Can't use Data type created with External Definition

Hi,
In the repository, I would like to transport a very complexe DataType from one XI system to an other one. As I don't want to spend a week to create data types, I created a new External Definitions and loaded my XSD schema (that I exported as XSD from Source system) with Messages parameter set to "From All Available Global Elements". I don't set the "Source". I can see the "Imported Document" and "WSDL", but the Messages and External References tabs are empty. Furthermore, I can't use my new message type in a Outbound Asyncrhronous Message Interface.
Here is a very small XSD file that I use to test my scenario.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://veilleux.1" targetNamespace="http://veilleux.1">
     <xsd:complexType name="SimpleType1">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               bdfdbef1df9711daa2c9001125f86068
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="Name" type="SimpleType2">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         bdfdbef0df9711daa821001125f86068
                         </xsd:appinfo>
                    </xsd:annotation>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
     <xsd:complexType name="SimpleType2">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               0fecc852df9811da899a000f206d294f
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="Name" type="xsd:string">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         ac58afc0df9711da86af001125f86068
                         </xsd:appinfo>
                    </xsd:annotation>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
Any one can help me please.
Thanks, Davy

Hello Moorthy,
My XSD is correct since it's XI itself that generated it from real Data Type on my source System (but I tested it in Internet Explorer and it looks fine).
I tried to select my ExternalDefinition as source in MessageMapping, but XI doesn't let me specify it (Apply button is disabled when I select my ExternalDefinition).
I'm pretty sure that it is related to the fact that I should have a Data Type in "Messages" and "External References" tabs and I have nothing. My XSD is legal, but it seems that XI can't automatically create the data type from it.
Do you have any other idea?
Thanks, Davy

Similar Messages

  • Can I use thermocouple type L with NI4351

    Can I use thermocouple type L with high resolution temperature and voltage loggers NI4351
    if yes, then where I can find accuracy data

    Hello,
    I could not find the milliVolt input ranges for that specific type of thermocouple. What I did find was that it has a temperature range between -200 and 900 deg C. Since the temperature ranges seem similar to other types of thermocouples, you can compare these to the ones mentioned in Appendix A of the NI-4351 User's Manual (www.ni.com/manuals, and make a search for "4351") in order to get an idea of the accuracy that you can expect.
    Regarding the software, there's two options:
    1. To use NI-DAQ: with this, you can create a Temperature Custom Scale and use it with a Virtual Channel so that the Voltage readings will be translated into Temperature readings.
    2. You can use the NI-4351 own drivers for reading the voltages, and then you can
    add software tables to your program so that those voltages will be translated into temperature values.
    Good luck with your application!

  • Can I use MacBook pro A1211 with external monitor, screen has died but

    CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine

    Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.

  • Can't use voice/video functionality with external domain connected users through federation

    Hello All,
    Hope you keeping well..!!
    We are communicating with external customers lync server through federation option setup on our corporate lync server.  We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
    that we were able to browse the customer contact through corporate lync account.
    We were also able to chat with external customer but however voice/video functionality are not working through same session.  Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
    We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync.  Could you pl help or guide with the way to resolve the issue.
    Thanks, MK

    Thanks for your reply.<o:p></o:p>
    Audio/Video works fine within corporate when dial any lync contact.  We only have issue while trying to use the same functionality with any other
    external lync contact configured over federation option.<o:p></o:p>
    We already checked the security rules and all required ports are open, as confirmed by local resolver group.<o:p></o:p>
    We have checked with external parties and according to them their systems are hosted by Microsoft as part of office 365 suite and they already have
    federation option for 17 different customers which works fine.  Which means issue must be your local end.<o:p></o:p>
    Is there any tool available to identify the issue from client end?<o:p></o:p>
    Also I have a question here....In my corporate environment...client is sitting in India and lync servers are hosted in UK and users connect to it
    over MPLS route.  In Client lync configuration we have  internal/external servers configured .....so when i tried to make a voice call with external lync users then I see from netstat -a command that traffic hitting to multiple public IP addresses
    directly from my machine..<o:p></o:p>
    Does it mean that client required internet connectivity with specific open media ports to connect with external parties for video/voice? or in ideal
    case all request should handle by corporate internal server which should took UK internet path to connect with external lync contact?
    Thanks, MK

  • How can I use instance methods created with HashMap

    class Template
    static HashMap customer;
    a few methods created various customer
    public static display() //to display a particular customer information among i've created above
                 String objectName,currentObjectName;
              Customer customer;
              Scanner scan=new Scanner(System.in);
              System.out.print("Please enter the customer name");
              objectName=scan.nextLine();
              Iterator iteratorForCustomer=CustomerMap.entrySet().iterator();
              Map.Entry customerEntry=(Map.Entry)iteratorForCustomer.next();
             while(iteratorForCustomer.hasNext())
                    customerEntry=(Map.Entry)iteratorForCustomer.next();
                    if(objectName.equals((String)customerEntry.getValue()))
              System.out.println("Name : " +customer.getName()); //I'm trying to reference to an instance method getName() here but i can't do that .
    }The problem is I've created as many as I want and later in the program I tried to redisplay a particular customer information based on the input (objectName). User type in the objectName and I tried to look for a particular customer Object in the HashMap and display only the relevant customer information. Is there any way to do it ? Thanks everyone in advance.

    Peter__Lawrey wrote:
    use the get method
    [http://www.google.co.uk/search?q=map+tutorial+java]
    [http://java.sun.com/docs/books/tutorial/collections/interfaces/map.html]
    And then either look at a generics tutorial, or, if you're stuck on a pre-1.5 version of Java, find out about casting

  • No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

    HI,
    I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
    then click saves it shows the below error
    No exact match was found. Click the item(s) that
    did not resolve for more options. You can also use Select button to choose External Data
    __fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
    No Matching Items
    Please help on this.
    varinder

    I don't understand the question exactly, could you restate it.  Sorry mate, I might just be braindead.
    But, as far as the issue, it is by design.  the column is a lookup columns which essentially ties to the external data.  if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
    it to be changed.
    are you wanting to make the ECT read only?  that's simple enough.  you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete).  That will not, however make it read-only in any other systems that access that
    external data, as I assume its not just SP or else it wouldn't be external
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • I have adobe xi pro, but i can´t edit a form create with adobe 8.0, the message is this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    If the form was created using LCD then it can only be edited there. This
    application used to be bundled with Acrobat Pro, but that's no longer the
    case. So if you want to edit this file then you need to purchase it, yes.
    On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]>

  • Can i use DLL file created by Fortran with the call libary function node

    Can i use a DLL created by Fortran (Compaq Visual Fortran) with the call library function node in labview. If yes how do i create the DLL file if i have the Fortran code.
    Thanks

    Yes! Maybe these old post will help:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=88786
    http://forums.ni.com/ni/board/message?board.id=170&message.id=109150
    Good luck!
    Message Edited by altenbach on 03-21-2006 02:35 PM
    LabVIEW Champion . Do more with less code and in less time .

  • OAM with OVD SSL , can I use openSSL to create certificate

    OAM with OVD SSL , can I use openSSL to create certificate . In the doc, it use miscrosoft cert server . But I want to use openssl , but not success. Does anyone success to do?

    OAM with OVD SSL , can I use openSSL to create certificate . In the doc, it use miscrosoft cert server . But I want to use openssl , but not success. Does anyone success to do?

  • Performance issue while using data type 'STRING'.

    Hello All,
    I have created a table for storing values of different features coming under a particular country. Since the last field 'Value field' have to hold text upto 800characters for some features, i have used the data type 'String' with character length specified as 1000. I am able to store values upto 1000characters using this. Also, the table has to hold lots and lots of value, and it will increase in future also.
    Since i have mentioned the data type as 'String', I have one doubt whether this will affect the performance. Because length of most of the values in my value field is less than 75characters and in some case only it will exceed 700characters. So, my question is whether the 'String' data type will allocate the length which am specifying in the table for each entries, though the values entering is less than the specified length.
    For example, if the value of my value field is 'Very High Complexity' which is of length 20characters, will the space allocation be reduced to 20 or will it be still 1000characters?
    Hope someone can clarify my doubt.
    Thanks In Advance,
    Shino
    Moved to appropriate forum
    Edited by: Rob Burbank on Feb 23, 2009 4:27 PM

    Hi Shino,
    Well it is possible to store using STRING or LCHR in the transparent tables. There are some underlyning facts here:-
    1. You can only have one such field per table
    2. You cannot view them in the se11 / se16 table content browser
    3. You will need to maintain an additional field for storing the length of the STRING or LCHR field.
    Regarding the performance:
    even though ABAP allows storing STRING or LCHR type fields in the transparent tables but as soon as the lenght of the field crosses 255 chars it is not advisable to store it directly in the transperant tables.
    You should store that field in the knowledge repository and only a pointer to the knowledge repository in the transperant table field.
    Anyways, Since you have only one field with such a requirement then i would suggest you use STRING instead of LCHR as in LCHR you will have to mandatorily assign a length (like 1000) so even if you are storing only 20 chars or 300 chars the system will reserve a slot of 1000 chars; this is not with string as in case of string everything would be dynamic.
    The result being that the reading time increases in case of LCHR.
    I Hop this answered your question.
    Regards,
    Sagar.

  • Use data type enhancement in XSLT mapping in XI

    Hi Experts,
    I'm working on SNC and I need to add an element to a data type.  I have created a data type enhancemnet with the element in it.  Now I need to get this into my XSLT mapping.  I have tried creating a message type but the data type enhancement is not recognized.
    Are data type enhancements only for proxies?  Can they be used in an XSLT or graphical mapping in XI?
    Thanks
    David Pauley

    Upon further investigation I found that Data Type Enhancements can be used with any message mapping.  There are a couple of things that you must get right.  First when creating the Data Type Enhancement make sure you use the namespace for your custom SWC that you created.  Next make sure that in the Ehancement for Data Type you use the SAP supplied data type name and namespace.  It also seems that your data type enhancement name, mapping name, and operational mapping name must have the Z_ prefix.  Save and activate, then go to system which owns the enhancement and go to SPROXY, you should see your custom SWC and under that you should see your enhanced data type, mapping, and operational mapping.  Activate and modify methods as needed here.

  • Can I  use excel type functions embedded into an online pdf form, ie Qty x Price= total $

    Can I use excel type functions embedded into an online pdf form, ie Qty x Price= total $

    Let me tell you what I am sure about and what I am not sure about:
    I am sure that I want to be able to sell my products online. The industrial market that I sell to usually do not allow the maintenance people that find me on the web, do not have the ability to use credit cards in a typical shopping cart format due to the higher prices that the equipment I sell costs and that most people call me up to 'request a formal quotation' to give to their purchasing depart. So, my bright idea is to create numerous pdf files with very specific url's to match the very specific items that I sell. (1) item per pdf. I am thinking that the advantage to skipping the shopping cart approach and allowing the customer to fill in the qty of items, which would be mulitpled by the price of the item (a constant #) and then hitting a apply button, that would calculate subtotal price. Discounts for the qty the customer inputs (qty of items inputted by customer would be discounted on a percentage x base price) and a refresh the screen. It would allow for SEO advantages from what I have seen in the past in my very vertical market. All forms would be setup using the same functionality, just images, alt text, urls, and readable text would change.
    What I don't know- which is alot, then how to calculate shipping costs. I have a weight per item, which can be added up. I saw an Adobe blog that allows UPS shipping cost to be programmed in. I don't know how dreamweaver works, which was what the blog mentioned would allow for this updated, instantanious interface with UPS and calculating real shipping costs to a specific zip code. Shipping cost would be fluff to this page. The main thing would be to do allow the customer to be able to fill in a qty of the specific item on the page, calculate a discount if / then type thing, be able to have customer email to purchasing dept or print. I would date stamp it with verbage that pricing is valid for XX days and if I could get a copy emailed to me that would be icing on the cake. I believe that this non static pdf would be something different then the current competion and that it would allow for 100's of quotes to be generated without customers having to wait 15 minutes to an hour for me to process the exact document that they are looking for.
    Hajeks

  • Can I use Oracle app server with mysql

    Can I use Oracle app server with mysql. I seem to have the following error when trying to create a datastore. I have mysql.jar in my classpath. Can any one tell me what's wrong.
    Error initializing data-source 'jdbc/topup': DriverManagerDataSource driver 'org.gjt.mm.mysql.Driver' not found

    Yes you can forward requests from your own apache to the iAS. This can be done using mod_proxy. Some hints about how to do this are availlable on this forum.
    mod_oc4j is not a standard apache module, and therefore is not availlable when you download apache. There is no apparent reason to use mod_oc4j on a "regular" webserver (unless you want to build your own iAS). Also there might be some licenseing issues with using mod_oc4j module on a standard apache.
    You can encrypt data that is passed from a random Apache to you iAS.

Maybe you are looking for