RC8 while transporting a Table

Hello Expert,
       I am facing an issue. In a custom table I change the search help of fields and transport the same. While transporting the table I am having RC8 and table is partially active to destination server. I know we can use FM DDIF_TABL_ACTIVATE to resolve such type of issue but I want to know why we are facing such type of problem.
Error message. 
Custom table Name: ZCS_FSETBO_ARCH1
Activate dependent view /1SAP1/CNV_B2559
Field ZCS_FSETBO_ARCH1-ROWID does not exist
Key field ZCS_FSETBO_ARCH1-AUTYP missing. Specify maintenance status 'read only'.
Key field ZCS_FSETBO_ARCH1-PERNR missing. Specify maintenance status 'read only'.
Key field ZCS_FSETBO_ARCH1-VORNR missing. Specify maintenance status 'read only'.
Key field ZCS_FSETBO_ARCH1-ZSPMON missing. Specify maintenance status 'read only'.
Key field ZCS_FSETBO_ARCH1-Z_OBJID_STR missing. Specify maintenance status 'read only'.
View /1SAP1/CNV_B2559 was not activated
Please help me.
Regards
Swati

Hello Expert,
    To my understanding we do use se14 when there is some change in fields type(lenght increase/decrease) or add or remove any fields.
In this case also se14 required.Can you please confirm me that.
Regards
Swati.

Similar Messages

  • Table could not be activated - Error while transport

    Hi all,
    I've created a table in one server under a transport request. Co-file and data-file are download for the same and imported into another system (development server). Import is successful and working fine. But, while transporting the table to quality server following error is coming even table is activated.
    Table TABNAME could not be activated (E- Nametab for table TABNAME cannot be generated )
    Kindly let me know what might be the problem.
    Thanks in Advance.

    Hi Siva,
    First check Transport request for extended check and consistency check. You will get errors. If there is no errors then goto se14
    database utility and give the table name and click edit and select the adjust database table . Your problem will be solved.
    Let me know if you have any further errors while doing this.
    thank you
    srinivas

  • Problem while transport table entries (TFRM)

    Hi ,
    An routine has been developed earlier, It has been release but not moved to Quality. In the same request there are another 3 or 4 tasks which i don't want to transport. So created a new request all the coding part is saved. But when i am trying to transport the table Entries of TFRM into a transport request i am getting an error as specified below.
    Fill table key for table TFRM only up to position 007 only
    So can any one help me out in resolving the issue.
    Thanks In Advance.
    Ramana

    Hi Soniya,
    That is not the issue, when i create a Routine using VOFM transaction at the time of creation it self entries will be created in the table TFRM, but since the request has been release I need to go alternative way to transport the entries. So I am trying to transport the entries into a request.that time I am getting error.
    Thanks & Regards,
    Ramana

  • Error while transporting a Workbook

    Hi Pioneers
                  I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".     
        Could u let me out with a possible solution....Plz...
    BR
    Sekhar.D.R

    Hi,
    You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Error while transporting function grp from lower version to higher version

    Dear Experts,
      While transporting the function group and function modules from system A to system B, I am getting the below error
    "Program SAPLZATSCSNG_EINB, Include LEINBF10: Syntax error in line 000068
    Field 'GF_ETS_MODIFIED' is unknown. It is neitherin one of the specified tables nor defined by a 'D"
    System A is a lower version SAP system and system B is a higher version. I compared the code of Include LEINBF10 in both the systems and there is a data declaration of field GF_ETS_MODIFIED in system B. But this is missing in system A.
    Please guide me for this issue.
    Thanks in advance.

    Thankyou for your reply Rob.
    Actually I am transporting the function group and modules from my development system to the client development system.
    I dont have any other option but transport the files.
    Is there any possibility to modify the include without applying a patch or upgrading my system?
    Edited by: ShwetaD on Apr 15, 2010 10:24 PM

  • Error while transporting custom datasource

    Hi All,
    Below is the scenario that was carried out in my project.
    1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
    2. Created a custom Datasource ZABC_TEST with the above table.
    3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
    4. Tried transporting the above. But trows error while transporting the data source.
    Error -- InfoSource ZABC_TEST is not available in source system BITST.
    Let me know what can be done to solve the above error. Please suggest if i have missed out something.
    Thanks in advance.
    Maddy

    HI,
    The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
    Transport first the DS in a request, then in another request transport the OHD.
    This should resolve the issue.
    hope this helps.
    thanks,
    rahul

  • Error while transporting the TR to production

    Dear experts,
    I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

    Hi,
    this looks like you forgot a transport request or have transported in the wrong order.
    Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
    Regards,
    Klaus

  • Error while transporting Openhub (BI7)

    Hi Gurus,
    I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
    "Unable to activate table /BIC/OHZxxxxxx ."
    When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
    Why this error is happening?
    Regards,
    Raghavendra.

    Hi Raghavendra,
    There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
    and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
    Please create one more transport request and validate the tr objects...
    Best Regards,
    maruthi

  • Error while transporting Infocube

    Hello all,
    i am getting following error while transporting infocube to testing system.
    Please see the bellow error message details.
    Error/warning in dict. activator, detailed log    > Detail
    Structure change at field level (convert table /BIC/DZMD_Y_MR2)
    Structure change at field level (convert table /BIC/FZMD_Y_MR)
    Table /BIC/DZMD_Y_MR2 could not be activated
    Table /BIC/FZMD_Y_MR could not be activated
    Return code..............: 8
    Following tables must be converted
    ZMD_Y_MR InfoCube could not be activated
    Thanks in advance.
    BR,
    YVReddy

    Dear Venkat,
    Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
    for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
    regards,
    Srini

  • Error while transporting 0MAT_PLANT

    Hi Experts
    I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
    it is giving the follwoing error with return code 8
    Characteristic 0MAT_PLANT: Master data has to be activated before conversion
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
    BW-WHM (Warehouse Management)
    I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
    1.Is it because we have large no of records in Prod system ..??
    2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
    3.Is it related to any database error in adjusting P table in Prod...?
    Please let me know anybody faced this kind of problem.
    Regards
    Prasad

    Hi Prasad,
    Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
    1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
    The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
    2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
    Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
    Please decide accordingly as there is a trade off here!
    -VA
    Edited by: Vishwa  Anand on Sep 27, 2010 12:15 PM

  • Error while Transporting Update Rules.

    hi xperts,
       I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
        Start of the after-import method for object type R3TR ROUT (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Is the  error,I didn't change any thing in the Cube or changes to Update rules.
    Can anybody Help me?.
       thanking you,
                                   with regards,
                                   Narendra.

    Hi,
    Are you still facuing the issue ?
    No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
    If you know the technical names of the routines you can check in the TADIR table.
    Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
    Hope it helps.
    Thanks,
    Soumya

  • Error while transporting database index into quality system

    Hello,
    I am getting an error while transporting a new index in quality system.
    I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
    While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
    I retransported the objects using a new request. However I still got the same error.
    Please help.

    Navin,
    No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
    K.Kiran.

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

    Hi Friends,
    I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
    If I check the log in SM37 of target system it gives following steps
    29.06.2007 11:37:21 Job started
    29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
    29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
    29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
    29.06.2007 11:37:30  CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
    29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
    29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
    29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
    29.06.2007 11:37:30 0000000016 K NEXT        0000000160 K MINEXTENTS
    29.06.2007 11:37:30 0000000001
    If I see the short dump in ST22 in target system (quality) The I get error
    "Runtime Errors         GETWA_NOT_ASSIGNED"
    Could somebody help me in resolving this?
    Thanks and regards,
    Balaraj

    Thanks Edwin,
    My issue is still not resolved.
    Now the error that I am getting while transporting the Transformation is
    Program terminated (job: RDDEXECL, no.: 12091300)
    The SM37 job log says that
    "Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server bdhp4488 were synchronized
    ABAP/4 processor: GETWA_NOT_ASSIGNED
    Job cancelled"
    When i see the dump in ST22. It says that it could not find entry in one of the tables
    "   READ TABLE p_t_mapping ASSIGNING <fs_map>
       WITH KEY target_stepid = 0
                targetsegid   = <fs_posit>-rulesegid
                targetposit   = <fs_posit>-ruleposit
                targetid      = 0.
    Sy-subrc <> 0 for this read.
    Could you please advise?
    Thanks and regards,
    Balaraj

  • Error in WB Request while Transporting on STMS

    Hi all,
    I have a WB transport Request for my Report, where the Request contains Data Elements, Programs, SE11 Table, TMG, Screens, Tcode related to my development. Now, while moving the request from DEVELOPMENT  to QUALITY system on STMS, it ended with ERROR 8.How can I know, in which object there is an Error while transporting.
    My error is shown as..
    Generation of Programs and Screens  --- (8) Ended with errors

    Dear Sekhar,
    I think some object or component is missing in transport request, like function group, screen parameters or any one in your program. Activate all  objects and resend dev to qas. If again same issue, you delete the request and generate new request.
    Best of luck.
    Regards,
    Abbas.

Maybe you are looking for