RC4 issues when moving to solaris 10
I am moving a few Solaris 8 / Sparc boxes to to be reconfigured with Solaris 10.
I have the zones up and running without too many issues; however, we are having issues with changing run level from 3 to 4 and back.
If I remember - the inittab would point to the script files that would then run scripts within /etc/rc4.d with the start / stop option.
The rc4 script would be located in both /sbin with a symbolic link to /etc/rc4
The scripts seems to work fine if I run them manually - however, they don't seem to respond to "init 3" when I am at init level 4.
What I am looking for is detailed documentation that covers creating support for run level 4.
Brad - In Colorado
P.S. We use run level 4 to activate application software on our lab computers for testing.
If this is the first time since power up that init has entered a run level other than single-user state, init first scans /etc/inittab for boot and bootwait entries (see inittab(4)). These entries are performed before any other processing of /etc/inittab takes place, providing that the run level entered matches that of the entry. In this way any special initialization of the operating system, such as mounting file systems, can take place before users are allowed onto the system. init then scans /etc/inittab and executes all other entries that are to be processed for that run level.
[http://docs.sun.com/app/docs/doc/816-5166/init-1m?l=all&a=view]
wait
When init enters the run level that matches the entry's rstate, start the process and wait for its termination. All subsequent reads of the inittab file while init is in the same run level cause init to ignore this entry.
[http://docs.sun.com/app/docs/doc/816-5174/inittab-4?l=all&a=view]
Similar Messages
-
802.1X Authentication issues when moving between switch ports
Hi Guys,
We are having some issues at our office where when users move from one switch to another, the 802.1X authentication does not want to take place. The PC just gets an APIPA address. Now I have read about features that MAC Move and MAC replace but they seem to be used when moving from one port a switch to another port on that same switch. Will MAC move help for issues between switches? And should I focus my attention on the switch's configuration or have a look at the NPS server that might be blocking that authentication as the user is already authenticated?
My configuration we have on the switch ports look as follows:
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
dot1x pae authenticator
Your help is greatly appreciated.
GrantHi Neno,
Thanks for the reply. We are using NPS on a Server 2008 R2 virtual machine. The switches are stacked 2960S-48FPS-L running 15.0(2)SE. I will quickly do the debugs and get back to you.
Here is the config:
aaa group server radius customer-nps
server name radius1
server name radius2
aaa authentication dot1x default group radius
dot1x system-auth-control
radius server radius1
address ipv4 172.28.130.52 auth-port 1645 acct-port 1646
key 7 05392415365959251C283630083D2F0B3B2E22253A
radius server radius2
address ipv4 172.28.131.52 auth-port 1645 acct-port 1646
key 7 107C2B031202052709290B092719181432190D000C
interface GigabitEthernet1/0/1
switchport access vlan 300
switchport mode access
switchport voice vlan 2
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication periodic
authentication timer reauthenticate 28800
authentication timer inactivity 1800
mab
no snmp trap link-status
mls qos trust cos
dot1x pae authenticator
auto qos trust cos
storm-control broadcast level 1.00
storm-control multicast level 1.00
spanning-tree portfast
spanning-tree bpdufilter enable -
Issue when moving between screens
Hi All,
Since we started working with Siebel 8.1 in SI we started having an unexpected behaviour when moving to another screen. Basically, when we log in Siebel PRM, we go to "Contact Screen Homepage View (SCW)" and search button is modified to go the Contact/ Opportunities view.
But if we don't want to work with contacts and try to go to another Screen ("Home Page", "Opportunity" or "Messages") instead of showing the selected screen Siebel goes to the Contact/Opportunities of the first contact found.
In case we search for a contact, go to another screen from the Contact/ Opportunities view and try to go to another screen the application works as expected.
Did anybody have the same issue? Do you knwo what can be happening?
thanks!Freezermale,
It may help to bring Excel to the foreground (by clicking the Excel icon in the Dock), then using the "Zoom" option under the Window menu.
This solved my question by VikingOSX on Oct 17, 2012 10:57 AM
Window > Zoom.
Command and + key will zoom in.
Command and - key will zoom out.
For applications that support trackpad zoom, enable Zoom in or out in Trackpad Scroll & Zoom prefs.
See video at System Preferences > Trackpad > Scroll & Zoom. Hover pointer over Zoom in or Out.
See the answer in context
how to zoom on the new mountain lion
https://discussions.apple.com/thread/4441149
All my best,
Allen -
Performance issue when moving from 4.6c to 6.0
Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware.
For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c. We've noticed other SAP area's are taking longer as well. With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer. All leading to more time to do a PGI in 6.0.
Has anyone else noticed this increase in Response time when upgrading to 6.0 ?
Thanks,
DavidHello.
Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
Run the optimizer statistics and see if it get's better.
Regards.
Valter Oliveira. -
IMac 27" inch display screen flicker issue when moving files
Whenever a drop a file from Finder to my desktop, the screen flickers. Occasionally, when I move a window, it also flickers, but it's a more consistent problem when dropping the files on the desktop. It only flickers once and returns to a completely normal state.
It does NOT happen when going the other way - from the desktop to Finder.
I purchased the iMac AFTER the original firmware updates, so I haven't had to install any of them from the original problem a couple years ago.
I am wondering if this is a problem that is discussed or if there are any suggestions.
Thanks....I'm having the same problem. Here are the details I was about to post as a separate thread:
27" iMac 2.7GHz Intel Core i5 with 16Gb RAM. I'm also using a 20" ACD alongside, a set up I have used with my previous 24" iMac. The ACD is being used as an extended desktop (not mirrored).
I've just started noticing an odd effect: When moving a file from a folder onto the desktop, the entire iMac screen flickers and breaks up momentarily before reverting to normal. It is an effect which lasts a fraction of a second and is visually very intrusive.
Weirdly, if I move the file but continue to hold it for a second before releasing to place it on the desktop, there is no flicker.
Similarly, if I open another folder and place the window alongside, moving a file from window to window produces no flicker. It only happens when moving something to the desktop.
The effect does not happen if the ACD is turned off (but connected) or the ACD is used in Mirror mode.
Does this sound like a hardware or software fault? -
UTF issue when moving from cf5 to cfmx7
It's been long overdue so am moving from CF5 to cfmx7 on my hosting account.
The issue is that my hosting account has disabled cfcontent.
I am getting gibberish outputting utf data from my database. It works fine on cf5 but on cfmx7 I read someplace that you have to use cfcontent to output utf-8 correctly.
Is there any work around without having to use cfcontent?
I tried using cfprocessingdirective and cfheader tags to show utf but it didn't work. Any pointers or suggestions appreciated.
Best Regards
Sanmanok, since it's "N" you should be good to go with transferring the data (it's
actually pretty simple). in cf5, write a page that does a simple query against
the table(s) containing your data, i guess just select TOP 100 or so rows with
the PK & the nText columns. simply output that query using a delimiter that you
can parse easily (commas between columns & quotes for the nText would be my
default choices). have a look at the output to make sure it's readable. if all's
well, on the cf7 (or whatever) box do a cfhttp call to that cf5 page & dump out
the cfhttp.fileContent or result if you use that. if it's still readable, then
you can do the real xfer by:
- backing up the original table
- double checking that the backup is ok
- triple checking that the backup is ok
- adding another table w/just PK & nText columns
- filling that with the properly encoded data
- then do a join UPDATE against the old table -
Quality issue when moving clips from events to project
When I drags clips or parts of clips from events to my project, the quality drops significantly (blocking).
Original clip (H264 encoded SD video) is fine, when imported into imovie it is still fine when skimmed/viewed in the event but as soon as draged into the project, the quality is bad (when skimmed/viewed in the project) and blocking occurs, especially in dark parts of the video. Of course this bad quality remains on the exported video :-(((
Any idea where this might come from and how to overcome it ?
Thx for your supportApologies for bumping this again, but I'm getting the same issue and I'm wondering if it's the original HD files that are incompatible in imovie. It's odd that only a few of us are reporting it.
I'm capturing HD video in mov format (motion jpeg) from a panasonic FZ5 still camera. The footage has been imported via iphoto. It's 30fps - not the native uk frame rate - but I can't change this on the camara. When I edit in imovie, I get the same massive drop in quality as soon as I move an event to the timeline. Blocking especially on blocks of colour. This happens on playback from the timeline within imovie and on export. I've tried creating a project in both pal format and ntsc in case the frame rate is the issue. No joy. In Final cut the problem seems not to exist, but I'd prefer to manage these very simple home movies in imovie.
I'm now wondering whether to switch to a different still camera like the newer panasonics or sony hx5 as these capture in avchd (presumably 25/50 fps if sold in uk) and might get over the problem. any thoughts? -
Disco Plus 10g Performance Issue When Moving Table Headings to Page Items
Hello,
We are experiencing an performance anomaly in Discoverer Plus (the latest release: 10.1.2.48.18), and are wondering if anyone else out there has noticed similar behavior. We're having trouble identifying the cause, and have a TAR openned with Oracle support but they are not able to reproduce our issue, and have been slow to offer suggestions or help.
The issue happens when a user drags a table heading up into the page items area in a worksheet. When we move a heading up to the page items it works quickly one time, but then, every time after that, it takes anywhere from a few minutes up to HOURS to move any additional headings up to the page items area.
The problem occurrs on approximately 3 out of every 5 of our workbooks. We've tried different sizes of workbooks, with large (several million records) and small (a few thousand records) datasets, and none of this seems to affect the issue at hand. The problem only occurs in Discoverer Plus, not Desktop. We've also spent some time researching caching and memory configuration, and believe that we have setup all of the recommended options for maximum performance on our systems.
I would just like to know if anyone else out there in the community has experienced the same issue, and if anyone has any advice for us.
Thank you,
-ScottHi,
I found the following on Best Practices of Orcle Discoverer 10g by
Mike Donohue - Product Management - Oracle Business Intelligence
Performance Parameters and Page Items
Page Items provide very responsive, interactive manipulation of data
At a cost:
Forces retrieval of all Detail values
Incremental increases of memory as indices are built
Parameters reduce result set, improve performance
Use Page Items only when needed 2 to 3 with < 12 values each
Performance Parameters and Page Items - example
Loc(3), Dept(10), ProdType(50), Prod(1,000), Date(365)
547,500,000 potential rows/combinations (3*10*50*1000*365)
Use parameters for Loc, Dept, ProdType, and 90 day date range
90,000 potential rows/combinations (1000*90)
Reduce data retrieved by ~ 6000 X
Improve performance by several orders of magnitude
I hope this will help you! -
Categorizing issues when moving Elements 10 from one PC running XP to Windows 7
I purchased a new desktop that is Windows 7 based and had to reinstall Elements from XP. I saved all my 13,000 photos to an external drive and then downloaded them onto my new desktop with Elements 10. I noticed that the photos were NOT categorized. How do I correct this?
Thank you for this information. I am currently performing a full backup of my photos (13,000 photos) to an external drive from my old PC (old PC is about 5 years old). So far it has been running about 24 hours. Do you have any idea how long it should take for this many photos to be backed up on a PC that is this old? Any guidelines would be appreciated…..
Pete -
Mid 2010 macbook pro freezes and restarts when moved.
My macbook pro crashes daily and sometimes I have to keep turning it on for about 5 minutes because it doesn't start up it just beeps. once it starts up it tends to crash when moved even slightly. I have the crash reports and I'm hoping someone can help me. This problem started to occur once I upgraded to mountain lion and I dont know if the problem has to do something with mountain lion or if it's just coincidence. I searched around on the web and think that maybe it is my logic board. Thank you in advance.
9/9/12
Sun Sep 9 21:43:33 2012
panic(cpu 1 caller 0xffffff800e2b7b95): Kernel trap at 0xffffff800e22e55f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80af934030, CR3: 0x00000000354c0000, CR4: 0x0000000000000660
RAX: 0xffffff80af934000, RBX: 0xffffff8022e0c550, RCX: 0xffffff80f6b4bf80, RDX: 0xffffff800e22e9d0
RSP: 0xffffff80f5fe38f0, RBP: 0xffffff80f5fe3960, RSI: 0xffffff80f6b48000, RDI: 0xffffff8022e0c550
R8: 0xffffff802453b550, R9: 0x7ffffffffffffffe, R10: 0xffffff8022e02148, R11: 0x0000000000000246
R12: 0xffffff80ef934000, R13: 0x0000000000000000, R14: 0xffffff802453b550, R15: 0x0000000000000000
RFL: 0x0000000000010086, RIP: 0xffffff800e22e55f, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80af934030, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80f5fe3590 : 0xffffff800e21d5f6
0xffffff80f5fe3600 : 0xffffff800e2b7b95
0xffffff80f5fe37d0 : 0xffffff800e2ce4ad
0xffffff80f5fe37f0 : 0xffffff800e22e55f
0xffffff80f5fe3960 : 0xffffff800e22d9dc
0xffffff80f5fe39a0 : 0xffffff800e21b67d
0xffffff80f5fe39e0 : 0xffffff800e2b74ba
0xffffff80f5fe3bb0 : 0xffffff800e2ce4ad
0xffffff80f5fe3bd0 : 0xffffff800e2b1d93
0xffffff80f5fe3ce0 : 0xffffff800e22e519
0xffffff80f5fe3d60 : 0xffffff800e22d9dc
0xffffff80f5fe3da0 : 0xffffff800e54f15b
0xffffff80f5fe3e10 : 0xffffff800e54e78b
0xffffff80f5fe3f20 : 0xffffff800e54e344
0xffffff80f5fe3f50 : 0xffffff800e5e17da
0xffffff80f5fe3fb0 : 0xffffff800e2cecf3
BSD process name corresponding to current thread: Safari
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x000000000e000000
Kernel text base: 0xffffff800e200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 820893131544
last loaded kext at 25461220751: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f8f91a000, size 28672)
last unloaded kext at 256013252037: com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0xffffff7f8e9fe000, size 24576)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleHDA 2.3.0f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleBacklight 170.2.3
com.apple.GeForce 8.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.XsanFilter 404
com.apple.BootCache 34
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AirPort.Brcm4331 601.15.21
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.security.quarantine 2
com.apple.nke.applicationfirewall 4.0.39
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 7
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Process: powerd [17]
Path: /System/Library/CoreServices/powerd.bundle/powerd
Identifier: powerd
Version: 321.5.3
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 0
Date/Time: 2012-09-07 19:24:11.479 -0700
OS Version: Mac OS X 10.8.1 (12B19)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** CFRelease() called with NULL ***
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00007fff92f02f18 CFRelease + 40
1 powerd 0x000000010b45e458 0x10b45b000 + 13400
2 powerd 0x000000010b45f72d 0x10b45b000 + 18221
3 libdispatch.dylib 0x00007fff935e90fa _dispatch_client_callout + 8
4 libdispatch.dylib 0x00007fff935eb2d7 _dispatch_source_invoke + 691
5 libdispatch.dylib 0x00007fff935ea349 _dispatch_queue_invoke + 72
6 libdispatch.dylib 0x00007fff935ee0cd _dispatch_main_queue_callback_4CF + 220
7 com.apple.CoreFoundation 0x00007fff92f2f81e __CFRunLoopRun + 1614
8 com.apple.CoreFoundation 0x00007fff92f2edd2 CFRunLoopRunSpecific + 290
9 com.apple.CoreFoundation 0x00007fff92f3da81 CFRunLoopRun + 97
10 powerd 0x000000010b461209 main + 2157
11 libdyld.dylib 0x00007fff8a4857e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8cb72d16 kevent + 10
1 libdispatch.dylib 0x00007fff935ebe26 _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff935eba2a _dispatch_mgr_thread + 54
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00007fff93087a97 rbx: 0x00007fbab240b400 rcx: 0x00007fbab241f838 rdx: 0x0000000000000001
rdi: 0x0000000000000000 rsi: 0x00007fff87bac068 rbp: 0x00007fff547a3ed0 rsp: 0x00007fff547a3e90
r8: 0x00000000000000ec r9: 0x00000000b987c4c1 r10: 0x00007fbab2403630 r11: 0x00007fff793904e0
r12: 0x000000010b47d5c0 r13: 0x000000010b47d8c0 r14: 0x00000000000000ec r15: 0x0000000000000000
rip: 0x00007fff92f02f18 rfl: 0x0000000000000246 cr2: 0x0000000104408000
Logical CPU: 0
Binary Images:
0x10b45b000 - 0x10b478fff powerd (321.5.3) <63728D05-176A-33F6-B5CB-C5FBA0DF9DC4> /System/Library/CoreServices/powerd.bundle/powerd
0x7fff6b05b000 - 0x7fff6b08f93f dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
0x7fff87b91000 - 0x7fff87bb3ff7 libxpc.dylib (140.37) <C552985C-2171-3136-A1B9-3AB21CBF7C4A> /usr/lib/system/libxpc.dylib
0x7fff87bb8000 - 0x7fff87bbefff com.apple.DiskArbitration (2.5 - 2.5) <348AC0CC-6BCE-3416-9141-A5C1164EDDFF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff87c1d000 - 0x7fff87c25fff liblaunch.dylib (442.21) <224CB010-6CF8-3FC2-885C-6F80330321EB> /usr/lib/system/liblaunch.dylib
0x7fff88124000 - 0x7fff88324fff libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
0x7fff88325000 - 0x7fff88338ff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
0x7fff8963e000 - 0x7fff8963fff7 libdnsinfo.dylib (453.16) <38A3E0F4-E34C-3D45-A2C9-4CDE2DF007BD> /usr/lib/system/libdnsinfo.dylib
0x7fff896c6000 - 0x7fff89792fef libsystem_c.dylib (825.24) <16B6B86C-53EE-36E8-AC2B-4AADC1008098> /usr/lib/system/libsystem_c.dylib
0x7fff89f9b000 - 0x7fff89fa6fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
0x7fff8a062000 - 0x7fff8a0b3fff com.apple.SystemConfiguration (1.12 - 1.12) <7A8300B5-F5B3-39F0-A4B2-4C0C293FA29F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8a483000 - 0x7fff8a486ff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
0x7fff8a6e5000 - 0x7fff8a709ff7 libc++abi.dylib (24.2) <340E7C7B-DC93-3AA2-B015-B1C9541EC255> /usr/lib/libc++abi.dylib
0x7fff8a70a000 - 0x7fff8a738ff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
0x7fff8a739000 - 0x7fff8a7a6ff7 com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8bb9e000 - 0x7fff8bc9bfff libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
0x7fff8be8e000 - 0x7fff8beddff7 libcorecrypto.dylib (106) <57BC99C6-3C3F-344C-BDD6-25E845D956F2> /usr/lib/system/libcorecrypto.dylib
0x7fff8bff1000 - 0x7fff8c109a27 libobjc.A.dylib (532) <9FA80CDA-97F4-3801-8879-0C1B976BC5CA> /usr/lib/libobjc.A.dylib
0x7fff8c10d000 - 0x7fff8c112fff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
0x7fff8ca10000 - 0x7fff8ca1eff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
0x7fff8cb5b000 - 0x7fff8cb5cfff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
0x7fff8cb5d000 - 0x7fff8cb5fff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
0x7fff8cb60000 - 0x7fff8cb7bff7 libsystem_kernel.dylib (2050.9.2) <F646589B-13F8-3685-8C17-92C77993AE86> /usr/lib/system/libsystem_kernel.dylib
0x7fff8cc4e000 - 0x7fff8cc4efff libOpenScriptingUtil.dylib (148) <4DB14EC4-422C-3AE8-83BF-354FEC197FD3> /usr/lib/libOpenScriptingUtil.dylib
0x7fff8cd21000 - 0x7fff8cd27ff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
0x7fff8da48000 - 0x7fff8da57ff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
0x7fff8da6c000 - 0x7fff8dab8ff7 libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
0x7fff8df7c000 - 0x7fff8df7cfff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
0x7fff8f3ec000 - 0x7fff8f3edff7 libSystem.B.dylib (169.3) <365477AB-D641-389D-B8F4-A1FAE9657EEE> /usr/lib/libSystem.B.dylib
0x7fff8f5ae000 - 0x7fff8f87bff7 com.apple.security (7.0 - 55178.0.1) <8102877E-C866-33D4-A947-02FC7F4BAA95> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff8f87c000 - 0x7fff8f979ff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
0x7fff8ff4a000 - 0x7fff8ff5cff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
0x7fff90715000 - 0x7fff9071bfff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
0x7fff90789000 - 0x7fff9078afff libDiagnosticMessagesClient.dylib (7) <56A70657-E8C2-3804-AB87-77DC100512A4> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff9078b000 - 0x7fff9078ffff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
0x7fff9173c000 - 0x7fff9174aff7 libkxld.dylib (2050.9.2) <4BEE9BC3-3708-330E-89D6-03E715D712CC> /usr/lib/system/libkxld.dylib
0x7fff91f63000 - 0x7fff91f6bff7 libsystem_dnssd.dylib (379.27.1) <B9F7B01D-8FAF-3CA5-909E-4D52B8D2DD8A> /usr/lib/system/libsystem_dnssd.dylib
0x7fff923cc000 - 0x7fff92434ff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
0x7fff9299a000 - 0x7fff9299ffff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
0x7fff92efa000 - 0x7fff930e3fff com.apple.CoreFoundation (6.8 - 744) <47AEA7C7-EF9B-3FC6-AEBF-CE02FC650301> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff930f8000 - 0x7fff93105fff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
0x7fff931ed000 - 0x7fff931effff libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
0x7fff935e7000 - 0x7fff935fcff7 libdispatch.dylib (228.18) <0B6B6E7F-4D8A-3F3B-A4BF-6CF34638DBBB> /usr/lib/system/libdispatch.dylib
0x7fff935fe000 - 0x7fff93605fff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
0x7fff93606000 - 0x7fff9363cfff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
0x7fff9363d000 - 0x7fff9363eff7 libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
0x7fff93c7d000 - 0x7fff93c8bfff libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
0x7fff93c8f000 - 0x7fff93cf8fff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
0x7fff9454c000 - 0x7fff9454dff7 libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 179
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=67.7M resident=47.6M(70%) swapped_out_or_unallocated=20.1M(30%)
Writable regions: Total=29.1M written=560K(2%) resident=648K(2%) swapped_out=0K(0%) unallocated=28.5M(98%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 20.3M
MALLOC guard page 32K
STACK GUARD 56.0M
Stack 8712K
VM_ALLOCATE 8K
__DATA 1448K
__LINKEDIT 52.8M
__TEXT 14.8M
__UNICODE 544K
mapped file 18.1M
shared memory 12K
=========== =======
TOTAL 172.7MThere was a similar thread in here yesterday.
This can be a mechanical issue: a loose connector, broken wire or cracked logic board that causes power from the battery to be interrupted when the Mac is jostled. Unless damage is grossly evident, tracking down the exact point of failure is an exasperating Sherlockian exercise. -
Voicemail access issue when migrated to new Domino server
st1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
At the current time we have one Domino v7.0.4 server (Win2k with DUC v1.2.3) in production and our clients are running Notes v7.0.4 client with DUC v.1.2.3 installed on them. This setup has been working great in our Unity v5.0(1) environment. We are looking to migrate our users to a newly installed Domino v8.5.1 (Win 2008 x32 DUC v1.2.5) server in the near future but out test users are running into a problem.
When a user gets migrated over to our new Domino server the client can no longer access their voicemail via TUI. During the user migration process we do change the pointer in Unity to their mail file on the new Domino server. When the user logs in they receive "Your messages are available now"
If we migrate the user back to the old v7.0.4 server they can access their voice mail with no issues.
Any feedback you could provide would be great. Thanks!Hi Kenneth,
Could you clarify what you mean by "During the user migration process we do change the pointer in Unity to their mail file on the new Domino server"? Typically when moving a user's mail file to a new Domino server, Unity should automatically pick up those changes. Are you pehaps creating a new mail file and pointing Domino to it instead of moving it? If that is the case, the new mail file would not have been DUCS enabled, a process it must go through before Unity will be able to access it properly. The only way to force that to happen would be to reimport the user into Unity. If the mail file is properly migrated, however, the mail file should remain DUCS enabled and there would be no need for this.
An easy way to determine whether the user is DUCS enabled is using the DUT tool. It is located on the Unity server under \Commserver\Utilities\Domino\DUT. It will show you a list of all of your users. Compare the values you see in the UCProfile section for a working / non-migrated user to a failing one. You might also want to verify that it lists the updated mail server and mail file for the user.
Also, while I don't think it would cause this particular problem, you should be aware that Server 2008 is not currently a supported platform for DUCS/CsServer 1.2.5, see page 6 in the admin guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/duc/admin/guide/cuducag.pdf
Hope this helps,
Pat -
Flex app doesn't work when moved from original location
I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers -
Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly
Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog -
Urgent help - PO issue when receiving
Dear gurus
i have an urgent production issue, i have done a mass conversion of all the master data from one plant to another, the scenario is that they are closing down and stopping operations at old plant and moving the entire operations to new plant under the same company code, so for this i did the entire MM master data conversions
i also changed the delivering plant and address using MASS T-code for all the open PO's line items from old plant to new plant (some of line items had partial open qty and some of them entire open qty)
<b><u>1st issue:</u></b>
But when i am doing VL31N inbound delivery, the PO qty is NOT showing up automatically in the delivery qty field, so it is causing issues when trying the do a GR
<b><u>2nd issue</u></b>
also another issue is that in the Goods Movement Data tab while using VL31N for GR, it is by default showing the old plant still and is grayed out even though the PO line item contains the new plant code and delivery address, so how can we change the receiving plant to new plant and why it is not picking the new plant still
so can you please help me on this issue and let me know if there is any settings or resolution
thanks a lot in advance and appreciate your expert advices
chakridear chakri,
you have written that you have converted the material master data, but what about the existing puchase orders, you have to copy all the orders in the new plant .
or if possible try to chane the delivery address in in the item details of the P.O.
rewards if useful.
ashish -
I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?
Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx
Maybe you are looking for
-
Hi, I want to display report output like below . how can i bulid the internal table means can i hardcode the field1. how can i do the subtotals and totals i know the doing subtotals and totals in alv based on some field. field1
-
Solid Orange Light When Charging, Yet Ipod Broken?
So, at some point in the past I walked into the ocean with my IPod shuffle. Yes, stupid move, I know. Anyway, it still worked for a little while afterward, and I got a new IPod, which got stolen. So, recently I've been trying to get this IPod Shuffle
-
Sample Edit window - no waveform display
When I have a pretty loaded up song that's stretching the memory I find that if I try to open an audio file in the sample edit window the window is just blank with no waveforms or menues. Re-booting can solve the problem for a while then it returns m
-
2 iphones 1 comuter - how to get 2 different calendars and contacts on each
I have been using my iphone 3G for a few months and syncing to outlook for contacts, calendar and notes. My wife has just got her own phone (3G). She logs in to the computer with her own account and has her own itunes library so there is no problem w
-
Hi, I am not able to start OIM Weblogic.Getting following error in the log ERROR,01 Apr 2010 18:58:50,285,[org.apache.beehive.netui.pageflow.internal.AdapterManager],ServletContainerAdapter manager not initialized correctly. ERROR,01 Apr 2010 18:58:5