Re: Status on RE:Reporting after many forte tasksrun

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Similar Messages

Status on RE:Reporting after many forte tasks run

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

RE: Reporting after many forte tasks run in batch mode?

Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
create distributable) you can see if the command was succesfull or not.
<<deployrep.js>> This Jscript will look for this string and it will
generate a report based on the next line in the log file.
The script assumes you have an environment variable (DESCARTES_ROOT) that
points to a folder (let's say "D:\TEST"). Under that folder you have a log
folder ("d:\test\log") which holds the deploy.log log file. You can easily
change the script to reflect your systems settings.
The generated report looks like that : <<deployrep.txt>>
Norocel Popa
Forte SysEng
(519)746-8110 x 2292
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, March 16, 1999 11:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in batch mode ?
Hi,
I would like to know if overnight builds went okay, and therefore need to
parse the log(s).
The issue is that I don't have a proper string to look for (i.e. for
grep).
If I consider 'ERROR", then the following message won't be understandable.
There might a way to cheat with the indentation (i.e. the lines with only
two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an existing
partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
"fscript", pid 22713 on node rambo in environment SuperEnv.

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Reporting after many forte tasks run in batch mode ?

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

How can I get Status of the report using after report trigger

I want to get Status of my report on GUI . I am aware that we can look into XMLP_SCHED_OUTPUT table to get all the required details but I am not aware as how I can pull data from this table and make it available on GUI screen. Or is there any way to use jobid of the report and use in Data template of the same report?
Any help on this will be greatly appreciated.

What/which GUI? One of your own making? Design it and query from the table(s) of interest, and populate fields based on the results. Which job ID? The latest or one of your choosing? Add a drop down list or menu and let the user select which job. Fairly vague requirements you've listed.

Triggering a report after the completion of processing the session

Hi Friends,
I want to know how to trigger an report after the completion of processing the session.
Thanks,
Raj

Hi
        SELECTION-SCREEN                               *
PARAMETERS: p_name     LIKE apqi-groupid,
            p_datum    LIKE apqi-credate,
            p_time     LIKE apqi-cretime,
            p_event    LIKE tbtco-eventid.
             DATA                                     *
DATA: fl_job_ok TYPE c,
      fl_event TYPE c,
      cont_sysubrc_6 TYPE i.
DATA: start_time LIKE sy-uzeit,
      start_date LIKE sy-datum,
      time       LIKE sy-uzeit,
      delta_time TYPE i.
DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
DATA:
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
                     START-OF-SELECTION                              *
START-OF-SELECTION.
DATA: a VALUE '1', b.
Controllo esistenza job:
start_time = sy-uzeit.
start_date = sy-datum.
DO.
    apqitab-creator = sy-uname.
    CALL FUNCTION 'BDC_OBJECT_SELECT'
      EXPORTING
        name                   = p_name
        datatype               = 'BDC'
    CLIENT                 = SY-MANDT
        date_from              = p_datum
    DATE_TO                =
        time_from              = p_time
    TIME_TO                =
       QSTATE                 = 'F'
        session_creator        = apqitab-creator
      TABLES
        apqitab                = apqitab
      EXCEPTIONS
        invalid_datatype       = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0.
      fl_job_ok = space.
    ELSE.
      LOOP AT apqitab.
        CASE apqitab-qstate.
          WHEN 'F'.          fl_job_ok = 'X'. EXIT.
          WHEN 'E'.          fl_job_ok = 'E'. EXIT.
          WHEN OTHERS.       fl_job_ok = space.
        ENDCASE.
      ENDLOOP.
      IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
        EXIT.
      ENDIF.
    ENDIF.
    IF start_date <> sy-datum.
      start_time = sy-uzeit.
    ENDIF.
    time = sy-uzeit.
    delta_time = time - start_time.
    IF delta_time > 1800.
      EXIT.
    ENDIF.
    REFRESH apqitab.
ENDDO.
IF fl_job_ok = 'X'. " Trovato JOB
    fl_event = 'X'.
    IF fl_event = 'X'.
Attiva evento
      CALL FUNCTION 'BP_EVENT_RAISE'
        EXPORTING
          eventid                = p_event
        EXCEPTIONS
          bad_eventid            = 1
          eventid_does_not_exist = 2
          eventid_missing        = 3
          raise_failed           = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
      ELSE.
        MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
      ENDIF.
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
    ENDIF.
ELSE.
    IF fl_job_ok = space.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ENDIF.
ENDIF.
Max

How to change the status of an incident, after it is "Confirmed"

Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank you

hi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi

HT1541 the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!

the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!
Anyone out there with any ideas?

Your dad should go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

PF STATUS IN ALV REPORT

hi,
How to use PF STATUS IN ALV REPORT?

HI,
see this code.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
     MATNR LIKE MARA-MATNR,
     ERSDA LIKE MARA-ERSDA,
     MTART LIKE MARA-MTART,
     MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = SY-REPID
   I_INTERNAL_TABNAME           = 'ITAB'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   I_INCLNAME                   = SY-REPID
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
CHANGING
    CT_FIELDCAT                  = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = SY-REPID
<b>   I_CALLBACK_PF_STATUS_SET       = 'STATUS'
   I_CALLBACK_USER_COMMAND        = 'UCOMM'</b>
I_STRUCTURE_NAME               =
   IS_LAYOUT                      = LAYOUT
   IT_FIELDCAT                    = FCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
   IT_SORT                        = SORT[]
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
   IT_EVENTS                      = EVE[]
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 5
I_SCREEN_START_LINE            = 5
I_SCREEN_END_COLUMN            = 120
I_SCREEN_END_LINE              = 25
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = ITAB
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
    HEAD-TYP = 'H'.
    HEAD-INFO = 'MATERIALS'.
    APPEND HEAD.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY       = HEAD[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
    HEAD-TYP = 'H'.
    HEAD-INFO = 'MATERIALS-LISTTOP'.
    APPEND HEAD.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY       = HEAD[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
    HEAD-TYP = 'H'.
    HEAD-INFO = 'MATERIALS-LISTEND'.
    APPEND HEAD.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY       = HEAD[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
ENDFORM.
<b>FORM STATUS USING MYMENU.
    SET PF-STATUS 'MENU' excluding MYMENU.
ENDFORM.
FORM UCOMM USING CODE STEXT.
    CASE CODE.
        WHEN 'ABC'.
        WRITE:/ 'YOU HAVE CLICKED ON ABC'.
        WHEN 'XYZ'.
        WRITE:/ 'YOU HAVE CLICKED ON XYZ'.
    ENDCASE.
ENDFORM.</b>
rgds,
bharat.

Print a report after transaction

Hi,
I want to know if there is any solution to print a report after a transaction (after commit).
when i do any modification in a table, i want to print data that have been modified.
thanks in advance for your helps.

Have you given thought for Oracle Alert.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

Hi I am having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and loading then I get an error message saying unable to download app. Eventually,after many attempts it works.

Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?

Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard

Returning to the parameter form in a report after closing the report page

hi all,
tell me a way to get the following solution
how can we return back to the parameter form of a "parameterised
report" after closing to the report window.
i ve tried a little bit with "srw_run_report"
reply me as quick as possible
prabhakaran

Try using menu options
Tools\Parameter Form Builder
you can either select/deselect any parameter from the list

SUBMIT an ABAP report after creating the WI but before completion of WI.

Dear All,
I am having an activity which sends the approval work item.
Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
I can not call this report before approval activity because i need to pass this WI ID to this report.
Please suggest some way to solve this.
Regards,
Amar

Hello,
You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
What is the purpose of this report? Why does it need the workitem id?
regards
Rick Bakker
hanabi technology

Report on production order status and shortage report

I want to know standard report on production order status and shortage report. Kindly suggest.

COOIS - Production order information system . In this report you can give system status in selection screen and in report you can get complete status details (both system and user status) .
shortage report - CO24

Re: Status on RE:Reporting after many forte tasksrun

Similar Messages

Maybe you are looking for