Reading an error messages in one order

HI All,
How can we read the ERRor Messages in the one order (i.e CRMD_ORder) transaction. Is there any function module which gives all the errors when we pass the Object Number/ Guid.
Thanks
Naresh

Hi Naresh,
Try the following function module passing parameters as indicated:
CRM_MESSAGES_SEARCH
IV_REF_OBJECT = GUID of the oneorder object
IV_REF_KIND = A (for header) or B (for item)
IV_ONLY_ERRORS_ON_OBJECT = abap_true
This will return the message log handle and message number in et_msg_info. Then, to get the message details, you can use the handle and message number and call the following FM:
CRM_MESSAGES_GET_LONGTEXT
IS_MSGH = (fill this structure with handle and number found above)
The message details will be fetched in the exporting parameters.
Regards,
Shiromani

Similar Messages

Reading error message of an order

hi ,
i want to read the error messages of a order .
one probable solution is reading application log but i don't know how to read the application log of a order.

Hi,
Please read the following link for your information:
http://help.sap.com/saphelp_crm50/helpdata/en/85/44e03b861eeb66e10000000a11402f/content.htm
Best Regards,
Johnny.
Reward if it helps.

Error Message while doing Order CLSD

Hi,
I am getting error message while doing Order CLSD...
Error Msg: Invalid cost element(XXXX) for reservation item 010.
please suggest me...how to solve this issue.
regards,
Venkatesan Anandan

Hi Venkatesan,
I had replied and asked for one clarrification and to check same at your end.
Is your Cost Element mapping done with cost cost center used in order settlement rule.
Also check for Material Master Change document for Valuation Class change and revert back in this thread.

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

Customer error message in sales order on save

Hi Friends,
as per requirement i have to raise the error message and system should enable the field to change values. This should happen when condition is not met on Saving of Sales order.
For this, i have used the user exit USEREXIT_SAVE_DOCUMENT_PREPARE. But the problem is system throwing error message and all r in display mode only. as per my requirement system should allow to change the error value field.
i have verified many posting in this SDN, but nothing is working out.
Please guide me, how to raise the error message and system should enable that filed.
My doubt is where should i raise the error message in sales order (MV45AFZZ)??? if any badi to raise the error message also fine for me. I tried many ways like... message with display like..... and set / get parameters and badis.... but not able to find the correct solution.
Thanks in Advance.
Bala

Hi
You need to use check for enahcement spot, which will be help to you.
Bcz you are throwing custom error message in the standard transaction, once the error is display, you could not able to change the values. your prob can be solved by using the enhancement sport.
This is include name (Include:MV45AF0B_BELEG_SICHERN).
In the above include, you need to create a enhancement spot after this spot (ENHANCEMENT 16 OI0_COMMON_SAPMV45A.)
write your custom code and while displaying an error message. set flag = 'x', then use below code. It will display error message once you press ENTER, you will get the sale order in change mode, you change the values.
IF flag = 'X'.
          fcode = fcode_gleiche_seite.
          perform fcode_bearbeiten.
          ch_subrc = 4.
          exit.
        ENDIF.

Acrobat read-only error message

http://forums.adobe.com/message/4117896
Hello I am following on from a previously reported issue.
We have a client who are using Adobe Acrobat 9 and have .PDF's saved in a Share Folder. Is the creator of the document but is still faced with the read only prompt when trying to save the document after making an edit (e.g rotating). Upgrading to Adobe Acrobat 9 isn't an option.
Folder permissions in both Share and NTFS is okay.
User's profile has full control of the folder it is being saved in. I've also ensured the reading pane is Windows Explorer is off when they're opening it.
Have run a repair on Adobe Acrobat 9 and tried with other documents with the same result.
Saving locally does not have the same issue.
Please advise a solution for using .PDF for Adobe Acrobat 9 in a Share Folder environment.
Server is SBS2008 and user's PC is Windows 7 Professional.
Eagerly await a fix.

I am having the same issue. Acrobat X was working fine for me for months, then out of the blue, it starts having this problem TODAY! (There must be something about the month of November when people have this problem with Acrobat! )
Each time I open a PDF file in Acrobat and make an edit, (such as highlighting text or adding a link to a web page), I cannot save the file by the same name. I get the "read only" error message:
"The document could not be saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
I installed the latest updates for Acrobat after this problem occurred, but the "read only" error message persists. In a previous thread, one person suggested turning off Acrobat's Protected Mode by going to Edit/Preferences/General and unchecking the Enable Protected Mode At Startup. I do not see this option in Acrobat X.
The only work-around I've found is to save the PDF file with a temporary name, then after making the edits in Acrobat, save the file as the original name that you wanted the file to be in the first place.
I'd rather not have to mess with work-arounds. I just want to make this problem go away. Any help or suggestions would be appreciated!
regards,
ChristyGTWE

I have been trying to reinstall iTunes but have been getting error messages. One says I need file MSVCR80, one says I have error 7 and the last one says I have windows error 126.

I have been trying to reinstall iTunes but I have been getting error messages. One says I need a fileMSVCR80.dll, one says error 7 and the last one says windows error126.
This problem started yesterday when I tried to download the newest iTune update.
The error message suggested trying the download again and i have tried over ten times and i get the same messages and error numbers.

iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Change username to "last name" in error message for blocked order

Hi,
is there a way to change the user name to the "last name & first name" for error messages about blocked orders, so that the you can know the real name of the person who is blocking the order.
Thanks & kind regrads,
Oliver
Edited by: Oliver Pregler on Nov 22, 2010 11:59 AM

Hi,
I hope the error message that you are talking of is in the bdoc and not a SAP GUI one. There are two ways to handle this,
one is crude way and other a bit long way:
1. change the Message in message class itself....but this will wipe out after upgradation and all...
2. code this change in the Dataexchange badi and manipulate the text as you want......
Hope it helps.
Regards
Sidd

Read only error message when trying to save updates in Acrobat 10.6.3

Hello
Hopefully I'm missing something obvious here but when I try to edit a PDF in Acrobat 10.6.3 I receive a read only error message, I have been using 'Save As' and tweaking the name each time but this seems to be a clumsy way to go about a simple save.
I am on a network and have read a previous thread that explained Adobe can sometimes be flakey on networks for saving PDFs.
Any suggestion gratefully received.

You may be stuck with copying the files locally and editing and then copying back to the network drive. I am not good with networks, but have noticed posts about network problems over the years -- often focused on specific networks. The solution is typically to deal with the PDFs locally and then copy to the network. In creating PDFs, it seems that some of the results had to do with the TMP folder usage, but I have no clue why.
As far as AA 10.6.3, you must have a cloud version or something. The latest AA is 10.1.7.

When I send an e-mail to a group address, from my address book, I get an error messageI get an error message that one of them is not a valid e-mail address, although I have used it alone without any problem.

When I send an e-mail to a group address, from my address book, I get an error messageI get an error message that one of them is not a valid e-mail address, although I have used it alone without any problem.

See https://support.mozilla.org/en-US/questions/1018363

BP 613 error message in internal order budget availibility control

I Define Tolerance Limits for Availability Control 50% has a react "2 Warning with MAIL to person responsible"
but it get a error message
Item 001 Order 20000001 budget almost exhausted .It should be a warning but get error.
Would someone help me?

Hi
Note down the message number.
Go to T.code OBA5 input the Application Area first two letters of the message number and look for the message number (the other digits in the message number).Change it from E to W under online and Batch.
Hope your issue should be resolved
Good Luck
Hari

Illustrator CC PDF opens in Reader with error message

When I save an Illustrator file as a PDF, Adobe Reader users get an error message when opening the file – "An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." Why is this happening?

My apologies. We should have been more specific with our question.
We should have asked this:
Has anyone else seen this message in Acrobat Reader when opening PDFs
created in Illustrator CC since the most current update (v.17.1.0)? If so,
would you be so kind as to reply with any general or specific information,
or even thoughts, as to what might be causing it in this newest version of
Illustrator?
The error message reads:
"An error exists on this page. Acrobat may not display the page correctly.
Please contact the person who created the PDF document to correct the
problem." (Oddly, the message says "Acrobat," even though the application
it appears in is Reader.)
The message appears to Adobe Reader users (current version v.11.0.06,
running in Mavericks); and started appearing after we updated Illustrator.
The file content (except for one minor type revision), the PDF settings, the
Adobe Reader users (clients), etc., haven't changed since before then. There
were no issues with PDFs created in the past from the same file, but when we
created new PDFs, our clients received the error message upon opening them.
The files do open, and seem to be fine otherwise; but the recurring message
does annoy our clients, and erodes our credibility as digital designers.
We have tried several strategies to resolve this problem saving the PDFs
with different settings; altering the file format of the linked image files;
embedding the images files; outlining the type; using alternative typefaces;
expanding appearances of objects; etc. anything we could think of to
simplify the file or remove an offending file component all to no avail.
We even opened the PDFs in Acrobat XI Pro CC (v. 11.0.06) and resaved with
new file names, and were still met with the same difficulty.
Other details: sRGB color profile in AI file and images; 3 - 11 x 8.5" art
boards; PNG-24 images; PDF settings used: Illustrator Default, PDF/X-4:2008,
Smallest File Size, High-Quality Print, plus a few custom settings from
printers and developers
So . . . We were hoping that if anyone had encountered this same message,
they might have a clue as to what it relates. Any insight would allow us to
troubleshoot further with that information in mind.
Many thanks in advance.

Clearing error messages in Purchase Order

Hi All,
Can anybody tell me how to clear error messages in user exits when changing the error message?
My problem is like this and using the exit 016.
I want to make sure Plant in all line items are same. If the user changes one Plant, then I am comparing that with other line item plants and giving error message if they are wrong.
Then, instead of changing the line item 10, if user changes Plant for 20, in this situation both plants are same. Hence, should able to save the purchase order.
But it is not able to save the PO because, it is not able to clear the error message on line item 10.
Can somebody suggest, how to clear the error message?
Hope, I made the question clear.
Shylesh

Hi Friend,
Fire an information message instead of error message.
Because you can not handle error message in user exit / BADi.
Standard way of handling error message in screen by CHAIN ENDCHAIN.
But you do not have control on the table control of PO.
So it is better to fire an information message.
Regards
Krishnendu

Reg. Error message during Purchase order more than PR.

Dear Sir
After putting Purchase order for a Purchase requisition we can able to rise Purchase order for a PR. We a error message. Kindly give the solution this problem.
How to set error message in this case.
Thanks
Rajj.

Hi
If u want to restrict PO creation with more than PR Qty u can set error message in OME0 or path as follows
SPRO>Materials Management>Purchasing>Environment Data>Define Attributes of System Messages-->system message
06 076
Set the message no : 06 076 as error messages.
Then when All The PR qty already convert to PO,then system will not allow another PO to created for this PR.
Vishal...

Reading an error messages in one order

Similar Messages

Maybe you are looking for