Re-install battery to solve connectivity problems

During the course of the day I get all of my emails however after a night of recharging the phone I have to
I have to remove/reinstall the battery in order for my Curve to reconnect to the BES. I can place calls but until I re-install the battery I can't sync.
Re-installing the battery is the only way I can get the phone to reboot. Simply selecting the power down icon and powering up is not sufficient for the phone to reconnect.
My phone is configured to not recieve updates between 11:00 PM and 7:00 AM and I'm wondering if there is some corruption in this process that is not allowing it to resync after 7:00 AM when it should.

Did you check the issue with your BES admin?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Revert to Factory Settings solved connection problems. Any chance for 3.0?

After trying everything else I could think of to resolve my Apple TV connectivity problems, I resorted to a Factory Reset. Presto!, my Apple TV now streams music like it used to, flawlessly. I miss YouTube, the other new features and the interface that comes with the upgrade to Apple TV 3.0, but I'm afraid I'll once again lose my ability to stream music (which is currently the most important use of Apple TV in my house).
Before I attempt reinstalling Apple 3.0 again, I was wondering if anyone else has insight on this. Is there anything different about going directly from Apple TV 1.0 to Apple TV 3.0 that might have been fouled up when going from 1.0 to 2.0 to 3.0? I wonder if the incremental upgrades left "baggage" that was somehow incompatible with each other.
Any insight or advice is appreciated.
John

Is there anything different about going directly from Apple TV 1.0 to Apple TV 3.0 that might have been fouled up when going from 1.0 to 2.0 to 3.0? I wonder if the incremental upgrades left "baggage" that was somehow incompatible with each other.
Yes that's quite possible, it can occur on a mac/pc, so why not the tv. If a file becomes corrupt it may not be able to be overwritten during an update.
I'm quite religious about my maintenance and update procedures, and although there isn't really much maintenance that one can do to the tv, I do update my tv as below:
My routine is:
0. Check for itunes updates and update if available.
1. Perform a sync of your library.
2. Remove ALL cables (for around 30 seconds)
3. Swap HDMI cables for component were possible.
4. Go to itunes prefs and check 'Prevent...from auto syncing'
5. Restart the tv.
6. Download and install the update.
7. Restart itunes.
8. Re-enable autosyncing in itunes.
9. Manually resync your library if autosyncing hasn't already done so.
Whether it helps or not, I have no way of knowing, but I will say I haven't had any issues with any of my 5 tv's.
Of course it may well be a case of something in the updated software that doesn't agree with your current network/security configuration.

Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
Thanks in advance for your advice.

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete active-update.xml and possibly updates.xml (stores the update history).
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

[SOLVED] Connection problems on Atheros AR5001X+

Hi all. I've been having trouble with my internet connection. I think it happened after the last kernel upgrade.
I am using wicd and starting it with X. When I log in I get no connection at all and a message saying "No wireless networks found".
Rescanning makes no difference.
The weird part is that connecting the cable gives me an entry for the wired network and rescanning makes all available wireless networks appear as they should.
I connect to my wireless network and then disconnect the cable and then everything is fine.
Usually anyways. Sometimes I get a "bad password" error.
Everything worked perfectly until a couple of days ago and I would like to avoid a kernel downgrade, since I've never done that before.
Another weird thing is that if I just connect my ethernet cable it doesn't connect automatically, even though that worked even before I installed X and wicd.
I've read this post https://bbs.archlinux.org/viewtopic.php?id=115136, but it didn't help much.
Some info:
The Wicd properties window of my wireless network.
iwconfig when I boot
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
and iwconfig after I connect to the wireless network using the cable
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"Thomson9B0AAC"
Mode:Managed Frequency:2.437 GHz Access Point: 00:24:17:2F:2E:C3
Bit Rate=6 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=70/70 Signal level=-40 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:2 Missed beacon:0
my wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=network
update_config=1
network={
ssid="Thomson9B0AAC"
#psk="mypassword"
psk=b140ca2299f632340a01c5374541adefceffed7052478e66d31c3673d8f3cfb5
my /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Athens"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=( !usblp !snd_pcm_oss !snd_seq_oss !snd_mixer_oss)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng crond dbus hal pulseaudio @wicd @cups)
What I have tried: Using my normal ip instead of static, starting dhcpcd on boot as a daemon, using netcfg instead of wicd.
When I run this
wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
I get disconnected from the network.
And when I when I run this
dhcpcd wlan0
I get a timeout error.
That's all the info I can think of right now. And the router is probably fine cause my windows partition and a macbook don't seem to be affected.
Last edited by cipater (2011-04-19 12:15:45)

Hi, I use an ath5k as well and have solved my share of problems encountered due to various driver issues and kernel updates not being nice.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: Set the locale during daemon startup and during the boot
# process. If set to 'no', the C locale will be used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!ath_hal !ath_pci !ath_rate_amrr !ath_rate_onoe !ath_rate_sample !wlan !wlan_acl !wlan_ccmp !wlan_scan_ap !wlan_scan_sta !wlan_tkip !wlan_wep !wlan_xauth)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="ArchBook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus network crond @wicd) #netfs
my iwconfig output (I'm currently on wired net using eth0)
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
I'm using this driver:
https://aur.archlinux.org/packages.php?ID=41472
hmmm, I noticed you don't have network set in your daemons?
Anyways, hope it helps in any way.

How do I solve connection problems with Windows-PCs on a AirPort network?

I have a AirPort network with 1 AP Extreme (dual band) in bridge modeextended with two dualband AP Express and one 1st gen. AP Express. With only Macs all computers connect without problem, but when introducing PCs running Windows (7 or 8) on my wireless network both Windows and Macs often get problems getting an IP-adress from my router. When resetting my router problem is solved for a while.
Anyone with a solution?

You're going to have to be more specific with the issues, errors and diagnostic messages that you are encountering, and what particular configuration you are seeing to establish.
Screen sharing is available from Mac to Mac, and from Windows once you load a VNC client on the Windows box such as TightVNC or some other VNC client, and configure and connect it.
Here are some notes on getting Windows file clients to connect to a Mac OS X Server SMB Samba file server; you have to drop some of the Windows security requirements to allow it to connect to the Mac OS X Server box.
Microsoft Office Outlook isn't traditionally used with mail servers other than Microsoft Exchange Server. (While Outlook was good with Exchange Server and has likely gotten better over the years, it was classically rather poor when working with SMTP servers.) More commonly, Outlook Express (and now called Windows Mail) is used for this, or Mozilla Thunderbird, or another SMTP-capable mail client.
One of the first things you will want to ensure here is correct and functional DNS on your LAN; other services are entirely dependent on DNS, and your ISP DNS cannot provide valid DNS for a LAN behind a NAT device. Launch Terminal.app and issue the command sudo changeip -checkhostname and see if you get an indication that DNS is correct and no changes are required, or that there are DNS errors. (You will need to enter an administrative password for the sudo command to be accepted.)
To connect and use a mail server on the Internet, you'll need to have a public static IP address and a correct public DNS configuration, or (far less desirably, and rather more complex) a way to tunnel from a non-static IP address over to a mail gateway service of some sort. Having static IP and correct DNS is the usual approach.

HT4623 I can not get connected to App Store , download or update any apps, EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

[SOLVED] Wireless internet connection problem during installation

Hi to everyone!
I ask you a help in activating my wireless connection.
I tried to install from the recent ISO (201208 - via CD)
but I found some problems in activating a wireless connection in the first steps
of the installation guide.
My laptop is a Hp pavilion dv5 1020-el, with an Intel wireless 5100AGN internal interface.
So I did:
1) iwconfig to see my devices and the system detects my wlan0.
2) followed the Wireless_Setup page from wiki to set it
3) used wpa_supplicant and passphrase to set my ESSID name and wpa key.
4) iwconfig then showed wlan0 associated with my ESSID, with Power ON and Encryption OFF.
I could not try a connection via ping command.
Even wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf did not work.
Maybe the problem is with Encryption OFF.
Thanks for your attention!
EDIT:
I solved this way,connecting to an open wireless open network:
1.(from boot) I created a profile in /etc/network.d/ from /etc/network.d/examples
2. started a # netcfg 'my_ESSID'
3. # ping -c 3 www.google.com
All is ok! I can install Arch Linux from my smartphone as a router.
But I couldn't connect to a WPA protected wireless network yet.
Last edited by spinaluc (2012-08-18 13:08:15)

Thanks to everyone who responded to my question. The company who provides the wireless internet service to my apartment complex moved the antenna next to my unit and claims he boosted the power. As the saying goes, "The squeaky wheel gets the grease". I complained almost daily to the apartment manager and she, in turn, griped to the provider which eventually led to the "solution" above. Using Skype is still shaky as the person I'm calling isn't always able to make out what I am saying. So, I use Skype only when I REALLY need to make a phone call. Even though none of your suggestions solved my problem, I am still very, very grateful to all of you who tried. Thank you very, very much! -- Matt

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have been trying to update to iOS 5 and every time I hit update it says, " There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to update to solve this problem?

I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?

iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the

i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help please

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

PXI 8196 connection problem: plugin not installed

Hello NI:
The host PC interacting with our PXI 8196 (1052 chassis) recently had a hard drive failure, and I have had to reinstall all of our LabVIEW software and custom VIs on a new computer. The software is up and running, but I am having problems with connectivity to the PXI. The PXI is recognized in MAX, and everything is accessible (scales for our load cells, etc etc). But when I open up my labview VI project, I cannot connect to the PXI. It has a yellow triangle with an exclamation point next to it, and when I right click, the error message says that the plug-in is not installed. I have one CD that seems to have PXI drivers on it, but after installing, I had the same problem.
I was not the one who originally connected this system, and I am having trouble finding the documentation to get me back up and running. Any help would be greatly appreciated!
Eric
Solved!
Go to Solution.

So I have attached a screenshot from MAX showing all my devices and modules. Through MAX, I am able to access test panels for my modules (like the 6259 DAQ board) as well as the custom scales I have previously set up for the 9 load cells we use. The other screenshot shows where the issue still lies... when opening my LabVIEW project.
When re-installing all the software, I do not remember seeing anything titled "PXI Platform Services". Will all of the MAX connections work without Platform Services? If not, can you direct me to the correct download? We are using Windows XP and LabVIEW 8.2.
Also, I do not see the PXI or anything from NI in the Windows Device Manager. Again, maybe this is because the above Platform Services are not installed?
Thanks for your help!
Eric
Attachments:
PXI MAX screenshot.JPG ‏133 KB
PXI LV project screenshot.JPG ‏53 KB

Canadian store connection problem solved

As I said in a previous thread I would like to thank cgygeek and Timmy Y for solving the connection problem to the Canadian Itunes store. For those still trying to get in, you have to completely disable Norton Antivirus 2006 for the duration of time you want to shop in Itunes. (not just the firewall) Apparently the 2007 Norton Antitvirus doesn't create a problem for the store.
Windows XP

When you installed NIS 2007, did you use Norton's software removal tool to remove NIS 2006? I believe if you don't use this, files from NIS 2006 remain that cause the connection problem. I would suggest you talk to Symantec as they are aware of the iTunes connection problem and will help you more than Apple and you can have a live chat with a support person for free.

Wifi connection problem better with full battery

I have a macbook air I bought in 2012 (1.7 GHz Intel Core i5, 4 Gb memory) I know there are a lot of problems with other users complaining of wifi connecting problems. I have experienced the same problem but only when my battery charge is less than 98%. After my macbook has been on sleep for several hours, and has not been plugged in, the battery slowly drains and when I try to use it, it refuses to connect to any wifi connection. But as soon as I charge it up to 100% then it automatically connects, without having to restart it. Just wondering if anyone else has experienced this and if there has been any other answers from Apple regarding a potential fix for this issue....

Try this and it should reset your printer. On the front panel press the * and the # key at the same time, then press 1,2,3 in that order on the touch screen touch the left arrow button twice which will take you to the reset menu then press ok. Press the left arrow two more times and it should say "semi-full reset" press ok and this will be performed. The printer should shut down and will have to be turned back on, it will ask you for your language and your country the printer should initialize itself and should print an alignment page. NOTE: any speed dial numbers will be lost when you perform the semi-full reset.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

How I solved my connection problem

I suffered non connection problem sometime back with bluesoliel to Pc Suite,they way I solved it was like this:-(Btw Having 2pcs both on winXpProSP2,[1)bluesoliel 1.6.1.4.][2)bluesoliel 1.4.+.+]Nokia 6600,NGage and Nokia 3250)
1.I started off with N6600 Pc Suite Installation, activated it and configured Mrouter by activating every comport,(while installing Pc suite dont install Connection manager).After that shut down Pc suite, and Install N activate bluesoliel do search for device once u get device pair it and check for services.
2.By this time the serial connection service icon should light up,Click connect and you will get an ERROR message saying cant connect.Just terminate all including bluesoliel.
3.Go to device manager and update the blue tooth driver(point to c:/program/bluesoliel till you get the driver(never use automatic search)And also blue thooth Pan device driver.Machine will want to restart,DONT.
4.Go to C:/windows/inf here look for bth.inf rename to bth.bak.than restart pc
5.Ater restarting dont activate Pc suite,bluesoliel will startup automaticly do the same again detect device and services connect on serial,will get a non connecting error again ,now wait a while than you can see bluesoliel connecting on 1 of the com automaticly (in my case was com 6)once u know what com its connecting automaticly note down the com port next open bluesoliel main window go to /tools/my bluethooth device,click on an another screen will open, there click on UART,than the advance cofiguration can be accesed, here choose the right com port (whch you have noted down)set baud rate to 115200,set flow control to RTS/CTS. Restart bluesoliel again.
6.Search for device,that services, start connect on serial device,now the waiting will be shortened,the auto conectivity will swing in, fire up Pc suite it should work by now.
Hope this helpes
Azrilo
(P.s Got a few enquiries from other forum where I have posted this,and here R a few details which I might have omitted off :-)
A) After Installing Blue tooth stacks, and also Pc suite 6600, just dont keep on restarting only but do a shutdown also, cant explain but some machines seems to get connected after shutting it down and restarting.
b) Remember to Use only Pc suite for Nokia 6600 specific ver 1.1.0
c) If after doing all the stuff up there n if it still cant connect check at device manager/ click on bluethooth device and on the view choose device by connection and you should get all these bluetooth devices;-
11 Bluetooth Serial ports(e.g. COM3-COM13)
Bluetooth PAN Network Adapter
4 Bluetooth virtual Modem
Bluetooth AV Audio Device
Bluetooth SCO Audio Device
Bluetooth HID Enum device
Bluetooth Vcomm Manager
Bluetooth HID Manager
If some of them r not there do an add hardware and locate from the folder where the dongle driver is located.NEVER USE MICROSOFT DRIVERS.
Hope this covers the rest.
*in my opinion the problem of bluethooth connection to pc suite is caused by microsoft stacks and that also depending on the dongle plus the provided dongle*
Cheers.

Hello and welcome to the Forums.
DBFixit by Pimlico software can be a god send at times trying to find and fix corrupt data. Although by Palms standards it is considered 3rd party software we cannot support it, but let me tell you we recommend it all the time to our customers with data issues. It is designed to work on Palm OS's and does a great job. I'm glad it worked out for you.

Re-install battery to solve connectivity problems

Similar Messages

Maybe you are looking for