Re: MSI Gaming 5 Z97 not recognizing keyboard and boot devices.

Jaspericus, open your own thread for your issue please. Don't resurrect or hijack other's. >>Please read and comply with the Forum Rules.<<

We don't assist with OEM hardware but MSI retail hardware only. >>Please read and comply with the Forum Rules.<< Contact HP about it.

Similar Messages

MacBook not recognizing Keyboard and trackpad

Our white MacBook has suddenly devepoped the problem of not recognizing any of the internal input devices. A dialog box appears seeking keyboard and trackpad connections over bluetooth on the desktop after start up. I was able to work around this with a USB keyboard and mouse. What might be the problem?

sorry you say your built in trackpad. and your built in keyboard. reboot. reset your pram. maybe your smc
see if that helps

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

HT4910 I can not back up my iPhone. it says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

My itouch is not recognized by my computer, device manager or itunes!

My itouch is not recognized by my computer, device manager or itunes. However, it will charge on a wall charger. I'm not able to upload any of my music to my itouch now because its not recognized. Ive tried connecting to 3 other computers and used 2 other cords, but the itouch still isn't recognized by any of them. I've uninstalled and reinstalled all of my apple programs and it's still not working. Any ideas?

Here are some ideas: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows, http://support.apple.com/kb/TS1538

Roxio media manager in BB Desktop not recognizing/transfering to the device.

Roxio media manager in BB Desktop Device Manager not recognizing/transfering to the device.
Read some threads. Managed a cumbersome workaround by using Roxio to take songs from CD and transfer to MP3 format. Then using Explorer to drop into media card. Spent hours trying to figure out. Since I'm not very tech savvy, REALLY appreciate your help. Because I can't get any files from my PC to work. How I can convert WMA. WPL XLS DOC files so my BB can read them? Also, anyone with general info as to why emails I send to myself take days to reach my BB Curve 8330 while other senders come thru quickly?

hello,
too many questions in a single discussion. Please re-post one question for each topic. in order to keep this forum tidy.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices. I've tried everything listed.

after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

Updating the USB driver did work. Referenced in other postings as Section 5. I guess I had not tried that one.
Thanks

MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

I have been experiencing a very odd problem with my new hardware.
Hardware
Motherboard: MSI Z97 Gaming 9 AC
CPU: Intel Core i7-4790
CPU-cooler: Scythe Mugen 4
RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
Videocard: MSI GeForce GTX 980 4GB GAMING 4G
PSU: Seasonic X-660 80+ Gold
SSD: Crucial M550 2,5" 1TB
Monitor#1: LG 34UM95-P
Monitor #2: Eizo Foris FG2421
OS: Windows 7 Professional
Issue description
The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
Click sounds
I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
Tried fixes
- Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
- Disabed XMP -> problem persists
- Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
- Reinstalled the videocard physically -> problem persists
- Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
- Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
Conclusions so far
The cause can be found in the videocard or motherboard (probably BIOS issue).
Who can shed some light on this issue?

Quote from: JLio01 on 14-November-14, 17:02:39
Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
Quote from: jotan.va on 24-November-14, 18:05:51
BTW - Did anybody try to remove the wifi module from the board and then test?
I didn't install the wifi module in the first place.
UPDATE
I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

Msi gaming z97 7 help

my custom build computer work and am not sure if i use the correct power supply connects and how many?
can any one show me or tell me how to connect my system?
corsair venguard c70 mid tower were do i connect power led - , power led + , hdd led power sw blue connectoion that have usb marks?
msi gaming board z97 7 motherboard how many do i need to use?
intel i7 4.0 ghz 1150
cpu cooler corsair h105 with 5 fans
optical drive LG
corsair 16 ram
ssd Samsung 250 gb
evga nvidia gtx 660
evga supernova 750 g2 12 cables how many of them do i need to use and which one?

Here are the standard BIOS codes. http://www.ami.com/support/doc/AMI_Aptio_4.x_Status_Codes_PUB.pdf
codes in the 50s are memory related. Codes in the 40s (pure numerics are not part of the current AMI status codes.
Without knowing whether a screen has been connected and what is displayed on the screen, we don't know at what stage the post/BIOS boot is in. That 45 could well be the CPU temp at this stage
Initial system build should have been done outside the case with one mem module, HDD (i.e. barebones) only to ensure everything starts up, at least into the BIOS. Only then is it time to mount the MB in the case. Makes life much easier to fault trace.

MSI Gaming App Not Working - Fails to open after install - Want to use OC mode

Hi, well today I just recovered my GPU from a near fry using MSI Afterburner. Luckily, with help from a moderator on this site, I was able to get it working again. I thought I fried it trying to OC it. I simply want to be able to switch between the modes it is supposed to come with. I have a MSI R9 290, and it is supposed to be equiped with 3 easy "one click" toggling between OC modes, 1007MHz, Gaming mode, 974MHz, and Silent Mode, 947MHz.
I cannot figure out how to switch between these modes. I used Afterburner and nearly fried my card. I was told not to use that, that is for advanced users, to use instead the (supposed to be bundled, but was not included in my install) MSI Gaming App, to easily switch between the 3 different modes. I downloaded the MSI Gaming App (http://download.msi.com/uti_exe/gamingApp.zip) and installed it. When I tried to run it I get this error:
======
[MSI Gaming App]
The platform does not support this application
(OK)
======
So what does this mean, that the Gaming App is not supported by Windows 7 64Bit Professional (which is what I have)?
Am I doing something wrong, did I install the wrong application. I could not find any others however.
So I damn near fried my GPU trying to use Afterburner to OC my GPU, and I am very hesitant to try using it again. At this point, I have not even reinstalled Afterburner as I fear it might, just by installing, screw me up again.
What should I do, is there anything I CAN do?
Please help this noob- Thanks for your help!
-Kris

based on S/N the card is generic, AMD reference one
those cards don't have factory OC:
http://www.msi.com/product/vga/R9-290X-4GD5-BF4.html#hero-specification
http://www.msi.com/product/vga/R9-290X-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5-BF4.html#hero-specification

MSI Wind DC110 not recognising keyboard

Hi, I have a new MSI Wind DC110. I'm trying to set it up but when I attempted to start it up, it stopped on a screen saying "Press F3 to run Recovery Tool". There is no way I can find to get past this screen. I have a wireless keyboard & mouse, and the box does not respond to any key-press. I plugged in a USB keyboard, and no lights come on and no keys work. I am completely stuck and unable to boot the box.
I found that someone listed the same problem but I could not see any answers!

There are multiple users with this problem. Did you in the meantime find an answer to your question? Could you please post it for our benefit? Thanks

Mac Quit recognizing keyboard and trackpad.

My IMac has stopped recognizing my wireless keyboard and my track pad. It still recogizes the wireless mouse. I changed batteries, rebooted, went through the pairing process multiple times. All systems appear to operate properly, but it does not find these two devices. Checked for new software, but latest is installed.

I just did a restart, rather than powering down and back up. Keyboard, trackpad, and mouse now work. Any ideas of what is happening?

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Updated To Snow Leopard And Now Not RecogNizing Admin and password

Did a search, but didn't find the same thing(Just new system not SAVING passwords).
I updated from 10.5.8 to 10.6.1. First off, many apps wouldn't open(Spinning ball), and when going to update the OSX further, the admin/password screen popped up, with no admin name, as well as no password. When inputting info, it says they're incorrect. I double-checked my account info, and it's just not recognizing me. I hesitate to do a fresh install because of the time it will take with all the apps to re-install(Plus I wiped HD 2 weeks ago). Any suggestions are appreciated.

Since this happened after installation, this forum seemed appropriate. However, after looking around more, found that a number of people(Although the minority)are having the same problem, and are talking in account and login, so off I go.

Re: MSI Gaming 5 Z97 not recognizing keyboard and boot devices.

Similar Messages

Maybe you are looking for