Re: SCM Hools

You should not launch the Server partition, it will be launched
automatically.
The Rep. Server will than call your service object when you do some integration.
You must set the FORTE_RP_SCMSERVER on the environment you launch the
repository.
For example you may launch each repository with a script like this (.bat)
set FORTE_RP_SCMSERVER=SCM/SCM/SCMServerSO
rpstart -fns %FORTE_NS_ADDRESS% -fr bt:%FORTE_ROOT%\repos\toolsRep -n toolsRep
>
Date: Mon, 18 Dec 2000 11:54:29 -0000
From: "Maredudd ap Gwyndaf" <maredudd.apgwyndafs1.com>
To: "Forte Mailing List" <forte-userslists.xpedior.com>
Subject: SCM Hools
Message-ID: <001c01c068e9$47c9f3a0$8b5810acman.s1.com>
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
I'm having some trouble running my SCM hooks. When I use Forte the hooks
don't seem to get used at all and when I look in the environtment console
(I'm using NT not Unix) it tells me that the SCMServer i created is an
installed partition but offline and when I try to start it up I get an error
message saying 'Lost ocntact with remote server while while trying to load
partition.
What I did was create a subclass of SCMServer, defined a Service Object of
that type and configured the project as a server but I'm not completely
convinced that I did this properly. If someone could explain to me exactly
what settings are necessary I would be grateful.
I then need to create and deploy an application. Again it is possible that
I didn't do this correctly and I would also be very grateful for a brief
explanation of exactly what I need to do here.
I then had to define the environment variable FORTE_RP_SCMSERVER in the
repository server's environment. I used the escript command 'setenv' to set
the env. variable to the name of the subclass of SCMServer that I creared
and I created a variable of the save name with the windows system variables
but the same error message still came up.
Maredudd

Similar Messages

Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

Hi Friends,
I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
I have noticed that 2 things .
1. E1ADRE1 field is NOT being sent by the ECC system .
2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
Has anybody faced this problem before ?
I look forward to replies.
Detailed error is given below.
Regards,
Ranjini.
Customer could not be determined
Message no. /SAPAPO/EDI010
Diagnosis
The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
The section was not available in the processed IDoc.
System Response
The system cancels processing.
Procedure
Configure the EDI convertor in such a way that the corresponding section has a value.

Hi Ranjini,
Please look into the following
1) Customer master data is fully maintained
2) Customer number ranges are fully defined in customisation
3) Customer address details are maintained
4) Is there any special characters used while defining customer data or customer
number like $, #,[ etc.,?
5) Customer int models are active in SCM side prior to IDOC processing (including
customer, demand, stocks etc)
Please confirm your findings
Regards
R. Senthil Mareeswaran.

Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

Hi,
I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
init
2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
KERNEL.TOC'
SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
What is the Solution for the above ERROR. Please help.
Thanks,
Ajay.

> I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
> So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
> OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
> And please paste the URL of those rules that this is wrong. Since I didnt read that.
It's the first entry in every forum, it contains the "Rules of Engagement" which say:
Please do not Cross post.
Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Just imagine if everyone like you would paste questions in several forums.
Markus
Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

Problem when I execute program SCM in background

Hi experts,
    I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
        matnr(40)            TYPE c,
        werks(20)            TYPE c,
        ponto_abas(10)       TYPE c,
        estoque_max(10)      TYPE c,
        cobertura(10)        TYPE c,
        estoque_seg(10)      TYPE c, " Erlon Lourenço 20/01/2011
      END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
       pernr(8)             TYPE c ,
       date(10)             TYPE c,
       er_contribuition(15) TYPE c,
       tax(15)              TYPE c,
       msg_erro(80)         TYPE c,
     END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
                                              INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
        INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA:        wa_matloc       LIKE /sapapo/matloc   OCCURS 0 WITH HEADER LINE,
             wa_matlsim      LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
             wa_matlotsz     LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix   TYPE sy-tabix,
      v_vrsioid TYPE /sapapo/apo01-vrsioid,
      v_tam     TYPE i.
    Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao    TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
             p_abas AS CHECKBOX ,
             p_est   AS CHECKBOX ,
             p_cober AS CHECKBOX ,
             p_estsg AS CHECKBOX.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
    Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*&      Form F_UPLOAD
      text
--> p1        text
<-- p2        text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
            cam(80),
         END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
                                              INITIAL SIZE 0.
RANGES: r_file       FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
         ti_entrada[],
         ti_ent,
         ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    MESSAGE i000 WITH text-e01.
    STOP.
ENDIF.
Leitura de arquivos
DO.
    READ DATASET lc_file INTO ti_ent.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
    APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
    SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
    APPEND ti_entrada.
ENDLOOP.
ENDFORM.                    " F_UPLOAD
*&      Form F_PROCESSA_BATCH
      text
--> p1        text
<-- p2        text
FORM f_processa_batch .
LOOP AT ti_entrada.
    v_tabix = sy-tabix.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-matnr
      IMPORTING
        output = ti_entrada-matnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-ponto_abas
      IMPORTING
        output = ti_entrada-ponto_abas.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_max
      IMPORTING
        output = ti_entrada-estoque_max.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-cobertura
      IMPORTING
        output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_seg
      IMPORTING
        output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
    MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
         it_matid[],
         it_locid,
         it_locid[],
         wa_matlsim,
         wa_matlsim[],
         wa_matloc,
         wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
    LOOP AT ti_entrada.
      READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
      IF sy-subrc = 0 .
        READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
        IF sy-subrc = 0.
          SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
                                                                   locid = it_locid-locid.
          IF sy-subrc = 0.
            IF p_abas = 'X'.
              wa_matloc-reord    = ti_entrada-ponto_abas.
            ENDIF.
            IF p_est = 'X'.
              wa_matloc-maxstock = ti_entrada-estoque_max.
            ENDIF.
            " IA - Erlon Lourenço - 23/01/2012
            if p_estsg = 'X'.
              wa_matloc-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
            endif.
            "FA - Erlon Lourenço - 23/01/2012
            IF p_abas = 'X'   OR
               p_est   = 'X'   OR
               p_estsg = 'X'.      " Erlon Lourenço - 23/01/2012
              APPEND wa_matloc TO wa_matloc.
            ENDIF.
            SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
            IF sy-subrc = 0.
              IF p_cober = 'X'.
                wa_matlotsz-target_dur = ti_entrada-cobertura.
                APPEND wa_matlotsz TO wa_matlotsz.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDLOOP.   " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
    SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
    IF sy-subrc = 0.
      SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
      IF wa_matlsim[] IS NOT INITIAL.
        LOOP AT ti_entrada.
          READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
          IF sy-subrc = 0 .
            READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
            IF sy-subrc = 0.
              READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
                                             locid = wa_matloc-locid.
              IF sy-subrc = 0.
                wa_matlsim-reord    = ti_entrada-ponto_abas.
                wa_matlsim-maxstock = ti_entrada-estoque_max.
                wa_matlsim-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
                MODIFY wa_matlsim INDEX v_tabix.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDLOOP. " LOOP AT ti_entrada.
      ENDIF.     " IF wa_matlsim[] IS NOT INITIAL.
    ENDIF.     " IF sy-subrc = 0. 1º
ENDIF.     "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
    EXPORTING
      iv_vb         = 'U'
    TABLES
      it_matloc     = wa_matloc
      it_matlsim    = wa_matlsim
      it_matlotsz   = wa_matlotsz
    EXCEPTIONS
      not_qualified = 1
      insert_failed = 2
      update_failed = 3
      OTHERS        = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*&      Form F_SAIDA_DADOS
      text
--> p1        text
<-- p2        text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
   DATA: lc_file TYPE string.
   lc_file = p_erros.
   CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
BIN_FILESIZE                    =
       filename                        = lc_file
FILETYPE                        = 'ASC'
     TABLES
       data_tab                        = ti_saida
FIELDNAMES                      =
    EXCEPTIONS
      file_write_error                = 1
      no_batch                        = 2
      gui_refuse_filetransfer         = 3
      invalid_type                    = 4
      no_authority                    = 5
      unknown_error                   = 6
      header_not_allowed              = 7
      separator_not_allowed           = 8
      filesize_not_allowed            = 9
      header_too_long                 = 10
      dp_error_create                 = 11
      dp_error_send                   = 12
      dp_error_write                  = 13
      unknown_dp_error                = 14
      access_denied                   = 15
      dp_out_of_memory                = 16
      disk_full                       = 17
      dp_timeout                      = 18
      file_not_found                  = 19
      dataprovider_exception          = 20
      control_flush_error             = 21
      OTHERS                          = 22
   IF sy-subrc <> 0.
     MESSAGE i005 WITH 'Error to unload file !'.
     STOP.
   ENDIF.
ENDIF.
ENDFORM.                    " F_SAIDA_DADOS
*&      Form CONSISTE
      text
--> p1        text
<-- p2        text
FORM consiste .
IF p_abas IS INITIAL AND
     p_est   IS INITIAL AND
     p_cober IS INITIAL AND
     p_estsg IS INITIAL.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
    MESSAGE i000 WITH text-e03.
    STOP.
ENDIF.
IF sy-batch IS INITIAL.
    MESSAGE i000 WITH text-e02.
    STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AM

Hi Raja,
            Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik

Distr. Key GLEI in Prod. order not getting reflected in SCM product view

Hi,
We have the CIF integration model active to transfer production orders from R/3 to SCM-APO.
When we create a production order in R/3 it is getting transferred over to SCM and can be seen in Product view for the material-plant combination.
If we have the distribution key as GLEI on the production order in R/3, and we looked at stock requirements list-MD04 the receipts were split across evenly from the start date to the end date of the production order.
However, in the product view of SCM, the material was shown as available only at the end date of the production order with the full quantity.
Please provide any pointers as to something we might have missed out that made the CIF'ing not work properly...
Thanks & Regards,
Renjith John Andrews

Hi Renjith
Yes I do mean the Production Process Model. To check setting you need to do the following:
Transaction /sapapo/scc03
Click on choose plan via PPM and enter your material and location and press change.
Double click your operation
Double-click your activity
On the components tab you should see your "Output" material (Type O in I/O Indicator field), next to this should be the consumption indicator field. This is the one that has to be set to 'C'.
Hope this helps.
Regards
Ian

Integrate SCM 5.0 with XI 3.0

Do you see any issues, integrating XI 3.0 with SCM 5.0(this comes with XI 7.0)?
Edited by: john c on Feb 7, 2008 5:38 PM
Edited by: john c on Feb 7, 2008 5:40 PM

No.

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

Memory on the redundant CSS5-SCM-2GE=

Hi all,
If a second SCM is installed in a CSS11506 Chassis,
what is the amount of memory on board.
I know the primary SCM has 288MB on Board. But some
information say that only 144MB are on the redundant
SCM Module.
Help needed urgent.
Regards
Richard

you can buy a SCM with 288Mb and 144MB.
There is no specific SCM for the redundant slot.
So what you get is what you buy.
Gilles.

Access to the ES Workplace SCM System?

Hello,
I use the HU2 SAP ERP 2005 ECC 600 system for developing different scenarios combining scripting languages and SAP. For further tests, I tryed to logon to the HU8 SAP SCM 5.0 system but my password doesn't work. It doesn't work for the HU5 and HU6 system also.
Do I have to register through another form for an SCM account, or is something else wrong there?
PS:
The password was reseted several times and I tryed to contact the ES Workplace
support team without any success.

Hi,
For me registering at the following page worked:
https://www.sdn.sap.com/irj/sdn/esareg
Best Regards,
Tarun

Remove unnecessary SD orders in SCM system

Hello,
To remove unnecessary Sales Orders regularly in SCM system I found out a program "/SAPAPO/SDORDER_DEL ". But I am unable to figure out the parameters to be used once I execute this program. Can someone please let me know, if there is a document which explains the fields in the tab of the program /SAPAPO/SDORDER_DEL :
1. Delete on database
2. Delete in SAP livecache and in Database
3. Delete All DB Sales order data
Suggestions are much appreciated.
Thanks

HI,
This is the Program Documentation available in system
Short text
ATP: Delete (SD) Orders From Database
Purpose
You use this report to delete the SD sales document data from the database. Normally, the order data remains in the database (it is not deleted as in liveCache).
In order to limit the data volume, you should schedule the report to delete the orders, if necessary, and it should be dependent on the lifetime of your orders.
Example
For example, a sales order is completed in six weeks. Such a sales order would be archived in SAP R/3 but such an archiving concept does not exist in SAP APO. You use this report to remove the sales order from the database.
Integration
A location product or a location can only be deleted if SD sales documents for this location product no longer exist in the database (that is, if, for example, no more entries exist in the tables /SAPAPO/ORDADM_I or /SAPAPO/ORDPART).
Features
A check is normally carried out before an order is deleted to see if this order still exists in liveCache. If this is the case, the order is not deleted.
You can also print out a list of the orders that cannot be deleted if you have set the relevant indicator.
In exceptional cases, you can deactivate this check and nevertheless still delete the selected orders.
If you have set the Delete all orders indicator, the order data from the database is completely deleted without any check. You should take great care when using this function.
Note
If you have deleted orders that are still being used for business purposes, you must start a new initial data supply or, if you know the orders, you must perform a further ATP check to transfer the data from SAP R/3 to SAP APO.

Ideas for SCM/APO in iPhone/Blackberry/Android

Hi everybody!
I would like to know your personal needs currently that could be solved by an mobile application.
This application would be connected to a R/3 or APO backend system.
What scenarios you can think of that could be very helpful to you?
Examples:
- See the list of Sales Orders for a product.
- Open Pur. Order n. X to get vendor information.
- Check Stock information for a product.
What can you think of?
Points to be awarded to everybody that answers!
Thank you!
Will

Hi Will,
Would (lets) assume iPhone folks need some info only on how good a business is APO making.. So my take would be more on
-Some measure of expected lost sales. may be some macro in DP/SNP. some limited dimensions of customers - products - time to be fixed. This would be approximate
-Some measure of Average cost of transportation/overruns. Assuming business was expecting deployment and load building to save on average shipping costs. This can again be with some macro.. but seems quite complicated to me. As actual shipments and freight costs would need to obtained from ECC.
-Some compsite mesaure of service level by some dimesions of customer product time.
-Demand Plan over runs.. excess inventory reports.. over decided base.
etc.. I think this poll would make best sense if you ask some SCM heads of some leading firms across industry verticals. Clearly totally different things are important to different firms. Coca firms are most interested in retail metics, steel makers would be more interested in how well PPDS is loading he resources and such.
Regards,
Loknath

Upgrade from SCM 5.1 to SCM 7.0 SR1 (with NW 7.0 EHP1 SR1)

Hi folks,
we are trying to upgrade our SCM5.1 to SCM 7.0 SR1. There seems to be a problem in the phase, where SAPup is trying to detect the needed CDs / DVDs. SAPup recognizes that "FRP" is used within the system. There appears a dialog to enter the mount points for the DVDs required for the upgrade.
It says <<Enter at least the mount point for the DVD titled "FRP Software DVD">>. All other needed media is accepted, but not the DVD with the FRP-Software.
SAP Note "1300960" explains, that as of SAP Business Suite 2008 onward, no media without a MID.XML file will be accepted for upgrades (e.g. media containing Add-Ons).
I have opended a message to SAP Support, but there is no solution / workaround until now. I cannot skip the phase and therefore it is not possible to launch / continue the entire upgrade.
SAPup Version is "7.10/7, build 31.010 for UNICODE"
Has anyone faced the same problem with no-MID.XML based media?
Thank you for any advice!
Kind regards,
Marcel Jentsch

Hi,
We just upgraded from SCM 5.0 to 7.0 sp9.
You need not deactivate the DP planning areas before upgrade.
We did not face any issues because of this.
Regards,
Ashok

Macbook Pro 13' early 2011 SCM/battery problem on Mavericks

After updating to Mac OS X Mavericks I started getting problems with battery/charging of my laptop. Mostly when I touch my laptop after inactivity it just crashes, i see black screen and when I push power button it restarts. What's more, after black screen power adapter stop charging my laptop (power led does not work) until I manually do shutdown and wait some time.
One time I even had a problem when after restarting (from black screen) fans go maximum and macbook stopped seeing battery. Only SCM reboot helped.
On Mac OS X Lion everything was great. Such things appeared just after updating to Mavericks.
Thanks for help.

You are right but thats crazy !! The whole battery is there to be consumed if needed without harming my system . Else apple should force macbooks to sleep mode when reaching this 20% !! I charged my battery when it reached 13% instead of 0% for only one time and see what happened ....
note that difference in mah in just one cycle !!! stupid batteries & chargers

Purchase Requisition Transfers from SCM 5.0 APO to R/3

I am working on SCM 5.0 -- transferring Purchase Requisitions from APO to R/3 from SNP heurristic run. I am wondering if there is any documented procedure of available options and the steps involved in setting up.
Can you transfer only certain Purchase Requisitions instead of ALL?
Can you setup approval workflow to allow the transfer of only approved PRs ?
What steps involved to get PRs from the SNP Heuristic?
I found the IMG Activity (SAP SCM Implementation Guide  Advanced Planning and Optimization  Supply Chain Planning  Supply Network Planning (SNP)  Basic Settings  Configure Transfer to OLTP system).
I shall greatly apprecaite if some one answers the questions and points me to some 'How to Guide or the steps involved in setting up'.
Thanks

Devendra,
You actually need the SCM-APO-CIF (Core Interface) Training for this. A Pre-requisite to that is the APO Overview. Have you undergone it ?
In Short i will tell you the answers you want ... I hope you will reward me with Points if you feel it was helpful.
To Transfer PRs from APO to R3 following setup is needed ..
- Do Configuration of STO (Stock Transfer) in R3. Ensure Stock Transfer PRs and STOs between the 2 Plants can be created Manually in R3. This will require you to do a Lot of MM & SD Configuration on IntraCompany STOs.
A Key Part for APO is to set the STO Order Types for the
Source and Destination Plant, Assign Vendor to the Shipping Plant, Customer to the Destination Plant .. etc. A Test of correct setup is your ability to create a PR and STO manually in R3 first before you do APO.
- Setup of all APO Locations (Plants in SAP-R3), Products (Materials in SAP-R3). These are done via the Location and Product Integration Models. Make sure you have defined the Timezone in the Plant and set the Plant in SAP as DC or Production Plant (Refer CIF Training).
- Setup of Transport Lanes in APO (done manually in APO).
You define Transport Durations here.
- You have to have the Purchase Requisition Integration Model Active for those Product Locations. To do the Integration Model all CIF Configuration including the one IMG you have described in your Question is to be done. Assuming that the Products are set to 'X0' MRP Type in R3 ... so they are set to Planning in APO.
- For Setup in "Configure Transfer to OLTP" it is best to select 'Periodic Transfer' so you can actually control the Product-Locations and Date Range of PRs APO has created. The Planning Runs create 'Change Pointers' to send the PRs to R3.
- Define in APO that you will be sending Purchase Requisitions at your Destination Location to R3. You use 'Publish Change Pointers' - /sapapo/cp1 to do this.
- The Change Pointers are created after APO Planning run which can be sent to R3 using /sapapo/c5. You should send them periodically after you're satisfied with the planning results or in Night Batch runs after your Planning run.
- To Control some type of PRs you will have to use User Exits in APO for CIF that send External Procurement / PRs from APO to R3. This is not Standard. But I am not sure why you will have different types of PRs for Stock Transfer between 2 Plants. There is no need. You can control PRs between 2 Locations to not go to R3, via the selection of locations in /sapapo/c5.
Hope you find this usefull.
Regards,
Ambrish Mathur

What is the real scm latest version ?

What is the real scm latest version/patchset ?
10g, 9i or 9.0.4 ??

There is a "latest' version of 6i and 9i and 10g. Each of these uses a similar underlying repository. Each is connected to a Designer that generates a specific release of Developer (6i gens Forms 6i, 9i gens Forms 9i, etc).
About now, the latest 10g is 9.0.4.5, while the latest 9i is 9.0.2.9, and the latest 6i is 4.11.

Re: SCM Hools

Similar Messages

Maybe you are looking for