Re: Virtual File System and NCP Shares

I can confirm that VFS does not work on NCP volumes. In fact an admin volume
is not created without NSS.
I'm using the X-plat APIs to manage trustees on NCP volumes.
John
"HBware (hans)" <[email protected]> wrote in message
news:8W6dl.1960$[email protected]..
> Hello does anyone know how to manage the filerights on non NSS NCP shares?
>
> I can't do this with Virtual File System, the shares aren't available as
> volumes there.
> Do you have to use the "old" netware NWAddTrusteeExt for this (it works),
or
> is there another library?
>
> Thx in advance
> Hans
>
>

with fuse you can do that i think.
but I take it your thing is not posix compliant? aren't there enough fs'es already you could use instead? or do you mostly want to learn? in that case it's cool

Similar Messages

OES11 SP2 - Linux File System and NSS Pools & Volumes

Planning to install our first OES11 SP2 server into an existing tree - the
idea is to run this new OES11 server virtualized on VMware ESXi 5.5
The existing tree has two physical NW6.5SP8 servers running eDirectory
Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
servers is used for DHCP/DNS, File Sharing from three NSS volumes and
Groupwise 7.0.4 whilst the second server is used for FTP services and
eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
SP2 server with one for file sharing and the other for making the move from
GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
new OES11 SP2 server.
I've come across a couple of posts for earlier versions of OES which
recommended not to put the Linux Native OS File System and NSS storage
pools/volumes on the same hard drive. Apparently the advice was a result of
needing to allow EVMS to manage the drive which could be problemmatic.
I've read the OES11 documentation which says that "The Enterprise Volume
Management System (EVMS) has been deprecated in SLES 11, and is also
deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
managing NetWare partitions under Novell Storage Services (NSS) pools."
So I'm wondering if there is still a compelling requirement to keep the
Linux Native File System and NSS pools/volumes on separate hard drives or
can they both now safely co-exist on the same drive without causing
headaches or gotchas for the future?
Neil

Hi Willem,
Many thanks for the further reply.
So we can just use the VMWare setup to "split" the one physical drive into
two virtual drives (one for the OS and the second for the pools).
And I've seen posts in other forums about the need for a decent battery
backed cache module for the P410i controller so I'll make sure we get one
(probably 512Mb module + battery).
Can I ask what is the advantage of configuring each VM's virtual disk to run
on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
scsi 1:0, and so on)?
Cheers,
Neil
>>> On 9/5/14 at 12:56, in message
<[email protected]>,
magic31<[email protected]> wrote:
> HI Niel,
>
> xyzl;2318555 Wrote: >
>> The new installation will run on a Proliant ML350 G6 with P410i>
> controller
>> so we can use the raid capability to create two different logical drives>
> as
>> suggested.
>
> As you will be using ESXi 5.5 as host OS, it's not needed to split
> thehost server storage into two logical drives... unless that's what
> youwant in perspective for "general performance" or redundancy reasons.
> Italso depends on the options that P410i controller has.
>
> On a side note, I'm not too familiar with the P410i controller... domake
> sure you have a decent battery backed cache module installed, asthat will
> greatly help with the disk performance bit.
> If the controller can handle it and the controller can handle it, go
> forraid 10 or raid 50. That might be too big a space penalty but will
> helpwith disk performance.
>
> Once you have your VMware server up and running, you can configure
> thetwo VM's with each two or more drives attached (on for the OS,
> thesecond or others for your pools).
> I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
> &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
> vmvirtual disk).
> With VMware you can than also configure each VM's virtual disk to run
> onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
> toscsi 1:0, and so on).
>
>
> xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
> should be reserved> or
>> used for the Linux Native OS File System (/boot, /swap and LVM)?
>>
>
> Here's one thread that might be of interest (there are more
> throughoutthe SLES/OES
>
forums):https://forums.novell.com/showthread...rtitioning-%28
> moving-from-NW%29
>
> I still contently follow the method I choose for back in 2008, justwith
> a little bigger sizing which now is:
>
> On a virtual disk sized 39GB:
>
> primary partition 1: 500 MB /boot , fs type ext2
> primary partition 2: 12GB / (root), fs type ext3
> primary partition 3: 3 GB swap , type swap
>
> primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
> therest of the disk **
> LVM volume (lv_var): 12 GB /var , fs type ext3
> LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
> * there's still a little space left in the LVM VG, in case var needs
> toquickly be enlarged
>
> One thing that's different in here vs what I used to do: I replaced
> the/tmp mountpoint with /usr/install
>
> In /usr/install, I place all relevant install files/IOS's
> andinstallation specifics (text files) for the server in question. Keeps
> itall in one neat place imo.
>
> Cheers,
> Willem-- Knowledge Partner (voluntary sysop)
> ---
> If you find a post helpful and are logged into the web interface,
> please show your appreciation and click on the star below it.
>
Thanks!---------------------------------------------------------------------
---magi
> c31's Profile: https://forums.novell.com/member.php?userid=2303View this
> thread: https://forums.novell.com/showthread.php?t=476852

Solaris Virtual File System

Have Solaris virtual file system been changed since Solaris 2.5.1? How much?

AFAIK, the VFS is not an official (and documented) interface
and may change from solaris release to solaris release
(perhaps even with a new kernel patch).
Other, you can probably get the Solaris 8 Foundation Source,
and use it as the definitive reference documentation ;-)

Solaris File System/ Virtual File system Documentation

can anybody help me in finding solaris virtual file system documentaion/books ?
thanks in advance,
-mayur

AFAIK, the VFS is not an official (and documented) interface
and may change from solaris release to solaris release
(perhaps even with a new kernel patch).
Other, you can probably get the Solaris 8 Foundation Source,
and use it as the definitive reference documentation ;-)

Patch Fails: 119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch

When I try to use my Sun(TM)Update Manager, I get:
119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch Failed.
Utility used to install the update failed with exit code 997. Patch is not available in the patch directory.
It is the only patch left to be installed and I tried rebooting several times with no luck. There is no 119907-13 directory or 119907-13.jar in my /var/sadm/spool either. Thanks for any hints.
--Bob

Thanks.
I have the free version of Solaris for the x86/x64 platform on my workstation at home. I did register the OS when I installed it, but I do not have a support contract.
I am curious as to why this has never been an issue before with the hundreds of patches I've installed previously.
If I do not wish to purchase a support contract, there ought to be a way to get the patch out of my Sun(TM) Update Manager so that the green indicator in my
systray doesn't drive me nuts.
Thanks for your help and any further suggestions.
--Bob

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Please enter repository schema password:
Securing dbconsole... Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Commons Virtual File System

Commons Virtual File System
Commons VFS provides a single API for accessing various different file systems. It presents a uniform view of the files from various different sources, such as the files on local disk, on an HTTP server, or inside a Zip archive.
here is the link
http://commons.apache.org/vfs/index.html
Now i want to use this API please can any one give me links or suggest some books to explore this API
i need some tutorials (basics) for understanding this API.
Thanks in Advance.

Roopesh_Saigaonkar
Don't multipost the same question. I've removed the thread you started in the Java Desktop Applications forum one minute after this one.
db

Virtual File System : vfs_freevfs function

Does anybody know anything about Solaris virtual file system function "vfs_freevfs" from vfsops struct from
vfs.h. Thanks,Veselka

vfs_freevfs is callback which gets called when a file system is unmounted to release (free up) the resources held by the file system.
Saurabh Mishra

File system and LR2 file system view summary

Hello,
Is there a way when navigating a directory via the Folders panel to click on the folder and get summary information about the contents of the folder both from a file system perspective as well as a Lightroom perspective?
file system perspective: number of physical files supported by LR2 in the folder
LR2 perspective: the number of files that have virtual copies, how many total virtual copies total, how many photos are in stacks, how many stacks, etc.
Thanks,
Matt
-Windows XP x64 SP2
-AMD Athlon 64 X2 Dual Core 6400+
-4.00 GB of RAM
-Lightroom Version 2.0 64-bit 481478 Camera Raw 4.5
-Two Silicon Graphics GDM-5011P Monitors
-Huey Pro with version 1.5 of their calibration/profiling software
-Nvidia Evga 8800 GT graphics card with 512 MB of Video RAM
-Monitor One: The 'normal' Lightroom window in either the Library or Develop Module
-Monitor Two: 'Loupe-Normal' in 1:1 view

 No, you can't specify an entire filesystem as something to cluster. I
 suggest using NFS or some shared filesystem and then running a cluster
 off of that.
 - Mike
 Michael Lenart wrote:
 >
 > yes
 > "Mike Benham" <[email protected]> wrote in message
 > news:[email protected]..
 > >
 > >
 > >
 > > I'm not sure if I understand what you're asking. How can you cluster a
 > > filesystem? It seems like you want to mount some filesystem via NFS and
 > > then access that from each instance of a server? Are you asking if
 > > Weblogic can perform the duty of NFS?
 > >
 > > - Mike
 > >
 > >
 > > Michael Lenart wrote:
 > > >
 > > > Can the file system be clustered?? For example, in the cluster level
 > > > property file can I have a file system with the name of XDrive and then
 > use
 > > > that file system in my components??

Shared file system and other questions

Hi,
 Is shared file system common for all WL in the cluster or each WL has its
 own one.
 Next questin is connected with proxy server.
 I'm not sure if there should be one proxy server for two servers working in
 one cluster or each server should has own proxy server (I mean WL proxy
 server).???
 In my opinion there should be one proxy server which redirect requests to
 server in cluster using some balancing method. But when I read documentation
 about cluster's architectures I saw the picture where each WL cluster server
 had proxy own server. I'm not sure if this picture showed only outline of
 architecture or it was real solution???
 Is it better to install another proxy server (for example Apache) than WL
 proxy server?
 In previous questions I asked if it is possible to replic static classes,
 fields etc. Prasad Peddada told that it is not replicated. But I wonder if
 there exists some method to force replicating it.? Maybe we can implement
 some method and run it?
 Thanks,
 Best regards,
 Robert


Mike.
 In WLS51 cluster, it is better to specify different workingDir for each
 server. You can create a weblogic.properties in your per-server directory
 and add jspc properties in that file.
 Cheers - Wei
 "Mike Reiche" <[email protected]> wrote in message
 news:[email protected]...
 >
 > If you share directories between instances -
 > what happens when two WL instances decide to compile
 > the same JSP at the same time?
 >
 > Mike
 >
 >
 > Viresh Garg <[email protected]> wrote:
 > >
 > >
 > >
 > >
 > >"Robert Zaczyñski" wrote:
 > >
 > >> Hi,
 > >> Is shared file system common for all WL in
 > >the cluster or each WL has its
 > >> own one.
 > >
 > >I am not sure I understand your question. We
 > >recommend using shared file system
 > >for ease of maintanence and to get rid of pain
 > >for versioning problems for
 > >application code. It is not a requirement of
 > >WLS cluster. I really don't
 > >understand what you mean by
 > >"Is shared file system common for all WL in
 > >the cluster or each WL has its
 > >own one
 > >"
 > >
 > >>
 > >>
 > >> Next questin is connected with proxy server.
 > >> I'm not sure if there should be one proxy
 > >server for two servers working in
 > >> one cluster or each server should has own
 > >proxy server (I mean WL proxy
 > >> server).???
 > >> In my opinion there should be one proxy server
 > >which redirect requests to
 > >> server in cluster using some balancing method.
 > >But when I read documentation
 > >> about cluster's architectures I saw the picture
 > >where each WL cluster server
 > >> had proxy own server. I'm not sure if this
 > >picture showed only outline of
 > >> architecture or it was real solution???
 > >
 > >One or more proxy servers can be used. One is
 > >just fine, however you **might**
 > >want to use multiple proxies for heavily loaded
 > >application to avoid contention.
 > >All proxy servers will load balance between
 > >all servers in clsuter. a proxy
 > >servers is not attached or bound to an instance
 > >in cluster.
 > >
 > >>
 > >>
 > >> Is it better to install another proxy server
 > >(for example Apache) than WL
 > >> proxy server?
 > >>
 > >> In previous questions I asked if it is possible
 > >to replic static classes,
 > >> fields etc. Prasad Peddada told that it is
 > >not replicated. But I wonder if
 > >> there exists some method to force replicating
 > >it.? Maybe we can implement
 > >> some method and run it?
 > >
 > >I would recommend that for static classes, you
 > >use context parameters of web
 > >application or something similar, why do you
 > >need to replicate them. WHy not
 > >each cluster instance have a local copy and
 > >use their own copy for such
 > >classes/fields?
 > >
 > >>
 > >>
 > >> Thanks,
 > >> Best regards,
 > >> Robert
 > >
 > >Viresh Garg
 > >Principal Developer Relations Engineer
 > >BEA Systems
 > >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0
 > >transitional//en">
 > ><html>
 > >
 > >"Robert Zaczyñski" wrote:
 > ><blockquote TYPE=CITE>Hi,
 > > Is shared file system common for all WL
 > >in the cluster or each WL has
 > >its
 > > own one.</blockquote>
 > >
 > > I am not sure I understand your question.
 > >We recommend using shared
 > >file system for ease of maintanence and to get
 > >rid of pain for versioning
 > >problems for application code. It is not a requirement
 > >of WLS cluster.
 > >I really don't understand what you mean by
 > > "Is shared file system common for all
 > >WL in the cluster or each
 > >WL has its
 > > own one
 > > "
 > ><blockquote TYPE=CITE>
 > >Next questin is connected with proxy server.
 > > I'm not sure if there should be one proxy
 > >server for two servers working
 > >in
 > > one cluster or each server should has own
 > >proxy server (I mean WL proxy
 > > server).???
 > > In my opinion there should be one proxy
 > >server which redirect requests
 > >to
 > > server in cluster using some balancing method.
 > >But when I read documentation
 > > about cluster's architectures I saw the
 > >picture where each WL cluster
 > >server
 > > had proxy own server. I'm not sure if this
 > >picture showed only outline
 > >of
 > > architecture or it was real solution???</blockquote>
 > >
 > > One or more proxy servers can be used.
 > >One is just fine, however
 > >you **might** want to use multiple proxies for
 > >heavily loaded application
 > >to avoid contention. All proxy servers will
 > >load balance between all servers
 > >in clsuter. a proxy servers is not attached
 > >or bound to an instance in
 > >cluster.
 > ><blockquote TYPE=CITE>
 > >Is it better to install another proxy server
 > >(for example Apache) than
 > >WL
 > > proxy server?
 > >In previous questions I asked if it is possible
 > >to replic static classes,
 > > fields etc. Prasad Peddada told that it
 > >is not replicated. But I wonder
 > >if
 > > there exists some method to force replicating
 > >it.? Maybe we can implement
 > > some method and run it?</blockquote>
 > >
 > > I would recommend that for static classes,
 > >you use context parameters
 > >of web application or something similar, why
 > >do you need to replicate them.
 > >WHy not each cluster instance have a local copy
 > >and use their own copy
 > >for such classes/fields?
 > ><blockquote TYPE=CITE>
 > >Thanks,
 > > Best regards,
 > > Robert</blockquote>
 > >
 > >Viresh Garg
 > > Principal Developer Relations Engineer
 > > BEA Systems
 > > </html>
 > >
 > >
 >

Image: display from local drive, upload to server file system, and display from server

Hello,
I am using jdev 11.1.2.4.0...
The requirement is that users would like to upload images from their local drive to server drive and they would like display images from server drive later.
We don't want to keep images in database. I am not sure what the solution should be; however, I plan to ....
1. create a table to keep an information of images -- image_id, image_location (server drive), image_filename
2. create a page where users can enter image information and specific filename from a local drive (I think I will use inputFile component) and provide the preview button to display an image on screen before save it. To save data is to save information to the database and copy an image file to the server drive (the destination location for image files is predefined.)
3. create another page where users can browse information from the database and display an image for a selected record by getting from the server.
I need suggestions on...
1. how to display an image on page from the local drive?
2. how to copy a file from a local drive to a server?
3. how to display an image on page from the server drive?
Thank you.
nat

See:
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-1/
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
http://tompeez.wordpress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-3/
Where Timo saves images to the database, you save it to the file system (examples on how to do this from Java are available plenty if you just Google for it). Similar to Timo you then use the image tag to display images. The difference is that you can directly add the URL from the database table.
The benefit of using a database to host images is that you are not dependent on file server structures though
Frank

BIP and Siebel server - file system and load balancing question

1. I just need to understand whenever the reports are generated through BIP, are there reports stored on some local directory (say Reports) on the BIP server or Siebel File system? If on a File system how will archiving policy be implemented.
2. When we talk of load balancing BIP Server. Can the common load balancer be used for BIP and Siebel servers?
http://myforums.oracle.com/jive3/thread.jspa?threadID=335601

Hi Sravanthi,
Please check the below for finding ITS and WAS parameters from backend :
For ITS - Go to SE37 >> Utilities >> Setting >> Click on ICON Right Top Corner in popup window >> Select Internet Transaction Server >> you will find the Standard Path and HTTP URL.
For WAS - Go to SE37 >> Run FM - RSBB_URL_PREFIX_GET >> Execute it >> you will find PRefix and PAth paramter for WAS.
Please refer to this may help step-by-step : How-to create a portal system for using it in Visual Composer
Hope it helps
Regards
Arun

Backup to file system and sbt_tape at the same time?

hello!
is it possible to do a rman backup to disk and sbt_tape at the same time (just one backup, not two)? the reason is, that i want to copy the rman backup files from the local file system via robocopy to another server (in a different building), so that i can use them for fast restores in the case of a crash.
if not, what is the recommended strategy in this case? backups should be available on tape AND the file system of a different machine.
environment: oracle 10g, windows server 2008, commvault for backup on tape
thanks for your advice.
best regards,
christian

If you manually copy backupsets out of the FRA to another location, but still accessible as "local disks", you can use the CATALOG command in RMAN to "catalog" the copies.
Thus, if you opy or move files from the FRA to /mybackups/MYDB, you would use
"CATALOG START WITH /mybackups/MYDB" or individually "CATALOG BACKUPPIECE /mybackups/MYDB/backuppiece_1" etc
Once you have moved or removed the backupsets out of the FRA, you must use
"CROSSCHECK BACKUP"
and
"DELETE EXPIRED BACKUP"
to update the RMAN repository. Else, Oracle will continue to "account" for disks pace consumed by the BackupPieces in V$FLASH_RECOVERY_AREA_USAGE and will soon "run out of space".
You would do the same for ArchiveLogs (CROSSCHECK ARCHIVELOG ALL; DELETE EXPIRED ARCHIVELOG ALL) if your ArchiveLogs go to the FRA as USE_DB_RECOVERY_FILE_DEST

Cluster file system and BDB - does it work ?

Hi,
I've read in the reference guide that:
" No commercial remote filesystem of which we're aware supports
coherent, distributed shared memory for remote-mounted files"
What about cluster file systems like veritas cluster file system ?
Can I use this file system with BDB ?
I'm trying to find a solution for having one database visible from two computers.
Reader and writer exist on each machine. Any clue how to do that ?
best regards
Moris

Award points, level up, and earn new privileges
Level/Points/Privilege
1 - 0-149 - Reputation level displayed
2 - 150-499 - Ability to report posts to Apple Support Community Hosts
3 - 500-999 - Ability to set a custom avatar
4 - 1000-4999 - Invitation to community conference calls
5 - 5000-7999 - Regional Meet-up invitations
6 - 8000-19999 - Access to The Lounge, Apple Support Communities T-Shirt
7 - 20,000-34,999 - Coming Soon
8 - 35,000-49,999 - Coming Soon
9 - 50,000-79,999 - Coming Soon
10 - 80,000+ - Coming Soon

What is virtual file system in sharepoint, where are the site pages stored?

I came across this paragraph in Inside Microsoft SharePoint 2010; page 126 :-
When SharePoint Foundation provisions the Proposals document library,it creates a folder named Proposals at the root of the site and then it creates a child folder named Forms.
Inside the Forms folder, it creates a set of site pages with names such as DispForm.aspx, EditForm.aspx, AllItems.aspx, and Upload.aspx. The reason that SharePoint Foundation creates site pages inside the Forms folder for each
new list and document library is that these site pages will provide users with the forms they will use to add and manage content.
My question is that:-
1) What us the root of the site means?
2) Are the pages for edit/add/allitems created in filesystem OR in the content database?
3)Suppose we create new sitepages, then where are they stored? In filesystem or in content db?

Hi,
For All above queries the data and site pages are stored in content database
Root folder: A folder created for the document library under the web (sub site) and another folder created as child folder named Forms. Site pages are created in SharePoint content database
SitePages(Add/display/edit): These pages are created in SharePoint content database
Note: The SharePoint will not create any physical aspx page OR folder in the file system while creating document library.
Hope this will help you.
Senthilrajan Kaliyaperumal
But the book mentions that:-
When SharePoint Foundation provisions the Proposals document library,it
creates a folder named Proposals at the root of the site and then it creates a child folder named Forms.
Is
this wrong? Are the folders created in filesystem or content db? If the files are not supposed to go into the filesystem, then why are the folders created?

Re: Virtual File System and NCP Shares

Similar Messages

Maybe you are looking for