Re-conning works! Six for six in post-mortgage AOR

After closing a re-fi on my home, I realized I need to move by business expenses off of my personal cards, where using the grace periods before paying them off had been increasing my utilization and holding down my Fico scores (currently in the 755 to 788 range, ) so I applied for six cards (five business and one personal) that I had been eyeing: 1) Alaska Airlines Personal (for the mileage bonus):  Instant approval , $17,500 CL, pulled EX2) AMEX Simplycash Business:  Instant approval, $15,000 CL, pulled EX3) AMEX Delta Gold Business: Instant approval, $15,000 CL, pulled EX4) Alaska Airlines Business:  Went pending, I called business UW #; they asked for proof of business, which I faxed in (28 years in business, average gross over 700K).   I waited three days, and app. was still pending, so I called in again and spoke to a helpful UW who asked specific questions about how I used credit, put me on hold for a while, then said she would have to submit to senior underwriter, but she was recommending approval; next day appoved for $5,000 CL. Pulled TU.5) US Bank Business Edge Select: Instant decline, for high outstanding balances, I called UW and asked for reconsideration, CSR was abrupt and said he would re-submit and to check back.    I checked the automated line and it was declined again, so I called UW again and got a more helpful CSR who asked some good questions about why I wanted the card and how I used credit.  She said she would add her notes to the app and re-submit and to check back in two days. On the third day I got the "Congratulations, you've been approved!" message on the automated line, but no info on the credit line yet. Pulled EX (surprisingly, but everyone seems to pull EX in SoCal.)6) Chase Marriott Business: I wanted this for the business credit and also to give me a enough points to complete an upcoming award reservation in NYC with the bonus; went pending with the "two weeks" message.  After all of the recent negative stories about Chase approvals, I let this one stay pending and waited it out for two weeks before calling in. I  have four personal and one business card with Chase and put a good amount of spend on them, but already have over 50k in CL's, so I offered to move some credit over from a personal card, but UW said she couldn't do that, and then grilled me about my business and how I used credit.  I answered all of the questions patiently and truthfully, and she put me hold for about 20 minutes before telling me she would have to send it to a senior underwriter (possibly because of my existing exposure with Chase; she wouldn't say why.)  Two days later a new Marriott free night certificate showd up in my Marriott account, and today the automated line finally said "Approved, credit line $10,000!"  Pulled EX (of course....)   So 15 days after the apps I  ended up 6 for 6.  I will now chill and meet the minimum spends, while closing some older personal cards that no longer fit my spending plans.

Congrats on your approvals and the refinanced of your mortgage.

Similar Messages

  • Std Work flow for Invoice Parking & posting

    I am working om std SAP workflow for invoice document parking :
    I have done the following activities :
    1. Activate Work flow Template for Document Completion
    Here i activated the event "Complete the Parked Log. IV Document"--> Incoming Invoice Document Parked. It is showing a green traffic light .
    In agent assignment
    Complete the Parked Log. IV Document>Complete the Parked Log. IV Document>Complete the Parked Invoice--> i have assigned the user MMCONFIG
    2. In Define Release Criteria i have the following settings :
    1000 H Credit 0.01 INR US MMCONFIG
    1000 S Debit 0.01 INR US MMCONFIG
    3. In Activate Workflow Template for Release for Posting
    Here i activated the event Incoming Invoice Complete: ReleaseRel & i m getting a green traffic light .
    In assign agents i did the following
    Release the Completed Log. IV Document>Release the Completed Log. IV Document>Release the Completed Log. IV Document i assigned the user MMCONFIG
    In Invoice Parking: Approve Release i assigned the user MMCONFIG .
    For Invoice Parking: Release Invoice
    Invoice Parking: Posting an Invoice " I AM NOT ABLE TO ASSIGN ANY USER AS THESE ARE BACKGROUND TASKS ".
    Now when do a MIR7 - Park invoice & save the invoice as complete i am getting a mail in the mail box of MMCONFIG saying :
    "Invoice Release 5105xxxxxxx 2009, Completed by MMCONFIG "
    I go & release the same invoice .
    Then i executed MIRO & tried posting the released invoice . The sysem doesnt allow me 2 post the invoice .
    It automatically goes to MIR4 transaction & forces me to save as complete
    if i try to post it the system says "Parked document is release-relevant and cannot be posted"
    Pls tell me how can I post the invoice & IF MY SETTINGS FOR THE WORKFLOW IS OK ???
    Regards
    Anis

    Firstly,  check with the Binding of the event and workflow, if they are fine
    then check if the workflow gets triggered when you are posting... to check this,
    First go to transaction SWU8 - turn on the workflow trace and then
    Proceed with posting the invoice
    go to transaction SWU8 again and then turn off the workflow trace
    go to SWU9 - to check which all workflows got triggered....
    If there is any workitem in your workflow, then go to SWI1 and select the workitem of that workflow and press shift+F8 to check the status of it and also check to which all agents it had sent...
    If possible just give a hardcoded value in the workitem for testing purpose and check if that goes properly, later on implement the rule.....
    If the workflow does not triggere - go to transaction SWETYPV and deactivate and activate the event linkage with that workflow....
    Regards,

  • I get this message on my Facebook news feed when someone posts a YouTube video. Don't know why. It's worked fine for years. I am using Safari on my iPad. If I use the Facebook app it works fine. Any thoughts. Thanks,    Access Denied   You don't have

    I get this message on my Facebook news feed when someone posts a YouTube video. Don't know why. It's worked fine for years. I am using Safari on my iPad. If I use the Facebook app it works fine. Any thoughts.
    Thanks,
    Walid
    Access Denied
    You don't have permission to access "http://fbexternal-a.akamaihd.net/embed/?" on this server.
    Reference #18.3555facd.1362007289.6945153f

    Same thing on mine, it just started happening last weekend.

  • Request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about th eamount of folks affected!

    request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about the percentage of folks affected!
    and what's with the minimalist response? We're working on it for 2 days? You can do beter than that for exsisting loyal customers can't you?

    I just spoke to a Support person with Apple.  I got the same answer, "We Don't Know", "but they are working on it...Blah, Blah.  I too live in Ventura, and have been without email since yesterday approx. 3:00 pm.
    The guy said, it's the same if you brought your computer into the shop.  We have to determine if it's hardware, or software, then fix the problem.
    Well, What about a BACK UP SERVER?  No real answer to that one.  Just, "Thanks, for your Patience."
    This really blows!!!

  • P45 MS-7516 worked great for 2 years, suddenly won't post.

    MB: P45 Diamond MS-7516 (v1.0)
    CPU: Intel Core2 Quad Q9550
    RAM: Tried many types in differing slots.
    PS: Antec 500w
    Video: ATi HD4850
    This setup worked great for close to two years, and today it suddenly won't POST. Immediately after pushing power button (most) all of the MB's LED indicators light, no beeps, no video output, but all fans spin. It stays like that until I turn off power supply.
    Here's everything I've tried so far:
    I switched out memory, tried one stick up through four in all configurations.
    I checked power supply with DMM and all is correct.
    I tried 2nd power supply (375w).
    I reset CMOS, the correct way, via battery and jumper.
    Triple checked all connections.
    Removed MB from case and set on cardboard.
    Reseated the CPU and tried a different heatsink.
    The labels on the MB's LEDS are very hard to read. Can't really see which numbers line up with which lights. It looks like pretty much all of them are on.
    1 on and blue
    2 on and red
    18-22 (top right) all on and blue
    4 on and red
    9-16 (that whole 4 group thing) Each group has one Red on.
    And there's a few more I'm leaving out. Basically they're all on.
    I don't know if this is relevant, but immediately before this problem started (remember pc worked great for 2 years) I was booting up Linux off a Sandisk thumbdrive. Ran into some boot issues, hard reset, and then wouldn't reboot or even POST from power on.
    There have been no power surges or electrical storms.
    Judging from my process of elimination, I think it must be the CPU or MB. I'm hoping I don't need to replace both. Any ideas?
    Thanks

    Thanks, that makes perfect sense.
    But given that this MB worked for so long with one PS, and just out of the blue stopped working, and that another PS (one which the store uses specifically to troubleshoot) was tried, and that all other components (RAM, VGA, CPU) have been replaced and the MB still has same behavior, it seems extremely likely that the MB is to blame. Am I wrong in that assumption?
    I'm also assuming, from the lack of responses regarding the MB's diagnostic LEDs, that having them all lit is not a meaningful code. Is that assumption correct?
    Thanks all!

  • Add a dropdown field to the task view that determines work hours for that task.

    I'm very new to MSProject.  I'm entering project data for the design, review, implementation, testing and acceptance of many subroutines.  The subroutines can be categorized into an enumeration of types. 1 - direct sub , easy, 2 - direct sub,
    average, 3 - direct sub complex, 4 - supervisory sub easy, 5 - supervisory sub average, 6 subervisory sub complex.
    I would like to create a dropdown field that once the category has been selected, the work hours are locked.  For Example if I have 50 "direct sub, easy", I want to be able to change the work hours assocated with "direct sub, easy"
    in only one place and have all "50 direct sub, easy" tasks automatically use the new work hours.
    Is there a way to do this in MSProject?

    Denis,
    Okay, let's revisit the approach. If you have six defined categories and you want to select from one of those categories for each task, then you need to create a custom field with a lookup table. Let's use the Text1 field.
    1. First add the Text1 field as a column in the view, I assume you're using the Gantt Chart view
    2. Select the heading of that column and go to: Project/Properties group/Custom Fields
    3. That will open the Custom Fields window with Text1 already pre-selected. Hit the "Lookup" button
    4. In the Edit Lookup Table window, enter each of your 6 categories. You can give each a number with a description (e.g. 1 - direct sub, easy), or just put the description in the Value field (e.g. direct sub, easy) with nothing in the description.
    5. Hit close
    Now when you select the Text1 field for any task, the lookup list will appear allowing you to chose of the the entries. Now you can create a filter as I suggested before and go through the process of setting the work value for all like category tasks.
    Hope this helps.
    John

  • Work schedule  for Ramzan on ehr reduction

    Hi
    Work schedule
    For Ramzan one hour reduction is there for all Muslim Employees,
    How to capture this on Time WS?
    In this case we need to classify employe based on community , which is not fare?
    how to resolve this?
    Also we are not considering login and logout time , so if they worked 8 hrs or 9 hrs same salary
    Kindly revert
    RX
    hi
    user do really haveing issue regarding it please let me know
    why   cant you have separate DWSR
    Edited by

    than
    than carry with the same configuration of DWS there in calendar their will be weekly off as per the policy
    but when the problem araises when an employee and employee finishes her work for 6 days  and continues for another six days
    than actually she has to take on leave but she take two leaves
    so in 2001 in the PWS it will be working day for her
    so try to create a substitute and when ever this kind of situation araises
    the end user will updates infotype 2003
    so we can change the work schedule of the employee

  • Period work schedule for workmens

    hi all ,
          I am working on TM and have a requirement that there are workmens in compony having 3 shifts 7 to 1 1 to 8 10 to 5.but for them sunday is not weekly off fixed .when they complete there any shift e.g. morning shift for 6 days then they get a weekly off.this goes on continuing for a month .which shift should be assigned to workmen that department head decides on 1 day of the month .please share ur ideas on this.how to create period work schedule for them? how to configure this in SAP .
    thanks and regards,
    Raj.

    than
    than carry with the same configuration of DWS there in calendar their will be weekly off as per the policy
    but when the problem araises when an employee and employee finishes her work for 6 days  and continues for another six days
    than actually she has to take on leave but she take two leaves
    so in 2001 in the PWS it will be working day for her
    so try to create a substitute and when ever this kind of situation araises
    the end user will updates infotype 2003
    so we can change the work schedule of the employee

  • HT201184 i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

    i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Nforce 3 Platninum and 6800GT works fine for a week or so then fails to boot.

    Hi everyone,
    I have read pretty much all the posts on the forum, but none show the exact same problem as mine, as far as I can see.
    I have an MSI Nforce 3 plat mobo (with latest BIOS), which is turning out to be the worst investment I ever got.
    My specs are as follows:
    2x512MB Kingston ram
    AMD 3.5
    pixelview 6800gt
    raptor HD
    thermaltake 480W PS
    I upgraded to the nforce 3 for the 939pin socket for my AMD chip.  I had constant freezing, so my old memory I had to chuck and buy 1GB of Kingston ram.  Using my old ATI 9800pro my system was stable. Absolutely no crashes.  I decide to buy a pixel view 6800GT AGP card to upgrade.  Cool.  Plug it in, reload windows (latest WHQL drivers from NVIDIA).  Everthing is fine, for about a week.  Then bad things start to happen.  The symptoms are:
    Turn machine on, BIOS check all ok, machine does DMI listing. As soon as the "starting windows" screen comes up, the video display goes corrupt.  Either white, with diagonal lines, or windows XP logo all over the screen several times and corrupted.  The machine does boot into windows, but the screen is blank or corrupted.  I hear the windows startup sound click in.  Press the power button, shut down the machine.  Reboot.  It usually comes up fine.
    I thought initially it was the graphics card, so I swapped it out. Reloaded windows. All works ok for about a week. Then, again same problem.  Windows event viewer shows no errors.
    My question is this: can this be fixed or is it hardware incompatibility.  If so, can I fix it tweaking the mobo settings.  I have tried the AGP fast writes, didn't work.  This looks like intrinsic Hardware incompatibility, but if it is this, why does it work for a week without any problems, and then it gets worse and worse and worse.
    If this is a hardware problem, what is the cheapest way to get out of this.  Is MSI nforce 4 any better or do I ditch pc gaming all together.  I have been gaming from XT days, and I have to say, I am totally disheartened with this whole mess.  The one thing in my life that I do want control of is a bootable, reliable PC to relax with at the end of the day.  At the moment, I just shed tears as it is turning out to be a costly nightmare.
    Any help would be greatly appreciated.  My friend has offered to buy the 6800GT from me, and give me my old 9800Pro back.  Should i do this???
    Thanks guys
    John

    Hi Makisst,
    Thanks for the reply.
    System specs are as follows:
    AMD 3500 64
    MSI Neo Platinum (nforce3)
    Creative labs Audigy2 pci card
    Pixelview 6800GT AGP 256MB
    Kingston DDR400 512Mb PC3200 400Mhz x2
    MSI K8N NEO2 PLATINUM 939 pin  (MS-7025-010)
    Western Digital Raptor™ 74.0Gb 10,000RPM SATA150
    Themaltake 480W power supply.
    I have 2 extra ATA HDs, which I have not added to the system to rule those out.
    I have a DVD player (bog standard MSI) and a CD burner (not plugged in so as to rule this out).
    The only thing I have not tried is removing the sound card (audigy 2).  What is driving me absolutely nuts is that the machine works fine for a week.  Then there is a slow degrade.  First boot, scrambled screen, second boot fine.  Then a few days later, it will only boot the thrid time around.  Then after 2 weeks, it won't boot at all.
    I have tried this card in another persons machine (the 6800GT that is), and it boots fine.
    I can honestly say I have not tried playing with the BIOS settings except for AGP fast writes, as it was working fine with the Radeon 9800 pro.  I have done two full HD formats, and completely wiped the Raptor twice now. 
    I shall have a look at the BIOS settings you recommended tonight, and see if they make a difference.  I am, to be 100% honest, a little bit scared of playing with the BIOS settings, as I really don't know what I am doing.  I see that the ppl I bought the machine off have set timings in the BIOS to 3-3-8-3 (I think, I will confirm this tomorrow), so should I leave these settings?
    I shall also remove the Audigy 2 card and see what happens.  System properties show machine has no conflicts though.  It is almost like the card is not initialising correctly.  Why this happens only after 1 week though I have no idea.  This is the third time it has started happening after 1 week. 
    The only extra software loaded is Norton, Win XP SP2 and directX9.  I really have not had it stable enough to start loading extra software.  I am getting too tired after reloading for the third time in 6 weeks.
    I will let you know tomorrow either way.
    Many thanks
    John

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Please make this a good experiance for my first post on any board.  READ ME

    Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
    So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
    So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
    So now to my problem....
    I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
    I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
    Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
    An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
    I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
    In Heath and Wealth,
    Bruce
    Mac Book Pro 1.83 GHZ 512 Ram   Mac OS X (10.4.5)  

    I FIXED IT!
    FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
    P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
    Bruce

  • Authorization for opening & Closing posting periods - OB52

    Hi,
    Is there any way to set authorization for opening & closing of posting periods in OB52?
    My scenario:
    I have 2 company codes - A & B assigned to 2 different posting period variant - say PPA & PPB.
    The user belonging to CoCd A should not be able to open/close posting period of CoCd B and vice versa.
    Is this possible through any authorization settings?
    Request your help on this.
    Regards,
    Sridevi

    Hi Sridevi
    Please go through the following:
    You can assign authorization groups for permitted posting periods. This means that, for example, some posting periods can only be opened for particular users within monthly or annual closing. You can only assign the authorization group at document header level and it only affects period 1. The authorization object is called F_BKPF_BUP (Accounting document: Authorizations for posting periods). Read the corresponding chapter on "User maintenance" in the "Assigning authorizations" topic.
    "User maintenance"
    Due to the modular authorization concept of the system, you can define authorization profiles which are tailored to the workplace of your employees. You can, for example, assign authorization to a workplace in the Accounts Receivable, Accounts Payable or General Ledger Accounting areas.
    By assigning authorizations you define which business-related objects your employees are allowed to process and which editing functions are allowed.
    In the following activities for authorization management, you must carry out the following for employees who are to work with the system:
    Assign authorizations
    The authorizations are assigned by specifying permitted values for the pre-defined objects.
    Define profiles
    In the SAP system, authorizations are grouped together in workplace profiles. Therefore one or more profiles must be allocated to the individual employee in the master record.
    I hope this helps.
    Regards
    Kavitha

  • After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other devices.  I haven't moved to ios7 yet.  Any ideas?

    After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other bluetooth devices.  I haven't moved to iOS7 yet.  Any ideas?

    What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
    And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

  • Illustrator needs a Relative mode switch or ability to set a Working directory for each AI file!

    Hi guys,
    I thought I would post in here because I find I'm wanting this feature more and more over the past year.
    This can apply to most of Adobes application but it would be great to see some file management functionality built into the applications themselves. This could then be further expanded in Bridge/Cue to incorporate more applications into the working project but at the very least the application itself the ability to control its own root existence.
    On so many occasions I require Illustrators file linking feature to be relative and NOT absolute which it currently is. The only relative capability it has is if ALL the linked assets are in the same local directory as the AI file itself and this as everyone knows breaks the first rule of proper file management.
    Many of the projects I work on uses many AI files with sometimes over 50 linked in assets in a variety of different formats from a variety of different clients (locations). I cannot easily move this project folder around without the painful task of linking all the data again and this creates a massive issue.
    Ideally an approach similar to Autodesks Maya and Max where you can set project directories. This means all the Save As and other operations will default to that working directory for that file. All linked data will then use the projects working directory as its root and allow the project to move from location to location and not be affected.
    This would Im sure benefit many other designers who work on projects with large amounts of data that may not live always in the same spot. For us we work with so many different people during a production that mobility is a must and at the moment we are finding it very difficult.
    As always, thanks for reading.
    Cheers
    Nick.

    Hello,
    First command
    So what does the wiki meen by: "DEVPATH sets the physical device. You can determine this by executing the command
    readlink -f /sys/class/hwmon/hwmon-device/device | sed -e 's/^\/sys\///'"
    Physical device of what, and what output am I suppose to get: Nothing, a list with output on where the symlinks lead, something else... In my case I got no output, if that is right, I do not know - since I do not understand what the command do.
    Seccond comand
    DEVNAME: Sets the name of the device. Try:
    sed -e 's/[[:space:]=]/_/g' /sys/class/hwmon/hwmon-device/device/name
    Does it meen like this - If I during my pwmconfig used hwmon1 wich was coretemp, and hwmon2 wich was nct6775, I should do:
    sed -e 's/[[:space:]=]/_/g' /sys/class/hwmon/hwmon1-device/device/name coretemp
    sed -e 's/[[:space:]=]/_/g' /sys/class/hwmon/hwmon2-device/device/name nct6775
    And that will direct every occurrence of hwmon1 and hwmon2 to the correct sensor chip?
    Regards
    Martin
    Last edited by onslow77 (2015-01-23 21:46:04)

Maybe you are looking for