Re: MSI Mpower Z77 slow wifi?

I don't seem to have any connection at all to wifi (win 8 pro 64). Will this let me connect?

Sorry I thought that would be the right place to ask so as not to clutter up the board.
I have installed everything but
Intel Rapid Start Technology Driver
Intel VGA Driver.
Lucid Virtu MVP Driver
I have tried to install these but am getting the message "This computer does not meet the minimum requirements for installing the software
I cannot see the device in device manager but I do see this "microsoft kernel debug network adapter"
I can connect using Ethernet.
This is my first time build so I might be a little slow at this.
Update: So I was finally able to connect. I think windows needs to be activated first(I had an issue with his since the first time I tried I was not connected to internet) Right after I activated this started working fine. Not sure why I can't install the other drivers, but at least I can connect.

Similar Messages

MSI Mpower Z77 B2 Error

Hello all!
Sorry for bad Language from start:)
My PC:
MSI Mpower Z77
I5 2500k
PSU Fractal Design R2
Memory Stick Hynix 1600 mhz 16 gb
MSI 7970 Lightning
The problem is next, yesterday after i installed 7970 (with new waterblock, made leak test 24 hours before start with main psu, all leak test system was without power), the problem is bios and video won't post, motherboard shows b 2 (maybe it 62 but looks like B2) error, and even without video card it won't post and showing B2 error.
I already tried to clear cmos with button, battery (PSU cable unplug), switching bios, switch bios on VGA but still nothing works. I didn't touch CPU and it works all fine before install 7970.
Right now i am on work, but i will check another video.
please tell me what else can I check? Or B2 it problem only of Video? I already looked other threads, and contact with company of waterblock, they said its impossible to be problems, maybe its because of no connection on 3 pin stock cooler connector or smth?
Thanks in advance....

Quote from: badboy2k on 08-October-13, 14:52:29
if its a B2 error its the graphics card being a pain and is probably DOA (always test a card before fitting a water block (even on another computer) on its stock cooler as its easier then having to remove the waterblock just to have to put the cooler back on to do a RMA if its non functional)
first thing to try would be to remove and reseat the card to make sure its not just miss seated!
also what PSU do you have?
Hello again, thanks for fast answer!
I have this video card already half a year, and it works fine all time, before change stock cooler on waterblock i check it and it was ok!
I already reseat card about 5 times, every time PSU off and waited, my PSU if Fractal Design Newton R3 1000w. (mistake in discription).
Right now Company that send me waterblock said that on manual i need to place lightning chip (from top GPU Reactor) , but i never used it and it was ok, can it affect on B2 or not?. Can it died by my hand? But leds work fine like always when it was on stock cooler.
And the point is, even if i took off card, its still B2, even after clear cmos and all actions i made in 1 post.
DOA - dead or alive? If motherboard won't work with another video (9500 GT ) or integrated can just motherboard suddenly be dead?
Thank you in advance

MSI MPOWER Z77 Drops frequency

I have a INTEL 3770K along with MSI MPOWER Z77, I am running BIOS at Default settings with no major changes to Overclocking section. When I boot up the windows for first time the CPU frequency goes up to 3.9Ghz when in TURBO. But when I Put computer in STANDBY MODE for overnight and start the computer backup in the morning, the CPU Frequency only goes up to 3.5Ghz in TURBO ( It just wont go above 3.5GHZ). I am using latest BIOS v17.7 and Default settings at BIOS.
To Fix the issue and I have to restart windows and then 3770K will go to Max 3.9Ghz turbo and idles at 1.6Ghz, which is suppose to happen all the time. is there something wrong with my BIOS or installation of Windows 8 ?
Need Assistance

Flash to the latest bios and retest:
>>BIOSes<<

MSI Mpower Z77 w/MSI NGTX 680 Lightning

Got started on my first ever PC and I'm stuck, so please bear with me. The parts that I have are the MSI Mpower Z77 and the MSI NGTX 680 Lightning (video card). There are two 8-pin connectors on the video card which needs to be plugged in. However, reading the user guide for Mpower Z77, it mentioned an ATX 6-pin power connector on its main board. It's designated as JPWR3 (p. 1-15) and it's suppose to provide power to the graphics card. My question is, do I need to plug in the JPWR3 on the main board if I'm already connecting two 8-pin power source into the video card?
I'm pretty confused about this because I've heard varying accounts. Speaking to people, they've said that the JPWR3 not only powers the graphics card but also all the PCIe expansion slots. Don't know how true this is since there's no mention in the user guide. On the other hand, I've had some people tell me not to bother with it if I'm only using one video card; they've stated while it doesn't hurt to have JPWR3 plugged in, it won't do anything unless I'm overclocking or running SLI/Crossfire, in which case I'll be drawing lots of power.
So what to do? I am tempted by SLI...but that's a bridge I won't cross until next year. So in the meantime, should I plug in JPWR3? Any pros and cons either way? It'd be great to have some feedback or consensus. Thanks.
Oh, and if plugging JPWR3, do I use the PCIe power cable from the PSU??? It's the only 6-pin I have left.

its better to connect all the power connectors anyway to avoid problems later on in time if he upgrades! also if the PSU you have isn't capable of supplying that big an ammount of power to the board the optional header will fill in the missing shortage and your less ikely to have noposts as the graphics cards power from the slot is choked so its more just safety!
most experianced builders will say even if its not needed connect it anyway to avid problems with your build....
let me put it like this its better to have it connected and its doing nothing then to try and boot a machine and it needing it but its not connected and as a result the machine doesn't post!
the PCI power connector on the board will be active only if needed and connecting it won't cause any problems but work as a boost if needed!

MSI Mpower Z77, boot code A0/A2 hanging

Hello all,
Parts:
MSI Z77 MPower motherboard
Intel i7-3570k
Phanteks TC14 cooler
32GB Corsair Vengeance RAM (I believe it's 1600 speed, it's underneath the cooler so I haven't pulled it yet)
Samsung 840 128GB
MSI GTX650ti
IBM M1015
Nvidia Quadro NVS 420
2xPlextor M5S 120GB
Samsung 850W X-series PSU
APC 750 ES UPS
Lubuntu 14.04
(yes, I used all the display outputs and RAM )
I've recently have been having issues with my workstation which has been rock stable up to this point.
I experienced some kind of power failure (I'm not sure if it was the UPS, the PSU or something with the board itself). The UPS has had some trouble with its battery but at the time, it didn't seem to be the culprit as there were no beeps at the time. I can't remember if the displays lost power too, but I believe they were hooked up to the non-battery side of the UPS.
I've had two unexplained power failures on this workstation in about a week or two. After the latest power failure, I went to reboot the machine and I got stuck at either A2 or A0 (on the display and LED) and a black screen. I left it for a day or two before I had time to diagnose.
Just today, I pulled the SSD, and I got stuck at A0. I pulled all the cards (I ran the display off the onboard HDMI) and USB off the back (mouse, Sony headset receiver, etc). Any time I rebooted, I got the same A0 code. I have switched BIOSes, no joy. I also cleared the CMOS multiple ways (shorting the coin cell battery holder, as well as holding the button). I do get a message that the CMOS has been reset, but when I try to go into BIOS, it hung for at least a minute before I gave up. I also tried to use the Go2BIOS button, no change. I also in there somewhere tried booting off a USB stick, but seeing as how I couldn't even hit BIOS, I'm not surprised nothing changed.
The OS SSD is fine and runs off my laptop.
I haven't tested the PSU yet nor have I removed the RAM as it's buried under the Phanteks but at this point, I do believe the motherboard is buggered.
At the time of power failures, I hadn't been performing anything odd, just working away. I also haven't changed anything on the machine in a long while, and I haven't reseated the CPU so very doubtful I have bent pin(s).
Any other thoughts before I RMA the board??

Quote
I'm not entirely sure if it's good to have Quadro mixed with GTX series..
Never had a problem actually, it runs an extra 4 2D displays while the GTX650 does the 3D rendering. Works pretty well in fact after the initial setup hurdles.
Quote
Usually A0 code is given out when something's wrong with BIOS. A2 however is the last code I see before it boots (both LED and screen).
Possibly some capacitors died? Did you see through the motherboard?
I will have another look. I pulled the heatsink to get at the RAM and didn't notice anything terribly wrong, but didn't look specifically at the caps, moreso burnt spots on the board (kind of hard with a black PCB!). Double checked just now with the HS mounted the caps I can see. Don't see anything bulging or noticeably amiss.
I did get a response from MSI tech about checking if the primary BIOS was corrupted, going down that road now.

MOVED: MSI Mpower Z77 w/MSI NGTX 680 Lightning

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=164084.0

its better to connect all the power connectors anyway to avoid problems later on in time if he upgrades! also if the PSU you have isn't capable of supplying that big an ammount of power to the board the optional header will fill in the missing shortage and your less ikely to have noposts as the graphics cards power from the slot is choked so its more just safety!
most experianced builders will say even if its not needed connect it anyway to avid problems with your build....
let me put it like this its better to have it connected and its doing nothing then to try and boot a machine and it needing it but its not connected and as a result the machine doesn't post!
the PCI power connector on the board will be active only if needed and connecting it won't cause any problems but work as a boost if needed!

MSI Mpower Z77 Code 62

So I booted my computer up like normal today, and it didn't post.
I looked at the LED readout and saw it was code 62. I did some reading, and found it may be the graphics card. I took it out, and tried again. Still 62. I read also that I should unplug it completely from the wall, remove the battery, and leave it for 5 minutes. I left it for an hour, put it back in, plugged it into the wall and tried again (Graphics card still removed). Still 62.
Is this an error that means the board is faulty? I don't think it's the RAM or the CPU, but I have no way of testing them (I don't have any spare DDR3 RAM or even another computer). I also don't have any friends who I can borrow hardware off of or test things in.

Ok, problem solved (But I don't know why).
I decided to throw everything back together, GPU, RAM, SSD, HDD, etc... It booted fine.
Like I say, I don't know why this is, but it seems to be fine now.
Maybe it's because I didn't have a display connected to the integrated graphics when I didn't have the GPU installed? I don't know, but as long as I don't have to wait weeks for a new board.
Mods can close this thread now if they like, since my problem has been solved. This is a server-esque machine so it runs 24/7 anyway, so as long as it doesn't restart, I see no reason for it to be a recurring error.

MSI MPOWER Z77 BIOS troubles

After updating BIOS to version H.60 through live update, some troubles appeared. After shutdown, when I try to start the system usb(3.0) ports do not work(and so my KB and mouse). After using RESET button, system tries to reboot, black screen and turn the power off. Then it starts by itself and everything is ok. I'm currently using A-Bios. But I also tried the second one. As I understood live update flashed both of them. Is it a common issue? Thanks for suggestions/replies)

Try re-flashing with the archives from here: >>Beta BIOSes<<
Use the forum tool and follow the direction and it should correct this issue.

Ingame lagg with mpower z77

Hello,i have build my own pc.with folliowing components.mpower z77 motherboard,gtx 660 ti msi,i5 3570k processor,corsair vengeance ddr3 1600 ram.950wat power suply.all drivers installed
and all works fine.ingame 91 fps connection full bars,cpu max 10% and my mouse stops shooting for a while,when pressed down,and starts after a fraction of a second.my keybord is microsoft x6 sidewinder and mouse is logitech g700 mouse.my mouse works fine on my old pc.so dont know where its going wrong.
annyone who can give some ideas???its my first build and also first with msi parts
thx
grtz haze

Score: X2263 (61 FPS)
Submitted by haze (anonymous mode) on October 18 2012, 7:28 pm
API 3D: OpenGL 4
Graphics score: 3672 points (75 FPS)
PhysX score: 2080 points (104 FPS, GPU PhysX)
Combined score: 1212 points (24 FPS)
Duration: 130000 ms
Resolution: 1920 x 1080
Anti-aliasing: X0
Window mode: fullscreen
Primary renderer: GeForce GTX 660 Ti/PCIe/SSE2
OpenGL version: 4.2.0
Graphics drivers: 9.18.13.697 R306.97 branch r30641-13
Number of GPUs: 1
GPU 0 - NVIDIA GeForce series (10de-1183) - GPU clock: 0 MHz - Mem clock: 0 MHz - Max GPU temp: 63 °C - Max GPU load: 99 %
CPU: IntelR CoreTM i5-3570K CPU @ 3.40GHz
CPU speed: 3417 MHz
this is my result
Operating System: Windows 7 64-bit build 7601 Service Pack 1

Slow wifi on iphone 5 ios 6.1.4

hello there
i have an iphone 5 which running IOS 6.1.4 and im facnig a real slow wifi over all wifi networks !! i tried other deviscess like samsung mobiles and laptops and the speed is great !! the problem is only on the iphone !! and i dont want to upgrade to ios 7 which REALLY ***** !!! please can anyone help me out with this issue

i tried reset my network settings and all settings also and nothing changed it . about the router its not only with my router but its with all wifi networks !! i really dont want to upgrade to ios 7 coz its bright and full of crap android stuff !!
and other tips plzzzzz

Time capsule painfully slow wifi

New time capsule , painfully slow wifi , cisco works lightning fast so the issue is with the TC. Looked at forums and I see it's a common isssue. Any ideas that actually work?

Download the free iStumbler app to examine the strength of your connection.
If it's not good, look for interference with another wireless device, cordless phone, microwave oven, etc. Turn them off temporarily; if you find an offender, move it farther away. See AirPort and Bluetooth: Potential sources of wireless interference for more.
Try different WIFI channels.

AirPort Time Capsule (firmware v7.7.3) has slow wifi connection to new Surface Pro 3

I got a new Surface Pro 3 i7. I have all the updates for it. I ran into a problem that many others also ran into which was very slow WiFi performance. I utilized many troubleshooting methods and sources and I am currently inclined to believe this... the new Marvell AVASTAR Wireless-AC Network Controller drivers are not compatible with my Airport Time Capsule firmware version 7.7.3.
Has anyone else experienced this?
Is there another firmware version that works (older or newer)?
Details:
I tried all kinds of things, like changing the network drivers on the SP3 to many different versions. Many of the help forums recommended using the drivers dated 4/24/2014. This did seem to help, but not reliably. What I discovered is... if I connect using the SP3 WiFi to my network extension Airport Express on version 7.6.4, I reliably get 20-22 mbps (which is the best I can expect from my network and works great for my needs). But, when I connect to my primary network Airport Time Capsule, the best I can get is 1.5 mbps, but usually between .15 and .9 mbps. It's completely unusable in today's internet environment. At the same time, I used my iPhone and the Airport Utility to verify the connections. I used SpeedTest.net on my MacBook, iPad, iPhone and Win8.1 HP laptop to verify that every other device was getting the 20+mbps. And they did. Only the Surface Pro 3 couldn't perform when using WiFi through the Airport Time Capsule. The SP3 does achieve 20+ mbps like all my other devices, but only when connected to the Airport Express.
The articles I read said that the network drivers on the SP3 seem to require the routers to be updated to the latest versions. Both the Airport Time Capsule and the Airport Express seem to be updated. When I go into their settings using the Airport Utility, there are no updates available.
Of course this problem isn't replicated at the Microsoft store since they don't have apple routers. So, their response is to upgrade the routers. Extremely unhelpful when the Apple software is saying it is upgraded already. I can't believe this new Airport Time Capsule has to be retired because it isn't playing well with others, and I love the automatic backup it is providing for my MacBook. So, somehow, I need the Airport Time Capsule to work with the new WiFi card & drivers on my SP3, just like the SP3 is working properly with the Airport Express.

Thanks for your input!
1. No downgrade. Bummer, but understandable.
2. Completely agree!!! I did too and then I had to redo it because I couldn't install a driver. I had to start all over and reinstall Win 8 then Win 8.1 over it. It was a colossal waste of time and endless frustration. If I can just get it modestly working, I'll take it. It doesn't have to be perfect right now.
3. Great suggestion! And the Microsoft forums are also a buzz. One suggestion I tried (and it seems to be working) is to set a separate wireless network name for the 5ghz band. I haven't thoroughly tested it yet, but I'm hopeful. I t seems to have worked for some, but not others. The next thing I'll try is fixing the channel, but strangely, I didn't see that option in the AirPort Utility app on my iPhone. Is it only available through Mac/PC laptop/desktop software?
4. Yup. Sigh. I actually have an old linksys. I retired it when I went 100% apple. I was hoping that things would work smoother. And they did! Until this SP3 came into my life. Arg.
And and a few more details...
the AirPort Time Capsule is 802.11ac
the AirPort Express is 802.11n (2nd gen)
I'm wondering if it is the AC connection that is the issue. Maybe since the Express always connects with n, it is OK....
Nope. Just tested the SP3 again and it is maintaining it's connection to the AirPort Time Capsule utiling the 802.11a/n/ac mode and connecting to the 5Ghz special network name. So far so good... Fingers crossed...

Slow wifi - windows 7 on imac

Hi!
Im having slow wifi when I use windows 7 (bootcamp) on my new imac 27 late 2012.
When I use OS X I get 23-24mbits down and 4,9mbit/s up on my 25/5mbis/s connection. When using Windows 7 I get only 2mbit/s down but upload is fine. My macbook pro, stationary pc and all other devices using the same wifi connection is also fine. Wireless signal comes from AirPort Extreme base station (updated software). I noticed the problem when playing games in windows and got lagging both ingame and over mumble voice. Same problem when I connect cable directly from base station to my imac.
I have reinstalled drivers using both broadcom and windows drivers. Tried changing wireless channels on Airport base station, no change. There is no other detectable wireless networks nearby, thinking it could interfer with the signal. And as I said it works fine when I boot into OS X.
Please help =)

think you will find you will get much much more responses in the bootcamp forum
https://discussions.apple.com/community/windows_software/boot_camp

MSI MPOWER z87 BSOD on boot in RAID mode

Hello, I've just recently added a harddrive and was attempting to set up a raid and encountered this issue. I have 2 ssds - one is the boot drive, second for games, and I have 3 1tb hdd drives which I was attempting to put in a raid5. I installed the third drive today, went in to the BIOS, switched SATA mode to RAID and got an immediate BSOD before even booting to Windows. Previously, I've had the two ssd in a RAID-0 and never had this issue. The ssd are no longer in a RAID, I was hoping to only have the 3 hdd in the raid5. I'm now having to reinstall windows because the error corrupted a system file somewhere and I'm unable to repair it. Any help would be greatly appreciated.
My system is:
Windows 7-64bit
MSI MPOWER z87
Intel i7-4770k
8gb corsair vengeance RAM
2 120gb OCZ Vertex 3 SSD
3 1tb WD10ezex HDD
MSI GTX760 GPU
Rosewill Capstone 750W PSU

You cannot just change SATA modes.
http://www.overclock.net/t/1227636/how-to-change-sata-modes-after-windows-installation
Note: one mistake or missing step and you won't be able to boot again.

On my iphone 5 , i m facing slow wifi issue. Ios 6.0.2 didnt resloved it.any one please told me ios 6.1 fixed this issue or not b/c i m right now not in a mood to install the ios 6 .

On my iphone 5 , i m facing slow wifi issue. Ios 6.0.2 didnt resloved it.any one please told me ios 6.1 fixed this issue or not b/c i m right now not in a mood to install the ios 6 .

It seems that people experience slow wifi on iphone with IOS 6 under slightly different circumstances.
Some have slow/choppy video streaming, some have problems with large dropbox files, some with app store and some with podcasts.
Which is your problem AdeelRasheed?
Me personally, I have download speed when on wifi.
But only when downloading podcasts...
Running 6.0.1 or 6.1 on iPhone 5, iPhone 4 and iPad 2.
On WIFI I can download a 45 mb app from the appstore in less than a minute. I can stream Youtube and Netflix with no problems. Internet browsing - no problems.
But downloading podcasts with Instacast 3, Downcast or the Apple Podcast app happens at a rate of 20-80 kb/s when on WIFI. As soon as I switch to 3g ( 4g/LTE is not yet available from my local provider) my download speed goes to between 300kb/s and 2 mb/s.
Anyone else have this problem?

Re: MSI Mpower Z77 slow wifi?

Similar Messages

Maybe you are looking for