Re: another forum thread

Similar Messages

• How do I move my thread to another forum

  somebody has suggested I move my thread to another forum - how do I do that?
  the thread I want to move is
  [Reports based on Linked Universes in BOXI 3.0 do not work|Reports based on Linked Universes in BOXI 3.0 do not work]

  thanks, could you please move it to the BusinessObjects Enterprise Administration forum BI Platform

• Change the Post Moved to another Forum procedure

  When a post gets moved to another forum, and you click on the green-arrow Moved: it shows you a new screen with the new link, and info where it is moved to.
  See here and here
  Could that be changed in such a way, that when you click on the Moved: it takes you direct to that post in the new forum, without the in-between message?
  Message Edited by RealBlackStuff on 12-22-2007 10:01 AM

  I wonder if it would do what you're asking if we didn't put anything in the comment box?  I'll try that.
  I had been leaving a placeholder and filling in that comment in for now just to reinforce the idea that people should watch where they're posting in the first place.  I wasn't planning to keep doing that once things are firmly established here, and we don't leave a trail of breadcrumbs at TPF any more when we move something.  It's just clutter.
  OK, I tried not putting a comment in, and it didn't change anything.  I did find out that I can delete the placeholder, though, without deleting the moved thread.  In phpBB, deleting the placeholder dumps the whole thread.  I think that's an improvement from Lithium over phpBB.
  Message Edited by nonny on 12-22-2007 11:01 AM
  English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
  Jane
  2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
  I am not a Lenovo Employee.
  I AM one of those crazy ThinkPad zealots!
  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

• I  do not get the watching forum thread/category in emails for 2 days

  Hi Sir/Madam,
  I do not get the watching forum thread/category in emails for 2 days .
  I dont know the reason. i get other emails.
  I dont want to change my email address.
  Looking forward to your positive reply.
  Thanks and regards,
  Rajeshkumar

  still not working , i regret with the oracle service. now i am using another new email id to watch forum threads.

• Cannot post on another forum!

  I am having trouble submitting a post on another forum when using my BlackBerry. (http://www.rabble.ca/babble if that is helpful in any way) I don't know what is wrong, as I'm fine posting here and on another forum where I'm a member. Is there something I should change in my browser settings? I'm using Opera Mini, if that helps. I was able to start a new topic (after clicking on "submit" several times) but I can't reply to a topic already started.
  HELP...?
  "We're all in the gutter, but some of us are looking at the stars."
  ~ Oscar Wilde

  I don't know, that is strange, could be different forums software, you could inquire if they have a WAP or mobile version of the site?
  BTW, there is a new Opera Mini 4.2 beta version out.
  http://www.blackberrynews.com/2008/11/11/opera-mini-42-upgrade-available-for-blackberry/
  1. If any post helps you please click the below the post(s) that helped you.
  2. Please resolve your thread by marking the post "Solution?" which solved it for you!
  3. Install free BlackBerry Protect today for backups of contacts and data.
  4. Guide to Unlocking your BlackBerry & Unlock Codes
  Join our BBM Channels (Beta)
  BlackBerry Support Forums Channel
  PIN: C0001B7B4   Display/Scan Bar Code
  Knowledge Base Updates
  PIN: C0005A9AA   Display/Scan Bar Code

• Trying to install SL on a new hard-drive for my iMac, when asked which disk to install on it gave me no options, i followed advice from another forum and created a partition, now can't boot from the new drive at all. Help?

  I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
  So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
  ( https://discussions.apple.com/message/10576009#10576009 )
  After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
  Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
  <div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>

  Hi db2
  That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
  1. Boot from your original install or retail SL DVD and open Disk Utility.
  2. Highlight the new HD in the list of drives and select the Partition tab.
  3. Under Volume Scheme select 1 Partition and click on the Options... button.
  4. Select GUID Partition Table in the drop down window and click OK.
  5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
  6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or  Bootable Clone.
  Dennis

• Someone answered question by stating Found solution on another forum: hold the remote's wireless key down continuously...  is that on the bose soundock remote?

  my bose sounddock no longer plays as it did using my airport express - with iphone 5 or ipad mini, nada. someone mentioned holding down the wireless remote continuously? which remote has wirelesskey?
  Found solution on another forum: hold the remote's wireless key down CONTINUOUSLY whilst pairing any other devices. This isn't in the user manuals. Bose ought to rectify this in any firmare upgrade...
  Like (6)

  Tell Bose. This is the Apple Support Community.

• Spammer in a forum thread.

  https://discussions.apple.com/people/feinmeister is spamming a forum thread. How do we report these spammers?
  Thank you in advance.

  I am not a spammer.  I hit reply to messages and happened to reply the same thing to different people.   As a new forum user, I was under the impression that replying to an individual's post would go to the individual.  Sorry if I offended or annoyed anybody. As for the bad link to Apple Feedback, it inadvertedly occured when I reposted my Facebook post where the link looked clean and I didn't know it would bring you to FB and not the clearly labeled Apple.com/feedback/iPhone link that I posted here.  My intent is to get as many folks as possible to use the feedback method that Apple prefers so that the manual sync problem can be resolved.
  According to Apple Communities Support Staff, my message was taken down AND my question to the community was removed NOT because I've repeatedly replied to individual posters but because: "Recently you posted a poll or petition in Apple Support Communities. We are including a copy of your message at the end of this email for your reference. We understand the desire to share experiences in your topic, "Re: How to sync an iPhone with an iMac, on Maverick? ," but because these posts are not allowed on our forums, we have removed it."
  Since when is reiterating what Apple's Executive Customer Service told me (engineers will only fix the manually sync option that has been removed with upgrade to Mavericks when there are enough complaints / feedback to catch their attention) considered a poll or a petition?? Just because I asked that my message be shared? Seems to me that perhaps the handlers don't want an influx of feedback on this topic.
  This forum is lovely but  this is a circular conversation and nothing will change until Apple get the message loud and clear through the iPhone feedback website.  Exec Service said to select the feedback category Design and Ease of Use so that an abundance of the same complaint could be readily tallied. This needs to go viral.

• I'm unable to navigate to some pages (last pages) in a multi page forum thread..

  I am not always able to navigate to all pages (last or past a certain page) of a multipage forum thread.. It can be the second page or, at times, the 18th page.... VBulletin site... IE works and the previous version worked..

  Hi,
  Please also try a '''Ctrl '''+ '''F5 '''refresh. This helps to bring in the page contents afresh. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
  [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
  [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
  [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
  [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
  Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
  [https://support.mozilla.org/en-US/kb/Options%20window Options]

• Attaching files to forum thread

  Please forgive me for asking a general question, but does anyone know if you can attach files to forum threads? If you can, how does one do that?
  Thanks

  Hi,
  Check the following thread :
  Re: Can I attach files/screen prints with my posts?
  It's really easy to post your screenshot somewhere else on the web and link to it, if plain text is not enough.
  Regards,
  Jitin
  SAP Business One Forum Team

• Another process (thread) is applying transactions for this client:

  Has anyone seen this error
  'Another process (thread) is applying transactions for this client: MNEWMAN Try again later.'
  We seem to be getting a few upload transactions put into the error queue for this reason, sometimes just executing the transaction clears it, but more often the data actually looks to have been correctly posted to the server as well as appearing in the error queue, as itf two threads have picked up the same transaction, one has applied it without error and the other failed
  any ideas?

  latest update from Oracle is to
  1.Set MAX_APPLY_TRIES=5
  2.Set APPLY_TRIES_DELAY=10
  Done this, but waiting for sufficient activity to see if it solves the problem.
  I had thought about knocking max_threads down to 1 (and might do this to try and isolate some odd performance issues), but the problem is that this would make the apply and compose process take three times as long (we use 3 threads), and that will not be acceptable for long on the live system

• Why can't i access forum threads-- everythread must be opened all of a sudden from showthread.php (?whats that)

  my operating system is ubuntu
  this just started. well for a couple hours i was getting repeated message for a couple of hours in terms i didn't understand, pure computer talk, from who? i don't know. i did download some email photos but did not save them. can't tell you what it said. but everything was normal at the forum. they just did a minor upgrade there in the last few hours tho also.
  i put the machine to sleep for an hour or so. got back on line and can't access the forum threads. i get a window that says:
  '''opening showthread.php'''
  you have chosen to open
  showthread.php
  which is a PHP file
  from: http://(my forum)
  what should firefox do with this file?
  * open with [browse button]
  *save file
  do this automatically etc
  ????????????

  I don't know much about samba, but I have had very similar problems with netbios in windows, I find it to be very unreliable and I think you would be better off with ftp, but that's just my opinion. Apart from that, are you sure you have the necessary ports opened, and so do they? And you might need a line in /etc/hosts.allow
  Last edited by calef13 (2008-04-21 10:28:45)

• Workflow to print forum threads

  Hi everyone,
  Is there a workflow i could set up to print forum threads (either hard copies or PDF)?
  I'd like to navigate to a page (say http://discussions.apple.com/forum.jspa?forumID=936&start=0 ), have Automator navigate to the threads on the current page, and print the threads to a PDF doc.
  I know that sounds a bit ambitious... but is it possible?
  15" MacBook Pro 2.16 Core Duo, 1GB RAM, 256 VRAM   Mac OS X (10.4.8)  

  Nathan,
  Yes this is possible.
  Here is the start of the workflow:
  1) Get Specified URLs - if you go to the website of interest in Safari then you can easily add this by hitting the Current Safari page button
  2) Get Link URLs from Webpages
  3) View Results - This is not necessary but nice as it will show you that you have picked up all of the URLs to the individual forum threads
  4) Display Webpages
  Then you have to decide whether you want to print as a webpage or create a pdf.
  The webpages could be printed using a Run AppleScript action which tells Safari to print each page.
  A pdf could be generated by manipulating the print dialog in Safari through the "Save as PDF" command of the PDF button at bottom of dialog or installing a Virtual printer like CUPS-PDF.

• Redirect me back to the forum thread I was viewing after I login!!!!!!!

  Redirect me back to the forum thread I was viewing after I login!!!!!!!
  How simple is that?

  ali brown wrote:
  Hello Looter,
  Why not Sign-In before you view the Forums?
  How simple is that?
  ali b
  Because I am following a link from a topic to which I am subscribed. If 8-10 other forums I participate in can, many of which at not technology related whatsoever, then I 'm sure Apple can figure it out.
  Follow the logic here...
  1. On my Mac I receive an email notifying me of a response to a topic to which I am subscribed in Apple Discussions.
  2. I click the link in the email in MAIL.app, this discussion for example 'To view or respond to this message, visit <http://discussions.apple.com/thread.jspa?messageID=7019288#7019288> '
  3. This launches SAFARI and opens the thread in APPLE's discussion forum website.
  4. I want to reply to the discussion.
  5. I click 'Login'.
  6. I am taken to the login page.
  7. I login.
  8. I am redirected to the main Apple Discussion page, http://discussions.apple.com/index.jspa NOT the page I was viewing prior to logging in.
  To get back to that page AND be logged in I can either...
  Switch back to mail.app and re-click the discussion topic link
  OR
  Hit the BACK button twice in Safari then hit RELOAD to refresh and get the Apple Discussions site to realize I am now logged in.
  There are two simple solutions that would also result in less work for Apple's servers, not requiring them to needlessly reload multiple pages.
  1. Redirect me back to the forum thread I was viewing after I login.
  2. Provide a login WITHIN the page am viewing.
  As I said I probably subscribe to 8-10 forums, none of which have built the hardware (Mac Pro) or software (Mac OS 10.5.2, Mail.app and Safari) yet they ALL are able to do both or the above.
  Somehow Apple is not able to do either even though they built the hardware AND the software.
  Message was edited by: Looter for clarification

• Post editing and search forum thread?

  If a post is edited, shouldn't the forum thread be bumped to the top?
  Is it possible to search inside a forum thread? If not, a feature like that would make it easier to find what you're looking for.

  jonkristian wrote:If a post is edited, shouldn't the forum thread be bumped to the top?
  Well I think that function is more for correcting typo's, so bumping the thread to the top would be kind of undesirable. Anything other than correcting a typo, then you could probably just post again in the thread.