Re: MASSN Feature

Hi To All,
Getting an error in Recruitment Module in T-Code PB10 the error is "Feature MASSN is not activated Please activate before you use" the screen of PB10 is Blank nothing is appearing over there.
I tried through PB40 also there selected Intial Entry for Basic Data but the same error is coming over there also.
Requesting you to give the inputs ASAP.
Points will be rewarded for helpful answers
Regards
Pavani

MASSN Determining the Fast Entry Dialog Module
Object
    Feature
Use
    Transaction
Procedure
    You select an action for fast entry in the entry screen of transaction
    PA42.
    The return value of the feature is a dialog module taken from table DCT.

Similar Messages

Email notification and SAP Script feature M0001

Hi All,
I have posted this questions in HCM forum but am posting again in ABAP forum since SAP script is related to ABAP development also. I will appreciate your help on this.
I am trying to send a notification to a distribution list whenever there is a specific Action (MASSN). I have two issues while trying to do so -
1 - I have defined the dynamic action and feature M0001 and a SAP script in SO10. I am getting the message in my inbox but with the variables from IT0000 only. In my sap script I have defined fields from IT0002/ IT0041 etc but those fields are coming as blank in my notification. Is this because I have configured dynamic action for IT0000 only. This is how my dynamic action looks like -
0000 06 1 P **SEND IF CHANGE IN MASSN -IT0000*****
0000 06 2 P T001P-MOLGA='10'
0000 06 4 P P0000-MASSN='UP'
0000 06 6 P P0000-MASSG='02'
0000 06 8 M M0001
Do I have to define these configurations for each and every infotype (that I have used in my SAP script) in table T588Z ?
2 - I want to include the position text instead of the Position no. in my notification. How can I do that? Since position text is stored in T582 table and not in P0000 or P0001.
Thank you for reading and I will appreciate your suggestions.
Sanghamitra

Hi Kjetil,
Do you know how the problem was finally solved in your former company?
I already had a look to your post before, but for me the question is still opened. We have a corporate (non SAP) portal which users see by default when they open their browser and from where they can navigate to the SAP portal, in which we do not have single sign on.
So our users will definitely not login to the SAP Portal by themselves (nor to go to UWL, nor to display the homepage).
Maybe that an applet running on the corporate portal and doing RFC calls on the different back-ends would solve it, but I believe that might be quite a burden to develop, especially if we start talking to various non SAP systems as well. A better approach would probably be to query the portal db to look at what is in each user's UWL. But I have no idea of how the UWL data is structured in the portal and how it is updated (i.e. is the delta pull mechanism also running when a user is not logged in the portal?). I am also not sure whether there is an API in the portal to query this easily (i.e. similar to SAP_WAPI_COUT_WORKITEMS). Has anyone tried this approach before?
Cheers,
Patrick

Screen Modication and Feature change for Infotypes

Hi,
I have an issue with the Feature P0185. I will appreciate your help with this. I have a scenario where, the IT0185 screen is different for different MASSG (of the same MASSN - Action). So I created a new screen with a new variable. E.g. for reason code 01 during Prehire action, default screen 3000 and for reason code 02 during Prehire action, default the standard screen 2000. In feature P0185 I am looking at TCLAS first and after that A Master Data and Time Data after that MOLGA then MASSN then MASSG and here my return value is the screen variable. However with reason 01, it still defaults the standard screen (and not the custom screen).
I have done similar configuration for IT0002 and IT0006 and it works just fine. However with IT0185, I am unable achieve this.
I will appreciate and reward your valuable suggestion on this.
Thanks
Sanghamitra

Hai..
These are the descision parameters available for P0185.
BUKRS     Company Code
WERKS     Personnel Area
BTRTL     Personnel Subarea
SUBTY     Subtype
MOLGA     Country Grouping

Softphone feature for Cisco Jabber Client

Hello everyone,
I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
   Soft Phone Server
Server Address:           cucm02.mycompany.net
Server Port:                     2748
Server Protocol:           --
Device:                               --
Line ID:                               --
Status:                               Disconnected
Any help or thoughts on this would be greatly appreciated! Thanks!
Tony

Aaron,
Here's the bit I found interesting from the reporting function:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- begin:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Select error
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Can't get packet, retrycount=3
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ReceiveData -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CPhone::setPhoneMode -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] - CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
Thanks,
Tony

HT1925 I get a message saying The feature I am trying to use is on a network resource that is unavalable when I try to open iTunes.

When I try to open iTunes a widow appears called Windows Installer. It tells me that the feature you are trying to use is on a network resource that is unavalable. It tell me to Click OK or try again or enter an alternative path to a folder containing the intallation package iTunes.msi. I suggests I should find this in a drop down box in the window. There is a box but no folder iTunes.msi. If I click the cancel button iTunes will open and work. I wish to uninstall iTunes and then reinstall it. I am finding that I can play music on iTunes OK through my sound card but if I try to play streamed music from the web in YouTube and fom My Space the music is a poor quality with crackles and distortion. Other forums suggest uninstalling iTunes and then re-installing it. I ahve tried to uninstall iTunes but it comes up with the Window noted above and then stops. I need to stop the crackle when streaming music. Please help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

SmartWebPrinting.msi feature I am trying to use is on a network that is unavailable how do i fix it?

I have bee having problems with SmartWebPrinting.msi it keeps loading up everytime i try to get on the internet or open one of my programs on my computer these are the mesges I am recieving from it: 1. the feature you are trying to use is on a network resource that is unavailable. 2. Enter an alternate path to a folder containing the instalation package 'SmartWebPrinting.msi in the box below. 3. An installation package for the product SmartWebPrinting.msi cannot be found try the installation again using a valid copy of the installation package SmartWebPrinting. msi. I am unable to load a web page correct and pages are missing and I cannot view web pages. and it wont go away and i put in the cd and it still keeps saying the same thing What do I do?
Thank you

Hi there,
Try uninstalling Smart Web Printing using the instructions in this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en
1. Expand the + sign next to: How do I upgrade from HP Smart Web Printing to HP Smart Print
2. Follow the steps under: Step one: Uninstall HP Smart Web Printing software (and then expand the + sign next to the operating system you are using)
You can then install HP Smart Print (which has the same features as Smart Web Printing) if you have a need for this software (following the instructions in this document).
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

I used to be able to open links in a new tab by clicking my middle mouse button, but now that I've updated it to the most recent update it doesn't work anymore. How do I fix this? I really love that feature. It works in IE and Chrome but not Mozilla.

Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How do I enable the macbook pro trackpad pinch open and close feature in Firefox?

TYPE OF SYSTEM: Macbook Pro, OSX V 10.5.8
My pinch and zoom function works fine with Safari. Is there a way to enable this feature in Firefox?

You can restore the zoom feature by changing the values of the related prefs on the about:config page.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
* browser.gesture.pinch.latched -> false
*http://kb.mozillazine.org/about:config
See also:
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

Follow-up to archived thread "Another Error (I think) In the 12.1 New Features Guide"

I hoped to be able to add a reply to the most recent reply on March 8 in the "Another Error (I think) In the 12.1 New Features Guide" thread (https://community.oracle.com/thread/3526588), but since that thread has been archived, I am doing what was suggested elsewhere: create a new thread referencing the old one. My reply is:
Thank you for your explanation about preferring PDF over HTML. That is perfectly fine and understandable. Also, we very much appreciate your documentation feedback in this forum, and encourage you to continue to report any issues here.
I apologize for not replying much sooner. I either didn't get or overlooked an original notification about "Recent activity" after your reply; otherwise, I would have replied then.

Thanks for that comment. I have sent a pointer to it to the writer for that book. Note that with the New Features Guide, most of the content is automatically drawn from an internal system that tracks projects and features; so if a change is needed, the writer will notify the owner of that content (typically a developer or a product manager) to investigate and (if necessary) modify the underlying data, after which the changed information will be picked up for a future revision of the book.
Also, while anyone is welcome to enter documentation comments in this forum, another option that may be more convenient for comments on specific sections is the Reader Comment area at the bottom of each HTML page (such as http://docs.oracle.com/cd/E16655_01/server.121/e17906/chapter1.htm#NEWFT495 for the page containing Section 1.5.9.8). Any comments entered in a Reader Comment area go to someone in our documentation production group, who forwards them to the appropriate writers.
However, if a comment involves multiple HTML pages or books, or if you want the matter to be in a public forum for visibility and searchability, posting in this forum is a good option.

Questions on the features of a textarea.

Hi experts,
I am working on Documaker 12.0.1. I have some doubt related to the feature of a textarea mentioned below. Could you please put a light on it ?
_1. Sizing_
     a- Can grow and shrink
     b- Can span pages
     c- Must fit on page
     d- Suppress variable lines
     e- Adjust top line
_2.Default (fonts)_
     a- Tab stops
I am having some problem while creating a fap. I have 2 textareas in a fap and separated by some space, when I am seeing the output the whole fap is going to second page, although it is having enough space to print in the first page itself. For some case when I am unchecking the ADJUST TOP LINE and checking CAN GROW AND SHRINK, its coming in first page. fap is auto sized also. When I am minimizing the space between two textareas to print in first page, its overlapping. Please let me know if you need any more information..
Thanks,
Bikas Ranjan

You mention multiple options that can affect the result in numerous ways. For instance, 'Must fit' means that the text area must fit on a page if it can. So even with the can span turned on, the text might move as an entirety to the next page if it can't stay as a whole on the first page.
Also note that with multiple text areas on a page, only the one text area that is formatting is allowed to split during that format. That means if you put two text areas one above the other and then make the top one grow, the bottom text area is "pushed". And if it encounters the bottom of the page, that text area will go to the next page - even if you had the split option on that one too. This behavior is not normally a problem when you consider that sections are mapped from top to bottom, but if you are using a different order or unusal sized items, it can get in the way.

Magic Mouse and Employing Pinch to Open and Close Feature

I have purchased a magic mouse and would like to employ the "pinch to open & close" features (option on multi-touch trackpad) with the magic mouse. This is not the same as zoom (e.g. hold control key with mouse wheel).
I have tried using bettertouchtool and magicprefs, but it appears that neither accommodates this feature easily. If there were a keyboard shortcut to employ this feature then I think I can assign it to a magic mouse gesture via BTT or Magic Prefs, but I cannot find such a keyboard shortcut.
Does anyone have any ideas?

It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
Try turning over the mouse so the compartment panel faces you, optical sensor topmost. Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

I have macbook pro. The pinch open and close is not working in firefox 4, but works in safari. How can I get that feature back

To find pinch open and close and how it works in macbook pro go to the apple icon. Open system preferences and the choose trackpad. Each item is illustrated.

You can restore the zoom feature by changing the values of the related prefs on the about:config page.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
* browser.gesture.pinch.latched -> false
*http://kb.mozillazine.org/about:config
See also:
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

How can I merge all of the new FF windows that are open into one window with multiple tabs? Safari has a merge windows feature that I like. This is really nice when conducting reasearch on multiple sites at the same time.

When I clik on weblinks they all open into new windows making it somewhat painful to clik on window in the menu bar to go to each new page. I would rather have a feature that would allow me to merge all of those individual windows into tabs within one page.
== This happened ==
Every time Firefox opened

Thank you. That worked. I was able to open 1 window with multiple tabs. Thanks cor-el!

Re: MASSN Feature

Similar Messages

Maybe you are looking for