RBDMIDOC creates duplicateIDocs from the change pointers

Hi,
SAP program RBDMIDOC creates IDocs from the change pointers for a
specified message type(ZHRMDA06_PREHIRE, an extension of standard
HRMD_A06 ) and then marks the change pointer as processed.
HCM has an instance of this program that runs for PreHire employees,
creating 1 Idoc per employee. When this job runs in background via
production batch, a single change pointer for a single employee creates
3 or 4 identical IDocs in that one run of the program. This results in
duplicate records in the resulting interface file to Hewitt.
Please suggest solution for that.
Thanks and Best Regards,
Binod K singh.

hi, try to check the distribution model: BD64, find whether there are mutiple receiving system for your message type...just a suggestion

Similar Messages

Creation of Idocs from the change pointers by the program RBDMIDOC

Hello,
I'm Creating Idocs from the change pointers by the program RBDMIDOC.
The IDOCS Created using the message type HRMD_A are Correct but when i try to RUN RBDMIDOC for message type HRMD_B no Data is selected for distribution.
All the customizing are similar and i presume that all the change pointers are active (BD50 and IMG->Personnel Management -> Organizational Management -> Basic Settings -> Activate change documents).
Can anyone help me with the necessary steps to create this IDOC types.
Do anyone know if the RBDMIDOC report is the Same for messages HRMD_A and HRMD_B.
Thanks in Advance,
Pedro Ferreira

If the setting is fine, there may be some code in exit or badi for program RBMIDOC. Check the Exit and BADI.
check the exit EXIT_SAPLBD11_001 and
check the badi IDOC_CREATION_CHECK.
Probably there may be some code on these exits which are stoping your code from getting generated.These are the two trigger happen once u execute the RBMIDOC program.for HR, we use RHALEINI program to generate the idoc. but even RBDMIDOC works. These 2 triggere will come with RHALEINI also.
If there is no code here, Then there is problem in the setting only.

Do we need the change pointers to be set..

do we need the change pointers to be set/activated
if we are to send data via TRFCs

Change Pointers:
-Change documents are working based on change document technique which
tracks changes made to the key documents (Material Master, Customer
Master, Vendor Master ..etc) in SAP.
-Changes made to the keydocuments are recorded in the change document
Header table i.e. CDHDR and Item table CDPOS,   Additional change
pointers are written in the BDCP and BDCPS tables.
-Change pointers technique is used to initiate the outbound process
automatically when master data is created or changed.
-A standard program RBDMIDOC is sechuled to run on periodic basis to
evaluate the change pointers for a message type and starts the ALE
process for distributing the Masterdata to the appropriate destination.
-'Object' is collection of fields of different database tables. T.code
for creating an object is SCDO.
Configuration for Change Pointers:
1. BD61 Active change pointers generally
     - Check the checkbox "Change pointers activated -generally"
     - Save it
2. BD50 Active change pointers for Message Type
     - Message Type           Active
        MATMAS           check the check box
3. SCDO Change Document Objects
     - Check whether the "MATERIAL" is available in the object list.
4. BD52 Maintain Table Views
     - Enter the Message type "MATMAS" and press enter.
     - OBJECT      TABLE NAME     FIELD NAME
   Ex:    MATERIAL      MARA          BISMT
5. BD60 Additional data for message types
        - Message Type           Function Module          Table
   Ex:       MATMAS     MASTERIDOC_CREATE_SMD_MATMAS     MARA
6. WE20 Partner Profile
7. BD64 Distribution Model
8. Create a Material by using T.Code MM01
9. SE38 Run the program RBDMIDOC by passing Message type "MATMAS"
10. WE02 IDOC List
Regards
srikanth

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps..

Unable to create DIR from the objects

Hi,
I want to create the DIR from the object transaction, eg., Purchase Order, I have set "1" - Create Simple Document under Define Object Links for that particular Document type, But despite this config, I am not getting the "create" button. whereas I have assigned the same document type to another Object link Appropriation Request, and I am able to create DIR from the object transaction itself. Upon, exploring the system, I found that the Purchase order uses the Program "SAPLCVOB" screen"0200" whereas Appropriation request has Program "SAPLCV140" screen"0204" So, I presume that the configuration affects only SAPLCV140 and it has no affect to SAPLCVOB. Or is there any other way to create the DIR directly from the objects which uses SAPLCVOB program? My user wants to create DIR directly from PO.

Dear Mohamed,
To grant that allways the currenct screens and authorizations were
called please maintain also the value "1" into the "Authorization"
column. For further informations on this maintainance please see the
SAP note 1066915. It's important that you not enter the mentioned
screen number wihtout the leading "1" as this number is added
automatically by the system (e.g. object MARA 1201 maintain like MARA
201). You can do this in customizing under:
Transaction SPRO
> Cross-Application-Component
    > Document Management
         > Control Data
             > Define screen for object links
If you need the dynpro number or object you will find all standard SAP
objects and their screen number in function module CV130 (Screens) by
transaction SE80. Please maintain all necessary SAP objects.
Best regards,
Christoph

Error Received When Trying To Create DSN From The Command Line

All,
Your help is greatly appreciated in advance. I am having trouble packaging Oracle 10G for a batch file deployment. Everything is done except for getting the DSN created which is causing me major problems. We am working with the Oracle 10G R2 10.2.0.1.0 Client on Windows XP Professional SP2. The Oracle database resides on a Windows 2000 Professional Server SP4 running Oracle 9i.
Our Environment: I am creating two packages of the Oracle 10G client. The first is for a batch file distribution via LANDesk and the other package is for normal batch file install if someone from IT is installing this from a user's desk. Both scripts are really identical the only differences are how they are laid out. I only need help with the DSN creation as everything else is ready to go. I am going to focus on the Non-LANDesk batch file as once I fix this in one script the other one should also be fixed.
The Problem: The batch script copies the neccesary files to the temporary directory. I then extract the setup files to the temp folder. I run a custom Oracle install using the RSP file from a recorded install. After the install is complete I copy the TNS Names file to the proper location. I then try to call a CMD file with the ODBC command seen below the main script.
Script (May be easier to read if you download using link below):
@ECHO ON
::This batch files installs Oracle 10G Release 2 Version 10.2.0.1.0 with a Custom Response File
::Installation is Interactive
::All files are extracted from the ZIP file via the 7-Zip command line tool
::The Net Configuration Assistant TNS Names File is copied to its proper location
::The CCR ODBC connection is created once the install is complete
::All folders used for installation are cleaned up-deleted
@ECHO Setting Variables
set NetworkPath=\\dc-landesk\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD
set DefaultPackagePath=C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD
set ExtractionPath=C:\Temp_Oracle10G
set TempInstallFromPath=C:\Temp_Oracle10G\SetupFiles
set FileFolderCleanupPath=C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent
@ECHO Creating Directories
mkdir "C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD"
@ECHO Copying Files to DefaultPackagePath
copy /Y "%NetworkPath%\7za.exe" "%DefaultPackagePath%"
copy /Y "%NetworkPath%\CCR-ODBC.cmd" "%DefaultPackagePath%"
copy /Y "%NetworkPath%\Oracle10GCustom.rsp" "%DefaultPackagePath%"
copy /Y "%NetworkPath%\SetupFiles.zip" "%DefaultPackagePath%"
copy /Y "%NetworkPath%\tnsnames.ora" "%DefaultPackagePath%"
@ECHO Changing to Extraction Directory
cd "%DefaultPackagePath%"
@ECHO Extracting Files to path with no spaces
"%DefaultPackagePath%\7za.exe" x SetupFiles.zip -o%ExtractionPath% -aoa
@ECHO Please Open the "Task Manager" manager, Sort by "CPU" Descending
@ECHO Watch Task Manager For Javaw.exe, press any key when the process Disappears
@ECHO Install using Custom Response File
"%TempInstallFromPath%\setup.exe" -responseFile "%DefaultPackagePath%\Oracle10GCustom.rsp" -force -silent -noconsole
pause
@ECHO Copying NETCA (Net Configuration Assistant) TNS Names File to proper Location in Oracle Product Directory
copy /Y "%DefaultPackagePath%\tnsnames.ora" "C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora"
@ECHO Creating ODBC Connections Using Oracle Driver installed by this Batch File
call "%DefaultPackagePath%\CCR-ODBC.cmd"
@ECHO Waiting 20 seconds before proceeding
ping -n 21 127.0.0.1 >NUL
@ECHO Remove Temp Files and Folders created during Install
rmdir /S /Q %ExtractionPath%
del /Q "%DefaultPackagePath%\*.exe"
del /Q "%DefaultPackagePath%\*.ora"
del /Q "%DefaultPackagePath%\*.rsp"
del /Q "%DefaultPackagePath%\*.reg"
del /Q "%DefaultPackagePath%\*.zip"
rmdir /S /Q %FileFolderCleanupPath%
@ECHO The Oracle 10G installation has been Completed
pause
ODBC Script
odbcconf.exe /a {CONFIGSYSDSN "Oracle in OraClient10g_home1" "DSN=CCR|Description=CCR_data|SERVER=BWB|Database=CCR"}
As soon as the command is called I see the following error message appear.
"CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259"
The really strange thing though is that if I let the main part of the script run (Not the ODBC call) and then immediately manually start the ODBC call script it works just fine. So, I don't really understand why the script can't add it itself. Or, I can go the Administrator Tools>Data Sources (ODBC)>and then add it manually which also works. I have tried just pasting the command directly in the main script, therefore, bypassing the call feature but it doesn't make a difference.
Link (Zip with all scripts mentioned above): http://www.cbridegum.com/Fourms/Oracle/Files.zip
Has anyone ever seen this kind of issue before? Does anyone have any idea on how to fix this? Any thoughts or suggestions would be great.
Thanks so much for your help in advance,
Clif Bridegum

All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum

Does iPhoto update a gallery from the changes to the album?

When I create a web gallery I first create an album and drag photos into to. I do this in part because I also use my Apple TV to play a slideshow of albums. When I publish a web gallery of an album it uploads it just fine.
But when I add a photo to the album, it doesn't make the change in iPhoto to the gallery or online. Do I have to make the changes in both locations? That seems like extra work. Doesn't iPhoto update the galleries from the albums that created them?

Welcome to the Apple Discussions. Only photos added to the actual web gallery in iPhoto will be added to the online gallery when updated. The album you use to create the gallery is not connected in any way except as a convenient way to group the photos initially and start the gallery. You don't need an album to create a gallery.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can't create invoice from the delivery

Hello.
Ship out the trade order then i created the delivery and PGI successfully.
But when i went to VF01 to invoice the delivery i can´t create it.
I take a look to the LOG and this is what i found:
Error Log
6910517662 000010 The item is blocked for billing
I double click the item and in the configuration of Financial processing there is a field called "Block" but there is nothing selected over there. Do you have any suggestion?
I appreciate your help

The item is blocked for billing
Apart from the suggestions, if that particular material is kept open in some other system, then also, system will throw this error. Also ensure that in material master Sales Org.1 view, this material is not blocked against the field "X-distr.chain status"
thanks
G. Lakshmipathi

No xenbr while creating vm from the manager

Hi all
I am trying to create a virtual machine from the template:
Oracle Enterprise Linux release 4 Update 5 x86_64
But when I arrive to set Virtual Machine Information I cannot choose or set the xenbr for the vif, and the manager cannot make me go on without any network card.
what's happening ?
Giacomo

[root@oracolo /]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:30:05:CB:08:08
inet addr:172.16.0.243 Bcast:172.16.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3186918 errors:0 dropped:0 overruns:0 frame:0
TX packets:5251134 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1075516201 (1.0 GiB) TX bytes:2680694850 (2.4 GiB)
Interrupt:16
eth1 Link encap:Ethernet HWaddr 00:30:05:CB:08:09
inet addr:192.168.254.209 Bcast:192.168.254.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28537 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2003440 (1.9 MiB) TX bytes:84 (84.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24336 errors:0 dropped:0 overruns:0 frame:0
TX packets:24336 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4612993 (4.3 MiB) TX bytes:4612993 (4.3 MiB)
peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:28585 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2120664 (2.0 MiB) TX bytes:128 (128.0 b)
Interrupt:17
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:28537 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:84 (84.0 b) TX bytes:2003440 (1.9 MiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28339 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1578546 (1.5 MiB) TX bytes:0 (0.0 b)

Function module to create Invoice from the Delivery no ?

Hi All,
Is there any way (function module) to create an Invoice from the Delivery no and the Billing Type ? We do not want to go with BDC for transaction VF01.
Details:
We want to generate a pro-forma invoice while saving the delivery. We will have 'Special Function' (NAST-NACHA = 8) in the output determination and a routine would be called from there. That routine would contain the code to generate the Invoice. We will have only the 'Delivery no and the Billing Type' in that routine. So trying to find any function module which can create an Invoice from the Delivery no and the Billing Type.
Any suggestion / hint is welcome.
Thanks,
Ashok

Hello Ashok Satapathy ,
The only option for you is to call the FM "GN_INVOICE_CREATE" .
There is no special FM availaible to pass only the delivery number at this point.
You need to retrieve all the delivery information details and need to pass it to the FM "GN_INVOICE_CREATE".
Thanks,
Greetson

Create domain from the console?

Is the any way to create a new domain from the console? Any on-line
documents?
Thanks.
Cheers - Wei

This should be in the documentation for the management console by General
availability.
Michael Girdley
BEA Systems Inc
"Wei Guan" <[email protected]> wrote in message
news:3a22bd13$[email protected]..
Is the any way to create a new domain from the console? Any on-line
documents?
Thanks.
Cheers - Wei

Create packages from the SqlDeveloper 1.5 Extension API

How do you CREATE and EXECUTE packages and procedures from the SqlDeveloper 1.5 Extension API?
Not from the GUI... but from the Extension API.
Any kind of package, for example...
create or replace package MY_PKG is
procedure my_procedure (a number, b number) ;
end;
create or replace package body MY_PKG is
procedure my_procedure (a number, b number) is
begin
select 'x' from dual;
end ;
end;
And then EXECUTE a package from the API...
For example...
exec MY_PKG.my_procedure (1, 2)

Just use ordinary JDBC:
Using the API, you can execute a query the following way:
oracle.dbtools.db.DBUtil dbutil = oracle.dbtools.db.DBUtil.getInstance();
dbutil.execute(oracleConnection, sql, binds);
// There are various overloads and/or similar methods such as the following:
String s = dbutil.executeReturnOneCol(oracleConnection, sql, binds);
// (binds is a java.util.HashMap<String, Object>)
It's interesting to note that you can turn on and off the notification of exceptions:
dbutil.setRaiseError(false); //off
dbutil.setRaiseError(true); //on
Because of these methods, I was half expecting similar methods for executing PL/SQL.
Apparently, there isn't any equivalent method for PL/SQL and you should just use ordinary JDBC instead.

Auto populate "Territory" when creating opportunity from the Account screen

Hello there!
I need to know if it is possible to get On Demand to auto populate the "Territory" field when we are creating an opportunity (or contact for that matter) from the Account Screen.
The Account is already created, so we know what the Territory is....but when we currently go to create an opportunity from either the account screen or the contact screen we have to pick the territory again from the picklist. This is very inefficient.
If we can, can you please explain the process of doing so?
Thanks in advance!!!

use a join field value function with post default value property set to true

RBDMIDOC creates duplicateIDocs from the change pointers

Similar Messages

Maybe you are looking for