Re: System security 2009 automatically installed

http://nonbaohiem.asia/content/mubaohiem.html
In my laptop virus alert wallpaper is displaying and System security 2009 automatically installed.
System security 2009 showing that my laptop is infected with virus it ask me to scan after scan it showing many viruses.
When i try to clean all virus it ask me to activate the system security 2009.
I am using Mcafee virus scan it has catched some Fake Trojan virus.
Now macfee also infected. On access scan has been disabled automatically.

Hi
Im using Avira antivirus software.
This software is for free and great
I think you should remove the Mcaffe from the system.
Then install the Avira antivirus software and update it to latest date
Then perform an full system scan which should help to remove the viruses, Trojans and other garbage from the system.
Greets

Similar Messages

Security Update automatically installed?

My "Update" reminder on my Mac (OS 10.9.5) just stated that a Security Update had been installed on my computer. I did not do this manually.
I then went to the Apple pull-down for Software Update. It said that the last security update was installed on November 28, 2014, which is consistent with the log that I keep concerning my computer.
What is going on? Should I be worried? (I changed my Apple ID password shortly before this message appeared).

If the Security update is installed, you may find it under installations,
Click  in the menu bar.
About This Mac > More Info.. > System Report > Software > Installations

Lightspeed Systems Security Agent

Has anyone tried to use CS4 while a Lightspeed Systems Security Agent is installed on their computer?
Still experiencing problems with freeze ups and other computer hardware problems and I'm convinced the school's security is at least part of the problem.
Resource issues are also a likely culprit.
2g RAM
50g on one network drive for storage
and maybe 25g for storage on the computer's C drive.
Thoughts, suggestions, reasons not to throw the computer under my SUV?

OK. Forgive me for not including more....and I sincerely hope this isn't information overload...but I thought the more info the better….
Some Background…
We have 8 Computer/Editors each with CS4.
We use one particular computer for the CS4 for daily morning announcements, it’s used for only that during only one class period a day.
We import directly from the camcorder (Panasonic PV-GS200) on a Firewire to the computer (tapeless) and then edit on CS4.
We then export the finished video timeline to a ½” tape to be played on our Channel One system (school wide)
Although, the computer has 3 IEEE ports, we have to disconnect the Firewire from the camcorder and plug it into the VCR b/c otherwise the computer won’t “see” both the camcorder and the VCR if they are both plugged in..(sometimes it never sees the VCR at all- more on that later)
We occasionally have to move files from editor to editor. Which is done i.e. by exporting media from Computer A to an Iomega external hard drive then move the file from the Iomega to Computer B)
The computers are Dells – purchased new last year – 2g RAM.
The have local profiles (b/c apparently CS4 will not work with a roaming profile)
On each computer we have access to a network drive (E:) that has 50g of storage space. On the E drive we have created and Assets folder that holds a one folder for Audio, one for Video, one for Graphics, and one for Projects. On the E drive, we also created a "Projects" folder, and one for "Scratch Disk".
When each student logs in he/she has access to an H drive - which has very limited space (not sure exactly how much.) It apparently is where Adobe automatically put the file folders "Adobe Media Encoder" (>"4.0" folder >Plug in loading log) a "Premier Pro" folder (w/a "4.0" folder w/"Archived Layouts", "Layouts", "Styles" folders) and a "Resource Central" folder (w/ "4.0" folder w/ ResourceCentral.db)
If the students are logged in under their settings – they can’t “right click” anything and can’t call up the Task Manager. Because of problems, I generally log in under my settings so I can at least get to the Task Manager.
When we open a new project...we go to settings - and under Scratch Disks tab>
Captured Video = Video Folder on E drive,
Captured Audio = Audio folder on E drive,
Video & Audio Previews is set to Scratch Disk folder on E drive.
Under projects location we set it to Projects folder on the E drive.
****However, every time we try to create a project we get a warning that says
"The Scratch Disks are write protected or unavailable. To open this project, the scratch disks will be set to your My Documents folder. Would you like to continue?"
We hit ok and go on….
The problems vary from one end of the spectrum to the other……nothing seems to be a constant factor.
Often the software freezes, cursor will move, but nothing else – there does NOT seem to be any specific thing being done on the software that sets it off.
Many times the computer will not see the camcorder when IEEE is plugged into it.
The computer will also freeze up when open the drives to move asset files from the external drive to the Networks E drive.
After recording the announcement into the computer and editing it….we often have a very difficult time getting the computer to recognize the VCR. We’ve tried different cables, different IEEE ports, even different VCRs, restarted the computer, turned the VCR off and on…..no luck.
Many times when we can not get the computer to respond, or even the Task Manager to shut down the computer, we do a hard shutdown. When we do we often get the warning window - “tfswctrl.exe not responding, click to end program”
I’m by no means a computer genius but it sounds like to me (and at least one person in our technology department) that we don’t have enough of RAM, HDD space, or both.
The fact that our files are spread out on 2 network drives and the computer's C drive, does not sound like a good thing to me - but maybe it should still work.
If it helps I can list other programs loaded on the computer, but generally we try not to open anything else while working on the announcements.
Any questions, answers, suggestions, “Hey stupid, this is what’s wrong” statements are all welcome!
Thanks for any and all help.

'System Security' Malware help, please! Installed Verizon security suite, now it's back again.

We received the System Security malware on our computer. We thought we removed it completely because initially the malware prevented the Verizon security suite from running.
After we deleted the virus and the program attached, we were able to install the Verizon Internet Security suite. Lo and behold, two hours later (after a successful complete scan) the malware was back with NO warning from Verizon Security Suite.
Can someone please tell me how to remove this malicious program and also why the security suite gave no warning before it re-attached itself to our computer?
Any help is greatly appreciated, as our laptop is heavily used and we do not have the money or the time to have it completely wiped clean.
Thank you!!

its really dependant on what type of malware is installed.
if u can get the exact name of it ... it should be something like name.malware .. something like that
do a google for "remove name.malware " or whatever the name of it is, and chances are the first 3 responses will be how to remove it
keep in mind that ABSOLUTELY NO VIRUS PROTECTION ON EARTH EVER , can protect you from every single virus/malware ... things change too fast for everythign to keep up 100% of the time
... and by the way, i like turtles

Can't access safe mode to delete System Security fake anti virus virus. HELP.

Hi, our SL500 has become infected with "System Security" fake anti virus software. We have tracked down how to remove it.
http://www.geekstogo.com/forum/system-security-malware-t222291.html
However when we get to the "reboot your computer in safe mode" (see instructions below) we can't as this is not possible.
We have tried F8...........Repeatedly . And also Run->msconfig->BOOT.INI->/SAFEBOOT . But to no avail . Actually we get a pop up stating that Windows can not find said command and have we typed it in correctly . Please could some one help us as this is driving us insane . One last thing . A computer WITHOUT a "safe mode " option, isn't that kinda of unsafe and a tad.....
Thanks in advance.
Instructions for malware removal.
You will need to print out a copy of these instructions, or save them to NotePad and put a shortcut to the file on the desktop so that you can refer to while you complete this procedure as you will be required to boot into Safe Mode where you wont have internet access.
Please download ATF Cleaner by Atribune.
Caution: This program is for Windows 2000, XP and Vista only
Double-click ATF-Cleaner.exe to run the program.
Under Main choose: Select All
Click the Empty Selected button.
If you use Firefox browser
Click Firefox at the top and choose: Select All
Click the Empty Selected button.
NOTE: If you would like to keep your saved passwords, please click No at the prompt.
If you use Opera browser
Click Opera at the top and choose: Select All
Click the Empty Selected button.
NOTE: If you would like to keep your saved passwords, please click No at the prompt.
Click Exit on the Main menu to close the program.
Run MBAM again, only this time perform a full scan and post the log.
Please click here to download AVP Tool by Kaspersky.
Save it to your desktop.
Reboot your computer into SafeMode.
You can do this by restarting your computer and continually tapping the F8 key until a menu appears.
Use your up arrow key to highlight SafeMode then hit enter.
Double click the setup file to run it.
Click Next to continue.
It will by default install it to your desktop folder.Click Next.
Hit ok at the prompt for scanning in Safe Mode.
It will then open a box There will be a tab that says Automatic scan.
Under Automatic scan make sure these are checked.
System Memory
Startup Objects
Disk Boot Sectors.
My Computer.
Also any other drives (Removable that you may have)
After that click on Security level then choose Customize then click on the tab that says Heuristic Analyzer then choose Enable Deep rootkit search then choose ok.
Then choose OK again then you are back to the main screen.
Then click on Scan at the to right hand Corner.
It will automatically Neutralize any objects found.
If some objects are left un-neutralized then click the button that says Neutralize all
If it says it cannot be Neutralized then chooose The delete option when prompted.
After that is done click on the reports button at the bottom and save it to file name it Kas.
Save it somewhere convenient like your desktop and just post only the detected Virus\malware in the report it will be at the very top under Detected post those results in your next reply.
Note: This tool will self uninstall when you close it so please save the log before closing it.
In your next reply I would like to see:
C:\RSIT\info.txt
MBAM log
Kaspersky AVP scan results
Also let me know how the computer is behaving.
This post has been edited by Octagonal: Dec 27 2008, 08:08 AM

Thanks for trying to help. Sadly, I followed the instructions and it rebooted to the blue screen again.
It's going to have to go to Apple for repairs now. I'm out of options.
I am wondering how much easier it would have been if I'd created a time machine restore point. I got what I deserved for failing to do that, but I'm doubtful even that would have worked in this case. It does seem to be because of that piece of widely reported malware that didn't want to leave without causing damage.
The most frustrating aspect is the safe boot. I get to the desktop but without any menu, finder or dock. It seems to be similar to the problem below...
http://www.macsmarts.com/?p=109
But that's for Tiger. I tried that to no effect.
Like I said, it's going to have to go to Apple now because I've done so many things I don't know if I'm just digging myself a deeper hole.
Thanks again for offering help.

Kaspersky Internet Security 2009!

I am on 076876A ( almost two-years n five-months )...Incidentally had to 'Rescue and Recovery' the Windows XP sp2 OS from hidden partition by pressing Lenovo Care button!...Deleted the demo-Norton Internet Security 2005 ( antispyware edition ) using Norton Removal Tool...
Tried Installing and Activating Kaspersky Internet Security 2009 thrice!...but somehow failed each-time...Upon re-booting the system once the said Installation was over, the message displayed on the top right of the Windows welcome screen - Protected by Kasperky, disappears each time...
The 'K' icon on the notification area gets blacked-out ( once even after updating the virus signatures and subsequent reboot ) followed by the Windows Warning that the system wasn't protected by the said anti-virus software...
Are there non-compatibility issues with 076876A's Windows XP sp2 OS that cause Kasperky Internet Security 2009 to be disabled during Installation and Online-Activation?...( Incidentally Kaspersky lets just 3 attempts to activate the said software...I have exhausted the limit without even exercising my paid-rights to run the OS protected by KIS 2009! )...
Do advise!...Thanking You in advance!
Guide me to replace the pre-installed windows xp home key with the Product Key at the bottom of my Lenovo Notebook's Cabinet!
Message Edited by adultam on 01-23-2009 10:37 PM
Message Edited by adultam on 01-23-2009 10:41 PM
Message Edited by adultam on 02-03-2009 06:41 PM

Installed and activated ( online ) kis 8.0.0.506en...
Awaiting guidance from community to change pre-installed windows product key to the ONE provided at the bottom of MY notebook's case, facilitating windows product activation!

T5120 Jumpstart: unable to update system firmware for automatic reboot

Hi,
i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
Installing boot information
        - Installing boot blocks (c0t0d0s0)
        - Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting
WARNING: CHANGE DEFAULT BOOT DEVICE
         If you want the system to always reboot Solaris from
         the boot device that you've specificed (c0t0d0s0),
         you must change the system's default boot device using
         the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
{0} ok printenv
Variable Name           Value                          Default Value
ttya-rts-dtr-off           false                          false
ttya-ignore-cd           true                           true
keyboard-layout
reboot-command
security-mode           none                           No default
security-password                                      No default
security-#badlogins   0                              No default
verbosity                   min                            min
pci-mem64?              true                           true
diag-switch?              false                          false
local-mac-address?   true                           true
fcode-debug?            false                          false
scsi-initiator-id           7                              7
oem-logo                                                 No default
oem-logo?                 false                          false
oem-banner                                             No default
oem-banner?             false                          false
ansi-terminal?            true                           true
screen-#columns       80                             80
screen-#rows            34                             34
ttya-mode                 9600,8,n,1,-                   9600,8,n,1,-
output-device           virtual-console                virtual-console
input-device              virtual-console                virtual-console
auto-boot-on-error? false                          false
load-base                 16384                          16384
auto-boot?                 true                           true
network-boot-arguments
boot-command          boot                           boot
boot-file
boot-device               disk                           disk net
multipath-boot?         false                          false
boot-device-index      0                              0
use-nvramrc?            false                          false
nvramrc
error-reset-recovery    boot                           bootDoes anybody have any ideas what the problem could be?
I browsed several boards and a huge set of websites but did find anything related.

At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot.

"a new security update was installed on your Mac"

I was using my Macbook Pro this morning, and the update bar came up on the right top screen, so I said "remind me tomorrow".
Less than a minute later, a box popped up in the same place which says "Security Update Installed A new security update was installed on your Mac"
I am submitting the question because I haven't had this message before, nor did I authorize an update this morning.
Is this malware or a new service in OS X Yosemite 10.10.1?
Also, when I tried logging into the apple forums using my keycode and password, it said my account is locked for security reasons. I logged in the old fashioned way, typing my information and got in.
Thank you!

It is possible that the recent security update was installed automatically.
You can verify it. If the info is as shown below, there is nothing to worry.
Click  in the menu bar.
About This Mac > More Info.. > System Report > Software > Installations
Best.

SAP system doesn't automatically start after restart (but manual start ok)

Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinn

hi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun

After upgrading to Firefox 36.0.4, it automatically installed noscript

After upgrading to Firefox 36.0.4, it removes all my existing add-on extension.
In addition, "noscript" was automatically installed and there is no way to remove it.
The "noscript" add-on does not show up in any of the add-on extension for me to disable/remove it.
I even tried adding noscript from the add-on so that the noscript add-on shows up in the
firefox extension page so that I could remove it but that does not remove the
original noscript that comes with Firefox 36.0.4
Hopefully there is a way for user to remove this and it is not part of Firefox 36.0.4.
At least allow user the options of using it or remove it.

''cor-el [[#answer-710716|said]]''
<blockquote>
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
</blockquote>
Thanks Cor-el. This works.

Calling web service from SQL 2008 error: System.Security.HostProtectionException: Attempted to perform an operation that was forbidden by the CLR host.

Hi,
Im trying to use web service in c# sql database project. when running stored procedure, in which the web service should be called, im getting this error:
System.TypeInitializationException: The type initializer for 'System.ServiceModel.ClientBase`1' threw an exception. ---> System.Security.HostProtectionException: Attempted to perform an operation that was forbidden by the CLR host.
at System.ServiceModel.DiagnosticUtility.GetUtility()
at System.ServiceModel.DiagnosticUtility.get_Utility()
at System.ServiceModel.ClientBase`1..cctor()
The protected resources (only available with full trust) were:
All
The demanded resources were:
Synchronization, ExternalThreading
--- End of inner exception stack trace ---
at System.ServiceModel.ClientBase`1.InitializeChannelFactoryRef()
at System.ServiceModel.ClientBase`1..ctor()
at UMGClient..ctor()
at UMG_StoredProcedures.spUMG_ProcessEmail(SqlInt64 cid_request)
Here is the code:
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using CredexDB.Workflow;
using System.Collections.Generic;
using CredexDB.umgwcftest;
public partial class UMG_StoredProcedures
/// <summary>
/// </summary>
/// <param name="bankDate"></param>
/// <param name="stateCategory"></param>
[Microsoft.SqlServer.Server.SqlProcedure]
public static void spUMG_ProcessEmail( SqlInt64 cid_request )
SqlConnection conn = new SqlConnection("Context Connection=true;");
conn.Open();
try
SqlContext.Pipe.Send("A");
UMGClient umgcl = new UMGClient();
SqlContext.Pipe.Send("B");
UMGwcf.SoapExchangeMailMessage email = new UMGwcf.SoapExchangeMailMessage();
string[] names = new string[1];
names[0] = "[email protected]";
email.To = names;
email.Subject = "Test UmgWcf";
email.MessageBody = "Testovacia správa - ľľššččťťťýéáí";
email.From = "[email protected]";
email.Priority = 20;
email.Sender = 1;
email.DoNotArchive = false;
email.EncryptAndSign = false;
//long ret = umgcl.SendMailMessage(email);
catch (Exception e)
SqlContext.Pipe.Send("C");
SqlContext.Pipe.Send(e.ToString());
finally
SqlContext.Pipe.Send("D");
conn.Close();
private static void execSql(string sql, SqlConnection conn)
new SqlCommand(sql, conn).ExecuteNonQuery();
The error occurs at this row:
UMGClient umgcl = new UMGClient();
Here is the UMG class:
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
[System.ServiceModel.ServiceContractAttribute(Namespace="vub.sk/UMGwcf", ConfigurationName="IUMG")]
public interface IUMG
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/SendMailMessage", ReplyAction="vub.sk/UMGwcf/IUMG/SendMailMessageResponse")]
long SendMailMessage(UMGwcf.SoapExchangeMailMessage message);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/ResendEmailMessage", ReplyAction="vub.sk/UMGwcf/IUMG/ResendEmailMessageResponse")]
long ResendEmailMessage(long emailid);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/GetEmailById", ReplyAction="vub.sk/UMGwcf/IUMG/GetEmailByIdResponse")]
UMGwcf.SoapDeliveredMailMessage GetEmailById(long emailid);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/SendSMSMessage", ReplyAction="vub.sk/UMGwcf/IUMG/SendSMSMessageResponse")]
long SendSMSMessage(UMGwcf.SoapSMSMessage smsmessage);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/GetSMSById", ReplyAction="vub.sk/UMGwcf/IUMG/GetSMSByIdResponse")]
UMGwcf.SoapDeliveredSMSMessage GetSMSById(long smsid);
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
public interface IUMGChannel : IUMG, System.ServiceModel.IClientChannel
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
public partial class UMGClient : System.ServiceModel.ClientBase<IUMG>, IUMG
public UMGClient()
public UMGClient(string endpointConfigurationName) :
base(endpointConfigurationName)
public UMGClient(string endpointConfigurationName, string remoteAddress) :
base(endpointConfigurationName, remoteAddress)
public UMGClient(string endpointConfigurationName, System.ServiceModel.EndpointAddress remoteAddress) :
base(endpointConfigurationName, remoteAddress)
public UMGClient(System.ServiceModel.Channels.Binding binding, System.ServiceModel.EndpointAddress remoteAddress) :
base(binding, remoteAddress)
public long SendMailMessage(UMGwcf.SoapExchangeMailMessage message)
return base.Channel.SendMailMessage(message);
public long ResendEmailMessage(long emailid)
return base.Channel.ResendEmailMessage(emailid);
public UMGwcf.SoapDeliveredMailMessage GetEmailById(long emailid)
return base.Channel.GetEmailById(emailid);
public long SendSMSMessage(UMGwcf.SoapSMSMessage smsmessage)
return base.Channel.SendSMSMessage(smsmessage);
public UMGwcf.SoapDeliveredSMSMessage GetSMSById(long smsid)
return base.Channel.GetSMSById(smsid);
the CLR where created as follows:
ALTER DATABASE XXXX SET TRUSTWORTHY ON;
CREATE ASSEMBLY [System.ServiceModel]
FROM 'C:\ttrojcak\System.Runtime.Serialization.dll'
WITH PERMISSION_SET = UNSAFE
CREATE ASSEMBLY [System.ServiceModel]
FROM 'C:\ttrojcak\System.ServiceModel.dll'
WITH PERMISSION_SET = UNSAFE
the message window shows warnings:
Warning: The Microsoft .NET Framework assembly 'system.servicemodel, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.directoryservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.directoryservices.protocols, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.drawing.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.web.regularexpressions, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.serviceprocess, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.configuration.install, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.identitymodel, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.messaging, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.identitymodel.selectors, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'microsoft.transactions.bridge, version=3.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
creating store procedure:
EXEC sp_executesql N'
CREATE PROCEDURE [spUMG_ProcessEmail]
@cid_request bigint
AS
EXTERNAL NAME [CredexDB].[UMG_StoredProcedures].[spUMG_ProcessEmail]'
IF (@@ERROR = 0)
BEGIN
DECLARE @procSchema sysname
DECLARE @procName sysname
SELECT @procSchema = SCHEMA_NAME(schema_id), @procName = name
FROM sys.objects
WHERE object_id = OBJECT_ID(N'[spUMG_ProcessEmail]')
EXEC sp_addextendedproperty 'AutoDeployed', N'yes',
'SCHEMA', @procSchema,
'PROCEDURE', @procName
EXEC sp_addextendedproperty 'SqlAssemblyFile', N'UMG\UMG.cs',
'SCHEMA', @procSchema,
'PROCEDURE', @procName
EXEC sp_addextendedproperty 'SqlAssemblyFileLine', 95,
'SCHEMA', @procSchema,
'PROCEDURE', @procName
END
Any tips?
Thank you

and this moves me to another problem. the stored procedure spUMG_ProcessEmail is unable to find and read app.config
stored procedure is unable to read app.config. it is necesary to rewrite the xml config into c# code:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IUMG" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536"
messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="None">
<transport clientCredentialType="None" proxyCredentialType="None"
realm="" />
<message clientCredentialType="UserName" algorithmSuite="Default" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://umgwcftest/UMGwcf.svc" binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_IUMG" contract="IUMG"
name="BasicHttpBinding_IUMG" />
</client>
</system.serviceModel>
</configuration>
and the rewrited code:
BasicHttpBinding myBinding = new BasicHttpBinding();
myBinding.Name = "BasicHttpBinding_IUMG";
myBinding.CloseTimeout = new TimeSpan(00, 01, 00);
myBinding.OpenTimeout = new TimeSpan(00, 01, 00);
myBinding.ReceiveTimeout = new TimeSpan(00, 10, 00);
myBinding.CloseTimeout = new TimeSpan(00, 01, 00);
myBinding.AllowCookies = false;
myBinding.BypassProxyOnLocal = false;
myBinding.HostNameComparisonMode = HostNameComparisonMode.StrongWildcard;
myBinding.MaxBufferSize = 65536;
myBinding.MaxBufferPoolSize = 524288;
myBinding.MaxReceivedMessageSize = 65536;
myBinding.MessageEncoding = WSMessageEncoding.Text;
myBinding.TextEncoding = System.Text.Encoding.UTF8;
myBinding.TransferMode = TransferMode.Buffered;
myBinding.UseDefaultWebProxy = true;
myBinding.ReaderQuotas.MaxDepth = 32;
myBinding.ReaderQuotas.MaxStringContentLength = 8192;
myBinding.ReaderQuotas.MaxArrayLength = 16384;
myBinding.ReaderQuotas.MaxBytesPerRead = 4096;
myBinding.ReaderQuotas.MaxNameTableCharCount = 16384;
myBinding.Security.Mode = BasicHttpSecurityMode.None;
myBinding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
myBinding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None;
myBinding.Security.Transport.Realm = "";
myBinding.Security.Message.ClientCredentialType = BasicHttpMessageCredentialType.UserName;
myBinding.Security.Message.AlgorithmSuite = System.ServiceModel.Security.SecurityAlgorithmSuite.Default;
EndpointAddress endPointAddress = new EndpointAddress(new Uri("http://umgwcftest/UMGwcf.svc"));
SqlContext.Pipe.Send("2");
UMGClient umgcl = new UMGClient(myBinding, endPointAddress);
after that, I got another error and it's solution is here:
error and solution
So I got it finaly working

System Update 3.14 install fails on action: SetVendorValue

Hi, folks:
I'm attempting to install System Update 3.14 for the first time on a 2004-vintage ThinkPad T42 type 2379-DXU. The immediate failure appears to be that the action "SetVendorValue" fails. I'm not sure what the underlying cause is. The installation terminates with an alert that installation failed and the system is unchanged; but in fact the System Update application is installed and there's an icon in my Start menu. When I try to run System Update, it displays an error message in front of the splash screen and quits.
Details and log excerpts below. Can anyone figure out why the install is failing? How can I get the install to succeed and the System Update app to run successfully? Thanks in advance for any ideas.
In the meantime, I'm going to try downloading individual drivers manually, to solve my underlying problem. But I'd sure like to have System Update on my side in the future.
--Jim DeLaHunt, Vancouver, Canada
Details* run the installer "systemupdate314-2008-5-15.exe".
* installation proceeds through several steps. Shortly after the "Writing vendor value" status message appears, the installation fails with an error alert saying that that installer cannot complete and the system is unchanged.
* in fact, there is now a c:\Program Files\Lenovo\System Update\ folder, and a System Update icon under Start menu -> All Programs -> ThinkVantage -> System Update.
* clicking the System Update icon in the start menu causes the program to launch and fail. The splash screen appears, then an alert "System Update could not start properly [OK]". Clicking [OK] causes the program to exit.
Log exceprts:
The apparently relevant bit of the install log C:\Documents and Settings\<user>\Local Settings\Temp\tvsuSetup.log reads,
.... [front 90% of log omitted] ...
Action 22:35:32: reloadsched.exe. reloadsched.exe
MSI (s) (14:B8) [22:35:32:402]: Executing op: CustomActionSchedule(Action=reloadsched.exe,ActionType=1122,,Target=C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe,)
MSI (s) (14:B8) [22:35:32:432]: Note: 1: 1721 2: reloadsched.exe 3: 4: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
Info 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: reloadsched.exe, location: , command: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
MSI (s) (14:B8) [22:35:32:432]: Executing op: ActionStart(Name=InstallFinalize,,)
Action 22:35:32: InstallFinalize.
MSI (s) (14:B8) [22:35:32:432]: Executing op: CleanupTempFiles(TempFiles=C:\WINDOWS\Installer\11f23a.mst)
MSI (s) (14:B8) [22:35:32:432]: Scheduling file 'C:\WINDOWS\Installer\11f23a.mst' for deletion during post-install cleanup (not post-reboot).
MSI (s) (14:B8) [22:35:32:432]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=43819590)
MSI (s) (14:B8) [22:35:32:682]: User policy value 'DisableRollback' is 0
MSI (s) (14:B8) [22:35:32:682]: Machine policy value 'DisableRollback' is 0
Action 22:35:32: RollbackCleanup. Removing backup files
RollbackCleanup: File: C:\Config.Msi\11f23e.rbf
MSI (s) (14:B8) [22:35:32:702]: Calling SRSetRestorePoint API. dwRestorePtType: 0, dwEventType: 103, llSequenceNumber: 402, szDescription: "".
MSI (s) (14:B8) [22:35:32:702]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
MSI (s) (14:B8) [22:35:32:702]: Unlocking Server
MSI (s) (14:B8) [22:35:32:702]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
Action ended 22:35:32: InstallFinalize. Return value 1.
MSI (s) (14:B8) [22:35:32:702]: Doing action: SetVendorValue
Action 22:35:32: SetVendorValue. SetVendorValue
Action start 22:35:32: SetVendorValue.
MSI (s) (14:34) [22:35:32:713]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI25.tmp, Entrypoint: SetVendorValue
6/29/2008 22:35:32 DualSkins set to 0
6/29/2008 22:35:32 szValue set to THINK
6/29/2008 22:35:32 Unable to set key value: Vendor
Action ended 22:35:32: SetVendorValue. Return value 3.
Action ended 22:35:32: INSTALL. Return value 3.
... [snip]...
MSI (s) (14:B8) [22:35:32:953]: Attempting to delete file C:\WINDOWS\Installer\11f23a.mst
MSI (s) (14:B8) [22:35:32:953]: Unable to delete the file. LastError = 32
MSI (s) (14:B8) [22:35:32:963]: MainEngineThread is returning 1603
MSI (s) (14:04) [22:35:32:963]: Destroying RemoteAPI object.
MSI (s) (14:68) [22:35:32:963]: Custom Action Manager thread ending.
MSI (c) (E8:10) [22:35:32:973]: Back from server. Return value: 1603
MSI (c) (E8:10) [22:35:32:973]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E8:10) [22:35:32:973]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
Action ended 22:35:32: ExecuteAction. Return value 3.
MSI (c) (E8:10) [22:35:32:973]: Doing action: SetupCompleteError
Action 22:35:32: SetupCompleteError.
Action start 22:35:32: SetupCompleteError.
Action 22:35:32: SetupCompleteError. Dialog created
MSI (c) (E8:18) [22:35:40:544]: Doing action: ISSetupFilesCleanup
Action 22:35:40: ISSetupFilesCleanup.
Action start 22:35:40: ISSetupFilesCleanup.
MSI (c) (E8:AC) [22:35:40:544]: Invoking remote custom action. DLL: C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\MSI26.tmp, Entrypoint: SFCleanupEx
Action ended 22:35:40: ISSetupFilesCleanup. Return value 1.
Action ended 22:35:40: SetupCompleteError. Return value 2.
Action ended 22:35:40: INSTALL. Return value 3.
... [snip] ....
=== Logging stopped: 6/29/2008 22:35:41 ===
MSI (c) (E8:10) [22:35:41:175]: Note: 1: 1708
MSI (c) (E8:10) [22:35:41:175]: Product: System Update -- Installation operation failed.
MSI (c) (E8:10) [22:35:41:195]: Attempting to delete file C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\11ce5a.mst
MSI (c) (E8:10) [22:35:41:195]: Unable to delete the file. LastError = 32
MSI (c) (E8:10) [22:35:41:195]: Grabbed execution mutex.
MSI (c) (E8:10) [22:35:41:195]: Cleaning up uninstalled install packages, if any exist
MSI (c) (E8:10) [22:35:41:205]: MainEngineThread is returning 1603
=== Verbose logging stopped: 6/29/2008 22:35:41 ===
The log from the failed startup of TVSU at
C:\Program Files\Lenovo\System Update\logs\tvsu_log_080629230655.txt
reads:
[ThinkVantage System Update build: 2008-5-15 3.14.0008] 6/29/2008 11:06:55 PM
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update\Preferences\UCSettings\RunTime' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.GUIManager.StartGUI()
Message: Exception not expected was received.System.NullReferenceException: Object reference not set to an instance of an object.
at Tvsu.Environment.EnvironmentManager..ctor()
at Tvsu.Environment.EnvironmentManager.get_Instance()
at Tvsu.Gui.GUIManager.InitializeGUI()
at Tvsu.Gui.GUIManager.StartGUI()
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Message: No Nls object was found, using hardcoded 'OK'
Exception:
Message: Object reference not set to an instance of an object.
Type: System.NullReferenceException
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Info 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage(String message, String title, String mastheadtext, MessageType t, Boolean check)
Message: Showing ERROR Message: < System Update could not start properly. >
[End of details]

Well, the problem is solved, and System Update is installed and working.
The root cause of the problem appeared to be that the registry directory HKEY_LOCAL_MACHINE\SOFTWARE no longer extended "full control" permission to the Administrators user group on my machine. We fixed this by using regedit:
Start... Run... regedit....
select directory HKEY_LOCAL_MACHINE\SOFTWARE, right-click, Permissions...,
press Add... button
enter SYSNAME\Administrators in the text area (SYSNAME is a placeholder for my actual machine name)
OK... OK...
Quit regedit
We diagnosed the problem with the help of IT support from our employer. The problem was blocking installation of new anti-virus software. We had just removed old anti-virus and "internet security" software. Hmm, I wonder if the old security software removed this permission setting as a parting gift.
Hope this is helpful for others who encounter the same symptoms.

Can I maually check for updates but prevent them from being automatically installed if it turns out one is available?

Can I maually check for updates but prevent them from being automatically installed if it turns out one is available?
Background:
In options I have "check for updates, but let me choose whether to install them" ticked. This works fine, in that I periodically receive a notice of an available update, and it will ask me whether I want to I want to install it.
But there are certain times -- for reasons I won't go into here (unless requested as part of seeking a solution) -- where I want to manually check for new versions, but RETAIN the ability to decide whether or not to install it. But if I click Help/About Firefox/Check for Updates, and it finds an update, it will immediately proceed to install it without asking for permission. While that seems quite inconsistent with my update preferences in Options, it is apparently normal behavior as described in https://support.mozilla.org/en-US/kb/update-firefox-latest-version#w_how-do-i-manually-check-for-updates.
So is there any way I can manually check for new-update availability but then refuse the update if I so choose? Once an unwanted install begins, I'm concerned that if I click cancel I could end up with a partial installation or some "messed up," duplicated or corrupted FF files (e.g., multiple versions appended with (1), (2) etc, similar to what sometimes confusingly happens when I do an XP System Restore).
Thanks.

I think what needs to be made very clear here is that when a user clicks on "check for updates" the software should bloody well CHECK for updates and most certainly SHOULD NOT proceed to download and apply any updates. this is misleading and intrusive.
I just wanted to check if there was an updated version but I DID NOT want to actually update at that moment. the software downloaded data, costing me money and tried to apply the update which could have potentially messed up my settings if I had not checked everything was ok first.
I actually discovered how to prevent the update by searching through windows and manually deleting the files but why should anyone have to go to such lengths?
the software should simply do as it is asked, not do things that have most certainly not been asked.

EPM system security is not initialized properly

Hi,
We are in the process of installing 11.1.2.2 on Windows 2008 server.
Step 1. we installed Foundation Service, Reporting and FM
Step2. 1st did configuration of foundation service and Performance Management Architect
Result - Successful. Was able to login to workspace ans shared service
Step 3. 2nd we Configured Financial Management.
Configuration was successful.
All services are running but we are not able to login into workspace.
We are geting following error in log file of HyS9EPMServer
"EPM system security is not initialized properly"
Any help will be appreciated.
Edited by: user8638468 on Aug 15, 2012 9:42 AM

Yes Vivek.
We did run Foundation Service --> Configure Web Server after configuring HFM module. It was susccessful.
After that we run "Start EPM System". Then everything stopped.
While installing HFM in 2nd leg on "Configure Database" screen we selected "Perform first-time configuration of database".
Entered username HFM.
We noticed that after installation EPMSystemRegistry-jdbc got changed.
Path is C:\Oracle\Middleware\user_projects\domains\EPMSystem\config\jdbc\EPMSystemRegistry-jdbc.xml
<value>HSS</value> got changed to <value>HFM</value>
I are not sure but I think we should have selected "Connect to a previously configured database".
I am going to install it again and will update the forum.
-Devidas

Reader will not automatically install updates on Windows 7

I have looked through the forums and have not seen this exact symptom mentioned:
"Automatically install updates" does not seem to work correctly on Windows 7. The updates download and I see the "update is ready to install" bubble in the system tray repeatedly. However, the updates never seem to install. I've seen this on more than one Windows 7 machine (it works ok on XP). I suppose this could be something particular to our environment, but I'm at a bit of a loss as to where to look next. Leaving the system "idle" does not seem to help and the behavior does persist after a reboot.
(I'm running Process Monitor right now and see AdobeARM.exe occasionally and successfully creating and exiting a thread, but not touching any files or registry entries.)
I enabled this setting via the registry -
[HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe ARM\1.0\ARM]
"iCheck"=dword:00000003
- and can see in the GUI that it has taken effect.
I do see some files in this directory - does this look correct?
C:\Users\All Users\Adobe\Reader\9.3\ARM>dir /s
Volume in drive C has no label.
Volume Serial Number is 8EC5-7A43
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM
07/07/2010 08:00 AM    <DIR>          .
07/07/2010 08:00 AM    <DIR>          ..
07/07/2010 08:00 AM    <DIR>          19872
07/06/2010 08:05 AM    <DIR>          882
06/20/2010 04:01 AM         8,040,960 AdbeRdrUpd933_all_incr.msp
07/07/2010 08:00 AM           368,779 AdobeARM.bin
06/09/2010 04:06 AM           385,536 ARM.msi
06/23/2010 07:45 AM            28,160 Reader9Manifest.msi
               4 File(s)      8,823,435 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\19872
07/07/2010 08:00 AM    <DIR>          .
07/07/2010 08:00 AM    <DIR>          ..
06/09/2010 04:06 AM           331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM           976,832 AdobeARM.exe
06/09/2010 04:06 AM            70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM           331,176 ReaderUpdater.exe
               4 File(s)      1,709,768 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\882
07/06/2010 08:05 AM    <DIR>          .
07/06/2010 08:05 AM    <DIR>          ..
06/09/2010 04:06 AM           331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM           976,832 AdobeARM.exe
06/09/2010 04:06 AM            70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM           331,176 ReaderUpdater.exe
               4 File(s)      1,709,768 bytes
     Total Files Listed:
              12 File(s)     12,242,971 bytes
Any suggestions appreciated. Thanks - Andy

Some additional information. I'm seeing "GetLastError(): 0x2 - The system cannot find the file specified" in c:\users\(me)\appdata\local\temp\AdobeARM.log. But even using Process Monitor, it's not clear to me which file cannot be found.
Still seems to me that updater is downloading the update but never trying to apply it. The most recent thing I have tried is to quit AdobeARM gracefully and restart it. That does seem to have reduced the number of subdirectories in C:\ProgramData\Adobe\Reader\9.3\ARM\ to only one (previously there had been one subdirectory per run).
Thanks for any suggestions -
[2010-07-09 08:08:50] C:\ProgramData\Adobe\Reader\9.3\ARM\
[2010-07-09 08:08:50]    GetLastError(): 0x91 - The directory is not empty.
[2010-07-09 08:08:50] ARM returns ERROR_SUCCESS
[2010-07-09 08:08:50] Adobe ARM 1.1.7.0 logging finished.
[2010-07-09 08:10:38] Adobe ARM 1.1.7.0 logging started.
[2010-07-09 08:10:38] Command Line:
[2010-07-09 08:10:38] GetFileVersion(): C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
[2010-07-09 08:10:38]    File version: 9.3
[2010-07-09 08:10:38]    Build number: 2
[2010-07-09 08:10:38]    Revision number: 163
[2010-07-09 08:10:38] ProductCode: {AC76BA86-7AD7-1033-7B44-A93000000001}
[2010-07-09 08:10:38] ProductName: Adobe Reader 9.3.2
[2010-07-09 08:10:38] ProductVersion: 9.3.2
[2010-07-09 08:10:38] ProductRegistry: SOFTWARE\Adobe\Acrobat Reader\9.0
[2010-07-09 08:10:38] ProductInstallDir: C:\Program Files\Adobe\Reader 9.0\
[2010-07-09 08:10:38] Found preference AUTO_ALL.
[2010-07-09 08:10:39] ArmUpdate record found.
[2010-07-09 08:10:39] GetFileVersion(): C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2010-07-09 08:10:39]    File version: 1.1
[2010-07-09 08:10:39]    Build number: 7
[2010-07-09 08:10:39]    Revision number: 0
[2010-07-09 08:10:39] New file object: AdbeRdrUpd933_all_incr.msp
[2010-07-09 08:11:08] C:\ProgramData\Adobe\Reader\9.3\ARM\29139
[2010-07-09 08:11:08]    GetLastError(): 0x2 - The system cannot find the file specified.
[2010-07-09 08:11:08] Updated time stamps for 4 files

Re: System security 2009 automatically installed

Similar Messages

Maybe you are looking for