RE: AutoAct Config sheet. Unable to read greyfont on white in small font. Hit print button , no response. Print from 'File, st page unreadable, as above, second page ,black backgrund w.grey copy, unreadable. 3rd manhours shot, no answers.
Basic entry of email addresses w/ passwords failed. Password errors?. Went to Auto Acct Cong. IE isn't great, but it works. Ron R. 0417/0901
Similar Messages
-
Config Replace unable to read files from flash
I am having an issue with the CONFIG REPLACE command. This is on several different devices; c2901 routers, c3560 and c2960 switches.
Every attempt I make at doing a config replace results in an error stating that the file can not be read. However, the SAME file can be read using the copy <file> run command.
I even manually copied the txt configuration file into running config, saved it using another file name (TEST.CFG.REPLACE), then reloaded the device and loaded a maintenance config (using copy x run). Once the device was configured, I tried the config replace command using the config saved directly from run and it STILL won't work.
The following output is from a c3560:
s1#dir
Directory of flash:/
40 -rwx 1704 Mar 1 1993 00:09:06 +00:00 config.text
43 drwx 192 Mar 1 1993 00:34:00 +00:00 c3560-ipservicesk9-mz.122-58.SE2
41 -rwx 1503 Mar 1 1993 00:06:32 +00:00 s1m.cfg
42 -rwx 412 Mar 1 1993 00:02:23 +00:00 maintain.tcl
486 -rwx 281 Mar 1 1993 00:01:28 +00:00 reset.tcl
488 -rwx 1919 Mar 1 1993 00:09:06 +00:00 private-config.text
489 -rwx 3096 Mar 1 1993 00:09:06 +00:00 multiple-fs
490 -rwx 9819 Mar 1 1993 00:03:17 +00:00 TEST.CFG.REPLACE
32514048 bytes total (12775424 bytes free)
s1#config replace TEST.CFG.REPLACE
This will apply all necessary additions and deletions
to replace the current running configuration with the
contents of the specified configuration file, which is
assumed to be a complete configuration, not a partial
configuration. Enter Y if you are sure you want to proceed. ? [no]: y
Error: Could not open file TEST.CFG.REPLACE for reading
s1#
Is there a permissions issue that I can't see?Every char has an extra zero. The encoding is not clear to me. The file was originally written in notepad or vi.
I saw that when I left a specific character out , I did not get that problem. However I am looking for another solution then just leaving characters out.
I tried to read the file and rewrite it in another charset (ISO-8859-1), but that did not work either.
thanks. -
When printing on both sides, get unreadable stripe on second page, Imageclass D420 printer
Have a Canon Imageclass D420printer. Lately I am getting a 1/2 inch wide vertical stripe of smears the full length of the page when printing both sides. The blurred stripe is approximately 3" from the right hand edge of the sheet. The smear shows up on the second side 3" from the left hand edge of the sheet. I reprinted the same document and only printed on one side of the paper and the smear does not occur. Sounds like some roller needs to be cleaned? Anyone have similar problem.
Thanks,
Jerry HudackHi jerryhudack,
To help isolate the cause of the issue, please check the following:
1. Confirm that either LTR or A4 paper between 17 to 21 lb (64 to 80 g/sq.m.) is being used when duplex printing (Note: envelopes cannot be used for 2-sided copying).
2. If using specialty paper, please test standard laser copy paper for comparison.
However, if the above has been checked, the fuser roller in the main unit may be dirty affecting the second side of your duplex printouts. Cleaning the Fuser Roller can help with the issue.
The below procedure will step you through the cleaning process. To prepare, load a sheet of blank LTR paper into the multi-purpose tray and start cleaning. Here are the steps:
Note:
- Use standard paper as the cleaning paper.
- Cleaning the roller takes approximately 130 seconds.
- When some jobs are stored in memory, this function is not available.
1. Press [Menu].
2. Press [ < ] or [ > ] to select <ADJUST./CLEANING>, then press [OK].
3. Confirm a sheet of blank LTR paper is loaded in the multi-purpose tray.
4. Press [ < ] or [ > ] to select <FIX. UNIT CLEANING>, then press [OK].
Cleaning starts.
Throw away the cleaning paper after use, and perform a duplex test print to confirm the issue has been resolved.
If unresolved, please contact us here and we'll be glad to help you further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
My reader 11.0.06 has a non working Poster button in the print window.. AGAIN
thought I 'fixed' it a couple of days ago, as when I updated the driver(s) for my Brother Laser It worked. However I tried to use.. it just now... the pesky button is inoperative.. AGAIN!
There is clearly something basic amiss here and Nothing has been done to my machine ..XP pro fully updated since i thought I had fixed it the other day.
Please help.Cleaned out/uninstalled Reader using the Adobe uninstal widget.
Reinstalled Reader 11.0.04 !!
(was tricky to find a previous version... I think they were aggresively eliminated)
NOW ! the posterprint button works.. AGAIN.
No idea if it's a permanent or even long lasting fix.
But ? there seems darn little else to try. -
Unable to read the FBA user user profile properties in Sharepoint 2010
hi,
how to read the FBA user profile properies in code . i have Sharepoint2010 FBA site when i need to read teh FBA user profile
when i am trying read the properties by using
UserProfile CurrentUserProfile = upm.GetUserProfile(i:0#.f|fbamembershipprovider|[email protected])
i am getting soem exception like
unable to read user profiles how to fix this isse
Srinivashi,
thanks for response i have fba data base in my sql server where user user formation will store i am using (http://sharepoint2010fba.codeplex.com/documentation) . i am using user name as email id for user login. at the time of user signup process in
to sharepoint i am storing the user deatils like user name ,password, passwordquestion, answer etc at the same time i am storuing another deatils like firstname last name age sex etc to anothe list which is sharepoint2010 list. user login into sharepoint
site i am getting the user display namelike"#:0|Parvider|[email protected] i need to change this name like "First Name Last Name " how can i do it.. database does not contain any deatils related to First Name Last Name this information extist
in sharepoint list
this is my requirement
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ed543e3c-00e5-4a52-92ee-75f49cd0fbb2/how-to-change-the-user-display-name-in-fba-site-and-place-my-own-display-name-in-sharepoint2010-fba?forum=sharepointdevelopmentprevious#ed543e3c-00e5-4a52-92ee-75f49cd0fbb2
Srinivas -
Ora-01466 unable to read data table definition has changed oracle.
hi all,
i truncated a table before 10 min. now i want the data's so i used this query ;
select *
from ( select *
from sometable where some_condition )
as of timestamp sysdate-1;
but it shows:
""" ora-01466 unable to read data table definition has changed oracle"""";
how to get the deleted records from database????????????
Edited by: 887268 on Oct 24, 2011 4:02 AMError: ORA 1466
Text: unable to read data -- object definition has changed
Cause: This is a time-based read consistency error for a database object,
such as a table or index.
Either of the following may have happened:
The query was parsed and executed with a snapshot older than the time
the object was changed.
The creation time-stamp of the object is greater than the current
system time.
This happens, for example, when the system time is set to a time
earlier than the creation time of the object.
Action: If the cause is
an old snapshot, then commit or rollback the transaction and resume
work.
a creation time-stamp in the future, ensure the system time is set
correctly.
If the object creation time-stamp is still greater than the system
time, then export the object's data, drop the object, recreate the
object so it has a new creation time-stamp, import the object's data,
and resume work. -
XML Encoding from SBO - Unable to Read in a 3rd Party APP
Hi:
I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1. Can anyone please tell me whether it is possible to change the encoding format in my Add-On code?
Thank you.
Kushal DuttaKushal,
The forum that you have posted your question in is for questions related to the SAP Business One Integration for SAP NetWeaver. Your question seems to be related to the SAP Business One SDK and should be posted in the SAP Business One SDK Discussion Forum.
Eddy -
XML Encoding from Business One - Unable to Read in a 3rd Party APP
Hi:
I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1.
I would like to know if there is a way in SDK to convert the output XML format to a single byte encoding such as ISO-8859-1. Can anyone please tell me how to achieve that in my Add-On code?
Thank you.
Kushal DuttaHi Kushal,
You can use a XLST transformation to convert from UTF-16 to UTF-8.
The coding goes something like this:
XmlReader xmlRdr = XmlReader.Create(new StringReader(sXML));
XmlWriterSettings xmlWtrSettings = new XmlWriterSettings();
xmlWtrSettings.Encoding = Encoding.Unicode;
XmlWriter xmlWtr = XmlWriter.Create(sOutFile, xmlWtrSettings);
XslCompiledTransform xslt = new XslCompiledTransform();
xslt.Load(sTransformFile);
xslt.Transform(xmlRdr, xmlWtr);
xmlWtr.Flush();
xmlWtr.Close();
xmlRdr.Close();
Where sXML is the XML string generated by the SBO GetAsXML method, sOutFile is the path and filename where the transformed XML will be created and sTransformFile is the path of the XLST file.
Assuming that you wish to retain the same XML structure as before, the XLST file should look something like the following:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<BOM>
<xsl:for-each select="BOM/BO">
<BO>
<AdmInfo>
<Object>
<xsl:value-of select="AdmInfo/Object"/>
</Object>
</AdmInfo>
<ORDR>
<xsl:for-each select="ORDR/row">
<row>
<DocEntry>
<xsl:value-of select="DocEntry"/>
</DocEntry>
<DocNum>
<xsl:value-of select="DocNum"/>
</DocNum>
<DocDate>
<xsl:value-of select="DocDate"/>
</DocDate>
<DocDueDate>
<xsl:value-of select="DocDueDate"/>
</DocDueDate>
<DocStatus>
<xsl:value-of select="DocStatus"/>
</DocStatus>
<Cancelled>
<xsl:value-of select="CANCELED"/>
</Cancelled>
<CardCode>
<xsl:value-of select="CardCode"/>
</CardCode>
<CardName>
<xsl:value-of select="CardName"/>
</CardName>
<NumAtCard>
<xsl:value-of select="NumAtCard"/>
</NumAtCard>
</row>
</xsl:for-each>
</ORDR>
<RDR1>
<xsl:for-each select="RDR1/row">
<xsl:sort select="LineNum" />
<row>
<LineNum>
<xsl:value-of select="LineNum"/>
</LineNum>
<ItemCode>
<xsl:value-of select="ItemCode"/>
</ItemCode>
<Dscription>
<xsl:value-of select="Dscription"/>
</Dscription>
<Quantity>
<xsl:value-of select="Quantity"/>
</Quantity>
<WhsCode>
<xsl:value-of select="WhsCode"/>
</WhsCode>
<BaseType>
<xsl:value-of select="BaseType"/>
</BaseType>
<BaseEntry>
<xsl:value-of select="BaseEntry"/>
</BaseEntry>
<BaseLine>
<xsl:value-of select="BaseLine"/>
</BaseLine>
<FreeTxt>
<xsl:value-of select="FreeTxt"/>
</FreeTxt>
</row>
</xsl:for-each>
</RDR1>
</BO>
</xsl:for-each>
</BOM>
</xsl:template>
</xsl:stylesheet>
The above example shows a XLST transform for the sales order document type. This example is for use with the xet_ValidNodesOnly setting for the XmlExportType company property. If you are using a different XmlExportType setting then the XLST will be slightly different but the principal is the same. For simplicity, I have shown only a cut-down list of the fields from the sales order but other fields and tables can be included (assuming that they are in the original XML from SBO).
Kind Regards,
Owen
P.S. Sorry for the lack of indentation on the XML file. It was there when I created this post but the forum removes the indentation. -
Usb 1-7: unable to read config index 0 descriptor/start -71
On my laptop (Asus N550LF) this message appears repeatedly during boot. Once X is running it seems to stop, although it could just be that I cant see the output!
There are few posts for usb 1-7: unable to read config index 0 descriptor/start -71 but they all seem to suggest it's a USB device. This happens whether or not I have anything plugged into USB.
Is there anything I can do to debug this further?May or may not be helpful:
https://bbs.archlinux.org/viewtopic.php … 5#p1050195 and https://bbs.archlinux.org/viewtopic.php?id=134726
https://bbs.archlinux.org/viewtopic.php … 3#p1121923 [note that this concerns an installed system and is from before Arch's switch to systemd]
Do you have settings in BIOS affecting support for USB? E.g. sometimes there are options to enable/disable support for different ways of accessing stuff or different versions of stuff. -
Hello,
I have a PIX 515e.
When I load the ASDM Software on my pc I receive the error " ASDM us unable to read the configuration from the PIX. Please check the configuration and your connection and then try again by licking the refresh button."
I can get into the pix via putty and no config changes have been made in months. Whenever I click refresh I get the same error.
Any ideas?
Thanks in AdvanceWe had the same problem after updating the Sun Java client to v6 update 11. Just downgrade and you should be ok again.
The same issue is with adsm on ASA. -
Nokia E71 post update error: unable to read messag...
hi! i am unable to read few of my messages say' every 2 out of 10...after a success full update to version410.21.010 and RM-346. actually i did a simple data restore (containing messages , settings and contacts) after the update.. i did it twice after that to check but all in vain..infact OVI suite too does not display the message in my inbox here is a screenshot of the unreadable message with a questionmark sign in front..though message details are available but cant open the message!!! in sequence : 2nd,3rd,4th,7th and 9th
SIDno no no....the matter is not the old messsages...but the new messages that are to come. The probability is that some of them too not become unreadble!!! though i dont have synced them instead have made a backup of them...restoring which seems to be the bone of contention! i want to know is that an update error or should i not restore my backup to avoid the problem after the format???
SID -
RMAN unable to read backupset file during Cloning
Hi,
I'm performing cloning operation on windows to windows. On target I have taken backup through rman using recovery catalog. I've taken fresh backup of database along with archivelogs and delete the obsoleted one using rman recovery catalog repository.
When I connect to Target,Recovery catalog and auxiliary instance after executing some commands RMAN gives error that it is unable to read backupset file. What could be the reason for this. I'm posting the Error Portion of RMAN listing please see it and tell me what could be the reasons as I have taken fresh backups and it seems that it is unable to read that particular backup.
channel ORA_AUX_DISK_1: reading from backup piece C:\ORACLEBASE\PRODUCT\10.2.0\F
LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
6YLD_.BKP
ORA-19870: error reading backup piece C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP
ORA-19505: failed to identify file "C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_
AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2010 13:17:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
Please help me in this matter.
Regards,
AbbasiIf your RMAN backup exist on target server path.
Target Server: C:\Oracle\RMAN_BACKUP\
Put it on the same location in the auxiliary server.
Auxiliary Server: C:\Oracle\RMAN_BACKUP\
During cloning also connect with your recovery catalog as you are using recover catalog for the target server.
Regards
Asif Kabir
Edited by: asifkabirdba on Sep 27, 2010 2:51 PM -
I have a mac osx 10.411 power pc and recently i downloaded excel for mac 2004 so that i could download some program that only would work if i have excel for mac but what happen was it went to script and said that unable to read the dictionary of the application of the extension because it is not scriptable and the second pop up said the document autorun,inf could not open script editor can not open files in script editor app can any one help me how do i get these program working thank you norro460
good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along
-
Unable to read payload from the message object in XI
Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDzHi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav -
Unable to read software component version from System Landscape Directory "
I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
2. Select the scenario PI and the task PIPostInstallProcess.
3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
4. Choose Install.
Maybe you are looking for
-
Can not get shows "Purchased on Apple TV" in iTunes to show up on Apple TV
Hi - Ugg! To try and make this all work I deleted and re-added Apple TV to iTunes. I now can not get any of the shows that have been transferred to my laptop (which I did not want in the first place) to show up on the Apple TV. All the shows that I b
-
Video out stopped working with 10.4.6 update
Hi, i've just installed the 10.4.6 update and now i have no video out. i have a video connected to the adc to s vhs connector. now when i start up my monitor starts up as the second display, and i have to put my computer to sleep and then wake it up
-
How to upload and share document from pages
how to upload and share document from pages app?
-
Error 83::8 (not enough memory to initialize PSL) when use layer styles in AEF
Hello! Have error in AEF CS6 when i try to use layer styles in AEF. Error is "not enough memory to initialize PSL 83::8" It works good if i start programm as Administrator. My PC is: Windows 7, Intel core 7 with 2.7 Ghz, 6 Gb RAM, Nvidia GeForce 240
-
Help please - my sent mail has completely disappeared apart from the last 3 days of sent mail. I have not deleted or changed any settings. Thats 5 years of sent mail completely gone. Is there any way of getting it back?? What could have happened?