Read EDS file for EtherNet IP

Hi friends,
I need to check the EDS file for EtherNet IP communication. I want to read the EDS file, verify the vendor details and parameters that are being written into the EDS file for a verification purpose.
Is it possible to read the EDS file for EtherNet IP?
Regards,
Ganesha Moorthy
Solved!
Go to Solution.

Hi gnshmrthy,
The example posted from the KB should work with your EDS file. I was able to successfully use it with the default values for the section (Device) and key (VendName). I think you are running into issues because you are using an invalid value for the Key. In this image, I'm using a red arrow to point to the section and I'm circling the different keys that are valid.
Following this you should see results like this:
Let me know if it works!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Similar Messages

Store Critical: Unable to read index file for user/mailtest: System I/O err

more imap
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&V4NXPnux-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&XfJT0ZAB-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&g0l6Pw-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/test: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:52 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:54 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:54 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&V4NXPnux-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:54 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&XfJT0ZAB-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:54 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&g0l6Pw-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:54 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/test: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:36:58 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:37:00 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:37:00 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&V4NXPnux-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:37:00 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&XfJT0ZAB-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:37:00 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/&g0l6Pw-: System I/O error. Administrator, check server log for details.
[27/Nov/2007:13:37:00 +0800] e69-1-c imapd[5984]: Store Critical: Unable to read index file for user/mailtest/test: System I/O error. Administrator, check server log for details.

whr25 wrote:
root@e69-1-c # ./imsimta version
Sun Java(tm) System Messaging Server 6.3-0.15 (built Feb 9 2007)
libimta.so 6.3-0.15 (built 19:27:56, Feb 9 2007)
SunOS e69-1-c 5.10 Generic_118833-24 sun4u sparc SUNW,Sun-FireThis is an old release of 6.3, you should be planning to upgrade to proactivly prevent known bugs.
prstat
2255 mailsrv 407M 310M sleep 59 0 0:00:44 0.0% imapd/3Not 3GB. Of course if you had just restarted messaging server as you noted below then that isn't unexpected.
I'm restart Messaging Server,I't is not problem
This issue is about two days after the RuningWhen the problem does occur what is the prstat output? The size of the imapd processes will increase over-time depending on the number of people accessing the store via IMAP, and the size of the mailboxes (store.idx files) they are accessing.
Regards,
Shane.

In HTTP log: Store Critical: Unable to read index file for user/ uid

All:
Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
We recently have started to see the following errors in our http logs:
[01/Mar/2007:13:03:43 -0500] httpd[5174]: Store Critical: Unable to read index file for user/<uid>: System I/O error. Administrator, check server log for details.
It's occurring a couple of different times during the day to certain users. Then it won't happen for days to anyone, but then start up again. I saw a similar thread to this re: IMAP and I'm curious if http could be having the same problem. We increased the number of process of http (from 2 to 4 a few months ago) but kept the same maxsessions (6000), so maybe I need to change the maxsession to something lower? We only started to see the I/O error two weeks ago We're not seeing the error in imap logs. Also there's no errors in the default log related to the users that receive this in http.
I'm planning on running a reconstruct -m in the mean time to see if that helps. There have been no changes to the server or application for quite some time. Any thoughts?

Yes, http can have the same issue. Yes, lowering the maxsessions from 6000 is the answer, IF it's the same problem. Likely, but not guranteed.
If you actually look at the store.idx for that particular user, what do you see? Is it near 2 gig? If so, then the user needs to either delete some messages or move some to another folder, as 2 gig is the limit for the store.idx file.....
jay

While signing a .XML file a message "cannot read the file for signing" is displayed. What is the solution.

An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
Ashish Goel

Ashish,
You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead.

Reading back file for analysis purposes controlling X-axis

Alright, I lose using labview. I use it for a ton of different projects at work. I have been fooling around with this for a while and maybe I am just missing it.
Here goes, in one of my applications I record 4 AI channels at various rates (6, 600, 6000) Hz, I write the data to three different files depending on the record speed. I create a .txt file using the "write to file" wizard. I check the option to use one time column. In the end I get a nice file with 5 columns the first being my time, and the other four being the data on the 4 AI channels.
Now I am trying to read this file back to graph and perform some analysis on it. I have tried this a few different ways, with using charts and graphs. My question is is there anyway to grab that first column and set it as my x-axis. Right now the x-axis really dosn't make much sense. Even if it graphed it as a sample number would be good. Any help would be greatly appreated.
Thanks
Chris

Hi Chris,
attached vi will read your data...
When you rename your txt to .lvm you may also use the "Read from measurement file" function. As I'm not using the dynamic datatype (DDT) (so far) I don't know how to separate the single signal from the output - but it is shown in the properties dialog...
"Spreadsheet string to array" is located on the string palette - like any other string function too
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Read_Data_LV85.vi ‏81 KB

Newbie question - How to read all files for a backup

Hello all,
I have two users on my iMac. I am an administrator and the other user is a Standard user.
From my account, I wish to run backup software that will backup the entire "User" directory. The problem I am having is that when I run the backup software (fyi: iBackup),
it complains that it cannot read the files in the other user's account.
I notice that when I browse to the other user's account, all the directories in their home folder are locked.
How can I run my backup software so that it can read all files in the User directory?
Thank you kindly!
Jeff
17" iMac Core Duo Mac OS X (10.4.6)

Hi kneecarrot !
I don't know if this will suit your needs, but one easy way of backing up other user's stuff is via the terminal . If you have an admin accountm just use:
sudo ditto -rsrcFork /Users /Volumes/"nameof_anotherharddrive"/Users
This will perform an identical clone of all your users home direcories for backup purposes. To restore the bkd'up files, just reverse the lines:
sudo ditto -rsrcFork /Volumes/"nameof_anotherharddrive"/Users /Users
ATTENTION: Be aware that it will restore the files to the exact structure and contents it was when backed up, erasing all new and modified files!! You may however copy just the files/folders you want to recover, e.g.:
sudo ditto -rsrcFork /Volumes/"nameof_another_harddrive"/Users/"usera"/Documents /Users/"user_a"/Documents
IMPORTANT: As with all terminal commands... be careful, think twice and double-check the syntax. You may want to test with non-critical stuff or demo user accounts first.
Good luck,
Michael
MacBook Pro Mac OS X (10.4.6) 2 Gig RAM

Read raw files for nikon d5200 camera

I have given up using raw files for several Nikon bodies such as the d5200 on Adobe software since Adobe no longer supports these files even with the updates that are supposed to support these files. I can open the raw files fine using Nikon software to work on them and then save them as a tiff or jpeg to be used in photoshop, but this seems rather time consuming plus I lose the advantage of working on raw files in Photoshop. You would think that a company like Adobe would make it easy to open raw files for all cameras. Some bodies like the Nikon d300 raw files still work fine on Adobe software.

ACR (Adobe Camera Raw) versions are specific to different versions of Photoshop.
According to this link on Adobe's website regarding supported cameras
The Nikon 5200 required at least ACR 7.3, but you need Photoshop CS6 to run ACR 7.3 It won't work with older versions of Photoshop.
Camera Raw plug-in | Supported cameras
You can download the latest version of DNG Converter and convert your 5200 files to DNGs that can then be opened in earlier versions of Photoshop.
Here is the link for Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.4
Here is the link for Mac: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
The DNG Converter only works on folders of files, don't try to select an individual file to convert, Choose the FOLDER.

How to read .db file for Data services in Linux Environment

Hi all,
Can anyone tell me how to read a .db file for SAP BODS 4.0 which got installed in Linux?
This is Urgent...

If we are talking about MS Access, AFAIK there is no native support of that format in SAP Data Services. You may try to find ODBC driver fot that.
Thank you,
Viacheslav.

Software to read chm file for bold 9780

Is there any software to read chm file in blackberry bold 9780? Please help I have a lot of books in that format......

Hey ahmedgamel,
Welcome to the BlackBerry Support Community Forums.
Please follow the steps in the following article on how to obtain and instasll language packs on the BlackBerry Smartphone: http://btsc.webapps.blackberry.com/btsc/KB13067
Thanks!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Running CS5 on a Macbook Pro. Will not read raw files for a new Canon T5i camera.Can update the current RAW?

Running CS5 on a Madbook Pro. Will not open RAW image files from a new Canon TRi camera. Can I update to latest RAW processor with current CS5, or must I update to CS6 on the MacBook?
Jack

ACR 7.4 is the one that will read T5i raw files and it is CS6 specific. You can upgrade for $200 Standard or $400 Extended in you need 3D support.
You can also see if converting your T5i files to .dng format will do just as well.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 7.4

Read spreadsheet file for Analog Out Profile using DAQmx

I am trying to read a .txt file in, then output the Analog out profile (Daqmx) vs. time. The first column is time is (ms) in .001 sec increments. The second column is the Analog out voltage I want to output. I want to read the profile in, and ouput the a Analog out voltage incrementing in .001 sec intervals (or whatever the time increments are in the .txt file). The problem I am having is, it reads in the whole file and outputs it in a fraction of a sec, instead of incrementing by the time. I attached a screen shot of what I have. Any help would be great. Thanks
Attachments:
screen shot read.jpg ‏75 KB

You are reading the timing but not doing anything with it. You've specified Analog Wfm 1Chan NSamp for the DAQmx Write but you did not create the waveform data type. Use the Build Waveform function on the Waveform palette and wire in your array to the Y (waveform component) input and the time interval to the dt input.
Message Edited by Dennis Knutson on 04-06-2006 08:56 AM
Attachments:
Build Waveform.JPG ‏6 KB

Dynamic read of file for File Port

As per our project requirement have to use File Port to pick a set of IDOC Flat files from a given directory. The File Port only allows us to pick a file with a specific given name and does not allow us to pull file with a pattern for .eg. We can pull a file abcd.txt but cannot pull something like abc.txt. Our requirement is to pull abc.txt using the File Port.
If anyone has any idea about this, or any past experience with File Port in this regard, then please respond at the earliest.
We have created the file port with follwoing parameters:
Unchecked the Unicode Format System Setting
For the Inbound File:
Function Module: EDI_PATH_CREATE_CLIENT_DOCNUM
Directory is: A valid directory path
File Name: abcd.txt

Hi,
According to me, while using the automatic syndication through ports, it is not possible to change the filename that IDOC flat file generates.
FTPS != Secure FTP (990)
FTPS should have SSH Port 22.
u can check on this:
Basic FTP Setup Instructions
refer this thread also
FTPS
Thanks & Regards!!!
Saurabh Goel

Read Xml file for Sender and Receiver Info

Hi
Is it possible to customize B2B to read Sender/Receiver/Document Information from the xml file which is supposed to be transmitted?
I do NOT the option to specify this information in channel configuration under file name since file name will not have this information.
But I am fine with writing any plug to set this information somewhere to achieve the same.
Regards
Punit

For outbound transactions, file name is the only option available currently if you are using Generic File internal listening channel. You may use any other transport like JMS/AQ/Fabric and partner and document information can be set in headers.
Can you let us know the complete use case?
Regards,
Anuj

SSIS- Reading Of File Name

Need to perform below steps while loading data into target table from access database file
Check if file exists in Folder (particular folder say c:\bin\file...)
If file does not exist ... exit
If file exists read CSV File for Y/N ( CSV file has value y or n only one column one row)
If CSV value = Y
Read the file name, up till "."
Load access data where entry type = AAA and populate an additional column of source type as the FileName before "."
If CSV value = N
Read the file name,up till "."
Load access data where entry type <> AAA and populate an additional column of source type
as the FileName before "."
I can understand how to check the value of csv file for y or n
How can we check the presence of file, read the name uptill '.' store it in variable and populate it as a column value
Any help or idea on the above
aak

Hi aakcse,
To check whether accdb file exists in the spepcified directory with wildcard in the file name, you can use the following code:
public void Main()
// TODO: Add your code here
string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::vStrFilePath"].Value.ToString(), "*.csv");
if (files.Length > 0)
Dts.Variables["User::vBolFileExist"].Value = true;
foreach (string file in files)
Dts.Variables["User::vFileName"].Value = Path.GetFileNameWithoutExtension(file);
else
Dts.Variables["User::vBolFileExist"].Value = false;
MessageBox.Show(Dts.Variables["User::vFileName"].Value.ToString());
Dts.TaskResult = (int)ScriptResults.Success;
Note: Assuming there is only one .accdb file in the folder, the script above assigns the file name of the .accdb file without extension to the String type SSIS variable User::vFileName.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

How to read multi files?

Hi !! Can anyone tell me the syntax of reading mulit txt files? Thanks. I only know how to read single file.
try
//Search file
System.out.println(" ");
System.out.println("Search file :");
File file = null;
String fileloc = "c:\\j2sdk1.4.1_06\\bin\\PAYMENT.TXT";
file = new File(fileloc);
//If Payment interface file exists
if (file.exists()) {
System.out.println("File exists !");
System.out.println("");
}

Hi!! How to read multi files (For example: dbExport1.txt , dbExport2.txt , dbExport3.txt ...... => dbExport*.txt) ?
I only know how to read a single file.
try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     conn = DriverManager.getConnection(url, userid, password);
stmt = conn.createStatement();
     if (conn != null)
     System.out.println("Connection to Database OK!");
// read it
BufferedReader br = new BufferedReader(new FileReader("c:\\document\\dbExport.txt"));
DataInputStream in = new DataInputStream(new FileInputStream("c:\\document\\dbExport.txt"));
String input;
String firstinput;
String secondinput;
int count=130;
int year=1955;
while ((input = br.readLine()) != null) {
firstinput = input.substring(0, 10);
secondinput = input.substring(10);
count = count + 1;
System.out.println(firstinput);
System.out.println(secondinput);
String insertStore1 = ("INSERT INTO AUTHORS " +
"VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
     System.out.println(insertStore1);
boolean result;
if (stmt.executeUpdate(insertStore1) == 1){
System.out.println("Insertion successful");
else{
System.out.println("Insertion failed");
br.close();
     stmt.close();
     conn.close();
}

Read EDS file for EtherNet IP

Similar Messages

Maybe you are looking for