Re: P.O. is picking tomorrows date.
HI guru's,
While generating a P.O. it is picking the delivery date in advance i.e., if I prepare a P.O. on the current date its delivery date is auto displaying as tomorrows i.e., for 30.09.2008 it is picking 01.10.2008 where to correct this.
replies awaiting.
tuljasingh.
Dear,
It is pick from material master.
Check MM03, enter your material code.
Go in MRP2 data, Plant Delivery Time.
If you maintain 3 days as plant delivery time and purchase order is create in current date, then system calculate purchase order delivery data as 06.10.08.
If you want to remove it please remove plant delivery time from material master and if you have to change delivery date then change plant delivery time from material master, you can also change delivery date from purchase order.
Regards,
Mahesh Wagh
Similar Messages
-
Problem with payables open interface import-unable to pick invoice data
Hi,
I have put the Interface data in two staging table and then moved them to AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables.
Code:
insert into XXWU_AP_INVOICES_INTERFACE (
invoice_id,
invoice_num,
vendor_id,
vendor_site_id,
vendor_site_code,
invoice_amount,
INVOICE_CURRENCY_CODE,
invoice_date,
DESCRIPTION,
PAY_GROUP_LOOKUP_CODE,
source,
org_id,
OPERATING_UNIT
values (
ap_invoices_interface_s.nextval,
'INV345DJ',
'3317',
'14335',
'ACH NY1',
1200.00,
'USD',
to_date('01-31-2010','mm-dd-yyyy'),
'This Invoice is created for test purpose',
'WUFS SUPPLIER',
'Manual Invoice Entry',
81,
'WU_USD_OU'
insert into XXWU_AP_INVOICE_LN_INTERFACE (
invoice_id,
invoice_line_id,
line_number,
line_type_lookup_code,
amount,
org_id
values (
ap_invoices_interface_s.currval,
ap_invoice_lines_interface_s.nextval,
1,
'ITEM',
1200.00,
81
INSERT INTO AP_INVOICES_INTERFACE (SELECT * FROM XXWU_AP_INVOICES_INTERFACE);
INSERT INTO AP_INVOICE_LINES_INTERFACE (SELECT * FROM XXWU_AP_INVOICE_LN_INTERFACE);
I can very much see the data in Open Interface Invoices(Front End). But when I run the payables open interface import program with correct Operating Unit, Source and Batch Name, the program unable to pick the data from the interface tables and unable to create a invoice.
Note:
1] The program run successfully everytime, but there is no output in the output file.
2] In the Log file One Message is there saying 'Zero(0) invoices were created during the process run.'
3] All the initail setup is right, i think, because I ran the same program few days back and it was working fine and the invoices were created at that time. Now what is going wrong I am unable to figure it out.
Please help ASAP.Thanks in Advance
DJ Koch.
Edited by: DJKOCH on 17 Aug, 2010 9:51 PMCan you run the program - Payables Open Interface Import with Debug mode set to Yes.
Once the program completes sucessfully verify the log file of the program and try to find out if there are any invoices which is causing the exceptions.
Also confirm that the invoices which are in the AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables are of the correct period in which you are trying to create the invoices.
Hope this helps.
Thanks and Regards
Manish Jain. -
XI Adapter Engine Not picking the data from FTP Server ?t
Hi All
We have upgraded oracle in our landscape
from 10.0.2.0.2 to 10.2.0.4.0
we have Redwood System , which runs the interfaces
Redwood initiates Our Satellite XI system to pick the data from the ftp server
but after the upgrade , it is not able to pick the data from the ftp server .
when checked in the Satellite XI Adapter engine getting following error
"XI Engine Error occurred while connecting to the ftp server java.net.socketException:Connection Reset"
but we are able to ftp from Satellite XI Adapter engine to ftp system manually but why Satellite XI Adapter engine is not the
picking the file (ie data) from the ftp server.
Immediate Response is highly appreciated
Regards
Edited by: sidharthmellam on Nov 23, 2009 11:54 AMHi Sidharth,
Please give me the FTP connection parameters mentioned in the channel.
Did you try stopping and starting the channel ?
If not please stop and start the channel.
Also catch the default trace and paste it.
Cheers...,
Raghu. -
How to update pick up date (VBAK-ABHOD) field in sales order
I am creating sales orders using BAPI_SALESORDER_CREATEFROMDAT2 but it is not updating VBAK-ABHOD field i .e pick up date. Is there any FM which updates the pick up date VBAK-ABHOD also.
I need to update pick up date for a special type of sales orders (Delivery orders) which are created in reference to schedule agreement.
Is there any other way we can update pick up date. My last option is BDC but donot want to use it.
Thanks in Advance.
Rajesh.Hi Rajesh,
You can not find any field in BAPI Change Or Create for sales order even header change BADI is for SAP Modification only. The best way to code in form USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ, orelse you can use CALL TRANSACTION Method.
Please let me know if you have any issues.
Thanks and regards, -
Where to find Pick Release Date After Ship Confirm in Order to Cash cycle
Dear All,
In Order to Cash cycle how to find Pick Release Date. After performing the Ship Confirm Transaction, how to view when we have performed Pick Release Transaction?
Thanks in Advance.
Regards,
AdityaRun the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
Can I know you are using the transact move order ?
Thanks -
Webi does not pick correct Data
Hi Guys,
I have a webi. The Universe for the Webi is based on Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
I have checked following points already:-
1] No Resstriction at Query Level
2] No restriction at Universe Level
3] No Filters/ Restriction at Webi Level.
Can anyone suggest whats happening?
RegardsHi Ray,
It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
This will give you the idea about aggregation.
Regards
Vineeta -
Sender JDBC adapter not picking up data
Hi,
I'm using an adpater to poll dta from two tables using the below query:
SELECT TPartOrderMaster., (the editor convert the star to bold), TPartOrderDetail. FROM TPartOrderMaster INNER JOIN TPartOrderDetail ON TPartOrderMaster.OdrNo = TPartOrderDetail.OdrNo WHERE (((TPartOrderMaster.DocStatusCode)='OA'))
UPDATE TPartOrderMaster SET LastUpdatedDate= GETDATE(), DocStatusCode='OP' WHERE DocStatusCode ='OA'
However, the adapter doesn't pick any data and gives the below log continuously.
11/13/09 5:35:50 PM 7c2bb696-0832-423d-2d59-8e955a3d6e6e Processing finished successfully
11/13/09 5:35:30 PM Processing started
11/13/09 5:33:50 PM 7c2bb696-0832-423d-2d59-8e955a3d6e6e Polling interval started. Length: 120.0 seconds
I have tried running th equery in the SQL server and it works properly.
I even tried restarting the adapter, inactivating and activating it, restarted the adapter in Visual admin. There are no locks for the jdbc adapter in the Visual admin.
Can anyone please suggest what other measures can I take to solve this issue.
Thanks and Regards,
Merrilly
Edited by: Merrilly Don Thomas on Nov 13, 2009 5:50 PMSELECT TPartOrderMaster., (the editor convert the star to bold), TPartOrderDetail. FROM TPartOrderMaster INNER JOIN TPartOrderDetail ON TPartOrderMaster.OdrNo = TPartOrderDetail.OdrNo WHERE (((TPartOrderMaster.DocStatusCode)='OA'))
I doubt whether this works with Jdbc adapter even though the query fetches data when executed on database. The query selects two tables (TPartOrderMaster and TPartOrderDetail) which could be problamatic. Instead can you list out the resultant table(after join) fields in Select query instead of table names?
Refer this blog-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0202753750DB11861200566708306426End?blog=/pub/wlg/1725 -
How to pick the data based on customer number
Hi All ,
greets....
i have a requirement to select the data based on customer number and then do furthur processing .
example:
this is some 10 dcouments in customer nr:v1000
and 20 documents in customer v2000 in a internal table how to select that,
thank s in advance.thier is an internal table which is having some 1000records.
and their is 6 customers.
in which i should pick the data based on customer number.
how to write a code for that? -
How to find Pick Release Date in O2C Cycle
Dera All,
How to find Pick Release date in Order to Cash cylec after we perform the ship confirm Transaction.
Please advice me as its a requirement from my customer. Pick Release date should come in Report.
Regards,
AdityaRun the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
Can I know you are using the transact move order ?
Thanks -
Re:How to pick the date format as dd/MM/yyyy from the database
Hi all,
I am using JDev 11.1.2.3.0
My requirement is ,i want to pick the date from the database as dd/MM/yyyy format.I set the attribute as
r1.setAttribute("JobDescription",
"From" + olrow.getAttribute("PeriodFrom") + "To" + olrow.getAttribute("PeriodTo")
here periodFrom and periodTo are the date attributes.i set periodFrom and periodTo date format as dd/mm/yyyy in the VO.on UI page it is showing dd/mm/yyyy format.but it is storing in the database as yyyy/mm/dd format.Here my problem is when i set periodFrom and periodTo values to the JobDescription,the JobDescription format is showing yyy/mm/dd format.here i want to show the JobDescription also dd/mm/yyyy format on the UI page.here JobDescriptin type is string.can anyone help me out please...
Thanks,
G.ShilpaHi,
you can use SimpleDateFormat to parse Date objects to formatted Strings
SimpleDateFormat (Java Platform SE 7 )
Note that dependent in your Date type you may deal with Date or SQL Date in ADF BC. SqlDate woild need to be converted to Date first and then parsed into a formatted String. I suggest you Google for SimpleDateFormat examples
Frank -
Full repair req where its pick the data in RSA7 or RSA3
Hi,
Full repair request where its pick the data in RSA7 or RSA3.
Regards,
Narasa.Hi :
Full Repair Request :
First time you will do the Set-up in R/3 .It means you are loading entire full load.When do the repair request it will fetch Data from SSet-up tables.
Here there is no concept of Delta.
Some more Info : http://www.sap-basis-abap.com/bw/regarding-repairful-request.htm
RSA7 :
This is a Delta queue Management.So when you extract the Delta Records to BI RSA7 will send the delta Records to BI.
If you lost delta then you will use repeat Delta.Then RSA7 will come into picture.
RSA 3: This is used only for checking the data at the DS Level.
Regards
Ram. -
I have a select option for date range , the lower one should default to system data which is sy-datum , the higher one shoule default to tomorrows date, whats the syntax to put tomorrows date in the higher select option
If u need putting a range of 1 day and the lower is the system date, is useless that u display that date, but anyway.
just like ANIRUDDHA DAS said
S_DATE-SIGN = 'I'.
S_DATE-OPTION = 'BT'.
S_DATE-LOW = SY-DATUM.
S_DATE-HIGH = SY_DATUM + 1.
APPEND S_DAT.
EDIT: lol Rich Heilman won me by a few second ^^ -
Pick list date must be between order date and cancellation date
Hi all
A client gets this error:
Pick list date must be between order date and cancellation date Message[173-89]
The date is between that range.
What else could be the reason for it.
ThanksHi
Since the message you received is very user friendly - date must be between....
I guess you have two situation
1.Either operation is incorrect
- Create a similar scenario in your test environment
-Are you receiving same error
-Test with only one item so far
-Check what is the result
2 . You probably need to upgrade your patch level
It might be coming from Application error
Hope this helpls
Bishal -
How to Pick the data for SQL Server to Xcelsius
Hi all,
I am trying to create a dashboard Sales Analysis through Xcelsius in my system, but the toal data is in the SQL Server, Is't any possibility to pick the data directly from SQL server. How to connect thr templet to live data.
Could someone please explain to me.
Regards,
KiranKumar.AXCELSIUS DYNAMIC DATA SOURCE
Dynamic datasources for Xcelsius -
SD delivary report not pick up data from ship-to-party
Hi ABAPER,
I have a report which is pick up data from likp, lips,kna1.But when ever i execute this program it will display report.But in my report the ship-to-party and sold-to-party data will not display in my report. This report is open delivary report. Any one can give me solution.
Thanks in advance.
Regards,
SouravHi Saurav,
from delivery select sales order
***Ship-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr1
WHERE vbeln = sale order
AND posnr = order item
AND parvw = 'WE'.
***Bill-to-party
SELECT SINGLE kunnr FROM vbpa INTO itab-kunnr2
WHERE vbeln = sale order
AND posnr = order item
AND parvw = 'RE'.
Regards
Srimanta
Maybe you are looking for
-
Hard drive crashed on macbook pro. now i want to recover all my photos on my iPhone (iPhone photos, favorites, stream, etc..) w/ out loosing. do i simply sync my iPhone? paranoid i will wipe iPhone photos when synching to new hard drive image and new
-
[i4] Does anyone know anything about the camera "patch" is made ?
Hello everyone! The "patch" round transparent in front the camera back from my iPhone 4 does more place :-( I therefore wish to pick up the shiny metal ring. But what is this "patch"? I need to know the field to select the appropriate glue: Metal-Pla
-
Motion. Compressor and FCP
Really pleased that FCP now supports 720/50p but the ProApps 2007/02 update has broken Motion, FCP and Comprossor. In Motion I can't open the Library or File Explorer. In FCP the Motion Master Templates won't let me drop clips into the drop zones, wh
-
Risk in populating Unit of measure for commodity code (foreign trade) in ECC
We have recently implemeted product classification in GTS for the EU and US. We want to implement the transfer of tariff data from GTS to ECC via the standard GTS transactions /SAPSLL/SWN_RTR and /SAPSLL/SWN_RTR_R3. Our compliance team is concerned
-
Sqlplus can connect but can not work!
I have finished an installing of an Oracle10R2 on the OEL5.0 system. All run well except that the sqlplus can not work.I install it once more, but the results are same. What is the problem? [oracle@localhost database]$ sqlplus SQL*Plus: Release 10.2.