Re: STOC . not considered while running MRP

Hi Experts,
I having one doubt in the following scenario.
Plant1000 needs 5 qty of AB Material from 1001 , requiremnt given thro Stock transfer order ME21N. date :21.03.2008
1001 is producing the goods based on PIR. Presently, plant 1001 have stock qty of 10 Nos. as on 21.03.2008
If I run the MRP , instead of considering the stock 10 nos.
It's throwing new requiremnt of 5 Nos.
Please guide me to sort out this issue.
Thanking you
Regards
Chandru

Hi,
Alreday I have a PIR of 10 Qty in that production plant. Now i'm rasing one STOC from some other plant for 5 Nos.
It should consider the PIR as like sale order consumption on PIR. Then it should throw the PLnd order for 5 Qty.
Here tis is not happening, it's giving plnd order for 15 qty.
Please guide me.
Thanking you
Regards
Chandru

Similar Messages

STOCK OF FINISHED PRODUCT BY PIR NOT CONSIDERING WHILE TAKING MRP RUN

DEAR SAPGURUS,
I have finished product stock of 50 nos through planned independent requairement. now i am creating sales order for finished product but mrp run generate the planned order for finished product. I dont have planned order for finished product because material already have stock. what can i do please give solution.
thanks.
Regards
Atul

Hi Atul,
Please describe your problem better, it's not easy to understand...
Strategy 10 is net reqirement planning:
- SAP considers only PIRs as requirements, SOs are not considered
- SAP considers stock levels
- requirements should be LSF (check in MD04)
If you input sales order SAP won't create PldOrd for it. If you have stock and you want to create more to fulfil you SO, you have to input PIR accordingly and run MRP.
Please clarify your problem...in a way that we may understand it.
http://help.sap.com/saphelp_47x200/helpdata/en/60/9ea1536fbd11d191820000e8a5f6e6/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/e0/71bb199c9f11d191920000e8a5f6e6/frameset.htm
Thanks,
Csaba

Validation while running MRP

Hello Experts,
Currently while running MRP, system has the provision of taking material which are in scrap stock, We want to put a validation so that material of scrap location cannot be used while MRP run .
Please suggest.
Regards,
Ankur

You need to exclude the scrap storage location from MRP through IMG tcode S_ALR_87006263
Also for all the materials you need to change the MRP indicator = 1 in MMSC for that storage location. You can do it in a mass way using tcode MM17.

Infotype 0008 wage types are not considered while payroll

Hi Experts,
When i am running the payroll, all the wage types of infotype 0008 is not considered. Neither it is being stored in RT. But all the wage types of infotype 0014 and 0015 are correctly being considered in the payroll. Plz help
Regards
Tarun

Hi,
Plz see the XVAL log that i am getting while running payroll. Do let me know if you need any other information. I can call you now if you say.
PIT   XVAL P10            Valuate pay elements
    Input
        IT
Table IT
PCRlGr Wage salary type               WC C1 C2 C3 Assign: AltPa CA BT Abs.
Var s. Unit    Rate                      Number       Amount
3      /806 Partial period factor 6   01
                         100,000.00
3      2000 BASIC SALARY-NEW          01
                                                                  8,000.00
3      3000 BUS DEDUCTION-HPL         01
                                                                  1,000.00-
Processing
     /806 Partial period factor 6
/806 Partial period factor 6
Rule   ESGPCR VaKey    Operation
XVAL      3            VWTCL 10
XVAL      3   0        ADDWT *
2000 BASIC SALARY-NEW
2000 BASIC SALARY-NEW
Rule   ESGPCR VaKey    Operation
XVAL      3            VWTCL 10
XVAL      3   1        ELIMI *
XVAL      3   1        RESET RA
XVAL      3   1        RTE= /801
XVAL      3   1        RESET *
XVAL      3   1        MULTI RAA
XVAL      3   1        AMT/KGENAU
XVAL      3   1        ZERO= R
XVAL      3   1        ADDWT *
3000 BUS DEDUCTION-HPL
3000 BUS DEDUCTION-HPL
Rule   ESGPCR VaKey    Operation
XVAL      3            VWTCL 10
XVAL      3   0        ADDWT *
Output
IT
Table IT
PCRlGr Wage salary type               WC C1 C2 C3 Assign: AltPa CA BT Abs.
Var s. Unit    Rate                      Number       Amount
3      /806 Partial period factor 6   01
                          100,000.00
3      3000 BUS DEDUCTION-HPL         01
                                                                   1,000.00-

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

With hoding Tax type is not defined while running he TDS inconsistency

Dear Experts
While running the TDS inconsistency program (RFWT0010) for a vendor group ranging from 1 to zzzzzzzzzzz in company code , I am getting an error that "Withholding tax type is not defined".
Can anybody please help me how to solve this issue.
Thanks in advance.
Points will be awraded.
Regards.
skpatra

Hello Surendra,
For TDS calculation WHT Code and Type are plays a major role in TDS.
In your case, you are not defined wht type in your system without this how system calculates tds. So, you should create type and code and assigned the same to concerned vendor master. For wht type path is
Spro>FA>****>wht>ewht>calculation>wht type for paymentj and inovice posting
If you want to more on this pl feel free to ask us
Thanks
Para

Dump while running MRP: MD03:   PERFORM_CONFLICT_TAB_TYPE CX_SY_DYN_CALL_IL

Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors         PERFORM_CONFLICT_TAB_TYPE
Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE
       Occurred on     28.02.2008 at   12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
      The following hierarchy shows the compatibility rules:
ANY_TABLE
                    INDEX_TABLE   HASHED_TABLE
            STANDARD_TABLE    SORTED_TABLE
A concrete access type is only compatible with types higher
      in the hierarchy. For example, STANDARD_TABLE is compatible
      with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
      NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors         PERFORM_CONFLICT_TAB_TYPE
Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE
       Occurred on     28.02.2008 at   12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
      The following hierarchy shows the compatibility rules:
ANY_TABLE
                    INDEX_TABLE   HASHED_TABLE
            STANDARD_TABLE    SORTED_TABLE
A concrete access type is only compatible with types higher
      in the hierarchy. For example, STANDARD_TABLE is compatible
      with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
      NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

On Order Stock not considering while Replenishment planning in IS-Retail

Hi SAP Gurus,
I am running Replenishment planning in IS -Retail system, but it's not considering On order Stock (e.g Purchase order - schedule receipts). could you please tell me the config where system can consider on order stock.
Thanks in Advance.
Sagar.

Hi Mayank,
I had already done the steps that you have mentioned. i.e. Changing the error processed records to
"Not Processed" and running the initial load again, but it does not help as the exception still continue to be the same i.e. No Product or Location can be found in the database" whereas these details are already present in the system i.e.if you check /FRE/MASS_LOC or for product.
After checking the help (F1) for TEMPRPFROM, it clearly specifies that if a date is mentioned in the field, it will activate the blocking on the date and if no value is present in the field, then the temporary blocking will not be enabled.
Also, a surprising fact is that whenevr I transfer the product or location details on a particular date, the TEMPRPFROM reflects that particular date even in the interface tables. So wondering whether some customizing field is present in IS-Retail side which is causing this issue
Best regards
Prashant Kedare

Timer not expired while running process

Dear All
I'm using timer to blink the text message in 6i forms.Its working fine.
But the problem is while running process timer not expired.
If there is any solution to expire timer while running process, please let me know
Thanking you

As I understood you want to expire the timer in a specific time.
you can call SET-TIMER with NO_REPEAT Indicates that the timer should not repeat upon expiration, but is to be used once only, until explicitly called again.
You can call it every time that you want

Accounting exchange rate not picking while running result analysisKKA2

Hi All,
WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
We compared all configurations for this RA key with existed RA key .All the setting are one and the same.in OKG2,OKG3,OKG4,OKG5
PLease help ...
Regards,
Mohan

Hi srikanth,
It is not daily exchange rate.
Actually we copied PS LCR RA key to PS IAS.
PS LCR is working fine and it is picking correctly for the respective months.
Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
Regards,
Mohan

While running MRP

Hi guru's,
Is it possible...to create the Purchase Order automatically while running the MRP..if so how...
Thanks in Advance....

Hi
If u have created PR after MRP run these can be converted to Automaticaly to PO but need to maintain following settings
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.
4) Maintain Purchase Info Record.
5) Create a Purchase Requisition.
6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
( To convert pr in PO PR must be assigned with source )
Vishal...

BADI for adding subcontract quantity while running MRP

Dear All,
Here we have developed a BADI which will collect subcontract data and add to the stock and show in MD04 Transaction.
For this in development server we had developed BADI It is working fine in development server. But same thing we have ported into production server ,BADI
also in activation mode in production server but still it is not working ..
please help me to solve this.
Reards,
Kumar.

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

PR not generating after running MRP

Hi Gurus,
System generate PR after MRP run where in material MRP Type is maintained as PD, but system doesn't create PR for those material which have MRP Type = VM. If I change the MRP Type to PD & then run the MRP, even then system doesn't create PR for that msterials.
My system most of the materials got MRP Type VM, suggest me the solution for this issue.
Regards,
Shantanu

1.MRP Type -VM , Lot Size -EX
2.Procurement Type -E for FG and F for ROH
3.Planning Startegy -10 or 40 in FG/SFG and 20 for componenet
4.Planned Delivery Time in MRP2 VIEW
Configuration : InSPRO -MRP -Check MRP Type -VM-check the details like Re-Orde point .Safety Stock both the automatic calcvualtion box are marked .
Finally as a sample test , select any material -mm02-execute forecast in mm02-forecasting view -exectute forecast -then save .Run MRP in MD03-1,1,3,3,1.NETCH indicator and check the result in MD04.

Plannned Delivery time not considered while calculating delivery date

Hi PP Gurus,
We have a situation is that after MRP run system is not taking into account planned delivery time while calculating delivery dates in schedule lines
It is taking into account GR processing time.We have GR processing time of 3 days.requirment date is 13.10.2011 & delivery date created by the system is 10.10.2011.
We have maintained correct master data i.e.Materail Master , Info record & Scheduling agreement.
Please advice why it is happening & what is the significance of planned delivery time in externaly procured materail with scheduling agrement schedule lines?
Thanks & Regards,
Sandesh

Hi Sandesh,
Is this happening for particular materials or for all materials
Couple of checks -
1) Check with material master changes, might be after MRP run PDT is updated in material master etc ..
2) Check in OPPQ, for option external procurement , whether scheduling info records/agree is marked or not
Best Regards
K.Madhu Kumar

Re: STOC . not considered while running MRP

Similar Messages

Maybe you are looking for