READ UNCOMPLETE DATE FROM SESSION ATTRIBUTE
i have servlet read from DB and set result at vector and put it in session attribute to jsp that read it and print it
but this view does takes 10 sec on my computer
and on hosting server
it shows date un complete what is do you thing it wrong
i have servlet read from DB and set result at
vector Vectors are normally discouraged because they're Synchronized.
Why don't you read the ResultSet in an ArrayList Collection instead?
and put it in session attribute to jsp that
read it and print itInstead of putting the ArrayList of results (or in your case Vector) into the Session, you could store it in the HttpRequest attribute instead.
HttpRequest attribute has an advantage over HttpSessions
1) The Request Attribute is available through the scope of the Request
But the session attribute can expire at any time. The session attribute will not work if the page gets cached by the browser.
but this view does takes 10 sec on my computer
and on hosting server If it is taking that long you may want to optimize your JDBC code.
1) Use Connection Pooling
2) Prepared Statements
3) RowSet
4) Check the SELECT statement
it shows date un complete what is do you thing it
wrongHard to say without looking at the code.
Similar Messages
-
Hi all,
I have a requirement of reading JSON data from a particular URL and using one of the value to set one property in iView. I need some info on how to get JSON data from a URL and extracting attribute's value from it.
What are the APIs that can be used for this?Can anyone provide a solution/working example in Java for this?
I am working on EP 7.3.Hi Tarun,
JAXB should work for you. Take a look at this example:
JAXB JSON Example | Examples Java Code Geeks
Regards,
Tobias -
Hi all,
Can i read the Data from more than one Dataset at a time ?
If yes.. How ? If not...Why ?
Thanks in Advance
Krish...You can open up to 100 datasets at the same time for every internal session.
For stability, put a TRY...CATCH...ENDTRY on these exceptions:
CX_SY_FILE_OPEN
CX_SY_TOO_MANY_FILES
...like this:
TRY.
OPEN DATASET sapfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
[your code]
CATCH: cx_sy_file_open,
cx_sy_too_many_files.
ENDCATCH.
CLOSE DATASET sapfile.
Hope this helps. -
Raw Read Error Rate, Errors occurred while reading raw data from a disk
hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
MohammadHello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
How to read a data from USB port using JAVA
hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself?? -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to read the data from excel file and store into the table?
Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
ThanksHi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu. -
Regarding reading the data from spool
Hi Experts,
How can i read the data from spool?
I need to read the data from the spool and should display on the screen?
Is there any FM to read the data from spool?
Sruthi.hi please use this..
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
EXPORTING
rqident = v_spool
TABLES
buffer = it_spool
EXCEPTIONS
no_such_job = 1
not_abap_list = 2
job_contains_no_data = 3
selection_empty = 4
no_permission = 5
can_not_access = 6
read_error = 7 -
Regarding reading the data from the files without using Stremas
hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.RamakrishnaSimply put, you can't.
By why do you need to? -
Reading aggregated data from a cube/multiprovider
Hi BI people
My project is currently looking for a functionmodule that reads aggregated data from a cube/multiprovider.
I already have a functionmodule that reads data from a cube and returns it in a flat format. I have debugged this, but have not found any flags that can enable the OLAP functionality needed to perform the aggregation. The functionmodule is "RSDRI_INFOPROV_READ_RFC".
The situation is that I need to apply the aggregation logic of a profit center hierrarchy to the data I read from RSDRI_INFOPROV_READ_RFC, this means manually replicating the the OLAP engine functionality (keyfigure aggregation exception, ect.) and this is not an option with the available time/budget.
Please have a look at the example below:
Say that I have a profit center hierarchy as displayed below (with postable nodes).
PC1 - $10
|---- PC2 - $30
|---- PC3 - $20
The data I'm getting back from the functionmodule RSDRI_INFOPROV_READ_RFC looks like this:
PC1 $10
PC2 $30
PC3 $20
But I need the data aggregated. An aggregation utilizing the hierarchy above will make the data look like this:
PC1 $60
PC2 $30
PC3 $20
Instead of building an aggregation program, it would be usefull if it was possible to extract aggregated data.
Any comments appreciated.
Regards
MartinThx Olivier,
The problem is that I need a functionmodule that can apply the OLAP aggregation for a hierarchy to the data outpu from RSDRI_INFOPROV_READ_RFC.
... or the best alternative would be if there were a fm/class that could provide me with the hierarchy aggregation of the data.
/Martin -
Reading the data from BLOB column
HI,
I have a table with following structure
Test_Mail(Attachment BLOB,Attachmentname varchar2(255),FileSize number)
The data in the table is like
Attachment|Attachmentname|FileSize
BLOB|test.txt|1236
I wants to read the data from the BLOB attachment in to new file.
can any one help me in doing this with plsql??
Thanks in advance,
Balaji tk.
Edited by: Balaji.tk on Jan 9, 2011 9:28 PMMay be something like this ?
DECLARE
l_file UTL_FILE.FILE_TYPE;
l_buffer RAW (32767);
l_amount BINARY_INTEGER := 32767;
l_pos INTEGER := 1;
l_blob BLOB;
l_blob_len INTEGER;
BEGIN
-- Open the destination file.
l_file := UTL_FILE.FOPEN ('TEST_DIR', v_attachment_name, 'wb');
--This v_attachment_name can be selected from your table.
-- Get LOB locator
FOR rec IN (
SELECT attachment l_blob
FROM test_mail
--Your where condition to find the row.
--AND ROWNUM =1
LOOP
l_blob_len := DBMS_LOB.getlength (rec.l_blob);
-- Read chunks of the BLOB and write them to the file
-- until complete.
WHILE l_pos < l_blob_len
LOOP
DBMS_LOB.READ (rec.l_blob, l_amount, l_pos, l_buffer);
UTL_FILE.put_raw (l_file, l_buffer, FALSE);
l_pos := l_pos + l_amount;
END LOOP;
commit;
END LOOP;
-- Close the file.
UTL_FILE.FCLOSE (l_file);
EXCEPTION
WHEN OTHERS
THEN
-- Close the file if something goes wrong.
IF UTL_FILE.IS_OPEN (l_file)
THEN
UTL_FILE.FCLOSE (l_file);
END IF;
RAISE;
END; -
Reading the data from one component view into another component view
Hi All,
I have requirement to read the data from one component into another component while creating the service order. Here are the details.
Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
Refer the attachments for the component link..
Please let me know how we can achieve this one..
Thanks,
Sapsar.Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
Below is the correction code
IF iv_index IS NOT INITIAL.
lr_iterator ?= collection_wrapper->get_iterator( ).
lr_current ?= lr_iterator->get_by_index( iv_index ).
lr_entity ?= lr_iterator->get_by_index( iv_index ).
ELSE.
lr_current = collection_wrapper->get_current( ).
ENDIF.
*loop back to root entity
WHILE lr_entity->get_name( ) NE 'BTAdminH'.
lr_entity = lr_entity->get_parent( ).
ENDWHILE.
*Get the related entity
IF lr_entity IS BOUND.
lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
IF lr_collection IS BOUND.
lr_orgset_m = lr_collection->get_current( ).
* lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
ENDIF.
ENDIF.
Thanks,
Sapsar. -
Reading the data from XML Source
Hi
i want to read the data from XML source file, and update the transaction information to another XML file. how we can do this in ADF, please help
Thanks
nidhiyou may use normal Java API to do that
http://www.javablogging.com/read-and-write-xml/ -
Reading the data from excel file which is in application server.
Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma ReddyHi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy
Maybe you are looking for
-
Sapscript: How to place a Picture on a dynamically position ?
Hi I would like to place a Picture(Signature) an any place in the main window, is there a solution for that problem ? thanks a lot !
-
Is a TSU NOTIFICATION sufficient for encryption documentation?
I'm using an open source library for my encryption. Can I just upload my TSU NOTIFICATION as proof that I've notified BSI / NSA for the encryption documentation?
-
Hi, I have created in Mapbuilder the necessary Themes, BaseMaps and MapTile Layers for using in OBIEE. These are available in OBIEE and I have configured them in the Administration page of OBIEE Analytics. I have done this in an installation that has
-
How do we maintain concessions
Hi all, Iam new to this forum and need some information. In Indian scenarios how do we maintain the caste of a student and the fee concessions based on the caste he blongs.How can we maintain the reservation of number of seats for different castes. P
-
[Solved]Tray invisible in kdemod 4.2
My tray icons were invisible in kdemod 4.1. I hoped that this would be fixed in 4.2. but they still are invisible. When i drag the widget onto desktop they are visible. Last edited by abhinandh (2009-02-02 03:08:35)