Re: B2B Customer Protocol Inbound Operation

Hi All,
It was a very good discussion. I am also facing the same problem.
B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: Start of root element expected.
So, I do need to change the ecs file in order to get problem resolved. Is it correct?
Thanks
Abhas Kushwaha

Hello,
Just a thought, When I had the similar problem, it appeared to be a BOM (Byte order mark - Wikipedia, the free encyclopedia) in the xml file, which is the very first character in the xml file, so the file was not identified to be a valid xml file. Removing the BOM from the xml file fixed my problem, however, I did not spend much time in fixing using B2B, the vendor (sender of the file) fixed the file and started sending without BOM. So my work was easier.
The character is not visible in all XML editors, however, it was visible in JDeveloper. I used a tool to identify and remove during testing until the vendor fixed the file, the tool is called file bom detector,http://www.bryntyounce.com/filebomdetector.htm
Hope this helps,
Thanks,
Venkatesh

Similar Messages

How does B2B Adapter for Inbound operation for SOA Composite works

Hai,
I am new to B2B. can any one share samples or links or doc's on B2B Adapter for inbound operation (receive)?
Can any one share B2B inbound channel configuration ?

1. How does the above can be achieved using JMS protocol?Where would you like to pitch-in JMS? You want to receive inbound message at B2B over JMS or between SOA and B2B, you want to use JMS?
For receiving inbound message at B2B over JMS, please create a non-internal listening channel at B2B. Make sure to set JMS headers -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/app_interface.htm#CACDFEAE
For using JMS between, SOA and B2B, create a JMS channel in Host TP profile and add it in the inbound agreement (for inbound scenario). For outbound scenario, create an internal listening channel and make sure that from back-end, headers mentioned on above link, are being set.
2. Will SOA Composite having B2B Adapter receive operation has first operation can get triggered automatically or not as soon as EDI----->XML message is found?Yes, it can be triggered. Provided the steps in your another thread.
3. will B2B Adapter receive operation in SOA Composite will take EDI--------> xml msg as opaque?No, if while modelling B2B adapter, you selected a doc-def otherwise yes.
Regards,
Anuj

B2B PositionalFlatFile Inbound Operation

B2B Experts,
I am working on a scenario with B2B in which i would be receiving the file through B2B (inbound operation).
The file is positional flat file, i have created the document guidelines (ecs) using the spec generator in oracle b2b editor
and generated the xsd from the ecs...now i have created the document definition in b2b console by selecting the PositionalFlatFile
document protocol and after selecting the protocol,version,type. for the document definition; i have given the xsd and ecs files
and in the identification tab;i have given the identification value as HDR, start position 1 and end position 3. In the listening channel
i have created a new listening channel and selected the Generic-file 1.0 as the message exchange protocol and gave the path in the folder name location.
And in the partners, i have created a new partner, created the agreement and deployed the same. Now when i drop the file name like NewPartner_12345.te, the file is getting picked up.
But the BPEL instance is not getting triggered.If i go to the report status, the state is MSG_COMPLETE.If i go to wire message, the state is COMPLETE. If i go to application message, it is showing the time details and all,
but the domain name, composite name, composite version, reference name, service name and resubmit count; these fields are empty. If the BPEL instance would have been triggered, these values would have been there. Why is my BPEL
instance not getting triggered ? Did i do anything wrong?
Please help me...
Thanks,
Naresh

sorry for the multiple threads...
please help me at this thread...
B2B Customer Protocol Inbound Operation
Thanks,
Naresh

B2B Custom Inbound Document

Hello All,
I was trying the B2B Custom Inbound .... i am keeping a file in a folder..that file i want my trading partner NewPartner to pick up and send that to host MyCompany and i am using B2B adapter in my BPEL composite to receive the file and do some business logic. Now, the file is picked up, but is not getting to the composite...i mean no instances for my composite in EM. when i go to the reports tab in B2B console, it says agreement not found....
The configuration I did in administration/Documents
I defined Custom--->1.0---->PurchaseOrder----->PurchaseOrderDef
And in the PurchaseOrder (Document Type) tab, in the ebMS Section, i have filled the following values...
Action Name : PurchaseOrder
Service Name : PurchaseOrder
From Role : NewPartner
To Role : MyCompany
And in the definition tab, i have given the following values...
xsd : Custom_PurchaseOrder.xsd
Identification xpath expression : /*[local-name()='PurchaseOrder']
In the listening channel of administration...
i have created a channel with generic file 1.0 protocol...
folder name: C:\Users\sunny\Desktop\B2BCustom
file name format : NewPartner_12345.dat
I haven't created any other channels for NewPartner and MyCompany Specifically....
I have created an agreement for NewPartner , selected the document definition...and deployed the code..
Now, when i keep the sample file NewPartner_12345.xml in the folder, it is getting picked up...but my composite is not receiving the file...
In B2B console, in the reports tab...the error message says like below...
Machine Info: Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUND
Please help me fix this...
Thanks a lot in advance...

Please post all B2B related questions in Oracle B2B forum -
Integration - B2B
Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type PurchaseOrder-1.0-INBOUNDMake sure that your remote TP's name is exactly what you are providing as part of file name - "NewPartner". You should also be able to see the name in the agreement you created.
Regards,
Anuj

Custom Adapter for Inbound Operations never invoked

Hi,
I created a custom J2CA Resource Adapter for Inbound operations. I implemented javax.resource.spi.ResourceAdapter interface with all required methods - start(BootstrapContext), endpointActivation(MessageEndpointFactory, ActivationSpec), etc.
I created the appropriate WSDL file according Adapter Development Cookbook. Below is an excerpt from it:
<definitions targetNamespace="urn:Adapter" .......>
<message name="Notification">
    <part name="Notification_Part" element="ns1:Svc"/>
</message>
<message name="Header">
    <part name="Header_Part" element="ServiceHeader"/>
</message>
<portType name="EventsQueue_ptt">
    <operation name="Dequeue">
      <input message="tns:Notification"/>
    </operation>
</portType>
<binding name="NotificationService" type="tns:EventsQueue_ptt">
    <jca:binding/>
    <operation name="Dequeue">
      <jca:operation ActivationSpec="acme.ActivationSpec"/>
      <input>
        <jca:header message="tns:Header" part="Header_Part"/>
      </input>
    </operation>
</binding>
<service name="EventsQueue">
    <port name="EventsQueue_pt" binding="tns:NotificationService">
      <jca:address ResourceAdapter="acme.AdapterClass"/>
    </port>
</service>
</definitions>I created a BPEL process with a partner link based on this WSDL and linked a Receive activity with it. According Adapter Concepts Guide here is what should happen when the BPEL process is deployed and started:
- The ResourceAdapter class name and the ActivationSpec parameter are captured in the WSDL extension section of the J2CA inbound interaction WSDL Adapter Integration with BPEL Process Manager Adapter Integration with Oracle Application Server Components 5-7 during design time and made available to BPEL Process Manager and Adapter Framework during run time.
- An instance of the J2CA 1.5 ResourceAdapter class is created and the Start method of the J2CA ResourceAdapter class is called.
- Each inbound interaction operation referenced by the BPEL Process Manager processes results in invoking the EndPointActivation method of the J2CA 1.5 ResourceAdapter instance. Adapter Framework creates the ActivationSpec class (Java Bean) based on the ActivationSpec details present in the WSDL extension section of the J2CA inbound interaction and activates the endpoint of the J2CA 1.5 resource adapter.
The problem is that start(BootstrapContext) and endpointActivation(MessageEndpointFactory, ActivationSpec) seem never to be invoked, the adapter is never initialized and at some point the Receive activity of the BPEL process times-out.
I put some debug System.out.println statements in these methods, but nothing appeared in the server log.
I'm using Oracle SOA Suite 10.1.3.1.
I will be grateful for any suggestions.
Regards,
Simeon
Message was edited by:
skirov

user9116351 wrote:
Hi,
I have written a custom connector for crud operations to a table in Oracle DB. The custom code class uses oracle.jdbc.OracleDriver which is present in ojdbc14.jar. I have placed this jar in ThirdParty folder of the OIM installation but I am still getting an SQLException while connecting to the DB as my custom code is unable to find the required class. Can someone guide me to some documentation that will help me get over this?
Thanks,
SaieshWhich version of OIM you are in? Also you dont need to copy ojdbc14.jar as this exists already in OIM.

Ftp Adapter Inbound operation not working

Hi All,
I'm running on SOA 11g on a Oracle Linux machine.
FtpAdapter is configured and works well for outbound operations (my test composite can put a file on a ftp location).
For inbound operation something is not working, my composite, a simple ftp adapter + bpel process, never start (no instances) .
I'm able to get the file using an ftp client (tested from the soa server machine too).
I just increased the server log and I can see the ftp communication but an exception is raised in socket operation after *FTP Adapter Project2 FTP Command: LIST, reply:[[*
*125 Data connection already open; Transfer starting.;*
This is the log:
[2011-09-17T12:57:07.780+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: enqueueLockedMessages] Spining ...........Sleeping for 2000 milliseconds oracle.tip.mediator.dispatch.db.DeferredDBLocker
[2011-09-17T12:57:07.905+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: <anonymous>] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTPManagedConnectionFactory::getPasswordCredential using mcf for credentials
[2011-09-17T12:57:07.906+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: <anonymous>] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Constructed new Managed Connection
[2011-09-17T12:57:07.907+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: <anonymous>] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Adding Event Listener
[2011-09-17T12:57:07.908+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: <anonymous>] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Constructed new CCI Connection
[2011-09-17T12:57:07.909+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Host name is '10.17.29.80'.
[2011-09-17T12:57:07.911+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Control socket SO_TIMEOUT is [15000]
[2011-09-17T12:57:07.911+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Reading reply from 10.17.29.80
[2011-09-17T12:57:07.911+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getReply2()
[2011-09-17T12:57:07.912+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getMappedCommand() with command =[USER]
[2011-09-17T12:57:07.912+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Got tuple =>MappedCommand==> command[USER], arguments=[ftpadmin]
[2011-09-17T12:57:07.912+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Sending cmd[USER ftpadmin]
[2011-09-17T12:57:07.912+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Host 10.17.29.80 FTP command: USER ftpadmin
[2011-09-17T12:57:07.912+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getReply()
[2011-09-17T12:57:07.913+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP Command: USER, reply:[[
331 Password required for ftpadmin.
[2011-09-17T12:57:07.913+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getMappedCommand() with command =[PASS]
[2011-09-17T12:57:07.913+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Got tuple =>MappedCommand==> command[PASS], arguments will not be displayed
[2011-09-17T12:57:07.913+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Sending cmd[PASS]
[2011-09-17T12:57:07.913+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Host 10.17.29.80 FTP command: PASS
[2011-09-17T12:57:07.914+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getReply()
[2011-09-17T12:57:07.915+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP Command: PASS, reply:[[
230 User logged in.
[2011-09-17T12:57:07.915+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getMappedCommand() with command =[PASV]
[2011-09-17T12:57:07.915+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Got tuple =>MappedCommand==> command[PASV], arguments=[null]
[2011-09-17T12:57:07.915+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Sending cmd[PASV]
[2011-09-17T12:57:07.916+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Host 10.17.29.80 FTP command: PASV
[2011-09-17T12:57:07.916+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getReply()
[2011-09-17T12:57:07.916+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP Command: PASV, reply:[[
227 Entering Passive Mode (10,17,29,80,200,109).
[2011-09-17T12:57:07.917+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Passive: ip = 10.17.29.80, port = 51309
[2011-09-17T12:57:07.917+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Connecting to 10.17.29.80:51309
[2011-09-17T12:57:07.918+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getMappedCommand() with command =[LIST]
[2011-09-17T12:57:07.918+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Got tuple =>MappedCommand==> command[LIST], arguments=[input]
[2011-09-17T12:57:07.918+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Sending cmd[LIST /input]
[2011-09-17T12:57:07.918+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Host 10.17.29.80 FTP command: LIST /input
[2011-09-17T12:57:07.918+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP::getReply()
[2011-09-17T12:57:07.919+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 FTP Command: LIST, reply:[[
125 Data connection already open; Transfer starting.
[2011-09-17T12:57:07.922+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 UnixFtpListParser::doConfig endpointProperties=[ {SingleThreadModel=true, Recursive=false, PollingFrequency=30, bpel.process.revision.id=Project2, bpel.process.guid=default/Project2!1.0*soa_64b06fdd-9667-4739-8835-5a585f55abb8:getMyFile, UseHeaders=false, IncludeFiles=.*\..*, wsdl.service.name=getMyFile, DeleteFile=true, MinimumAge=0, PhysicalDirectory=/input, wsdl.service.port.jcaAddress.adapterInstanceJndi=eis/Ftp/CustomAdapter, FileType=ascii, instance=0}], [false]
[2011-09-17T12:57:08.303+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: run] Locker running
[2011-09-17T12:57:08.304+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: lockMessages] Trying to obtain locks
[2011-09-17T12:57:08.304+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: beginTransaction] Transaction begins
[2011-09-17T12:57:08.304+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:08.304+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:08.305+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: beginTransaction] TransactionManager begin
[2011-09-17T12:57:08.305+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:08.305+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:08.307+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.error] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.error.ErrorDBLocker] [APP: soa-infra] [SRC_METHOD: lock] Updated rows :0
[2011-09-17T12:57:08.308+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: lockMessages] Obtained locks
[2011-09-17T12:57:08.308+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: commitTransaction] Commiting Transaction
[2011-09-17T12:57:08.308+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:08.308+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:08.308+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: commitTransaction] TransactionManager commit
[2011-09-17T12:57:08.310+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.error] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.error.ErrorDBLocker] [APP: soa-infra] [SRC_METHOD: getLockedMessages] Error instance list size :0
[2011-09-17T12:57:08.311+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1b5b1ef] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: enqueueLockedMessages] Spining ...........Sleeping for 5000 milliseconds oracle.tip.mediator.common.error.ErrorDBLocker
[2011-09-17T12:57:09.829+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: run] Locker running
[2011-09-17T12:57:09.829+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: lockMessages] Trying to obtain locks
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: beginTransaction] Transaction begins
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: beginTransaction] TransactionManager begin
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.dispatch.db] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.dispatch.db.DeferredDBLocker] [APP: soa-infra] [SRC_METHOD: lock] Obtaining locks for max rows 200
[2011-09-17T12:57:09.830+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.dispatch.db] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.dispatch.db.DeferredDBLocker] [APP: soa-infra] [SRC_METHOD: lock] Counter reset as end of cycle
[2011-09-17T12:57:09.831+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: lockMessages] Obtained locks
[2011-09-17T12:57:09.831+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: commitTransaction] Commiting Transaction
[2011-09-17T12:57:09.831+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] TransactionManager status
[2011-09-17T12:57:09.831+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: getTransactionStatus] Getting Transaction status
[2011-09-17T12:57:09.831+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.JTAHelper] [APP: soa-infra] [SRC_METHOD: commitTransaction] TransactionManager commit
[2011-09-17T12:57:09.833+02:00] [soa_server1] [TRACE:32] [] [oracle.soa.mediator.common.listener] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@119f93f] [userId: <anonymous>] [ecid: 0000J9mBB^i6qID5zBo2yW1ESnuZ000001,0] [SRC_CLASS: oracle.tip.mediator.common.listener.DBLocker] [APP: soa-infra] [SRC_METHOD: enqueueLockedMessages] Spining ...........Sleeping for 2000 milliseconds oracle.tip.mediator.dispatch.db.DeferredDBLocker
[2011-09-17T12:57:09.969+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Timed out in [2046] msecs
[2011-09-17T12:57:09.970+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 Exception caught while reading control socket
[2011-09-17T12:57:09.970+02:00] [soa_server1] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@aac370] [userId: weblogic] [ecid: 0000J9r1a3a6qID5zBo2yW1ESnuZ000CS^,1:20913] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [SRC_METHOD: log] FTP Adapter Project2 [[
java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
     at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
     at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
     at java.io.InputStreamReader.read(InputStreamReader.java:167)
     at java.io.BufferedReader.fill(BufferedReader.java:136)
     at java.io.BufferedReader.readLine(BufferedReader.java:299)
     at java.io.BufferedReader.readLine(BufferedReader.java:362)
     at oracle.tip.adapter.ftp.FTPClient$BufferedTimedReader.readLine(FTPClient.java:2385)
     at oracle.tip.adapter.ftp.FTPClient.populateListResults(FTPClient.java:2562)
     at oracle.tip.adapter.ftp.FTPClient._listFilesUsingKey(FTPClient.java:2513)
     at oracle.tip.adapter.ftp.FTPClient.listFiles(FTPClient.java:753)
     at oracle.tip.adapter.ftp.FTPAgent.getFileList(FTPAgent.java:505)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:260)
     at oracle.tip.adapter.file.inbound.PollWork.processFilesInSameThread(PollWork.java:844)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:335)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Someone can point me to the right way to solve this issue?

I have posted one solution in this forum..Please check whether this can help you...
Re: FTP adapter not picking files

Change IE02 field (Customer/Vendor Data - Operator)

Hello experts,
Does anyone know if there is any BAPI or FM for changing the Operator Field (IE02-> Customer/Vendor Data -> Operator) ???
Any advice/suggestion about how to do this without using a BDC program?
Thanks in advance,
-C

Hi robert,
it will solve your problem.
CUSTOMER_ADD_DATA_CS open for input in display mode
We can use SET_DATA method and parameter i_Activity.
Reddy

Invalid endpoint uri with a new protocol (custom protocol)

Hi!
I've deployed a web service in the OSB console which has an endpoint with http protocol...(f.e. "http://myhost:port/WebService"), importing a jar which contains this files: proxy service, business service, schema and wsdl...
I added to the weblogic server a new custom protocol.The endpoint of this new protocol must be like this: "tcp://host:port"...
I've tried to redeploy the web service with the new protocol in the business service file...but when i redeploy the web service, the osb says that the uri is incorrect, because it's still having the last web service's uri : "http://myhost:port/WebService" and it doesn't match the new protocol's endpoint ( "tcp://...")...
when i do the same change in the business service...(change the business service's protocol)...the osb automatically removes the existing uri and it shows me a new endpoint uri with the new protocol to add...
does exist any way to remove the existing business service's endpoint uri when i redeploy the web service's jar in the osb console????
Thanks!!
Ingrid.
Edited by: user11144501 on 17-ene-2011 7:46

Changing URI and transport protocol itself are two different things. If you want to change URI only then that is very much possible using Customization File in OSB -
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/customization.htm#CACJCAGD
You may execute customization files using WLST as well.
But in your case you want to change the transport protocol itself which may require changes in Transport Protocol Parameters (and other dependent settings), so it may not be possible to do the same using script. I think for changing transport protocol, you have to manually update all the service's configurations on sbconsole or in OEPE.
Regards,
Anuj

Creating a custom IDoc inbound function module

I have created a custom idoc.I wanted to create a custom IDoc inbound function module, this Function module will provide to launch a BAPI .Tell me how to "create" inbound function module for the custom idoc ?

Goto any standard for the Paramtetres
*" IMPORTING
*"     REFERENCE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"     REFERENCE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*"     REFERENCE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"     REFERENCE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"     REFERENCE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"     REFERENCE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*"     REFERENCE(DOCUMENT_NUMBER) LIKE VBAK-VBELN
*" TABLES
*"      IDOC_CONTRL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_STATUS STRUCTURE BDIDOCSTAT
*"      RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"      SERIALIZATION_INFO STRUCTURE BDI_SER
*"      EDI_TEXT STRUCTURE EDIORDTXT1 OPTIONAL
*"      EDI_TEXT_LINES STRUCTURE EDIORDTXT2 OPTIONAL
Do the below configs.
1.Recognise the funcmod as Inbound -BD51
2.Register the Function module in WE57 .
3.we42 Process code .
4. WE20 -PARTNER Profile
I hope it resolves ur Query.
Rgds
Sree M

Custom Protocols in LabVIEW (Sending GOOSE messages)

I know that IEC 61850 is not supported by NI but is there any way to use ethernet ports (and VIs) to send IEC 61850 GOOSE messages utilizing a PXI box?
Is the only way to implement a OSI-7 protocol or custom protocols is to use a FPGA? There has to be some other way. No?
If I was to use an FPGA, can I map FPGA I/O to ethernet cards in the PXI box? I bought a couple dual ethernet cards for my PXI box. So basically can I map virtual channels to ethernet physical layer? Probably didn't ask that correctly.

I have not used this protocol but usually you only have to implement the higher levels of the OSI, IE if this protocol is built ontop of TCP/IP or RS232 or 485 then you essentially only have to implement the upper layers (ie application/presentation) this usually can be done in software depending on the timing. There also could be 3rd party PXI cards with their own api/interface I have done this with some aero protocols before.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Netpoint 5.96: Best way to force a theme/catalog to a B2B customer

Hi,
what will be best way to assign a B2B customer with a theme/catalog. login will be requierd as the first step which is setup in the installer and by the customer industry restrict to a specific theme/catalog
thanks
MM

i setup the "ServerID" field in the Netpoint..User table to point to the assigned theme. which work as you described
thanks for your help
MM

Add customer field on operation user data. Tr IA05 - IA06

Hello,
I would add customer field on operation user data on transactions IA05 - IA06. All user fields aren't available because used.
Is there an enhancement for this on screen "operation user data" ? or can we active a custom screen ?
Thanks all.
Best regards

Hi,
Welcome To SDN!!
Check the following user exits .
CPAU0001
CPDO0001
XCZD0004 .
Regards
Kiran Sure

Using servlets for custom protocol???

Is it possible to use servlets for my own custom protocol??
Can somebody PLEASE say yes or no!!!!
I've been struggling with this for hours!
Is there an easier way?

Yes, I searched through the API docs, doesn't tell me anything. I need proven examples.
There's nothing out there .... strange!!!Actually, not so strange.
I think the original design of the servlet API permitted protocols other that HTTP, but in practice it was found that it didn't work as well. I think I've heard of an FTPServlet subclass, but that's it.

Custom functions and operation - PE04

Hi,
I required a solution for my scenario.
I have two absence quota type QA1 and QA2, if a employee has the basic pay less than 8000 then he will get assigned with QA1 and if a employee has a basic pay is equal to or greater than 8000 then he get assigned to QA2.
Similarly leave carry forward, QA1 employee has 120 days and QA2 has 240days.
I am using RPTIME00 to generate my Quota QA1 and QA2.
I need to create a custom functions and operation(PE04) for my requirement, can u help me for the same

Sughy,
If for some reason, you cannot do what Antoine suggested here's another idea.
Is your basic salary based on a pay scale structure? If it is may be you can query the pay scale group and level by using OUTWPxxxx opertation (TRFAR, TRFGB, TRFGR, TRFST). However you have to first configure generation rules for the quota buckets correctly esp for the base entitlement to be a day balance time type. Then you can write a PCR to add this time type during time evaluation by looking up the values in pay scale structure of individual employees.
There are probably several other ways to group these employees together like having the same additional time ID indicator in 0007 or having a different Daily DWS class indicator etc. The concept is to have a unique identifier if a simple grouping as mentioned by Antoine is not possible. You can seperate them and write your own PCR for both accruals as well as limiting the carry forward balances.
Hope this helps.
Good Luck.
Regards,
Raj.

Custom Protocol Handler in WL6.0

Hi
I wrote my own url protcol handler for retrieving data with custom URLs.
It works fine in a client application, but when my custom URLs are invoked
in EJB code running inside WL6, the URL is not recognized : I get a
MalformedURLException.
Note that I added a debug statement that checks the value of the system
property java.protocol.handler.pkgs
and my package is correctly listed there after many weblogic packages.
has anyone ever been able to use a custom protocol handler inside WL6 ?
regards,
Edo

Hi,
First, I want to know what kind of Windows do you use? If it is a Windows server system, there might be a security setting that prevents this, you can try to turn it off in this way:
Open the Server Manager, then select IE ESC,
Turn off the Internet Explorer Enhanced security configuration both for administrator and users in the way as the screenshot below:
If you are using a Windows client system, try to add the local address to the local intranet security setting in this way:
Open Internet Explorer, then select Internet option, click “security” item.
Select Local Intranet then click “sites”, then click “advanced”.
Add the local sites as the screenshot below:
Wade Liu
TechNet Community Support

Re: B2B Customer Protocol Inbound Operation

Similar Messages

Maybe you are looking for