Re: Help! Having trouble with what should be a simple v. (1/1)

[Attachment Timer_v5.zip, see below]
[Attachment Traytimr.zip, see below]
[See first answer for additional information]

[Attachment(s) for question]
Attachments:
Timer_v5.zip ‏35 KB
Traytimr.zip ‏52 KB

Similar Messages

Re: Help! Having trouble with what should be a simple v. (0/1)

Thanks to you and everyone who showed interest.
These are the files, I put them in both version 5.0 and 5.1 format.
Sub1 is an attempt to make a sub VI that would be part of a larger
prog. It works by itself but not when part of the bigger picture.
The bigger picture is really just 5 possible copies of the sub.
What should happen is when the operator enters a number into "Input
Tray Number" and hits enter, the timer starts counting up to 45
minutes. If it reaches 45 min an alarm goes off. If the "Tray in
Oven" switch is hit before the alarm state, the timer stops and
everything is reset to default.
Again, it works fine in sub1.vi. The problem comes when trying to use
5 seperate instances
of that sub in Tray Timer.vi. The timers need to
operate completely independantly of each other.
I'm SURE it's a boneheaded mistake I'm making somewhere. I just can't
see where.
Thanks for any help provided.
Steve Crowder
[email protected]

Regretfully, and with all due respect, your problems are manifold. The
While Loop construct you used does not truly monitor for the user entering
"Input Tray Number" and then start your countdown clock. The countdown
clock will run only if the appropriate "Tray in Oven" Boolean control is set
to false.
If you started Tray Timer.vi using the Run Continuously button, you have the
VI starting, seeing all of the "Tray in Oven" controls set to true, stopping
itself, then starting itself again until it sees one of the "Tray in Oven"
controls set to false. At this point the appropriate While Loop will run
until the control is reset to true. The other While Loops will have
finished running long ago because their "Tray in Oven" controls are set to
true.
The simplest solution is to enclose each of your While Loops in yet another
While Loop, the continuation indicators of which are wired within the While
Loop to either some overall Boolean control or its local or global;
enclosing all of your While Loops in a single While Loop will have the same
results as using the Run Continuously button.
Remember that the Run Continuously button should be used only for debugging
purposes. When it is time to run your final application, the Run button
should be used to start it.
Code well, and prosper!
Douglas A. Femec, Software Engineer, Viewpoint Software Solutions, Inc.
2320 Brighton-Henrietta Townline Road, Rochester, NY 14623
(716) 475-9559, ext. 18 (voice); (716) 475-9645 (fax)
[email protected]; www.ViewpointUSA.com
Steve_C wrote in message
news:[email protected]...
> Thanks to you and everyone who showed interest.
>
> These are the files, I put them in both version 5.0 and 5.1 format.
>
> Sub1 is an attempt to make a sub VI that would be part of a larger
> prog. It works by itself but not when part of the bigger picture.
> The bigger picture is really just 5 possible copies of the sub.
>
> What should happen is when the operator enters a number into "Input
> Tray Number" and hits enter, the timer starts counting up to 45
> minutes. If it reaches 45 min an alarm goes off. If the "Tray in
> Oven" switch is hit before the alarm state, the timer stops and
> everything is reset to default.
>
> Again, it works fine in sub1.vi. The problem comes when trying to use
> 5 seperate instances of that sub in Tray Timer.vi. The timers need to
> operate completely independantly of each other.
>
> I'm SURE it's a boneheaded mistake I'm making somewhere. I just can't
> see where.
>
> Thanks for any help provided.
>
> Steve Crowder
> [email protected]

HELP! Having trouble with what should be a "simple" vi. - Untitled.vi (1/1)

[Attachment Untitled.vi, see below]
[See first answer for additional information]

[Attachment(s) for question]
Attachments:
Untitled.vi ‏34 KB

Please help a newbie out with what should be a simple process.

Hey guys, I'm a pretty much a mediocre Photoshop user at best. I can use all the basic tools and usually can figure things out once I find a tutorial, but I haven't been able to find the best way to perform what seems like a simple step. I have a bunch of icons I need to edit by removing the outer grayish/transparent square.
I've tried the "Select > Color Range", and the "Magic Wand Tool", but those tools by themselves don't get the job done. I wasn't able to get either of these tools to only select the exact area I needed to remove. The issue seems to be that some of the logo's have similar gray features to them that need to remain after I delete the outer gray areas.
I need to end up with just the main logo in the square icon in a transparent .png. What would be the best way for a mediocre photoshop user to remove the outer gray portion of an image...and have all the edges just as sharp as they are now?
Thanks in advance for any help.
For reference, I've included a few of the icons here:

Thanks for the step by step instructions. I followed what you suggested and for some reason, I'm just not getting the results. The outer gray areas are not as prominent, but they are still there (but now white) once I finish the steps you suggested. I'm not sure what I'm doing wrong.
So whatever color I use in the last step to fill the new layer that is the color of the outer gray area and the main icon graphic.
For example, I tried the "?" icon. This was the before:
And here is the after (with using red the last step so it will show here)
And here's white ( I know it doesn't show anything here, but if seeing this example would help you could save it and open it)
-->
Thanks again for all the help so far. Any additional help would be very much appreciated.

Im having trouble with " what u hear "

I dont have " What u Here " turned on but when I record with Cubase SX3 its picking up everything on the computer as well as the instrument or what have you. I played with the button but I cant figure it out. Can someone help ?

This is a pain until you learn the quirks... You see the little down arrow... by selecting will determine what you are controlling...
I have this set to mute (below the slider) but make sure Microphone selected... When I get home I will double check but play with those settings

Please help - having trouble with blackberry curve 8520

My fone wont let me edit or add new contacts, except if I add them to my sim card then copy them over to my blackberry. Its a new fault that I noticed last night and I'm not sure what to do?! I tried removing the battery, and replacing it but it hasn't worked!!
Solved!
Go to Solution.

Please remove Yahoo! Messenger or Windows Live Messenger for the meantime until a new update has been released because one of these apps' newly updated version is causing the issue to most OS5 phones...
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appre

I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appreciated.

Which tool in Camera Raw, exactly? The Spot Removal Tool? Adjustment Brush?

Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
Chuck's Dilema

Hi Chuck,
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.
Also...
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.

Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive. What is the best way to get complete access to my old hd installed in my new Macbook?

I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?

Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.

I am currently having trouble with an attached PDF fill-able form...Help Please

Hello, I was wondering if you would be able to help me out?
I am having trouble with my attached PDF fill-able form, I am creating a form that has a limit of one page so in order for more room in a certain field I have added a Hyperlink to an additional fill-able(secondary) form within the Parent document (primary fill-able form. The secondary form is inserted as an attachment into the Primary form. My problem is when I open this document up in Adobe Reader, the Primary fill-able form is savable but the attached Secondary form for which the hyperlink leads to is non-savable and is a must print only. Is there a way to make the Secondary form savable as well within the same document? or is there another way I could execute what it is I am trying to achieve?
Help would be greatly appreciated please and thank you!

Here is the code, thought I had put it in the first time, guess not heh. Anyway, I converted the arrayList(accountList) to a String so that I could see the that element I am trying to index is in there, which it is. I also checked the file that i'm populating the arrayList from and it also has the element in it.
public static void getAccountNumbers() {
          accountList = LoadStoreAccounts.readCollectionObject();
          accountInfo = accountList.toString();
          JOptionPane.showMessageDialog(null, accountInfo);
          acctNumIndex = accountList.indexOf(accountNumber);
          acctIndex = String.valueOf(acctNumIndex);
          JOptionPane.showMessageDialog(null, "Index of accountNumber    is: " + acctIndex);

I just bought a new computer and im having trouble with transferring my purchased songs to my iphone please help

im having trouble with tranferring my purchased songs to my iphone . The problem is that im using my house desktop windows computer because my laptop is broking and all my songs are mainly on that one . Right now im trying to see if i can tranfer my purchased songs from the desk top itunes to my iphone .Its not showing me options for my perdiciment please help!!.

Plug it in and sync it.
What is the issue?
It will erase the current content and replace with content from the new computer.

Having trouble with flash and linking to Sliding panels - PLEASE help

Having trouble with Sliding panels and flash. Otherwise everything works fine but when I'm trying to implement the link
<a href="#" onclick="sp1.showPanel('panel1'); return false;">Panel1</a>
to a flash button I get confused. I have tried following
on (press) {
getURL("javascript:sp1.showPanel('panel1');");
and it did not work. What would you suggest? I am desperate. Please help me! Any suggestions are highly appreciated!!!!

Thanks for your answer!
I have tried both sp1.ShowPanel('panel1'); and window.sp1.ShowPanel('panel1'); they both give blank window with [object]
I have found a solution that works in other browsers, but not in IE. Well basicly it works, but after a few clicks IE freezes.
on (press) {
getURL("javascript:sp1.showPanel('panel1'); void(0);");
Would you happen to have a solution other than that? I believe that the void(0); causes the IE to freeze.

Re: Help! Having trouble with what should be a simple v. (1/1)

Similar Messages

Maybe you are looking for