Read all the groups and the OU's into my code

dears
i want to read all the group names that are under a certain Organization Unit into my code
how to achevie this
for example
a as string []
a = readAllGroups()
Help please?!

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

Similar Messages

I can't send an email to a contract group. No one in the group gets the email.

I created a contact list group named "focus group 1" but when I sent an email to it, nobody in the group recieved it.
Trying to explore the problem, I tried two things:
I first clicked to "Expand the Group", and the name disappearted from the To field.
I reentered the name in the To field, and this time, I clicked the arrow to "Open it in address book."
That opened my address book to All Contacts on the left and a blank page on the right saying "No Cards".
My husband, an expereinced Mac user, who often sends group emails can't figure it out either.
Can anyone help?
Thanks

What do yo mean by " The sending email surface on every time"?

I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

HT201412 I am reading an e-book and the screen has become blurred to the point that you cannot even see the letter. I checked the e-book in another computer and can be seen without problems. What's worst, when this happens all the web sites have the same

I am reading an e-book and the screen has become blurred to the point I cannot see the letters. Other pages are patched grey. I checked the ebook in another computer and it shows no problem. Also, when this happens, other web sites get blurred or patched. Do you know what can it be?

You can try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. See if that helps.
But if it doens't or if hte issue repeats you may want to make an appointment at your local apple store and have them check it out.

How to print/list all the groups/users present in Weblogic using Java code

Hi,
Weblogic version : 11.1.1.5
How to print/list all the groups/users present in Weblogic using Java code
I want to make a remote connection to Weblogic server and print all the users/groups present in it.
I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
Thanks in advance,
Edited by: 984107 on 05-Feb-2013 05:26
Edited by: 984107 on 05-Feb-2013 22:59

see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
Hope this helps.

Who got this brilliant idea when you want to pick up a contact to first cross the group and then click end ? Did you hire an employee from Microsoft ? Apple MUST remain SIMPLE to use !!!

Who got this brilliant idea and change thing that way : when you want to pick up a contact on your iphone, you first have to cross the group and then click end ? Did you hire an employee from Microsoft ? Apple MUST remain SIMPLE to use !!!

Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad?? Thanks

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad??
Also, once I figure out how to replace iCal with Outlook/Mac on iTunes, how do I synch the phone and pad so that the information on those devices over-writes onto Outlook as a backup, rather than having a blank Calendar on Outlook wipe out all of the information on the phone and pad???
Thanks

If you haven't tried already, plug your devices into iTunes, and on each device next to the "Summary" tab at the top is another tab called "Info." Click that and scroll down to Contacts, Calendars, etc. There should be a pull down bar under each category for "Sync contacts from..." and you should be able to select from that pull down list Outlook. Hit Apply at the bottom and see if that does it.

Is there a way to see on itunes to all my songs the bpm and the key to every song?

I have some external programs such as BPM Analyser or Mixmeister that i can scan all my songs and have the bpm and the key to every song!Is there a Plug-in or something else that i can have that as a "category" on Itunes so dont need to open another program to do that?It will be useful to the same list to have all and don't need to use external program.If someone know something about that please help.

There's a field and column for BPM in iTunes - control-click on any of the column headers to see the full list, from where you can select the BPM column to appear. This if course presumes that the utility you're using will write the BPM information into that field; most will. There's no specific field for the key signature, so the utility would have to write that information into another field such as the Comments.
Regards.

BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.

Hi
Please suggest me some solution that if the BI cluster is DOWN and all the other components are all UP.Only the BI cluster and the Biserver_1 is DOWN under bicluster.so that the analytics is not working and showing in the Internet Explorer as "The Page Cannot be Displayed". But the EM and the Console are Working fine.

Some times it may happen because of the services if they are not started in order
./startNodeManager.sh
nohup ./startWeblogic.sh -Dweblogic.Management.username=username -Dweblogic.Management.password=password > AdminServerStart.log & tail -f AdminServerStart.log
nohup ./startManagedServer.sh bi_server1 -Dweblogic.Management.username=username -Dweblogic.Management.password=password>bi_serverstart.log & tail -f bi_serverstart.log
./opmnctl startall
Try this and let us know the out come.
Mark if helps,
Thanks,

HT5022 I'm trying to add a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version. I've downloaded all available updates of the OS and the utility.. Help!

I'm trying to add my HP wireless printer as a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version. I've downloaded all available updates of the OS and the utility.. Help!

Why would you need to ADD a new Client. Unless the APE sytem is completely different then any other Wireless router the printer should get an IP address from the router. That is IF the printer is setup to get an IP from the LAN DHCP server.
Now you may want to make that IP it does get a Staticly assign IP address so it never changes, which will screw up printing if it does change. But i don't know if you can do that with APE routers.

My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key. If you Macbook boots to your desktop then you have a faulty cable. If you get the same error, then your hard drive just died on you.
good luck.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

If the fonts are installed on the OS they should be there already. If they were only available to CS5 they are probably in the fonts folder in the Adobe section of the Common files (location will be OS dependent), or they may be in ID's own fonts folder.

Mapping and Monitoring all the User and the Field exits

Hello Dears,
Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
Anyone has some documentation?
Regards to all.
FS.

Hello Gurus,
Someone has any information about this question?
Regards to all.
FS.

Read all the groups and the OU's into my code

Similar Messages

Maybe you are looking for