RE: A difficult problem using arrayfields.

>
The arrayfield widget has an attribute called bodygrid which is a
compoundfield object containing the actual widgets, like the
togglefield,
in the visible rows of the array field.
If you iterate through the children of the bodygrid and determine
which child is in the right row and column for the cell you want,
you can then change its state or other widget attributes.
This technique is commonly used to highlight the selected row or cell
in an array field.
I'm aware of this technique. Our application uses highlightbars and this
is exactly how we implemented them. However, when you code the following
call:
<arrayfield>.bodygrid.children[5].fillcolor = C_RED;
you'll see the widget change color, but when you code
<arrayfield>.bodygrid.children[5].state = FS_DISABLE;
nothing happens. Somehow, forte won't allow you to change the state of a
widget in this context. Is there a way around this?
Pascal Rottier
Origin Rotterdam
Nederland

>
I ran in to the same problem a long time ago (Version 1-H)..
My solution then was to trap for click events or other row-change events
in the array field and set the state of the entire column (using the
strange syntax they have for columns in array fields) to whatever state
I wanted for the particular cell the user just went in to..
To the user, it acted as if some cells were modifiable and some were
not. Note that DISABLED doesn't allow click events at all, making it
impossible to click on a different row which you could edit. I think I
used "VIEW" state..
Hope this helps.The user can click the togglefield without first entering the row. It's
even possible that the arrayfield doesn't have the focus, when the user
clicks the togglefield. In other words, with this technique you can
disable the field AFTER it has been altered. Not before. The way I
solved it now, is to trap the clickevent, check if it is legal for this
row and if not, turn the field back to false. Now the user has a field
that doesn't look disabled (since it isn't), but behaves like it. The
only drawback is, that often you'll see the x apear for a microsecond
before it disappears again.
Pascal Rottier
Origin Netherlands/Rotterdam

Similar Messages

A difficult problem using arrayfields.

I wanted to build some functionality into a window that I've been unable
to do. The window has een arrayfield that shows an array of objects. The
array has a few collums, one of which is a togglefield that shows the
value of a booleandata attribute on the object. However, for some
objects, depending on the value of another attribute, this booleandata
attribute is not allowed to be set to true. We wanted to have these
toggelfields disabled.
So, we have an array, with, on each row a few textdatas, integerdatas
and a togglefield, which is sometimes UPDATE and sometimes DISABLE.
Well, I wasn't able to pull this off.
It doesn't seem to be possible to set the widgetstate for widgets in an
array seperately for each row.
Does anyone have any suggestions.
Thanks,
Pascal Rottier
Origin Netherlands
Rotterdam

>
I ran in to the same problem a long time ago (Version 1-H)..
My solution then was to trap for click events or other row-change events
in the array field and set the state of the entire column (using the
strange syntax they have for columns in array fields) to whatever state
I wanted for the particular cell the user just went in to..
To the user, it acted as if some cells were modifiable and some were
not. Note that DISABLED doesn't allow click events at all, making it
impossible to click on a different row which you could edit. I think I
used "VIEW" state..
Hope this helps.The user can click the togglefield without first entering the row. It's
even possible that the arrayfield doesn't have the focus, when the user
clicks the togglefield. In other words, with this technique you can
disable the field AFTER it has been altered. Not before. The way I
solved it now, is to trap the clickevent, check if it is legal for this
row and if not, turn the field back to false. Now the user has a field
that doesn't look disabled (since it isn't), but behaves like it. The
only drawback is, that often you'll see the x apear for a microsecond
before it disappears again.
Pascal Rottier
Origin Netherlands/Rotterdam

The on/off button on my iPhone 5S is difficult to use. Sometimes I have to use a golf tee to get it to shut off. Is this a common problem and can it be fixed?

The on/off button on my iPhone 5S is difficult to use. Sometimes I have to use a golf tee to get it to shut off. Is this a common problem and can it be fixed?

I'm not sure what difference it makes if its a common problem or not but as its a hardware problem it needs to fixed so take it into an Apple store or authorized iPhone service provider and ask them what can be done.

Why does the new version of Firefox not integrate with Norton 360 Identity Safe. Problem for me because I use Norton 360 Identity Safe to manage my passwords and make it more difficult to use password protected website without that add-in.

I use Norton 360 Identity Safe to manage my passwords and it makes it difficult to use password protected website without that add-in.

Norton release Firefox 8 compatibility already, instruction are here
* http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640

Problems using version set in Elements 9

Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
A

I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

Problem using CORBA clients with RMI/EJB servers..!!!???

Hi,
I have a question on using EJB / or RMI servers with CORBA clients using
RMI-IIOP transport, which in theory should work, but in practice has few
glitches.
Basically, I have implemented a very simple server, StockTreader, which
looks up for a symbol and returns a 'Stock' object. In the first example, I
simplified the 'Stock' object to be a mere java.lang.String, so that lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case 1) and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA and RMI-to-RMI.
But the problem arises when I tried using the RMI server (via IIOP) with the
CORBA client, when the client tries to narrow the object ref obtained from
the naming service into the CORBA idl defined type (StockTrader) it ends up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a PortableRemoteObject derived
class, to make it IIOP compliant), and then the server to register the stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming =NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ": " +obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to register the RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref name (with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the naming
service, the operation StockTraderHelper.narrow() fails in the segment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registered in a CORBA
server (as opposed to an RMI server), but works correctly with no casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari

On the contrary... all that is being said is that we needed to provide clearer examples/documentation in the 5.1.0 release. There will be no difference between the product as found in the service pack and the product found in the 5.1.1. That is, the only substantive will be that 5.1.1 will also
include the examples.
"<=one way=>" wrote:
With reference to your and other messages, it appears that one should not
expect that WLS RMI-IIOP will work in a complex real-life system, at least
not now. In other words, support for real-life CORBA clients is not an
option in the current release of WLS.
TIA
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
We currently publish an IDL example, even though the IDL programmingmodel in Java is completely non-functional, in anticipation of the support
needs for uses who need to use IDL to talk to the Weblogic server,
generically. This example illustrates the simplest connectivity; it does not
address how
to integrate CORBA and EJB, a broad topic, fraught with peril, imo. I'llnote in passing that, to my knowledge, none of the other vendors attempt
this topic either, a point which is telling if all the less happy to hear.
For the record then, what is missing from our distribution wrt RMI-IIOPare a RMI-IIOP example, an EJB-IIOP example, an EJB-C++. In this you are
correct; better examples are forth coming.
Still, I would not call our RMI-IIOP implementation fragile. I would saythat customers have an understandably hard time accepting that the IDL
programming model is busted; busted in the sense that there are no C++
libraries to support the EJB model, and busted in the sense that there is
simply no
support in Java for an IDL interface to an EJB. Weblogic has nothing to doit being busted, although we are trying to help our customers deal with it
in productive ways.
For the moment, what there is is a RMI (over IIOP) programming model, aninherently Java to Java programming model, and true to that, we accept and
dispatch IIOP request into RMI server objects. The way I look at it is this:
it's just a protocol, like HTTP, or JRMP; it's not IDL and it has
practically nothing to do with CORBA.
ST wrote:
Eduardo,
Can you give us more details about the comment below:
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult ot
use an idl client in java to work.It seems to me that Weblogic's RMI-IIOP is a very fragile
implementation. We
don't need a "HelloWorld" example, we need a concrete serious example(fully
tested and seriously documented) that works so that we can get a betteridea
on how to integrate CORBA and EJB.
Thanks,
Said
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
Please post request to the news group...
As I said, you must separate the idl related classes (class files and
java
files) from the rmi classes... in the rmic step, you must set a newtarget
(as you did), emit the java files into that directory (it's not clearyou
did this), then remove all the rmi class files from the class path... ifyou
need to compile more classes at that point, copy the java files to theidl
directly is you must, but you can not share the types in any way.
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult otuse
an idl client in java to work.
Harindra Rajapakshe wrote:
Hi Eduardo,
Thanks for the help. That is the way I compiled my CORBA client, by
separating the IDL-generated stubs from the RMI ones, but still I
get a
CORBA.BAD_PARAM upon narrowing the client proxy to the interfacetype.
Here's what I did;
+ Define the RMI interfaces, in this case a StockTrader interface.
+ Implement RMI interface by extendingjavax.rmi.PortableRemoteObject
making
it IIOP compliant
+ Implemnnt an RMI server, and compile using JDK1.2.2
+ use the RMI implementation to generate CORBA idl, using RMI-IIOPplugin
utility rmic;
rmic -idl -noValueMethods -always -d idl stock.StockTraderImpl
+ generate Java mappings to the IDL generated above, using RMI-IIOPplugin
util,
idlj -v -fclient -emitAll -tf src stocks\StockTrader.idl
This creates source for the package stock and also
org.omg.CORBA.*
package, presumably IIOP type marshalling
+ compile all classes generated above using JDK1.2.2
+ Implement client (CORBA) using the classes generated above, NOTthe
RMI
proxies.
+ start RMI server, with stockTrader server obj
+ start tnameserv
+ start CORBA client
Then the client errors when trying to narrow the obj ref from the
naming
service, into the CORBA IDL defined interface using,
org.omg.CORBA.Object obj =naming.resolve(nn);
StockTrader trader =StockTraderHelper.narrow(obj); // THIS
ERRORS..!!!
throwing a CORBA.BAD_PARAM exception.
any ideas..?
Thanks in advance,
-hari
----- Original Message -----
From: Eduardo Ceballos <[email protected]>
Newsgroups: weblogic.developer.interest.rmi-iiop
To: Hari Rajapakshe <[email protected]>
Sent: Wednesday, July 26, 2000 4:38 AM
Subject: Re: problem using CORBA clients with RMI/EJBservers..!!!???
Please see the post on june 26, re Errors compiling... somewherein
there,
I suspect, you are referring to the rmi class file when you are
obliged
to
completely segregate these from the idl class files.
Hari Rajapakshe wrote:
Hi,
I have a question on using EJB / or RMI servers with CORBA
clients
using
RMI-IIOP transport, which in theory should work, but in practice
has
few
glitches.
Basically, I have implemented a very simple server,
StockTreader,
which
looks up for a symbol and returns a 'Stock' object. In the firstexample, I
simplified the 'Stock' object to be a mere java.lang.String, so
that
lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case
1)
and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA andRMI-to-RMI.
But the problem arises when I tried using the RMI server (via
IIOP)
with
the
CORBA client, when the client tries to narrow the object ref
obtained
from
the naming service into the CORBA idl defined type (StockTrader)
it
ends
up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending
java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a
PortableRemoteObject
derived
class, to make it IIOP compliant), and then the server to
register
the
stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation
class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming=NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ":"
+obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to
register
the
RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref
name
(with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the
naming
service, the operation StockTraderHelper.narrow() fails in thesegment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the
type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registeredin a
CORBA
server (as opposed to an RMI server), but works correctly with
no
casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari

Why are shapes so difficult to use now?

I cant see a single way shapes in CC are better. All extra stages and annoyances, anyone have better workflow method to combat these new things?
1. Cant duplicate easily.
Before: select layer, cmd + j = duplicated
Now: select layer, cmd + j = blank layer, nothing.
Solution, select the pen, select the shape, select the layer, NOW duplicate.
Am I doing it wrong? Because before you could just duplicate, now you have to have the shape selected and the layer. This is very frustrating adding extra clicking/selection to my workflow.
If you right click a shape and duplicate, it works. So the shortcut of duplicate doesnt work the same?
2. Pen Points are infuritating.
Before: drag a box out to select multiple points on a shape.
Now: drag a box out, selects every point in the entire document on every layer. How is this better than before?
Solution, none really? If there is one I take it, its an extra click.
3. A shape remembers the last point you click. Great so now everytime I click a shape I have to deselect that point, and usually try to do that using a drag box, which doesnt work.
I just dont see how any extra workflow helps bring anything good to photoshop. What are the benefits to this new system?

I have bought a Ipad 4 a week ago and find it is like wading though treacle to get my data loaded! Itunes seems very unintuitive and difficult to use. I managed to transfer my music and films over from my PC and started using them on the Ipad when suddenley they dissappeared! "No Content" so I had to go back and reload them all again. I still have not found a way to transfer and use my documents onto the Ipad. I have an Android tablet and that is so simple to use(and a liot less expensive to buy). Why can't I access the file system on the Ipad, this seems to be the heart of my problems. I am not inexeperienced with computers as I am a retired Computer Manager/Analyst/[programmer over 20 years.

A difficult problem

hi,
I have worked on a project for a long time. It's front screens are all written in JSP. They all have a similar format of every page having a menu on left side and remainin on the other side. there is small gap after the menu. Now the business guys want a bar to seperate the menu from the content. They want it in about 40 pages.What am i supposed to do. Is there any way i can change which changes all the JSP pages

hi,
I have worked on a project for a long time. It's
It's front screens are all written in JSP. They all
have a similar format of every page having a menu on
left side and remainin on the other side. there is
small gap after the menu. Now the business guys want
a bar to seperate the menu from the content. They
want it in about 40 pages.What am i supposed to do.
Is there any way i can change which changes all the
JSP pagesIs it really a difficult problem? That's simple HTML. Anyway, if you had similar content in all pages, you could have used frames or <jsp:include> or something of that sort...
Annie

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Huge problem using apple mail while sending email to a group...

Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
Christof

How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+ at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+ at java.lang.Class.newInstance0(Class.java:355)+
+ at java.lang.Class.newInstance(Class.java:308)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

The new format on FF4 is confusing and difficult to use. Is there a setting where I can change it to show the FF3.6 format?

Myself and several of my friends were discussing the new Firefox layout for Firefox 4.0, and we find it difficult to use. We would like to have the option of using the new Firefox with the old 3.8 layout. That would make it much easier to use. One of my friends is vision impaired and having become accustomed to the old layout, is finding it almost impossible to transition.
I have uninstalled FF4.0 and re-installed FF3.8 so that I can have the familiar layout. Others are doing the same.

If you do not like the new appearance of Firefox 4 then you can change some setting to restore the Firefox 3 appearance.
You can right click the orange Firefox button to open the toolbar menu.
* Click the Menu Bar entry to make the Menu Bar visible.
* Click "Tabs on Top" to remove the check mark and place the Tab Bar at its original position just above the browser window.
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar.
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.
If you type in the location bar then that button becomes a Go button.
You can middle-click that Reload button to duplicate the current tab to a new tab.
In Firefox 4 you no longer have the Status bar that showed the padlock in previous Firefox versions. 
The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server. 
So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL. 
The functionality of the padlock has been replaced by the [[Site Identity Button]] on the left end of the location bar. 
See also: 
* http://www.dria.org/wordpress/archives/2008/05/06/635/
* http://www.mozilla.com/firefox/features.html

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

RE: A difficult problem using arrayfields.

Similar Messages

Maybe you are looking for