RDP per pool information not available

Dear all,
i setup VDI using mysql bundled cluster. and i can access Administration GUI both VDI and sunray. but in VDI under pools category there is a settings tab but there is no information about RDP per Pool settings.
there is nothing shown.
what couldbe the problem
Thanks

In pools there is no option as Edit RDP settings
i cannot see anything at all

Similar Messages

  • Characteristics Remittance information not available in infoprovider

    Hi All,
    When I run query from portal it get error : 500 Internal Server error                                                  Bex Web Application
    FAILED TO PROCESS REQUEST, CONTACT YOUR SYSTEM ADMINITRATOR
    ROOT CAUSE:
    Characteristics Remittance information not available in infoprovider
    ABEND BRAIN(635) QUERY COULD NOT BE OPENED.
    NOTE: THIS QUERY RUNS ON MULTIPROVIDER., ANY URGENT HELP WILL BE APPRECIATED, POINT WILL BE ASSIGNED
    Thanks in advance
    Hunna

    Hi,
    Try activating multiprovider and underlying infocubes, using following programs.
    Multiprovider: RSDG_MPRO_ACTIVATE
    Infocube: RSDG_CUBE_ACTIVATE
    DSO: RSDG_ODSO_ACTIVATE
    InfoObject: RSDG_IBOJ_ACTIVATE
    Then try to run the query, alternately you can use transaction RSRT.
    Regards,
    Durgesh.

  • I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

    i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
    thank you

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • MMC for Portal - Status of jcontrol.EXE  - information not available

    Hi All
    I am having an issues with our Portal MMC, in the status of the jcontrol.EXE we are getting the message "information not available". The portal actually starts up ok and can be used, however I am concerned that there are other issues which have not yet been reported.
    I have looked through the defaultTrace.0.trc and cannot see anything obvious that points to an issue.
    Does anyone have any ideas?
    We are have Netweaver Portal 7 SP18
    Thanks
    Phil

    Unfortunatelly the http://hostname:5113/ does not display anything.
    The jcmon seems fine:
    SAP System Name   : EPD
    SAP System        : 04
    MS Host           : perth
    MS Port           : 3903
    Process Count     : 3
    PID of JControl   : 3928
    State of JControl : All processes running
    State inside MS   : All processes running
    Admin URL         :
    Idx
    Name
    Type
    PID
    State
    Err
    or
    Restart
    Debug
    Debug
    Debug
    Cou
    nt
    Mode
    Prep.
    Mode
    Port
    0
    dispatcher
    J2EE Dispatcher
    6368
    Running
    0|yes    |no   |no   | 50000|
    1
    server0
    J2EE Server
    6360
    Running
    0|yes    |no   |no   | 50421|
    2
    SDM
    SDM Server
    6352
    Running
    0|yes    |yes  |no   | 50002|
    SAP System Name   : EPD
    SAP System        : 04
    MS Host           : perth
    MS Port           : 3903
    Process Count     : 3
    PID of JControl   : 3928
    State of JControl : All processes running
    State inside MS   : All processes running
    Admin URL         :
    Idx
    Name
    PID
    State
    Error
    Restart
    0
    dispatcher
    6368
    Running
    0
    yes
    1
    server0
    6360
    Running
    0
    yes
    2
    SDM
    6352
    Running
    0
    yes
    ============================================================
    JControl Monitor Program - Administration Menu  (Local)
    Instance : JC_perth_EPD_04

  • Why does photo information not available when you email a photo?

    Why does photo information not available when you email a photo?

    How are you mailing from iPhoto? If you have iPhoto set to mail using Mail.app, you can set what will be included, when you mail with Share > Mail:

  • HT2534 Keep getting billing information not available try later on my account

    Keep getting billing information not available. Try again later on my account

    If you are in Australia then other people are reporting the same problem e.g.
    https://discussions.apple.com/thread/5267688?tstart=0
    I'm not sure if it's affecting people in other countries as well

  • I erased my disk and tried to reinstall Mavericks but "installation information" not available?

    I decided to erase the disk on Macbook Pro late 2011 model and do a clean reinstall of Mavericks.  When I tried to restore the software I get an error message that says something like "installation information for this machine is not available - call AppleCare".   Any suggestions?  Thanks.

    Hey LGStrazz, 
    If you are getting an alert to contact AppleCare, then start with the link below to get that started.  
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Regards,
    -Norm G.

  • Information not available

    I tried to sign on to access my account but it said my cell phone information was not available at this time. I also can't receive text messages right now, its 3:26am. 
    Anyone else having this problem or is it just me?

    It takes a certain amount of hours for the usage to appear on a account. As for the text messaging issue,try powering off your device & removing the battery for awhile

  • Server Description, Domain, WorkGroup information "Not Available"?

    Hi Everyone,
    Not that this is causing an issue with the performance of a couple of our servers (but more so for reporting of these servers via tools such as SCCM), I have a few servers which are showing the Computer Description and Workgroup or Domain values as "Not
    Available".
    Please see screenshot for more information
    Has anyone else come across this sort of issue? If so, how was this resolved?
    Thanks in Advance,
    Simon

    @Simon,
    I've not personally come across this issue, but it seems likely that an access-denied situation might cause this.
    e.g., "something" is blocking or has removed permissions to the registry keys or WMI class where this information is stored.
    Perhaps in WMI: Win32_OperatingSystem.Description, and, Win32_NTDomain.Description, or, Win32_ComputerSystem.Workgroup ?
    What do you get, if you execute: systeminfo
    Or: SystemPropertiesComputerName.exe
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
    Hi Don,
    I'll give this a try and let you know. Thanks for the response.
    Regards,
    Simon

  • Cddb information not available

    since installing itunes 5 i must type in all my track names from commercial cds by hand. i have tried "get cd track names" but i get the same message every time (cddb info not available). these are not rare or unusual cds and, in fact, when i go to the cddb website the tracks are listed there. i have disabled my firewall with the same result. i can access and download from itunes and have broadband internet access.i'd appreciate any thoughts. thanks

    Most of the post over in the forum
    http://discussions.info.apple.com/webx?14@@.68a5059b
    are due to firewall, anti-virus, adaware settings and the like.
    For a test, if you disable all those types programs, can you get to CDDB?

  • !!URGENT!! Type Pool DMUT not available in 45B

    Dears,
    Please can you suggest a solution for this. The type- pool/group DMUT does not exist in SAP version 45B. I want to use a FM ( coded in v5.0) which uses this type-pool.
    Is there any other type-pool/group which could be used as an alternative in older versions of SAP.

    If this is a standard function module, this may not exist in earleir version. Are you plannign to copy this from 5.0?
    In this case create the type pool along with the function module.

  • Module Pool TCode not available in production

    Hi Friends,
                  I have developed a module pool program and assigned a transport request number and transported to production.
    The transport request has been successfully moved to production server. But in production system, Iam unable to run the transaction code.
    In production, when i open the modulepool program , under " display object llist ",  it is not displaying the transaction code.
    What could be the problem.
    Is there any separate transport request number for custom transaction along with module pool program? if so, How to identify.
    Please suggest me.
    Thank you,
    Murali Krishna T.

    Hi Murali,
    Have you tried to execute the transaction from application toolbar.
    If it gives a message like...."Transaction does not exist" then you need to check the same on development server that whether you have transported the right one or not..You might have saved on any other request.
    If still facing same isue then let me know what exactly the message you are getting.
    Thanks & Regards,
    Preetesh

  • App-V 5.0 Reporting Application and Package Information Not Available

    I have SQL Reporting Services set up and Excel and am able to interrogate AppVReporting DB using both. The problem is the Application and Packaging DBs do not appear to be populating.
    The Client information definitely is and I can see it is updating correctly as it is showing the PCs that have been upgraded to HF4. The other two are empty. The reports run fine just with no content in them.
    There is nothing obvious in the Client-Reporting debug log on the client. If I manually do the Send- PS command I get a confirmation it has uploaded successfully. What I can't get is why one part of it appears to be updating correctly but not another but
    there is no separation anywhere that would explain it.
    I am guessing that it may be something to with a permission issue but hopefully someone can point me in the right direction. The only other thing I think a little bit strange when looking through the client settings is Reporting is enabled when I check
    in Powershell but if I go through regedit and look at the App-V 5.0 client reporting settings Reporting Enabled =0. May be a red herring but just thought I would include if it rings any bells for anyone.

    Hello,
    There is a stored procedure that processes the sent information. According to Microsoft it is scheduled to run at 00:00 everyday
    http://technet.microsoft.com/en-us/library/jj692560.aspx
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • Podcast Information not available on IPhone 3G

    Hi,
    When listening to podcasts on my IPOD I can access the creators info on the screen (i.e tracklists and other users created information) by pressing the center button 3 times. When listening to these same podcasts on my IPhone I cannot find a way to access this same info?
    Any suggestions?

    Yes I'm with you behiliker, I have found this incredibly frustrating as well. My little iPod Nano can show me the full title and the detailed information on a podcast, yet my iphone with it's yummy big screen can't!
    It's a real shame as with podcasts in particular you often need to see the full episode title to understand what it is you're listening to.
    Surely they could have an info button on the screen somewhere, and not even worry about the podcasters having to code the info differently.
    I'd like Steve Jobs to address this issue personally!
    Message was edited by: The Roozda

  • Syslog information not available

    HI All
    I have Cisco Prime LMS 4.2.0 version. I had configure for syslog in Cisco Prime LMS but its strage because no data available to showing up

    Usually syslog.log is a flat text file, and it has the basic Raw syslogs, as they appear in show log in your device, so it should be pretty easy and comprehensive.
    To check further, you may try to search for device IP Address.
    Example, i have from my LMS server # IP = 10.10.10.1:
    Under Syslog.log
    Mar 13 06:23:40 10.10.10.1 2961606: .Mar 13 00:39:37: %SYS-1-CPURISINGTHRESHOLD: Threshold: Total CPU Utilization(Total/Intr): 13%/3%, Top 3 processes(Pid/Util):  310/4%, 9/2%, 67/0%
    Mar 13 06:25:45 10.10.10.1 2961607: .Mar 13 00:41:42: %SYS-1-CPUFALLINGTHRESHOLD: Threshold: Total CPU Utilization(Total/Intr) 7%/1%.
    So if you don't see such messages, chances are the syslog aren't coming to the syslog.log.
    Infact, mostly it is so dynamic, that when you test generate a syslog on your device, and the device is configured to forward it to LMS server, you might see the trap, instantly within seconds.
    As per your syslog collector screenshot :
    Marked in RED is forwarded, which shows number of syslog messages, which are forwarded from syslog.log file to LMS Database. It being 0 means no syslog in any reports or database.
    Please check once, if your devices are sending syslogs properly and they are in syslog.log. Unless they reach there, LMS cant do anything.
    -Thanks
    Vinod
    **Appriciate Contributors. RATE them.**

Maybe you are looking for