Read screen value ( CJ02 Status Value)

Hi All,
I am using BADI WBS_SETTLEMENT_RULE in CJ02. In BADI I have to use condition on status for WBS element. when the user will change status to REL I need to update settlement rule. can anyone tell me how to get status in CJ02 runtime?

I found that FM STATUS_TEXT_EDIT will give run time value for status
thanks.

Similar Messages

System error on reading screen values

Hi ABAP'ers!!
When I try to unblock the vendor account in FK05 (unblock in all company codes) I get an error :
System error on reading screen values
Message no. F2 109
Would appreciate your suggestions/inputs!!
Thanks for your time!

Hi VR,
in FK05 you cannot unlock vendor.through functionality only u can unblock the vendor.
It display error message.
For these changes ( for blocking / unblocking ) user exit will be triggerd.
Regards,
Narasimha

Read Screen values in Select options

Hi Experts,
              I am using FM 'DYNP_VALUES_READ' for reading the Screen values. The problem is, this FM runs fine for parameters where single value is returned but in case of Select-options where i have ranges, How to use this FM?
Help will be appreciated
Regards
Sourabh

Hi ,
Thanks for your valuable inputs.
I have acheived my requirements with FM 'DYNP_VALUES_READ' itself.
Here is how i have acheived this. I have passed both LOW and HIGH in the internal table it_fieldvalues.As a result i got both the values of the ranges.
REFRESH it_fieldvalues.
it_fieldvalues-fieldname = 'S_AEDAT-LOW'.
APPEND it_fieldvalues.
CLEAR it_fieldvalues.
it_fieldvalues-fieldname = 'S_AEDAT-HIGH'.
APPEND it_fieldvalues.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                         = sy-repid
      dynumb                         = sy-dynnr
    TRANSLATE_TO_UPPER             = 'X'
REQUEST                        = ' '
PERFORM_CONVERSION_EXITS       = ' '
PERFORM_INPUT_CONVERSION       = ' '
DETERMINE_LOOP_INDEX           = ' '
    TABLES
      dynpfields                     = it_fieldvalues
EXCEPTIONS
   invalid_abapworkarea           = 1
   invalid_dynprofield            = 2
   invalid_dynproname             = 3
   invalid_dynpronummer           = 4
   invalid_request                = 5
   no_fielddescription            = 6
   invalid_parameter              = 7
   undefind_error                 = 8
   double_conversion              = 9
   stepl_not_found                = 10
   OTHERS                         = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Sourabh

BDC read screen value and press button

Hi,
How can i read a screen value and press button by BCD??
Regards,
Kit

Hi ,
There is table bdcmsgcoll which holds the values so if do like below you can find out the values
data: it_tab2 type table of bdcmsgcoll with header line.
call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2.
now it_tab2 will hold the values and you can check that in debugging mode
do reward if helpful

In BDC we need to read screen value of table control

Dear All,
I was doing a feasibility analysis. One BDC is there where we will have to insert records in table control based on some records of 1st column of table control already populated. We are unable to find a way for reading table control. The BDC is generating batch input session. Can you please suggest on this?
Best wishes,
Atanu

Hi Atanu,
with BDC, the only possibility is to do as Klaus suggested: you must replicate the SAP's logic in your program, you must know in advance how SAP fills this field. This is a very well known drawback of BDC. You may use the SQL trace to help you to know which tables are read. Ask functional people to help you.
You may also use SAP GUI scripting, that's another technology (slower I think, and it can only work in dialog). It allows to do different actions between 2 screens. You must program it using OLE, or using external software (VBA for example).
Sandra

WAD template with BSP Application - how to read selection screen values

Hello,
I've created Web template with Web Application Designer (WAD).
I would like to extend that page with BSP Application...
Purpuse of this application is to read some information from tables
on BW transaction server and display them within Web page.
Question: How to read selection screen values from a Web template ?
Thanks for any help,
Pawel Borowiec

Hi,
The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
And once you get the inputfield Id, you can read the value in the InputField(InF) by
using the following code...!
data : if_value type ref to cl_htmlb_inputfield.
data : variable type string.
if_value ?= cl_htmlb_manager=>get_data( request = request
                                            name    = 'inputField'
                                            id      = 'InF_ID_here'
       if if_value->value is not initial.
         variable = if_value->value.
       endif.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

How can I get selection screen values from outside of program?

Hi. all.
Now. I'm developing moritoring systems and I have problems. for getting selection screen values in runtime. Is there any function, methods or structure to know this?
I'd like to get selection screen values while several programs working in runtime and update these values to table to show current system's status and input values for users in real time.
For example.
Now. 3 PGMs are working on systems.
each PGM is ZAAA01, ZAAA02, ZAAA03.
and ZAAA01 needs input parameter P01, ZAAA02 needs input parameter P02, ZAAA03 needs input parameter P03.
In this case, I have to know values of P01, P02 and P03.
The mornitoring systems will show current working status of PGMs(ZAAA01~03)' and these PGMs' input values.
As fas as I know, the structure 'SCREEN' can be used in each PGM for runtime. Is there any SAP system structure or something else for this purpose?
I hope your hopeful repsponse.
Thanks.

Umm..I need to explain more about this.
of course I know SET, GET PARAMETERS.
But I'd like to minimize coding for each PGM level.
I have over hundreds PGMs and I have to develop the PGM(including tables and structures) that mornitor
all of those PGMs on a report in real-time.
This PGM is kind of Process Manager.
First I should know dialogue job PGM and background job that pass parameters using SAP(ABAP) Memory.
And then I have to update those PGMs' input values via screens into tables in real-time.
So, I couldn't use SET,GET PARAMETERS for this PGM.
I want to know methods that can be used for getting information about runtime PGMs' selection screen field values in SAP systems wide.
Please help me some one knows this.

Short dump in reading selection values in Report

Hi all,
I have created a Navegational Attributte and added this Info Object in the existing Query and for this object we have created Charactistics Value Variable with Uesr Entry.
But, When we use input selection option to select a vlaue for this Variable in the Variable Selection Screen it is trying to read the values and going into short Dump but for other variables Selection option is working fine.
Please anyone help me if you have the solution.
Regards,
Ali.

Hi,
Try deleting the master data and reload the master data again and check for the selection variables. Check the short dump in ST22 it will say which master table ie SID table or master table where the join fails.
Thanks,
Arun

JOB_SUBMIT   with Selection Screen Value

I have a requirement :
with other select-options and parameters, i have two radio button, Foreground and Background:
when Background radio button will be selected program should be scheduled as a background job.
How i will pass selection screen value in JOB_SUBMIT ??
Cheers.
Srikanta

Hi ,
Try This
*& Report ZMMVB_PG_SL_CHANGE_BDC
REPORT zmmvb_pg_sl_change_bdc.
TABLES : mara,t133a,marc.
DATA i_t133a LIKE t133a OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
        matnr LIKE marc-matnr,
        werks LIKE marc-werks,
        ekgrp LIKE marc-ekgrp,
       END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
         matnr LIKE marc-matnr,
         werks LIKE marc-werks,
         dispo LIKE marc-dispo,
END OF itab1.
DATA : fname LIKE ibipparms-path ,
       ename TYPE string,
       mode.
DATA: BEGIN OF it_t133a OCCURS   0,
        bilds LIKE t133a-bilds,
        pstat LIKE t133a-pstat,
        guifu LIKE t133a-guifu,
        auswg LIKE t133a-auswg,
      END OF it_t133a.
DATA: ctr TYPE i,
       ctr_s(2) TYPE n,
       wrk(35),
       ch(1),
       viewno(2) TYPE n,
       guifu LIKE t133a-guifu.
DATA: BEGIN OF it_views OCCURS 30.
        INCLUDE STRUCTURE mbildtab.   " Selection Views
DATA: END OF it_views.
DATA bdc_data LIKE bdcdata OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-000.
PARAMETERS : ek RADIOBUTTON GROUP rg1 ,
             sl RADIOBUTTON GROUP rg1
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-001.
PARAMETERS : fg RADIOBUTTON GROUP rg2 DEFAULT 'X',
             bg RADIOBUTTON GROUP rg2.
SELECTION-SCREEN END OF BLOCK c.
START-OF-SELECTION.
IF fg = 'X'.
    mode = 'A'.
ELSEIF bg = 'X'.
    mode = 'E'.
ENDIF.
IF ek = 'X'.
    guifu = 'SP09'.
    PERFORM bdc_ekgrp_change.
ELSEIF sl = 'X'.
    guifu = 'SP12'.
    PERFORM bdc_mrpcontroller_change.
ENDIF.
*&      Form BDC_EKGRP_CHANGE
*       text
* --> p1        text
* <-- p2        text
FORM bdc_ekgrp_change .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = sy-repid
      dynpro_number = sy-dynnr
      field_name    = ' '
    IMPORTING
      file_name     = fname.
IF NOT ( fname IS INITIAL ) .
    ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = ename
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab[] IS NOT INITIAL.
    LOOP AT itab.
      REFRESH bdc_data.
      IF itab-matnr NA sy-abcde AND itab-matnr NA '/*-_.'.
        UNPACK itab-matnr TO itab-matnr.
      ELSE.
        TRANSLATE itab-matnr TO UPPER CASE.
      ENDIF.
      SELECT SINGLE * FROM mara WHERE matnr = itab-matnr.
      IF sy-subrc NE 0.
        CONTINUE.
      ENDIF.
      PERFORM view_routine.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-MATNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RMMG1-MATNR'
                                    itab-matnr.
      CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                      wrk.   "'MSICHTAUSW-DYTXT(08)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_field       USING   wrk "'MSICHTAUSW-KZSEL(08)'
                                      'X'.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-WERKS'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_field       USING 'RMMG1-WERKS'
                                    itab-werks.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BU'.
* PERFORM bdc_field       USING 'MAKT-MAKTX'
*                                '"HEX BOLT M16X1.5X100,B8.8,BP"'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'MARC-EKGRP'.
* PERFORM bdc_field       USING 'MARA-MEINS'
*                                'NOS'.
      PERFORM bdc_field       USING 'MARC-EKGRP'
                                    itab-ekgrp.
* PERFORM bdc_field       USING 'MARA-MATKL'
*                                '1702'.
* PERFORM bdc_field       USING 'MARC-USEQU'
*                                '3'.
* PERFORM bdc_field       USING 'MARC-KORDB'
*                                'X'.
      CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
    ENDLOOP.
ENDIF.
ENDFORM.                    " BDC_EKGRP_CHANGE
*&      Form BDC_MRPCONTROLLER_CHANGE
*       text
* --> p1        text
* <-- p2        text
FORM bdc_mrpcontroller_change .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = sy-repid
      dynpro_number = sy-dynnr
      field_name    = ' '
    IMPORTING
      file_name     = fname.
IF NOT ( fname IS INITIAL ) .
    ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = ename
      filetype                = 'DAT'
    TABLES
      data_tab                = itab1
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab1[] IS NOT INITIAL.
    LOOP AT itab1.
      REFRESH bdc_data.
      IF itab1-matnr NA sy-abcde AND itab1-matnr NA '/*-_.'.
        UNPACK itab1-matnr TO itab1-matnr.
      ELSE.
        TRANSLATE itab1-matnr TO UPPER CASE.
      ENDIF.
      SELECT SINGLE * FROM mara WHERE matnr = itab1-matnr.
      IF sy-subrc NE 0.
        CONTINUE.
      ENDIF.
      PERFORM view_routine.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-MATNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RMMG1-MATNR'
                                    itab1-matnr.
      CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                       wrk.         "'MSICHTAUSW-DYTXT(11)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_field       USING   wrk          "'MSICHTAUSW-KZSEL(11)'
                                    'X'.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-WERKS'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_field       USING 'RMMG1-WERKS'
                                    itab1-werks.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BU'.
*      PERFORM bdc_field       USING 'MAKT-MAKTX'
*                                    '"HEX BOLT M16X1.5X100,B8.8,BP"'.
*      PERFORM bdc_field       USING 'MARA-MEINS'
*                                    'NOS'.
*      PERFORM bdc_field       USING 'MARC-DISGR'
*                                    '701'.
*      PERFORM bdc_field       USING 'MARC-EKGRP'
*                                    'A00'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'MARC-DISPO'.
*      PERFORM bdc_field       USING 'MARC-DISMM'
*                                    'PD'.
      PERFORM bdc_field       USING 'MARC-DISPO'
                                    itab1-dispo.
*      PERFORM bdc_field       USING 'MARC-DISLS'
*                                    'MB'.
      CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
    ENDLOOP.
ENDIF.
ENDFORM.                    " BDC_MRPCONTROLLER_CHANGE
*&      Form bdc_dynpro
*       text
*      -->PROGRAM    text
*      -->DYNPRO     text
FORM bdc_dynpro USING program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro   = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
ENDFORM.                        "BDC_DYNPRO
*        Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdc_data.
bdc_data-fnam = fnam.
bdc_data-fval = fval.
APPEND bdc_data.
ENDFORM.                    "BDC_FIELD
*&      Form VIEW_ROUTINE
*       text
* --> p1        text
* <-- p2        text
FORM view_routine .
CLEAR viewno.
SELECT * FROM t133a INTO CORRESPONDING FIELDS OF TABLE i_t133a
                WHERE bilds = '21' AND guifu LIKE 'SP%' .
LOOP AT i_t133a .
    ch = i_t133a-pstat.
    IF mara-vpsta NA ch .
      DELETE i_t133a     .
      CONTINUE .
    ENDIF .
ENDLOOP.
SORT i_t133a BY guifu ASCENDING .
LOOP AT i_t133a .
    viewno = viewno + 1 .
    IF i_t133a-guifu = guifu .
      EXIT .
    ENDIF .
ENDLOOP .
ENDFORM.                    " VIEW_ROUTINE
Regards,

How to read the value of a field belonging to a different context node in GET_I method during runtime

I want the read the value of a field,'LCSTATUS' belonging to context node 'BTADMINH' in the GET_I method of the field, 'ZZFLD000008' belonging to context node,'ZBTACTIVITYH'.
In the context node class of context node 'ZBTACTIVITYH',I have created an instance attribute,GR_OWNER type ref to context class.
I get the following error in the line - lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ).
'An exception (CX_CRM_CIC_PARAMETER_ERROR) occurred Message no. TPDA430'
I have used the below code.
method GET_I_ZZFLD000008.
     DATA: current TYPE REF TO if_bol_bo_property_access,
           lv_act_status TYPE string.
     DATA:lr_entity TYPE REF TO cl_crm_bol_entity,
           lr_current TYPE REF TO if_bol_bo_property_access,
          lr_parent TYPE REF TO cl_crm_bol_entity.
     rv_disabled = 'TRUE'.
     if iterator is bound.
       current = iterator->get_current( ).
     else.
       current = collection_wrapper->get_current( ).
     endif.
CHECK gr_owner IS BOUND.
lr_entity ?= gr_owner->btadminh->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ). "error states that lcstatus can't be used here.
   TRY.
         IF current->is_property_readonly(
                       'ZZFLD000008' ) = abap_false. "#EC NOTEXT
           rv_disabled = 'FALSE'.
         ENDIF.
     CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
           cx_crm_genil_model_error.
       RETURN.
   ENDTRY.
endmethod.

Hi,
LCSTATUS is not an attribute of the BTADMINH structure. It is read using the relation to the status object
BTADMINH-> BTHeaderStatusSet-> BTStatusHCurrent-> ACT_STATUS.
Try reading the ACT_STATUS of object BTStatus as given below.
        data: coll   type ref to if_bol_entity_col.
       data: entity type ref to cl_crm_bol_entity,
                     lv_act_status TYPE string.
       entity ?= current.                                                               "BTADMINH entity.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTHeaderStatusSet' ).    "#EC NOTEXT
       current = coll->get_current( ).
        entity ?= current.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTStatusHCurrent' ).     "#EC NOTEXT
       current = coll->get_current( ).
        try.
       lv_act_status = current->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'ACT_STATUS' ).
         catch cx_crm_cic_parameter_error.
       endtry.
Regards JP

Hiding a table column and its contents yet reading the values

Hi all,
hope someone can help as i urgently need a solution for this although its probably more of a javascript and html forms question than a JSP - but i couldnt find a good javascript forum - if any one has come across a good JS and HTML - i would appreciate if you would let me have a url for it - in the meantime as i need this urgentely and most JS sites that i have visted and posted on seem to be useless, i havent got a reply back yet , and since i've always found java sun forum good and helpful thought would post it here - hope no one minds it too much . Thanks in advance for any help with resolving my urgent problem.
overview of question:
I need to, using an onclick() event read the contents of the 4th cell in the clicked row and set the value of a hidden element � (not sure what element to use here attribute tag? Or some other - but basically, this needs to also be hidden, as I�m going to use this as one of the parameters to send through as part of the form - )
explanation of question
So when I do :-
<td><netui:label value="{container.item.TELECARERID}"/></td> And using javascript :-
row.cells[4].innerText;I can read the value and print it to screen as :-
alert('row.cells[4].innerText)) = ' + row.cells[4].innerText);although at this stage I�m not sure how to now set this value to an element in the form so that I can include this value as part of the submit action of the form.
However when I do the following, which is closer to what I�m trying to achieve (ie hide the 4th column of the table and its values � but when I just hide the value as in:-
<td><netui:hidden dataInput="{container.item.TELECARERID}" dataSource="" /></td> I can�t use the above (row.cells[4].innerText;), javascript syntax to get to the value although the value is still in the viewsource of the html page.
How can I hide this forth column of the table yet get the values of the 4th column and also set it to some element of the form so that it can be submitted with the date range as part of a criteria to search against by the backend server.
the full code (well... relevant parts)
Here is all the code:
<table id="table1" class="tablebody" border="1">
        <tbody>
         <tr>
           <th><rpb:columnHeader field="FIRSTNAME"><i18n:getMessage messageName="first_name"/></rpb:columnHeader></th>
           <th><rpb:columnHeader field="LASTNAME"><i18n:getMessage messageName="last_name"/></rpb:columnHeader></th>
          <th><rpb:columnHeader field="LOGONNAME"><i18n:getMessage messageName="logon_name"/></rpb:columnHeader></th>
          <th><rpb:columnHeader field="TEAM"><i18n:getMessage messageName="team"/></rpb:columnHeader></th>
           <th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>
        </tr>
       </netui-data:repeaterHeader>
       <netui-data:repeaterItem>
        <tr bgcolor="#FFFFFF" onMouseOver="this.bgColor='gold';" onMouseOut="this.bgColor='#FFFFFF';" onclick="selectTeleCarer(this)">
        <td><netui:label value="{container.item.FIRSTNAME}"/></td>
          <td><netui:label value="{container.item.LASTNAME}"/></td>
         <td><netui:label value="{container.item.LOGONNAME}"/></td>
       <td><netui:label value="{container.item.TEAM}"/></td>
        <td><netui:label value="{container.item.TELECARERID}"/></td>
       </tr>
      </tbody>///////and then I�m trying to using the below sepertaely printed javascript set it to the below hidden attribute so that it can be submitted as part of the form
<netui:hidden tagId="teleCarerId" dataSource="{actionForm.teleCarerId}" dataInput=""/>
                             <div>
                         <i18n:getMessage messageName="created_between"/>
                            <netui:textBox tagId="data" dataSource="{actionForm.fromDate}"/>
                            <button id="trigger" onclick="jscalendar/calendar.js">...</button>
                           <i18n:getMessage messageName="and"/>
                            <netui:textBox tagId="data1" dataSource="{actionForm.toDate}"/>
                            <button id="trigger2" onclick="jscalendar/calendar.js">...</button>
                        </div>
                <br />
                <netui:button value="Submit" type="submit"/>
            </netui:form>/// the java script is :-
function selectTeleCarer(row)
    if ( row.style ) {
row.style.backgroundColor = ('gold' == row.style.backgroundColor)?
'white' : 'gold';
//document.form.teleCarerId.value = row.cells[4].innerText;
alert('row.cells[4].innerText)) = ' + row.cells[4].innerText);
}

thanks for the reply,
but i cant use just html like <input type hidden > as i'm using the struts like framework with the netui tags in weblogic where i need to link the tag value to the form bean to be passed to the server . thus i need to use the netui tag , which doesnt have a name but a tagId instead, so i'm using it like this :
<netui:hidden tagId="teleCarerId" dataSource="{actionForm.teleCarerId}" dataInput=""/>and then in javascrpit doing:
//document.form.teleCarerId.value = row.cells[4].innerText;but thats not my problem ()as it probably will work and its only an issue after i resolve the first part of my question:-
which is how do i hide a cloumn in a table and its values so that when the user selects a row i can pass the hidden value of row as part of my form .
as i mentioned before when i make the cloumn visible as in
<th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>and give it a visible value:
<td><netui:label value="{container.item.TELECARERID}"/></td>
       </tr>i can pick up the value fine using the javascript syntax:
row.cells[4].innerText;however when i hide only the value - which is only part of what i want to do as i want to also hide the column heading so that this part of the table isnt seen- as in:-
<td><netui:hidden dataInput="{container.item.TELECARERID}" dataSource="" /></td>then i cant use
row.cells[4].innerText;to pick up the value although it does hide the value and in viewsourec the value is there - is there some other syntax that i should be using here - and also how can i hide the cloumn heading so that the table looks asthtically good on the browser?
ie. what should i change this line of code to?
<th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>thanks in advance for any help.

For new entries pass input screen values to PBO of maintenance view

For maintaining Z table using a customized program with selection screen and FM   'VIEW_MAINTENANCE_CALL' is called . Its working fine for selecting existing entries as per selection screen values. In case if there is no entry found as per input values the maintenance screen comes blank with "No entries found that match selection criteria".
Instead of this want to pass input screen values on maintenance view if no entry is found thru PBO selection screen. The total & extract tables are empty. No suitable event is found. How this can be done.
Thanks
pt

You could try in a first step to read database to check existence :
CALL FUNCTION 'VIEW_GET_DATA'
EXPORTING
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist
    data        = data
EXCEPTIONS
    OTHERS      = 1.
If data found, call the view maintenance
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    action      = 'U'
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist.
else create one new record providing required value in a work area
CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
    EXPORTING
      action               = 'INS'
      view_name            = 'ZXXXX'
      insert_key_not_fixed = ' ' " if full key provided
      no_transport         = 'X'
    TABLES
      dba_sellist          = it_sellist
    CHANGING
      entry                = wa_zxxxx
    EXCEPTIONS
      OTHERS               = 1.
Regards,
Raymond

How to find out the Batch job selection screen values

Dear Users,
One of our users has set up a Batch job by manually entering values into the Selection screen of a report instead of picking up a Variant. We would like to know the values entered on selection screen since the job has failed and the user doesn't remember the selection screen values entered.
Can anyone please advise if there is a way we can figure out the selection screen values entered?
Thanks,
Vijay

Hi,
You can debug your failed job by going to 'SM37', type in 'JDBG' in the command line ( no '/' ), put the cursor on the job and press enter - will take you to the job in debug mode.
You can do this only after the job has finished execution. This will simulate the exact background scenario with the same selection screen values as used in the job.
So type in the transaction code 'JDBG' and place your cursor on the job after It has finished. It will take you to a SAP program in debug mode. Step through this program which is about 10 lines, after this your program will be executed in the debug mode.
Check the selection screen values.

Screen values are not retained in Tcode BP, onclick of SAVE button

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.

OSS Note 1254214 is applied and it is solved.

Read the value of user input variable during calculation of virtual char

Hello
Virtual characteristics is populated in custom BAPI based on values specified by user in the variable screen.
How to read the value of user input variable outside the user exit for custom variables?
The one way is to create faked user exit variable, read the value of user input variable in corresponding FM and insert it into table. Then value of this variable will be derived from the table.
Thanks

no answer

Read screen value ( CJ02 Status Value)

Similar Messages

Maybe you are looking for