Read User Attributes Windows NT

Hey
I should read user atributes in the Windows NT and the Windows 2k AD domain. With the W2k AD domain it works fine. But how can I connect the Windows NT Domain for reading the atributes?
Thanks for your help.

JNI == Java Native Interface.
You need to write C or C++ code which provides a bridge between the Windows specific library calls and objects (in this case Windows NT Authentication/Authorisation) and Java.
I suggest you start looking for help in the Native Interface forum.

Similar Messages

Possible to read user's Windows logon security information into my program?

I like to write a reservation program for serial number booking, and I was wondering if it is possible to record user information based on their Windows logon?

String userid = System.getProperty("user.name");That gives you the user ID which is currently signed on to the computer where the code is running. That may or may not help depending on the architecture of your application.

Read only attributes turned on by Windows 10

Two days after installing Windows 10, all of my data files are suddenly read only. I cannot save any files. I went to setting, turned the read only attribute box off, and the system seemed to be turning them all of. At least it ran through the entire data directory file by file. When I went to open a file in my word processor, it came up as read only, and of course I could no longer save the file junder anyu name. A check of the attribute box in settings showed that read only had been turned on. This makes the entire system useless and puts me out of business. Fortunately I still have my old XP netbook so I can continue working, albeit at a much slower pace.

By default, OU1 is mapped to directory attribute "ou". It's not modifiable via calendar. You could use the other OUs attribute (OU2-OU4) for this purpose.
-rtan

How to remove "Read Only" attribute on folders

Hi
I am logged in with my User account which has full control over my folders.<o:p></o:p>
I have a folder that I tried to add modifications to, however i could not do so because the folder was classified as read only. I have full permissions to this folder. Previously the app that
uses this folder could write to it quite happily, but today it fails. <o:p></o:p>
The 'attributes' for the folder shows a solid square in the read-only box. If I 'un-box' the read-only and apply > ok, when I look at the attributes again the box is still checked.<o:p></o:p>
So my question is, if it's not (which it shouldn't be) some sort of protected Windows folder, and I have full permissions on the folder (supposedly), why does Windows not respect my wishes,
get out of the way, and let me set it to what I want it to be?<o:p></o:p>
I have tried the following methods to fix this issue, but none of them work:<o:p></o:p>
-Adjusting permissions and control, and changing security options<o:p></o:p>
-Using a third party application such as "clear read only" to remove the check on the box<o:p></o:p>
-Using the "attrib" function on the CMD prompt<o:p></o:p>
-Boot Scan for virus/malware that is affecting folder attributes<o:p></o:p>
-Running applications and CMD as administrator<o:p></o:p>
I have heard that if using a NTFS harddrive, then all folders will be automatically “Read Only” and that it is impossible to change that attribute. I find this hard to believe, as all folders
should have some way of being modified, regardless of what HDD I’m using. I obviously cannot change to FAT32, so how else can I get my folders to get rid of this ridiculous error!
<o:p>I have also noticed that this problem is very common amongst Windows users. If this problem has been around for a while, how is it possible that no solution has presented itself.
Regardless, we need a solution to it, because i can't do the things i need to while the Read Only attribute remains a constant on my folders. I thought it may be a virus, but my avast anti-virus did not pick up any infected areas when the scan was done. I
have searched the internet, and no "fix" has solved this issue. The only fix i have not found is a reg edit that could completely remove this read only attribute from all folders. Though i feel this is not neccesary, as i only need the attribute
to be removed from certain folders. Please kindly assist me with this issue, hopefully it will help many others too...</o:p>
Many thanks.

Have you taken ownership of the folder? Please first take ownership of the folder, then change the security options
Take Ownership of a File or Folder
http://technet.microsoft.com/en-us/library/cc753659.aspx
If you have already did this, then run a scan with this tool,
Malicious Software Removal Tool
http://www.microsoft.com/en-in/download/malicious-software-removal-tool-details.aspx
or copy this folder to another location, test again.
Regards
Yolanda
TechNet Community Support

Lifecycle issue with table binding + read-only attributes: ADF BUG

Hello all,
I have found what I believe to be an easily reproducible bug in ADF that reproduces in 10.1.3.x, but not in 11g (at least not in drop 6). The best way to describe the bug would be to walk through a simple set of steps to reproduce the bug:
1). Create a new application (ADF BC + ADF Faces).
2). In the model project, create a new Entity Object from the Employee table in the default HR schema. Allow JDev to create an updatable view object and an AM as well.
3). Put a validation rule on the first name attribute of the EO (can be anything, really - I made mine so that the first name cannot be "foo").
4). Test everything using the BC tester if you like.
5). In the UI project, create a new JSPX page.
6). Drag the updatable VO on to your page as an updatable af:table.
7). Put an af:commandButton on the page. Bind its Action or ActionListener to a method in a new backing bean. Put some simple code (I used System.out.println) in the backing bean method.
8). Run the jspx page.
9). Put some invalid data in (e.g. "foo" in the first name field) and click the af:commandButton. Verify that you get an error message and that the Action/ActionListener method DOES NOT fire. So far, so good.
10). Now, to demonstrate the problem. First, look at the page definition for the jspx file. Identify the first attribute that is mentioned (in my case, it was the employee id).
11). Go to the updatable view object and make the attribute from #10 read-only or updatable when new only.
12. Now, repeat step 9 - you should see the error message AND also see that the Action/ActionListener method was executed. You will also see in the messages window that ADF attempted to set the value of the read-only attribute, and thus got a ReadOnlyAttrException.
This issue only happens if the first attribute mentioned in the table binding is read-only. A workaround would simply be to re-order the attributes in the table binding of the pagedef so that the first attribute isn't read-only.
Don't ask how I figured this out ;)
Best,
John

Hi Frank,
Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
John

Read context of window in componentcontroller

Hello colleagues,
we have the requirement to read an application parameter (user_id) from an iView in our WDA-component. I followed the steps provided in this thread :
Webdynpro ABAP url-parameters
Now I'm able to read the context of the correponding user-attribute of the window in method handledefault. Furtherone we would like to use the userid in the componentcontroller but currently I got stucked by reading the context in a method (f.i. wdoinit) of the componentcontroller even I mapped the context of the window in the componentcontroller. Is there a limitation that the context of a window can not be read in the componentcontroller?
Thanks in advance
Michael

Hi,
If u have an attribute and u can read by this code from the component controller in any method u create
wdThis.wdGetContext().currentContextElement().getAttributeAsText(IPrivate<View Name>.IContextElement.<Attribute name>);
To pass parameter between applications follow this thread
interapplicationnavigation:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial%20on%20inter-application-navigation%20-%2015.htm
Regards,
Vijayakhanna Raman

Reading multivalued attribute

Hi,
I have a multivalued attribute defined in LDAP and was synchronized to plumtree. After synchroinzation, the attribute with multiple values came in to plumtree and I am able to see the values of the attribute by clicking on user profile. But when I try to read the attribute using the following query only the last value is coming up.
Here is the query I am using.
IPortletContext portletContext = PortletContextFactory.createPortletContext(request, response);IPortletRequest portletRequest = portletContext.getRequest(); out.write("locationString = " + portletRequest.getSettingValue(SettingType.UserInfo,"ttcmytlocation"));
In the profile of the user ttcmytlocation attribute has multiple values, but reading returns only the last value. Is there any other way to query the values? Please help!!
Thanks.

Use LDAP is ticked but no server specified
Tried Selecting the server but no effect
Every where I look in POA, Domain setting its set to the SERVER's IP address
not DNS name!!
Copied NAMED.NLM (just the NLM) from SP5 server - error gone but still get
the LDAP error 81 when a
user tries to login to GW.
I also POA > Security - I tried setting security to LOW (which unticks LDAP)
but still can't login
"Anders Gustafsson" <[email protected]> wrote in message
news:[email protected]..
> Eric,
>> "Starting eDirectory integrated Novell DNS Server...
>> error:NWDSRead Failed while reading a multivalued attribute: -603
>> Loading the configuration and zone data completed .
>> DNS Server running "
>>
> OK. I assume that you have configured your POA to use the same server for
> LDAP. If so, did you use the DNS name or IP address? If DNS name, I
> suggest you try IP address as this takes DNS out of the picture.
>
> The error you are seeing indicates that you are not current on servicer
> packs:
> http://www.novell.com/support/search...200%2043955231
>
> I suggest you apply SP6 plus the post SP6 fixes after resolving your POA
> issue and reading this:
> http://wiki.novell.com/index.php/Nw65sp6
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2600
>

How to get user attributes from LDAP authenticator

I am using an LDAP authenticator and identity asserter to get user / group information.
I would like to access LDAP attributes for the user in my ADF Taskflow (Deployed into webcenter spaces).
Is there an available api to get all the user attributes through the established weblogic authenticator provider or do i have to directly connect to the LDAP server again?
Any help would be appreciated

Hi Julián,
in fact, I've never worked with BSP iViews and so I don't know if there is a direct way to achieve what you want. Maybe you should ask within BSP forum...
A possibility would be to create a proxy iView around the BSP iView (in fact: before the BSP AppIntegrator component) which reads the user names and passes this as application params to the BSP component. But this is
Beginner
Medium
Advanced
Also see http://help.sap.com/saphelp_nw04/helpdata/en/16/1e0541a407f06fe10000000a1550b0/frameset.htm
Hope it helps
Detlev

Sharing between Users on Windows

OK, I checked this page out from Apple, http://support.apple.com/kb/HT1203, to try and help me figure out why Itunes doesn't seemlessly work across users on Windows 7 (or Vista, or Mac, etc). I followed the directions and it either doesn't work or I'm just not getting it.
My goal is to use the Administrator user to manage itunes and that all other users will have access to itunes and the library created in the admin user account. Or simply, I want to be able to open itunes in any account and it matches whatever I've done in th admin account.
The fact this doesn't work as a matter of standard operations is confounding.

Finder > help menu. Enter file sharing!
"Sharing files with others who use your computer
You can share files with others who use your computer by placing the files in the Public folder in your home folder. Anyone with an account on your computer can read or copy the items you put in your Public folder (except for your Drop Box folder, which only you can open).
To share files using your Public folder:
Copy the files you want to share into your Public folder, inside your home folder.
To give a copy of a file directly to another person, copy it to their Drop Box folder (inside their Public folder), where only they can see it.
Related Topics
Sharing files with others using a drop box"

How can I authenticate a User In Windows Active Directory?

I need to authenticate a user in Windows Active Directory, but I found use the code below will return true if the user name and password are both correct and false if one of them is wrong. But when I input a user name which is not exist in Active Driectory with a blank password, it will also return true. What shall I do? Ask every user must input a password withnot blank?
Please give me some help to solve this problem. Thanks a lot.
Code:
private Context ctx = null;
Hashtable env = new Hashtable ();
boolean isValid = false;
try {
this.setEnvironmentProperties();
String domainName = AuthenticateResources.getString("mydomain.com");
//set the name of domain with the user name
String fullName = name + "@" + domainName;
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL,"ldap://mydomain:389");
env.put(Context.SECURITY_AUTHENTICATION,"simple");
//set user related information
env.put(Context.SECURITY_PRINCIPAL, fullName);
//set user password
env.put(Context.SECURITY_CREDENTIALS, password);
//validate user
ctx = new InitialDirContext(env);
isValid = true;
}catch (AuthenticationException ex){
isValid = false;
catch (NamingException ex) {
throw ex;
}finally{
this.freeContext();
return isValid;

This is usually a problem if Anonymous Binding is enabled. I have faced this in other Directory Servers, but I am not familiar with Active Directory.
I think by default Active Directory disables Anonymous Binding, but you may want to check.

Error while reading users in CMC BO 4.1 SP05

Hello All,
Does anybody knows the solution? We recently updated from BO 4.0 SP06 to BO 4.1 SP05, Windows Server
I get this error when i try to read users in CMC
[repo_proxy 13] SessionFacade :: open session logon with user info has failed (CSecSAPR3Binding :: :: XRFCCnxBroker BorrowConnection () failed. For more information, see the following log entries.
Error when logging on to the SAP system. The following RFC error was reported: [group key message]: [4, "RFC_COMMUNICATION_FAILURE", "
LOCATION CPIC (TCP / IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed April 22 2015 10:33:20
RELEASE 720
COMPONENT CPIC (TCP / IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 14419
COUNTER 1
. "] The entitlement system was disabled in memory Possible reasons:. The SAP system is not available or if the credentials are invalid The authorization system must be activated again, so that it is available again..
(hr = 0x80042909 #)
KR,
Manna

Hi Manna,
When trying to read users from CMC, there are several authentication type users which are displayed such as Enterprise, AD,LDAP, SAP.
From the error, I believe you have some SAP users which are not promoted properly in Business Objects.. May be some issues with the entitlement system configured for SAP Users.
Login into CMC >> Authentication >> SAP and verify if the entitlement systems are enabled and check if you are getting any error at the Role Import Tab
-Ambarish-

Server 2008R2 mapping to shared folders fails users of Windows 8.1 but seems OK on Windos 8.0 and no problems for Windows 7

Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justify

Hi，
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support

How to Sync User attributes between local forests?

Hi
We are currently migrating three AD domains to one.
We are migrating users and distrubution groups with ADMT to the new domain, and stating to move services to the new domain. starting with sharepoint.
But for some time, some services will remain in the three old domains. To avoid maintaining user attributes like phonenumber, address etc multiple places, I would like to schedule a sync of some user attributes from the old domains to the
new.
Just like DirSync between a local directory to office 365 - but how is it done with local domains and not with office365?
So if a helpdesk user is updating a users phonenumber i one of the three old AD, it should be synced to the new domain after. I would like to run this as a schedule task every 15 minute or so.
ADMT is like a one time migrating tool to create the users in the new domain, but I can't see that it will support user attribute
synchronisation.
Do you have any suggention on how I can solve this task?
Best Regards, Steffen.

ADMT is like a one time migrating tool to create the users in the new domain, but I can't see that it will support user attribute
synchronisation.
I am not sure about the schedule task and if it is available to use in this scenario or not. You have two different security boundaries, so it is not easy as setting up a scheduled task to sync data. Even if it is possible, it would be very hard to established.
For selected users you have to define what to sync and what not to sync and etc.
I believe on of the things you can do is to use FIM 2010 in order to have a synchronized directory. That is the best thing you can do AFAIK.
Sync Users between domains with Forefront 2010
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or
to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.

How to Back Up User Files (Windows 7 64-bit ) in HP laptop?

He everybody!
I have a HP laptop
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N
I have read 'How to Back Up User Files (Windows Vista or XP)'
Back up files with the HP Recovery Manager
The HP Recovery Manager is used to back up user files to an external USB storage device.
1-Boot to the recovery partition 1. by pressing F11 .
2. Click Advanced Options .
3. Click Backup computer files .
4-Select the type of files you need to back up from the list and then click Next . It will take several
minutes to locate all of the files, no matter where they are on the hard drive.
5. Select the destination device (external USB hard drive or a USB flash drive/Memory Stick).
6. Click Next to start the backup.
New files will be backed up. Depending on the number of files located, it could take an hour or more to backup
the file.
However, When I have done those steps I encountered these:
First: I didn't see any option to save the files in an external hard disk or even another partition other than Windows partition.
Second: I haven't find any option to back up my files in other partition other than Windows partition, I have let Recovery manager proceed to save at any place it prefers. After that, I found that Recovery Manager gave me an error during copying the files :
Recovery Manager failed in finishing backup files, error: FFFFFF14, although the percentage of progress was %67
Also, I have enough free space on Windows partition.

Would it be quite good if anyone could take some time out to reply me?

Can not change files from "Read Only" In Windows 8.1

I am the only Administrator on my computer, there are no other accounts. Some how all my files now have the read only attribute and I can not change it. It gives me the option to change it and I do and it looks like it got rid of it; but as soon as I close
out of the properties window and go back into the read only attribute is still there.
The read only attribute doesn't even act like itself because I can still edit the files that are in the selected read only folder. But it doesn't let me change the folder group options.
None but one of these folders are customized so it is not a problem that can be resolved by the other threads I have read.
Even new files I create have the read only attribute, please help, this is really annoying.

Hi,
For this problem, please refer to the KB below to repair the problem for test firstly, If no use, please feel free let us know.
You cannot view or change the Read-only or the System attributes of folders in Windows Server 2003, in Windows XP, in Windows Vista or in Windows 7:
http://support.microsoft.com/?kbid=326549
Note: This article also applys to Windows 8.
Roger Lu
TechNet Community Support

Read User Attributes Windows NT

Similar Messages

Maybe you are looking for