Read LRAW field CLUSTD of table PCL2

Hi All,
I want to read LRAW field CLUSTD of table PCL2 .
Pls suggest me how to read it.
Regards,
Anuj

thanks,
But like STXL table for read LRAW data we use READ_TEXT fm.Is there also any FM by using this we can read PCL2 lraw data.
regards,

Similar Messages

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule. "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
 when 'SAVE_RK'.
 when others.
endcase.
endmodule. "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY B_QTY
1000 2000
3000 4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name. "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to read specific fields from BW table into ABAP?

Hi Experts,
Can someone help me how to use to FM: RFC_READ_TABLE to read specific fields from a BW table '/bic/zcust_chO01' which DOESN't EXIST IN ABAP.
I am getting an error in OPTIONS & DATA parameters.
Any help would be higly appreciated with points.
Thanks
Dan

Dan,
FM: RFC_READ_TABLE is a RF FM so by providing BW system's RF destination you can get the values from required table.
TRY this:
CALL FUNCTION RFC_READ_TABLE destination <BW_RF_destination>
Susanth.

How to read Editable field in a table

Dear friends,
i have a table with 5 columns( one column is editable field ( Amount column)) pls check the below screen shot, , its binded with an internal table , now i want to edit the amount columns ( for eg 100 ), could any one pls let me know how to capture the editable value ( ie 100 ), when i am trying to read amount field , i am getting the old value ( ie 15,000),
Thanks
Vijaya

Hi Laxmi,
I am able to read the values before edited and after editing. Code i have written is in the ONENTER action method. I have simply read the Table node values.
1. Applicaiton data
2. Values In Debugging mode by clicking on Enter button on the second row.
3. Edit second value and click on Enter
Regards,
Ravikiran.K

How to read RSRWBSTORE's CLUSTD field

Hi,
Can you please let me know how to read the CLUSTD(LRAW) field of RSRWBSTORE table.
So we can analyse the workbook.
Thanks in Advance !
Regards,
Vivek L

Hi,
Can you please let me know how to read the CLUSTD(LRAW) field of RSRWBSTORE table.
So we can analyse the workbook.
Thanks in Advance !
Regards,
Vivek L

Reg Significance of Field CLUSTD in MSTD TAble.

hi,
pls let me know the significance of the field CLUSTD which is of type LRAW and length 2886
in MSTD TAble.
Thanks in advance

Hi,
This CLUSTD field stored the data as long raw data, and as such can not be displayed directly from SE16.
And you can only store the data using EXPORT ... TO DATABASE or get the data back using IMPORT ... TO DATABASE.
Regards,
Lim...

How to Read data from a table which is defined as a field in another table

Hi
Iam working with FM: 'CUCB_GET_CONFIGURATION'
 Import parameter configuration as a table.
but configuration has another table as a field.
i want to read the inner table fields.
how can i read the table which is defined as field in configuration table.
Please try to give me a solution.
can i have the declartions too....
Thanks,
sri

Hi jonnakuti,
1. simple
2.
DATA : CONFG TYPE IBCO2_INSTANCE_TAB2.
DATA : WA TYPE LINE OF IBCO2_INSTANCE_TAB2.
3. just copy paste
4.
report abc.
TYPE-POOLS : IBCO2.
DATA : INSTANCE TYPE CUIB_CUOBJ.
DATA : CONFG TYPE IBCO2_INSTANCE_TAB2.
DATA : WA TYPE LINE OF IBCO2_INSTANCE_TAB2.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
EXPORTING
 INSTANCE = INSTANCE
IS_BUSINESS_OBJECT =
IV_MOMENT =
IV_WITH_DB_INSTANCE =
IMPORTING
IBASE =
 CONFIGURATION = CONFG
EO_CBASE_REF =
EXCEPTIONS
 INVALID_INPUT = 1
 INVALID_INSTANCE = 2
 INSTANCE_IS_A_CLASSIFICATION = 3
 OTHERS = 4
read like this
LOOP AT CONFG INTO WA.
ENDLOOP.
regards,
amit m.

Display read only field in table / form from another vo

i came across couple of scenarios where i had to bring a field in a table / from from other vo than on which most fields in table / form were based. in all cases i had to display the field from another vo as read only and there was only one record in other vo which was related to previous vo in table / form. for this i created a view accessor and created a soc with model driven lov. the problem with this is that first element alwasy shows blank in soc. how can i display the filled soc with first element populated and read only in this scenario. i tried alternatively with groovy expressions but other people in team said it is not good practice to use groovy expressions to fill fields in one VO from other VO. how can i acheive this requirement with soc component / lov / view accessors. is there any other alternative as well. jdev 11 1 1 5

1) in the attribute of the VO select the 'List of values' node and edit the list attribute you see there; in the dialog select the UI Hints tad and make sure the checkmark for the 'Include "no Selection Item' is off.
2) you can base a VO on to EO which are then joined via one or more attributes (association)
Timo

Batch reading request doesn't prefix field names by table name

A batch reading request doesn't prefix field names by table name and I've got a AmbigiousException which is normal because there is the same fields in the 2 tables.
The following code :
//call a ReadAllQuery and return a list of AffaireImpl
List<Affaire> listeAffaire = affaireDao.getAffaireCorrespondantes(lccJrd, lnaAnnee, lnaOrdre, lcNataffCode, lnaNoSuite);
for (Affaire affaire : listeAffaire) {
 //there is a one to Many mapping on Affaire to Dossier, with Transparent Indirection, Read-Ony and Batch Reading
 //this metod generate the wrong batch reading method
 List<Dossier> listeDossiers = affaire.getDossier();
generates the following requests:
ReadAllQuery(eu.curia.litige.model.AffaireImpl) --
SELECT * FROM LA_AFF WHERE ( ((LCC_JRD = 'C') AND (LNA_ANNEE = 8)) AND (LNA_ORDRE = 8))
ReadAllQuery(eu.curia.litige.model.DossierImpl) --
SELECT t0.*
FROM LA_DOSSIER t0, LA_AFF t1
WHERE
(((t0.LNA_NO_SUITE = t1.LNA_NO_SUITE) AND ((t0.LCC_JRD = t1.LCC_JRD) AND ((t0.LC_NATAFF_CODE = t1.LC_NATAFF_CODE) AND ((t0.LNA_ANNEE = t1.LNA_ANNEE) AND (t0.LNA_ORDRE = t1.LNA_ORDRE)))))
AND UPPER(LCC_JRD) = 'C' AND UPPER(LNA_ORDRE) = '8' AND UPPER(LNA_ANNEE) = '8')+
but the request should be :
SELECT t0.*
FROM LA_DOSSIER t0, LA_AFF t1
WHERE
(((t0.LNA_NO_SUITE = t1.LNA_NO_SUITE) AND ((t0.LCC_JRD = t1.LCC_JRD) AND ((t0.LC_NATAFF_CODE = t1.LC_NATAFF_CODE) AND ((t0.LNA_ANNEE = t1.LNA_ANNEE) AND (t0.LNA_ORDRE = t1.LNA_ORDRE)))))
AND t1.LCC_JRD = 'C' AND t1.LNA_ORDRE = '8' AND t1.LNA_ANNEE = '8')+
It's strange because this is the only place the batch reading doesn't prefix and uses a UPPER.
For now we have disabled the batch reading, but it decreases the performanes (the list of affaire can be hudge).
Any Idea?
We use TopLink 10.1.3 on a Oracle 10g Database.
Edited by: krampstudio on 2 déc. 2011 07:40
Edited by: krampstudio on Dec 7, 2011 11:57 AM

Here the mapping (I've also remove the tags of some of the direct mapping fields to simplify the reading)
 <opm:class-mapping-descriptor xsi:type="toplink:relational-class-mapping-descriptor">
 <opm:class>eu.curia.litige.model.AffaireImpl</opm:class>
 <opm:alias>Affaire</opm:alias>
 <opm:primary-key>
 <opm:field table="LA_AFF" name="LC_NATAFF_CODE" xsi:type="opm:column"/>
 <opm:field table="LA_AFF" name="LCC_JRD" xsi:type="opm:column"/>
 <opm:field table="LA_AFF" name="LNA_ANNEE" xsi:type="opm:column"/>
 <opm:field table="LA_AFF" name="LNA_NO_SUITE" xsi:type="opm:column"/>
 <opm:field table="LA_AFF" name="LNA_ORDRE" xsi:type="opm:column"/>
 </opm:primary-key>
 <opm:events xsi:type="toplink:event-policy"/>
 <opm:querying xsi:type="toplink:query-policy">
 <toplink:does-exist-query xsi:type="toplink:does-exist-query">
 <toplink:existence-check>check-database</toplink:existence-check>
 </toplink:does-exist-query>
 </opm:querying>
 <opm:attribute-mappings>
 <opm:attribute-mapping xsi:type="toplink:one-to-many-mapping">
 <opm:attribute-name>dossier</opm:attribute-name>
 <opm:read-only>true</opm:read-only>
 <opm:get-method>getDossier</opm:get-method>
 <opm:set-method>setDossier</opm:set-method>
 <opm:reference-class>eu.curia.litige.model.DossierImpl</opm:reference-class>
 <opm:target-foreign-key>
 <opm:field-reference>
 <opm:source-field table="LA_DOSSIER" name="LCC_JRD" xsi:type="opm:column"/>
 <opm:target-field table="LA_AFF" name="LCC_JRD" xsi:type="opm:column"/>
 </opm:field-reference>
 <opm:field-reference>
 <opm:source-field table="LA_DOSSIER" name="LNA_ANNEE" xsi:type="opm:column"/>
 <opm:target-field table="LA_AFF" name="LNA_ANNEE" xsi:type="opm:column"/>
 </opm:field-reference>
 <opm:field-reference>
 <opm:source-field table="LA_DOSSIER" name="LNA_ORDRE" xsi:type="opm:column"/>
 <opm:target-field table="LA_AFF" name="LNA_ORDRE" xsi:type="opm:column"/>
 </opm:field-reference>
 <opm:field-reference>
 <opm:source-field table="LA_DOSSIER" name="LC_NATAFF_CODE" xsi:type="opm:column"/>
 <opm:target-field table="LA_AFF" name="LC_NATAFF_CODE" xsi:type="opm:column"/>
 </opm:field-reference>
 <opm:field-reference>
 <opm:source-field table="LA_DOSSIER" name="LNA_NO_SUITE" xsi:type="opm:column"/>
 <opm:target-field table="LA_AFF" name="LNA_NO_SUITE" xsi:type="opm:column"/>
 </opm:field-reference>
 </opm:target-foreign-key>
 <toplink:batch-reading>true</toplink:batch-reading>
 <toplink:container xsi:type="toplink:list-container-policy">
 <toplink:collection-type>oracle.toplink.indirection.IndirectList</toplink:collection-type>
 </toplink:container>
 <toplink:indirection xsi:type="toplink:transparent-collection-indirection-policy"/>
 <toplink:selection-query xsi:type="toplink:read-all-query">
 <toplink:container xsi:type="toplink:list-container-policy">
 <toplink:collection-type>oracle.toplink.indirection.IndirectList</toplink:collection-type>
 </toplink:container>
 </toplink:selection-query>
 </opm:attribute-mapping>
 <opm:attribute-mapping xsi:type="toplink:direct-mapping">
 <opm:attribute-name>lccJrd</opm:attribute-name>
 <opm:field table="LA_AFF" name="LCC_JRD" xsi:type="opm:column"/>
 </opm:attribute-mapping>
 <opm:attribute-mapping xsi:type="toplink:direct-mapping">
 <opm:attribute-name>lcNataffCode</opm:attribute-name>
 <opm:field table="LA_AFF" name="LC_NATAFF_CODE" xsi:type="opm:column"/>
 </opm:attribute-mapping>
 <opm:attribute-mapping xsi:type="toplink:direct-mapping">
 <opm:attribute-name>lnaAnnee</opm:attribute-name>
 <opm:field table="LA_AFF" name="LNA_ANNEE" xsi:type="opm:column"/>
 </opm:attribute-mapping>
 <opm:attribute-mapping xsi:type="toplink:direct-mapping">
 <opm:attribute-name>lnaNoSuite</opm:attribute-name>
 <opm:field table="LA_AFF" name="LNA_NO_SUITE" xsi:type="opm:column"/>
 </opm:attribute-mapping>
 <opm:attribute-mapping xsi:type="toplink:direct-mapping">
 <opm:attribute-name>lnaOrdre</opm:attribute-name>
 <opm:field table="LA_AFF" name="LNA_ORDRE" xsi:type="opm:column"/>
 </opm:attribute-mapping>
 </opm:attribute-mappings>
 <toplink:descriptor-type>independent</toplink:descriptor-type>
 <toplink:caching>
 <toplink:cache-invalidation-policy xsi:type="toplink:time-to-live-cache-invalidation-policy">
 <toplink:time-to-live>30000</toplink:time-to-live>
 </toplink:cache-invalidation-policy>
 </toplink:caching>
 <toplink:instantiation/>
 <toplink:copying xsi:type="toplink:instantiation-copy-policy"/>
 <toplink:change-policy xsi:type="toplink:deferred-detection-change-policy"/>
 <toplink:tables>
 <toplink:table name="LA_AFF"/>
 </toplink:tables>
 </opm:class-mapping-descriptor>

Read dynamic field symbol Work Area before append to dynamic table

Hi experts:
I have a dynamic work area but before doing an append to the dynamic table, I need to do some validation on some fields of the work area in order to decide to append it or not, but I don't know how...
More or less this is the example
loop at so_kschl.
 field = so_kschl-low.
 if <t_dyntable>-field = 0. "if the value of this field in dinamic table is 0.
don't append
 else.
 APPEND <fs_dyntable> TO <t_dyntable>.
 endif.
endloop.
Thank you very much for your help.
Miriam

Check this example, you read the component of the dynamic work area and assign it to a field-symbols. In this case, I validate that the entry is always 'a'.
DATA: i_lvc TYPE lvc_t_fcat WITH HEADER LINE,
 i_table TYPE REF TO data,
 l_style TYPE lvc_fname,
 l_warea TYPE REF TO data,
 l_name(7) VALUE 'VARCHAR'..
FIELD-SYMBOLS: <fs> TYPE table,
 <fs2> TYPE ANY,
 <fs3> TYPE ANY.
PARAMETERS p_char TYPE c LOWER CASE.
START-OF-SELECTION.
i_lvc-fieldname = 'Varchar'.
i_lvc-inttype = 'C'.
i_lvc-intlen = 1.
APPEND i_lvc.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_lvc[]
IMPORTING
ep_table = i_table
e_style_fname = l_style.
ASSIGN i_table->* TO <fs>.
CREATE DATA l_warea LIKE LINE OF <fs>.
ASSIGN l_warea->* TO <fs2>.
<fs2> = p_char.
ASSIGN COMPONENT l_name OF STRUCTURE <fs2> TO <fs3>.
IF <fs3> = 'a'.
 WRITE: 'Component VARCHAR is a'.
* APPEND <fs2> TO <fs>.
ELSE.
 WRITE: 'Component VARCHAR is not a'.
ENDIF.

How to read table fields form a table having length of 7 characters

HI all,
could you please tell me how to read table fields from a table having length 7 characters, i have requirement that in my ztable i have 30 fields out of which 20 fields are location fields, i want to select 20 fields which have 7 characters length.
please could any body suggest me on this issue.
thanks,
sre.

hi,
try like this
create a data variable of type i as
data: len type i.
create internal table for 20 fields as
data:begin of itab,
           fld 1 type .......
        end of itab.
data:itab type itab1 occurs 0 with header line.
loop at itab2. // original internal table which all fields.
read table itab2 with index sy-tabix.
len = strlen (itab2-fld).
if len eq 7.
      move itab2 itab1.
      append itab1.
endif.
endloop.
if helpful reward some points.
with regards,
Suresh.A

Read contents of changing fields from internal table

Hi Folks,
Please help me in my query below:
Consider there is a Z-table with two fields TABNAM and FIELD having values KNA1 and NAME1 respectively.
In my report I have fetched entries for customers from KNA1. Now based on the field from Z-table I want to populate a variable suppose V_FREE_VAR with the value from KNA1 table.
Here V_FREE_VAR is of CHAR200 so that it accomodate all types of values from KNA1.
The value of Z-table FIELD can change daily i.e next day the value may be PSTLZ.
So how can I read the particular field from internal table as the field to be read is dynamic.
Note: using case is not feasible.
Thanks in advance.
Regards,
Shardul

@Hartmut P
As Rob said i want to get the value of the field from internal table. the code is something like this.
I_KNA1 contains records for customers.
Suppose values of Z-table are in internal table I_TEMP_TABLE.
Entries in I_TEMP_TABLE are as follows
TABNAME      FIELDNAME
KNA1                 NAME1
The value of FIELNAME in Z-table can be changed
Loop at I_TEMP_TABLE into WA_TEMP_TABLE.
Read I_KNA1 into WA_KNA1 with key KUNNR = '0001002234'.
IF SY-SUBRC EQ 0.
   CASE WA_TEMP_TABLE-FIELDNAME.
        WHEN 'NAME1'.
             V_VAR = WA_KNA1-NAME1.
         WHEN 'PSTLZ'
              V_VAR = WA_KNA1-PSTLZ.
ENDIF.
But using case is not appropriate as KNA1 contains 176 fields.

How to Pull Data From CRT table PCL2 Cluster

Hi,
I want to show a Report, below is the Fields in the Report
Descripton----
Table Name
Total Current Month Salary----
CRT table PCL2 cluster
monthly member contribution-----CRT table PCL2 cluster
Net difference in Pay----
CRT table PCL2 cluster
How to get the Data from the CRT table PCL2 cluster in BW
is there any procedure to get the payroll data in BW?
I think CRT table is a internal Table.
any good idea's will be appricated...
Thanks
Priya

Hi,
check whether is it populating when u call
Function Module - PYX X_READ_PAYROLL_RESULT .
If not Use this Marcro.
RP-IMP-C2-IN.
Call this macro and check EPF[ ].This marco will populate both RT and EPF.
Check transaction - PC00_M40_ EPF
Cheers,
Manoj.

Reagrding data in table 'PCL2'

Hi SAP Gurus,
I have exected the table PCL2 with the following values
RELID = IN
SRTFD = 0000028100996.
and got the following value in the field CLUSTD.
FF06010102028000313130300000000047450000121F9D02B77AEBE96DE3B8E2B3A424333195D289A24450202CDA48558A189EDD252912C8211445CA8C298A266945760D544913180272708244A9801EA436681B2007B768D006E82105021B70DB9C7CAC93EFE08BBF4EF7CD7BB3DA59BEE58ED85CF26CCDE3EECE6FDFDF999
Can anyone please tell the meaning of that,
Thanks and Regards,
Pavan.

Hi,
Please check this link for sap payroll
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/38a63a04227748e10000000a11402f/frameset.htm
PC00_M40_F16 this is for form 16 or try this pc00_m12_calc
Hope it helps.
Regards
Hiren K.Chitalia
Edited by: Hiren Chitalia on Feb 15, 2010 11:33 AM

Change the font color of a text field in a table by key-combination

I want to change the font color of a text field in a table (single cell only) on pressing a key combination. Does anybody know how to do this.
I have a lot of data in a table. During an evaluation of the data in a meeting I want to change the color of the text depending on the result of the meeting. (for example: High risk = CTRL+R makes the text red).
I know how to change the color using a button, but I do not want to add a button after each cell. For this reason I would like to do it on a key combination that alway refers to the active cell.
Many thanks for your help in advance.
Marcel

Hi,
I don't think you can use the ctrl key like that as those shortcuts will be intercepted by Reader (ctrl-R toggles the ruler display on / off). You also might have trouble updating the color while you still have focus on it. You can use the shift key in a similar way, so if you only have lower case characters in the text fields then you can do something like;
if (xfa.event.shift)
    switch (xfa.event.change)
        case "R":
            this.fontColor = "255,0,0";
            break;
        case "O":
            this.fontColor = "255,102,0";
            break;
        case "G":
            this.fontColor = "0,255,0";
            break;
    xfa.event.change = ""; // ignore character
If you need uppercase characters maybe you can have one button to set "review mode" and test that on the if (xfa.event.shift) line. But again it wont take effect until you have tabbed out of the field.
Regards
Bruce

Read LRAW field CLUSTD of table PCL2

Similar Messages

Maybe you are looking for