Re : what is Diffrent Between ClusterTable and poolTable ?

Hi ,
What is Exctaly diffrent Between Clustertable and poolTable pls let me know......
Kind Regards
Arief .S

<b>Pooled Tables:</b>
A pooled table in R/3 has a many-to-one relationship with a table in the database. For one table in the database, there are many tables in the R/3 Data Dictionary. The table in the database has a different name than the tables in the DDIC, it has a different number of fields, and the fields have different names as well. Pooled tables are an SAP proprietary construct.
When you look at a pooled table in R/3, you see a description of a table. However, in the database, it is stored along with other pooled tables in a single table called a table pool. A table pool is a database table with a special structure that enables the data of many R/3 tables to be stored within it. It can only hold pooled tables.
R/3 uses table pools to hold a large number (tens to thousands) of very small tables (about 10 to 100 rows each). Table pools reduce the amount of database resources needed when many small tables have to be open at the same time. SAP uses them for system data. You might create a table pool if you need to create hundreds of small tables that each hold only a few rows of data. To implement these small tables as pooled tables, you first create the definition of a table pool in R/3 to hold them all. When activated, an associated single table (the table pool) will be created in the database. You can then define pooled tables within R/3 and assign them all to your table pool.
Pooled tables are primarily used by SAP to hold customizing data.
<b>Cluster Tables:</b>
A cluster table is similar to a pooled table. It has a many-to-one relationship with a table in the database. Many cluster tables are stored in a single table in the database called a table cluster.
A table cluster is similar to a table pool. It holds many tables within it. The tables it holds are all cluster tables.
Like pooled tables, cluster tables are another proprietary SAP construct. They are used to hold data from a few (approximately 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common, and if the data in these tables are all accessed simultaneously.
Table clusters contain fewer tables than table pools and, unlike table pools, the primary key of each table within the table cluster begins with the same field or fields. Rows from the cluster tables are combined into a single row in the table cluster. The rows are combined based on the part of the primary key they have in common. Thus, when a row is read from any one of the tables in the cluster, all related rows in all cluster tables are also retrieved, but only a single I/O is needed.
A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common. Cluster tables reduce the number of database reads and thereby improve performance.
Restrictions on Pooled and Cluster Tables
Pooled and cluster tables are usually used only by SAP and not used by customers, probably because of the proprietary format of these tables within the database and because of technical restrictions placed upon their use within ABAP/4 programs. On a pooled or cluster table:
- Secondary indexes cannot be created.
- You cannot use the ABAP/4 constructs select distinct or group by.
- You cannot use native SQL.
- You cannot specify field names after the order by clause. order by primary key is the only permitted variation.
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Similar Messages

Re : what is diffrent Between Synchronies and Asynchronies process

Hi ,
what is diffrent between Synchronies and Asynchronies process in session Method and call Transcation method pls give one Example...
Thanks
Arief .S

Synchronus data processing is that in which the program calling the update task waits for the update work process to finish the update before it continues processing.
In Asynchronus update the callng program does not wait for update work process to finish the update and continues as normal.
A BDC done with sessions is always synchronus.
A BDC with call transaction is by default asynchronus
unless you define it explicitly as
call transaction 'XXXX' ...... update 'S'.
( If you donot define update option it is defaulted to "A" ).
The update method is of importance when one transaction locks data which may be required by a subsequent transaction . The subsequent transaction will fail if data is locked from previous one. An example would be you are creating sales order for same material in succession ( with asynchronus update ). Quite likely that some of transactions would fail due to material locked.
For large volume of data Call Transaction will be faster but you have no restart capability here. Suppose from 1000 transactions 100 fails . You will have to run the BDC program again exclusing the ones which wrere successful. However with session method you have the option to process the error transactions again in SM35 . So if you are sure that errors will not occur use call transaction else use session method.

Diffrent between BDC and BAPI

Gurus..
Please let know what is the diffrent between BAPI and BDC development?
thanks

Hi
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
Regards
Anji

What is difference between modify and update i am using

hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
Arora

Hi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

What is Difference between SXMB_MONI and SXMB_MONITOR?

what is Difference between SXMB_MONI and SXMB_MONITOR?
Can any explain to this question.please?

Hello,
Both are same.
SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
SXI_MONITOR directly executes the monitoring report.
Thanks,
Satya

Whats the difference between list and lov ?

Whats the difference between list and lov ?
i can do the same things with a list what an lov can do .
infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
while the lov can get all the values of items depending on the query.
like
select ename, job, sal from emp
will show all the three items values in lov?

Also, if you're looking in the US store, the prices are:
- Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
- Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
- Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
Matt

Whats the difference between Fatal1ty and Fatal1ty USB heads

Whats the difference between Fatal1ty and Fatal1ty USB headset? What is the $30 price difference for other than a USB connection?
Also, what is the advantage to using the USB port?
Still trying to decide on which headset to buy. I will be using these mainly for gaming and some music. Although i'm not real picky when it comes to music quality. Even considered the HS-1200 wireless. Which headset of these 3 has the best sound quality and better quality?
Message Edited by iowabucks on 10-20-2008 07:54 AM
Message Edited by iowabucks on 10-20-2008 08:10 AM

Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

What is defference between RT and CRT table in ABAP HR

Hi Experts,
What is defference between RT and CRT table in ABAP HR

The RT (results table) will give you the payroll results for one specific run of payroll. It includes all wage types that were processed during the payroll run. The CRT (cumulated results table) contains payroll results only for cumulated wage types that have been processed in payroll runs so far for the year. It contains month-to-date, quarter-to-date, and year-to-date totals for those wage types. Not all wage types found in the RT will be available in the CRT. You will have to check the configuration for a specific wage type to determine if it is available in both
You can check all RT WT in PC00_Mxx_CWTR where "xx" is youre molga. Also, you can check RT, CRT and other payroll results in PC_Payresult.
Report RPCEDTx0 prints out payroll results (x=country indicators).
use t-code PT66 to display the cluster details that is results table

Whats the difference between Authentication and Login check up ?

whats the difference between Authentication and Login check up ?

Authentification is a more generic term. It's generally applicable to any situation where you check that information comes from where it claims to come from.
Login is just one form of authentification.

Whats the difference between comparable and comparator?

whats the difference between comparable and comparator?
when must i use comparable, and when must i use comparator?

whats the difference between comparable and
comparator?Comparable is from the java.lang package, Comparator from java.util.
when must i use comparable, and when must i use
comparator?Here's a tutorial on both:
http://java.sun.com/docs/books/tutorial/collections/interfaces/order.html

Whats the difference between oracle9i and oracle10g

whats the difference between oracle9i and oracle10g?

794244 wrote:
whats the difference between oracle9i and oracle10g?About 12...
SQL> select utl_match.jaro_winkler_similarity('oracle9i','oracle9i') as sameness from dual;
SAMENESS
100
SQL> select utl_match.jaro_winkler_similarity('oracle9i','oracle10g') as sameness from dual;
SAMENESS
88
SQL>

What is different between Analytics and VC Forum?

Hi Experts!
I don't know what is different between Analytics and VC forum in SDN. of course, Analytics is not Visual composer.
But, I guess that most of analytics questions will be related to Visual Composer in this Analytics Forum.
How about your opinion?

Hi Young
Analytics is business process oriented and thus it's domain is BPX hence it is placed under forum for BPX(Business Process Expert).
VC is a tool and it is in technology domain.
First we discuss a scernario based on particular business process. Then we prepare detailed level of analysis-reporting and actionable analytics this business process would need. Then we use tools like VC to accomplish this actionable analytics.
Hope this helps
Regards
Pradip

What's Different Between ODI and FDQM ?

I need to know What's Different Between ODI and FDQM ?

At is simplest ODI is an enterprise scale ELT tool that can cope with moving very large amounts of data bwteen heteregeneous systems. It requires a fair degree of technical knowledge to use well and that the user is pretty competent with SQL. It is not really an end user tool and the jobs tend to be lights out scheduled processes with a limited user interface for executing these jobs. FDQM is more of a data quaility tool which gives the average end user the out of the box functionality to be able to transform and load data into various target systems. It is not designed to move very large amounts of data efficiently i.e. multi millions of lines of data like ODI. However it does have a rich user interface that provides an easy to use mapping engine, a repeatbale controlled data load process and has a host of in built reporting and audit features which would have to be built from scratch in a tool like ODI

What's different between OWB9i and Discorver4i?

1.What's different between OWB9i and Discorver4i?
2.Discorver4i is ROLAP or MOLAP or HOLAP?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

What' s different between color and swatches?

what' s different between color and swatches?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

Re : what is Diffrent Between ClusterTable and poolTable ?

Similar Messages

Maybe you are looking for