and 10

    I installed netsnmp in Solaris 9 x86, the configuration archive is very
    vacant has few commentaries and almost no configuration, alguem can
    give one to me help of as to use the command snmpwalk in the Solaris?
    Another doubt is if I can substitute the archive of configuration of
    the net-SNMP of the solaris for one of linux? the net-SNMP in linux
    allows to use an addressing of arvore MIB pra execution of scripts, in
    the solaris is possible?

    In snmpd.conf file add these entries.
    rocommunity public
    syslocation "System administrators office"
    syscontact "System administrator"
    sysservices 72
    And then start snmpd .Then to do a snmpwalk juz use
    ~#snmpwalk -c public -v 1 localhost
    Assuming that you have compile and configure with SNMP v1 support

  • Unable to regenerate /dev/rmt/0 drivers with cfgadm -c configure on Solaris 10 update 11 (1/13).  How does one do this for SAS HBA StorageTek Autoloader?

    How does one regenerate the /dev/rmt/0 when cfgadm -c configure <device> will not rebuild it?  Have attempted reboot -- -r, with modifing /kernel/drv/st.conf as well as /kernel/drv/sgen.conf.  Running on a SPARC T4-1 Solaris 10 updat3 11, (1/13).

    This has been resolved.  Getting the /etc/driver_aliases set correctly: # update_drv -d -i st; update_drv -d -i sgen; add_drv -m '* 0600 root sys' -i '"scsiclass,01" "scsiclass,08" wa' worked.  Making sure the st and sgen entries are in /etc/name_to_major were needed.  For the Simpana/CommVault WA drivers, in opt/simpana/WA/wa.conf with the name="wa" parent="fp" target=16 lun=0 fc-port-wwn="device's World Wide Number> added for each lun 0 to 7.  Then the touch /reconfigure; reboot worked.  First the c1::rmt/0 tape and c1::scsi/changer/<wwn> med-changer were mapped.  After modifying the minor_perm ('* 0600 root sys') and name_to_major entries, the WA CommValt entries , WA drivers showed up in cfgadm -al as c1::wa0  tape and c1::wa1  med-changer, only recognizable from CommVault.  Also had to update the SAS-2 HBA StoregTek Autoloader driver with patch 145648-05. Solaris 10 update 11 (1/13) comes with 145648-03.  In our particular case, we found cfgadm -al mapped SAS-2 HBA to c1 using the single mini-sas 6gb connector cable, where it mapped to c7 with the four tail connector.

  • Hp 9500 printer configuration on solaris 10 on vmware server

    hi,
    i installed solaris 10 on vmware server when i am going to configure the network printer 9500 hp (its having print server that also i am giving in the print server properties ) , but still i am unable to give print out from staroffice application,
    can you write me steps in details Please as soon as possible,
    Thanks,
    Zubair.

    > Please, can somebody give me the way, step by step to
    configure a DNS server on solaris 10. i want to have
    the directories and files that it is necessary to
    modify and the modification to have a domain name
    "deptech.lan" with ip adress of the DNS
    server 192.168.100.2.
    >
    > thankDo this in this way,
    1. unconfig your system
    # sys-unconfig
    2. Then press " Y" after that it wil reboot..
    3. Then it will start config.
    4. you can see like that,
    Network ( y/n)
    Network Interfence ( acc. 2 ur NIC , e.g. rstl0 /nge0 etc..)
    select it. If you have two NIC in your system. then you choose any one..
    5. Enter your " Host name"
    6. then system ip
    7. Then some stpes wll appear, it shows,, DHCp, Enable Ipv6 etc.. select acc. 2 ur configartion.
    8. Then it will appear ' name service"
    then select " Dns"
    9. Give your DNS server name
    10 . enter " server ip "
    then search domain ( enter acc. 2 ur config/ may leave blank)
    N.B: for going next stages / contiues you have to use " F2" key..
    then it will configured..
    Let me know if its ok or for any problem..
    Thanks
    Partha

  • DNS server configuration on solaris 10

    Please, can somebody give me the way, step by step to configure a DNS server on solaris 10. i want to have the directories and files that it is necessary to modify and the modification to have a domain name "deptech.lan" with ip adress of the DNS server 192.168.100.2.
    thank

    > Please, can somebody give me the way, step by step to
    configure a DNS server on solaris 10. i want to have
    the directories and files that it is necessary to
    modify and the modification to have a domain name
    "deptech.lan" with ip adress of the DNS
    server 192.168.100.2.
    >
    > thankDo this in this way,
    1. unconfig your system
    # sys-unconfig
    2. Then press " Y" after that it wil reboot..
    3. Then it will start config.
    4. you can see like that,
    Network ( y/n)
    Network Interfence ( acc. 2 ur NIC , e.g. rstl0 /nge0 etc..)
    select it. If you have two NIC in your system. then you choose any one..
    5. Enter your " Host name"
    6. then system ip
    7. Then some stpes wll appear, it shows,, DHCp, Enable Ipv6 etc.. select acc. 2 ur configartion.
    8. Then it will appear ' name service"
    then select " Dns"
    9. Give your DNS server name
    10 . enter " server ip "
    then search domain ( enter acc. 2 ur config/ may leave blank)
    N.B: for going next stages / contiues you have to use " F2" key..
    then it will configured..
    Let me know if its ok or for any problem..
    Thanks
    Partha

  • Windows System Configuration in Solaris 8 x86

    Hi
    I am doing the Solaris 8 Web Jumpstart Installation wherein it configures for Display. While configuring the display whatever resolution I mention it will not show the image and eventually it will not configure the Windows System and hence the Open windows will not be displayed. The screen goes blank when Open Windows starts and I am forced to install the Solaris software through command prompt.
    The hardware description :
    PC : HP Brio
    Pentium III MMX 650MHz.
    Video Adaptor : Matrox G200 8MB.
    Please help me in this regard since I checked the Hardware Compatibility List in which I meet the hardware requirements.
    Thanks
    Sandesh A K
    System Administrator
    U&I Scotty Computers Ltd.

    I can't help you either. But I have the same problems. Running a Matrox MGA G200 with Panel Link (Digital Flat Panel). Doesn't work with Linux, doesn't work with Solaris 8. I am configuring over and over. But after continuing with F2 in kdmconfig monitor goes into power save. That's it. Any suggestions from forum members ?
    Thanx.

  • NIC CONFIGURATION  IN SOLARIS 8

    Hi
    I am having Ultra 10 workstation of Sun. I installed solaris version 8(Sparc)
    I checked to see nic configured or not by
    ifconfig -a
    But I found only loopback adapter
    I want to configure NIC in Solaris 8 with Ultra10 workstation
    How can I configure pl. guide me
    Satish

    The integrated network controller on the Ultra 5 and Ultra 10 systems
    (same systemboard in different shaped chassis)
    use the hme interface, not tpe.
    O.P.
    If this is a fresh install, you may have simply answered some of the initial networking questions incorrectly.
    Network functionality on that box should "just work".
    See the man pages for sys-unconfig.
    It may be the quickest way to resolve the issue.

  • Tape library and tape drive configuration in solaris platform

    Dear all,
    I am tying to install oracle secure backup media library server in solaris SPARC 64 machine.
    when i was try to run run SETUP command always miss to copy drive .please look my output.
    ./setup -t /usr/local/oracle/backup/Dec 19 12:42:02 ctcellm last message repeated 2 times
    Welcome to Oracle's setup program for Oracle Secure Backup. This program loads Oracle Secure Backup software from the CD-ROM to a filesystem directory of your choosing.
    This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_SOLARIS64.
    Please wait a moment while I learn about this host... done.
    1. solaris64 (SPARC)
    administrative server, media server, client
    - - - - - - - - - - - - - - - - - - - - - - - - - - - Loading Oracle Secure Backup installation tools... done.
    Loading solaris64 administrative server, media server, client... done.
    - - - - - - - - - - - - - - - - - - - - - - - - - - - Oracle Secure Backup has installed a new obparameters file.
    Your previous version has been saved as install/obparameters.savedbysetup.
    Any changes you have made to the previous version must be made to the new obparameters file.
    Would you like the opportunity to edit the obparameters file Please answer 'yes' or 'no' [no]:
    - - - - - - - - - - - - - - - - - - - - - - - - - - - Loading of Oracle Secure Backup software from CD-ROM is complete.
    You may unmount and remove the CD-ROM.
    Would you like to continue Oracle Secure Backup installation with 'installob' now? (The Oracle Secure Backup Installation Guide contains complete information about installob.) Please answer 'yes' or 'no' [yes]:
    Welcome to installob, Oracle Secure Backup's installation program.
    For most questions, a default answer appears enclosed in square brackets.
    Press Enter to select this answer.
    Please wait a few seconds while I learn about this machine... done.
    Have you already reviewed and customized install/obparameters for your Oracle Secure Backup installation [yes]?
    Verifying that installation parameters are correct... done.
    Updating install/obparameters... done.
    Oracle Secure Backup is already installed on this machine (ctcellm).
    Would you like to re-install it preserving current configuration data[no]? yes
    Oracle Secure Backup's Web server has been loaded, but is not yet configured.
    Choose from one of the following options. The option you choose defines the software components to be installed.
    Configuration of this host is required after installation completes.
    You can install the software on this host in one of the following ways:
    (a) administrative server, media server and client
    (b) media server and client
    (c) client
    If you are not sure which option to choose, please refer to the Oracle Secure Backup Installation Guide. (a,b or c) [a]? b
    Beginning the installation. This will take just a minute and will produce several lines of informational output.
    Installing Oracle Secure Backup on ctcellm (solaris version 5.10)
    generating links for server installation
    checking Oracle Secure Backup's configuration file (/etc/obconfig)
    protecting the Oracle Secure Backup directory
    installing /etc/init.d/OracleBackup for observiced start/kill ops at
    operating system run-level transition
    installing start-script (link) /etc/rc2.d/S92OracleBackup
    installing kill-script (link) /etc/rc1.d/K01OracleBackup
    installing kill-script (link) /etc/rc0.d/K01OracleBackup
    Starting Oracle Secure Backup service daemon (/etc/observiced)
    from all of the documentation i found that after execute below command it will automatically copy device drive
    installing start-script (link) /etc/rc2.d/S92OracleBackup
    installing kill-script (link) /etc/rc1.d/K01OracleBackup
    installing kill-script (link) /etc/rc0.d/K01OracleBackup
    Starting Oracle Secure Backup service daemon (/etc/observiced)
    please help me out from this issues .
    regards,
    utpal

    I am facing the same problem. Could you please give me the procedure to solved this issue. How can i add the driver???
    # update_drv /usr/sbin/update_drv -d '"scsiclass,01"' st
    Usage: update_drv [ -f | -v ] <driver_module>
    update_drv [ -b basedir ] [ -f | -v ] -a
    [-m 'permission'] [-i 'identify_name']
    [-P privilege] [-p 'policy'] <driver_module>
    update_drv [ -b basedir ] [ -f | -v ] -d
    [-m 'permission'] [-i 'identify_name']
    [-P privilege] [-p 'policy'] <driver_module>
    NOTE: at least one of m/i/P/p must be specified with -a and -d.
    # add_drv -m '*0666 bin bin' -i '"scsiclass,01" "scsiclass,08" "scsa
    ,01.bmpt" "scsa,0.8.bmpt"' sgen
    Option (-m) : missing token: (*0666 bin bin)
    Usage:
    add_drv [ -m '<permission> ','<...>' ]
    [ -n ]
    [ -f ]
    [ -v ]
    [ -i '<identify_name  <...>' ]
    [ -b <basedir> ]
    [ -c <class_name> ]
    [ -p <dev_policy> ]
    <driver_module>
    Example:
    add_drv -m '* 0666 bin bin' -i 'acme,sd new,sd' sd
    Add 'sd' drive with identify names: acme,sd and new,sd.
    Every minor node will have the permission 0666,
    and be owned by bin with group bin.
    In Solaris 10 10/09 Release Notes:x86: add_drv, update_drv, and rem_drv Commands
    ShouldUse Advisory Record Locking (6445040)
    The update_drv command does not remove the /tmp/AdDrEm.lck lock file immediately,
    resulting in subsequent add_drv, update_drv, and rem_drv commands to fail. This issue is
    mostly visible when creating a custom install image. This lock file has been bundled in the
    miniroot so any attempts to add a package will fail. The following error message is displayed:
    add_drv/rem_drv currently busy; try later
    Workaround: If the /tmp/AdDrEm.lck file exists, manually remove it before attempting a
    pkgadd or _drv commands.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • ASM Configuration on Solaris

    Hi,
    I want to configure ASM on Solaris Oracle sparc-64 bit server with Netapp storage.
    I am bit confused, when to create diskgroup using asmca. Because there is no asmlib package available. I cannot start grid installation because during installation it asking for disk (which i want to use from shared storage diskgroup).
    Yuvraj

    You should read the installation REQUIREMENTS for the platform you are using. You do NOT need to follow some other document to "mark" the devices for ASM. It is not necessary. I have NEVER done this, nor have I EVER used asmlib on Linux. IT IS NOT NECESSARY!!!!!!! Read the Oracle docs.
    have sys admin configure devices to be visible for all nodes (stand-alone or cluster)
    Make sure you use fdisk and use a partition that excludes the first 2 cylinders (0-1). Your partitions should start at cylinder 2. If you do not, ASM will overwrite the Solaris VTOC for the device rendering it unusable until you correctly partition the devices. The device should only have 2 partitions. Partition 1 is cylinder 0-1, and Partition 2 is cylinders 2-<last>. All ASM disks in a given DISKGROUP need to be EXACTLY the same size. You can have multiple diskgroups with different size devices, but that just makes managing your devices more complicated. A word of warning, in 11gR2, if you use a diskgroup with EXTERNAL REDUNDANCY, you will only get 1 voting file. The recommendation for a CRS diskgroup is to be made up of 3 x 2G devices for OCR/VOTING with NORMAL redundancy. This will create 3 voting files.
    set correct ownership of grid:oinstall (or whatever:whatevergroup) for only partition 2 of these devices
    Next make sure the grid user and the oracle rdbms user can both READ and WRITE to these partitions (rdbms user must be a member of the oinstall/whatever group).
    during the install, make sure you change the ASM_DISKSTRING to point to these devices:
    eg: /dev/whatever*p2. The installer will then mark the devices properly and create the diskgroup(s)
    I don't know why so many people make this so hard. It is NOT that hard!!!!!
    [Frame of reference:  I have installed > 75 10g-11gR2 clusters.]
    Edited by: onedbguru on Dec 9, 2012 1:12 PM

  • Configuration FTP Solaris 9

    Hi!
    I'm executing an ftp from a ZOS system to a Solaris 9. The file transfer is correct, but the files arrive with rw-r--r-- permissions. I need those files to have rw-rw-r-- permissions for a former processing.
    I'm using TCP Wrappers, in the inetd.conf file I use the following commands:
    # FTPD - FTP server daemon
    #ftp stream tcp6 nowait root /usr/sbin/in.ftpd in.ftpd -a
    ftp stream tcp nowait root /usr/sfw/sbin/tcpd in.ftpd -a
    Where can I change the configuration to make the files arrive directly with the right permissions i need?
    Thanks,
    Ricardo

    This is kind of a wild idea. If your recieving from a ZOS... do you mean an IBM mainframe running MVS. IBM --- FTP requires overriding parameter statements in the JCL... One which you may consider looking into is the SYSFTPD which is required for all ZOS and advanced System 390 computers. In this proc is two pages of file format configuration changes. Setting the file structure and permissions on the recieving or sending side.
    In short; look at both sides of the fence.

  • BerkeleyDB configuration on Solaris

    Hi
    I m using Berkeleydb 4.2.52 with solaris x86 10.My berkeley db directory is /usr/BERKELEYDB.When i run this cmd /usr/BERKELEYDB/build_unix
    ../dist/configure then it shows me the error
    checking build system type... i386-pc-solaris2.10
    checking host system type... i386-pc-solaris2.10
    checking if building in the top-level or dist directories... no
    checking if --disable-cryptography option specified... no
    checking if --disable-hash option specified... no
    checking if --disable-queue option specified... no
    checking if --disable-replication option specified... no
    checking if --disable-verify option specified... no
    checking if --enable-compat185 option specified... no
    checking if --enable-cxx option specified... no
    checking if --enable-debug option specified... no
    checking if --enable-debug_rop option specified... no
    checking if --enable-debug_wop option specified... no
    checking if --enable-diagnostic option specified... no
    checking if --enable-dump185 option specified... no
    checking if --enable-java option specified... no
    checking if --enable-mingw option specified... no
    checking if --enable-posixmutexes option specified... no
    checking if --enable-rpc option specified... no
    checking if --enable-smallbuild option specified... no
    checking if --enable-tcl option specified... no
    checking if --enable-test option specified... no
    checking if --enable-uimutexes option specified... no
    checking if --enable-umrw option specified... no
    checking if --with-mutex=MUTEX option specified... no
    checking if --with-mutexalign=ALIGNMENT option specified... no
    checking if --with-rpm=ARCHIVE option specified... no
    checking if --with-tcl=DIR option specified... no
    checking if --with-uniquename=NAME option specified... no
    checking for ar... missing_ar
    configure: error: No ar utility found.
    i have been set all path
    JAVA_HOME=/usr/j2se
    IMQ_JAR_PATH=/usr/share/lib
    JMS_JAR_PATH=/usr/share/lib
    BDB_JAR_PATH=/usr/share/db.jar
    BDB_SO_PATH=/usr/lib
    AM_HOME=/opt/SUNWam
    I m try to do Sun access manager session failover.I have installed Sun access manager and message queue both are running fine.
    Sun access manager version-2005Q1
    sun message queue-3.6
    BerkeleyDb-4.2.52
    if i run thsi command /opt/SUNWam/bin
    ./amsessiondb -u admin -w admin -b /usr/sessiondb -a abc:7676
    then it show the error
    Initailizing and connecting to the Message Queue server ...
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no db_java in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
    at java.lang.Runtime.loadLibrary0(Runtime.java:788)
    at java.lang.System.loadLibrary(System.java:834)
    at com.sleepycat.db.db_javaJNI.<clinit>(db_javaJNI.java:23)
    at com.sleepycat.db.DbEnv.<init>(DbEnv.java:1092)
    at com.iplanet.dpro.session.jmqdb.client.AMSessionDB.initDB(AMSessionDB.java:207)
    at com.iplanet.dpro.session.jmqdb.client.AMSessionDB.initialize(AMSessionDB.java:252)
    at com.iplanet.dpro.session.jmqdb.client.AMSessionDB.main(AMSessionDB.java:500)
    pls help.it is urgent.
    Thanks
    Rahul saini

    The core reason behind the failure is
    ================
    checking for ar... missing_ar
    configure: error: No ar utility found.
    ================
    Please make sure following directory is in your path and has (ar utility)
    /usr/ccs/bin
    If the above directory does not have "ar" utility then install following packages
    system SUNWbtool CCS tools bundled with SunOS
    system SUNWbtoox CCS libraries bundled with SunOS (64-bit)
    Cheers,
    Sudhir Kulkarni

  • Impact of project.max-shm-memory configuration in Solaris 10

    Dear All,
    I'm not sure if this an error or purposely configured as it is.
    Current kernel configuration of project.max-shm-memory is *400Gb* while the hardware only have 8 GB RAM, and SGA_max set to 5GB (ORACLE database is 10g).
    Will there be any impact in long run with this configuration based on your experiences?
    project: 1: user.root
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    project.max-shm-memory
    privileged *400GB* - deny -
    system 16.0EB max deny -
    Suggestions and advices are much appreciated.
    Thanks and Best Regards,
    Eric Purwoko

    Hi Helios,
    Thanks!, the recommendation is 4294967295, but my SGA MAX and target is 5 GB. Will it cause problem if I put project.max-shm-memory lower than SGA?
    Thanks for the link too. I guess I better put those configuration in /etc/system too.
    But now wondering what's the best value looking at my SGA max configuraiton
    Best Regards,
    Eric

Maybe you are looking for