Reading files from the parent directory
Hi all, I'm just wondering if files can be read from the parent directory.
I've created a package and realise that for one function it needs to read from a file which was created in the parent directory. I've tried:
BufferedReader inPut =
new BufferedReader(new FileReader("../file.txt"))
but it's still saying that it can't find the file.
Any ideas if I can read that file?
Thanks
How about using the getParent() or getParentFile from the File class?
Similar Messages
-
I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????
Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene -
the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?Check out pogo plug device, it allows you to upload camera roll via wifi.
-
I want to Pick the Single file from The source Directory
Hi,
My Scenario is File to RFC .. I'm getting the files in the source Directory.. File names are SENDER_(TIMESTAP).XML .. but the problem is... When ever Files are available in the Source Directory Immediately XI was picking all the files at a time.. But I want to to Pick a single file at a time..
for Making this what we have to do.. After Processing the first file then only my Sender adapter should pick the next file... (even though Multiple files are available in my Source Directory)
Regards
JainHi,
the other option was use Adapter specific attributes in the Sender Communication channel..
or
while droping the files ask them to drop using time stamp in another directory and an external validation is required .. and after validation push single file to Source directory using batch file..
i.e use a batch file using run time operating system or make that batch file to run at OS level ..
where the batch files needs to validate the time interval of the file and needs to push a single file to the source directory.. where from there we can directly pick a single file and process..
regards,
Kishore -
Reading file from the presentation server in the background
Hi,
I am trying to read a .csv file from the presentation server into an internal table in the background. what should I do for it? In the foreground it works fine.
I have declared a selection parameter 'p_file' that has the path of the file. It wokrs fine in the foreground and how to set it up in the background?
Any thoughts would be helpful. Thanks in advance,
VGhii
did you achieved the required functionality , i,e, accessing presentation server file i nbackground .
I too got the same requirement, can you explain the process.
There is no way you can do it... The best method is to put the file on Appln server and then call it in the background mode.
Regards,
Vishwa. -
Include using jsp:include for a file from the docroot directory.
Hello,
I try to include one file from the doocroot but only can import files from the context (War deployed).
when I put
<jsp:include page="/foo.htm">
to include this file: http://www.mydomain.com/foo.html
it try to show this file: http://www.mydomain.com/mycontext/foo.html
it puts ever the context before the name of my file.
How can I include this file.
Thanks
PD: obviously 'foo.html' is in the doocroot.From within a JSP you have a reference to a PageContext called pageContext. This has a method getServletContext(). From the ServletContext you can find the real path the servlet lives in. So...
File basePath = new File(pageContext.getServletContext().getRealPath("/"));Now basePath contains your path $Catalina/webapps/webservices. Then it's just a matter of working relative to that, e.g.:
File usersFile = new File(basePath, "users.txt"); -
Want To Pick a single file from the Source Directory
Hi,
My Scenario is File to Proxy. Legacy team is generating Bunch of files in a same directory.But i want to pick single file for each poll interval. after process teh firts file only Sender Adapter should pick and process the next file .
At prsent , My scenario is picking all the files in a single shot and all the files are processing parellelly. . But all the files are related to one Process Order So, out of bunch of files some few of files are processing successfullu. remaining all teh files are getting " Proces Order is locked by another User" Error message . This was happeing only for the parellel processing. And from technical point of view , In sender Communication Channel i have used Quality of Service is Exactly Once in Order and i have mentioned the Queue name also. .
Evel legacy team is generating Bulk of files i want to pick a single file only, suppose if theer is no chnace then at least i want to process single file at a time after finishing the one file processing , then only i want to go for the next file
For this, is teher any paremeters need to be set , please suggest me,.
Regards
JainAt prsent , My scenario is picking all the files in a single shot and all the files are processing parellelly.
Are you using the Additional Source Files options?
What you can do :
1) Select Processing Tab > Processing Sequence> By Date
2) You can introduce a delay between two processing by using a Thread.sleep(msec) statement in some UDF in your mapping...this will ensure some delay between two processing: Re: Delay in MM possible ?
3) You can select the Connect Mode option as Per File Transfer.....keep it as the last option....
Regards,
Abhishek. -
Does anyone know how to load a file from the source directory?
I have a Photoshop panel that uses the Texturizer function. I would like to use the images in the src images directory of the project. I need to reference the /src/images directory of the panel when the project is running.
Does anyone know how to access the source directory using action script?
I have tried a number of options but only seems to work if I hard code a location
public static function Mat02(): void
// Works
var myTexture:File = new File("C:\\Users\\Ed\\Adobe Flash Builder 4.6\\LayoutBuilderSuite\\src\\images\\mat 02.psd");
// Tried - no luck
// var file = File.applicationStorageDirectory.resolvePath("mat 02.psd");
// var file:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var file:File = File.applicationStorageDirectory;
//file = file.resolvePath("mat 02.psd");
//var myTexture:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var myTexture:File = File.documentsDirectory.resolvePath("mat 02.psd");
var desc5:ActionDescriptor = new ActionDescriptor();
desc5.putEnumerated( app.charIDToTypeID( "GEfk" ), app.charIDToTypeID( "GEft" ), app.charIDToTypeID( "Txtz" ) );
desc5.putPath( app.charIDToTypeID( "TxtT" ), myTexture );
desc5.putInteger( app.charIDToTypeID( "Scln" ), 150 );
desc5.putInteger( app.charIDToTypeID( "Rlf " ), 4 );
desc5.putEnumerated( app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LDBR" ) );
desc5.putBoolean( app.charIDToTypeID( "InvT" ), false );
app.executeAction( app.charIDToTypeID( "GEfc" ), desc5, DialogModes.NO );
ThanksI haven't seen too many questions like this on this forum. Did you also try the photoshop forums?
-
How to read files from the menu prompt
Hi all the experts here, help me plz
this is the menu
R - Read a batch of student marks from a file
D - Display a table of student results
Q - Quit from the program
when user press R the program has to read a file. The default file name is results1.txt
but my teacher is gonna change the file name when she tests it.
so i can't put the fixed file name. i have to read the file name from the command
prompt
The user will type the file name and i just have to read that file..but..its hard for the
biginner...THX guyshelp me guys plz im really stuck man
public char promptMenu()
System.out.println ("R - Read a batch of student marks from a file");
System.out.println ("D - Display a table of student results");
System.out.println ("Q - Quit from the program");
char answer = Keyboard.readChar();
return answer;
after user press 'R'
then i have to read a file whatever the user enters.. -
How do I delete a Pages file from the Users directory?
Browsing my new MacBook I've spotted that a version of one of my earliest Pages docs is stored directly in the Users directory. There is no option in Finder to delete it. I can drag a copy elsewhere, but I want to get rid of it completely. How do I achieve this?
Thanks.Hi Andrew,
You need to go to your Users Library...
users/yourname/library/application support/iwork/pages/templates/my templates
If using Lion... in Finder, hold down the Option key while clicking on the Go menu and your users Library will appear... -
File Adapter polls all the files from the directory when deployed again
Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving. -
PI is not able to pick the file from the FTP folder
This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestionHi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path. -
CL_GUI_PDFVIEWER and files from the App server
Hi,
I would liek to use the class CL_GUI_PDFVIEWER to read files from the app server (transaction AL11) and then to present them.
it is easy to use the local machine files.
how can I use the method open_document with a file from there?
Thanks,
ItayThanks for the help.
I tried what you suggested but I get a dump for some reason.
Can you help?
This is the dump:
Exception condition "SYSTEM_FAILURE" raised.
Program SAPLOLEA
Include LOLEAU10
Row 358
Module type (FUNCTION)
Module Name AC_FLUSH_CALL_INTERNAL
This is the program:
REPORT zpdftest .
DATA: g_html_viewer TYPE REF TO cl_gui_html_viewer,
my_main_container TYPE REF TO cl_gui_custom_container,
entry1(100) TYPE c,
entry2(100) TYPE c.
DATA: okcode TYPE sy-ucomm,
gt_pdf TYPE STANDARD TABLE OF string,
wa_pdf TYPE string,
g_url(2048) TYPE c
START-OF-SELECTION.
SET SCREEN 100.
*& Module pbo_0100 OUTPUT
MODULE pbo_0100 OUTPUT.
SET PF-STATUS 'STATUS100'.
SET TITLEBAR 'TITLE100'.
IF my_main_container IS INITIAL.
CREATE OBJECT my_main_container
EXPORTING
container_name = 'CUSTOM_CNTL'
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
CHECK sy-subrc IS INITIAL.
CREATE OBJECT g_html_viewer
EXPORTING
parent = my_main_container
EXCEPTIONS
cntl_error = 1
cntl_install_error = 2
dp_install_error = 3
dp_error = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: lv_filename TYPE rlgrap-filename.
lv_filename = '/PBMGUS/UXA/ABAP/TEST.PDF'.
OPEN DATASET lv_filename FOR INPUT
IN BINARY MODE
WHILE sy-subrc IS INITIAL.
READ DATASET lv_filename INTO wa_pdf.
IF NOT sy-subrc IS INITIAL.
EXIT.
ENDIF.
APPEND wa_pdf TO gt_pdf.
ENDWHILE.
CLOSE DATASET lv_filename.
CALL METHOD g_html_viewer->load_data
EXPORTING
type = 'application'
subtype = 'pdf'
IMPORTING
assigned_url = g_url
CHANGING
data_table = gt_pdf
EXCEPTIONS
dp_invalid_parameter = 1
dp_error_general = 2
cntl_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD g_html_viewer->show_url
EXPORTING
url = g_url
EXCEPTIONS
cntl_error = 1
cnht_error_not_allowed = 2
cnht_error_parameter = 3
dp_error_general = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDMODULE. " pbo_0100 OUTPUT
*& Module pai_0100 INPUT
MODULE pai_0100 INPUT.
CASE okcode.
WHEN 'BACK'.
LEAVE to screen 0.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CLEAR okcode.
ENDMODULE. " pai_0100 INPUT -
When Access Protection is enabled under the category "Common Standard Protection", Rule: Prevent common programs from running files from the Temp Directory is enabled. the updates fail.
This rule provides some protection against possible malware execution. However when this rule is enabled FireFox updates fail. We have set exclusions for "updater.exe" but the problem seems to be when FF restarts and the update fails. Is there anyway of finding out what is happening at that point?? as in what FF is doing? The old FF closes and it seems to spawn a fresh "firefox.exe". But the OLD version is still current.
I would like to know if this update process can be identified and with the possibility of excluding what is being blocked so keep the extra security that this rule gives.
When the rule is disabled, FF updates without issue.That's a comment in the file. It has no effect at all.
-
Dynamically Reading Files From Application Server
Hi Experts,
Presently I have to write a program which reads files from the application server dynamically. This program will be scheduled in the background with the frequency of half an hour.
I am Using the function module
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
DIRNAME = '/usr/sap/xxx/xxx/'
FILENM = 'DATASET'
PATTERN = '.txt'
TABLES
FILE_LIST = IT_FILELIST
I am facing problem in specifying the parameter FILENM in the function module,
As I have to read many files from the apps server. How to assign the parameter of function module so it can take the many files generated in the apps server.
Thanks in Advance,
Regards,
Irfan HussainHi,
Instead of the above FM, you can use the following code :
AT SELECTION-SCREEN ON VALUE-REQUEST FOR po_ifile.
PERFORM get_current_directory USING 'PO_IFILE' po_ifile
rov-home_dir rov-curr_dir.
PERFORM get_filename-of-server TABLES itab_filename
USING rov-curr_dir rov-gen_name.
PERFORM help_values_get_with_table_ext TABLES itab_filename
USING rov-curr_dir
po_ifile.
*& Form get_current_directory
text
-->P_0023 text
-->P_PO_IFILE text
-->P_ROV_HOME_DIR text
-->P_ROV_CURR_DI text
-->P_CALL text
-->P_FUNCTION text
-->P_0029 text
-->P_IMPORTING text
-->P_FILE_NAME text
-->P_= text
-->P_PO_IFILE text
FORM get_current_directory USING _fieldname
_filename
homedir
currdir.
IF _fieldname <> space.
PERFORM dunp_value_read USING _fieldname _filename.
ENDIF.
IF _filename = space.
currdir = homedir.
ELSE.
rov-work_dir = _filename.
rov-fdpos = STRLEN( rov-work_dir ).
DO.
IF rov-fdpos = 0.
EXIT.
ENDIF.
rov-fdpos = rov-fdpos - 1.
ASSIGN rov-work_dir+rov-fdpos(1) TO <rov_p>.
IF <rov_p> = rov-delchar.
<rov_p> = space.
EXIT.
ELSE.
<rov_p> = space.
ENDIF.
ENDDO.
currdir = rov-work_dir.
ENDIF.
ENDFORM. " get_current_directory
*& Form get_filename-of-server
text
-->P_ITAB_FILENAME text
-->P_ROV_CURR_DIR text
-->P_ROV_GEN_NAME text
FORM get_filename-of-server TABLES nametab STRUCTURE itabfilename
USING _dirname _genname.
CALL 'C_DIR_READ_FINISH' " just to be sure
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
CALL 'C_DIR_READ_START' ID 'DIR' FIELD _dirname
ID 'FILE' FIELD _genname
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
IF sy-subrc <> 0.
EXIT.
ENDIF.
REFRESH _nametab.
DO.
CLEAR _nametab.
CALL 'C_DIR_READ_NEXT' ID 'TYPE' FIELD _nametab-type
ID 'NAME' FIELD _nametab-name
ID 'LEN' FIELD _nametab-len
ID 'OWNER' FIELD _nametab-owner
ID 'MTIME' FIELD _nametab-mtime
ID 'MODE' FIELD _nametab-mode
ID 'ERRNO' FIELD _nametab-errno
ID 'ERRMSG' FIELD _nametab-errmsg.
_nametab-dirname = _dirname.
MOVE sy-subrc TO _nametab-subrc.
CASE sy-subrc.
WHEN 0.
IF _nametab-name+0(1) = '.'.
ELSE.
APPEND _nametab.
ENDIF.
WHEN 1.
EXIT.
WHEN OTHERS. " SY-SUBRC >= 2
EXIT.
ENDCASE.
ENDDO.
CALL 'C_DIR_READ_FINISH' " just to be sure
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
ENDFORM. " get_filename-of-server
*& Form help_values_get_with_table_ext
text
-->P_ITAB_FILENAME text
-->P_ROV_CURR_DIR text
-->P_PO_IFILE text
FORM help_values_get_with_table_ext TABLES _filename
STRUCTURE itab_filename
USING _currdir
_selfile.
TYPES: BEGIN OF f4typ_head_struc,
tabname LIKE help_info-tabname,
fieldname LIKE help_info-fieldname,
head_text LIKE shstruc-keyword,
END OF f4typ_head_struc.
DATA itab_fields LIKE TABLE OF help_value WITH HEADER LINE.
DATA itab_selvals LIKE TABLE OF help_vtab WITH HEADER LINE.
DATA itab_values LIKE TABLE OF rlgrap-filename WITH HEADER LINE.
DATA itab_header TYPE TABLE OF f4typ_head_struc WITH HEADER LINE.
REFRESH itab_fields.
REFRESH itab_selvals.
REFRESH itab_values.
REFRESH itab_header.
itab_fields-tabname = 'PS0192'.
itab_fields-fieldname = 'BAA01'.
itab_fields-selectflag = ' '.
APPEND itab_fields.
itab_fields-tabname = 'RLGRAP'.
itab_fields-fieldname = 'FILENAME'.
itab_fields-selectflag = 'X'.
APPEND itab_fields.
LOOP AT _filename.
itab_values = itab_filename-type.
APPEND itab_values.
itab_values = itab_filename-name.
APPEND itab_values.
ENDLOOP.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
FIELDNAME = ' '
TABNAME = ' '
TITLE_IN_VALUES_LIST = ' '
SHOW_ALL_VALUES_AT_FIRST_TIME = ' '
USE_USER_SHRINKING = ' '
titel = _currdir
NO_SCROLL = ' '
NO_CONVERSION = ' '
NO_MARKING_OF_CHECKVALUE = ' '
IMPORTING
index = rov-index
select_value = rov-selvalue
TABLES
fields = itab_fields
select_values = itab_selvals
valuetab = itab_values
HEADING_TABLE =
EXCEPTIONS
field_not_in_ddic = 1
more_then_one_selectfield = 2
no_selectfield = 3
OTHERS = 4.
IF sy-subrc = 0.
CLEAR itab_filename.
READ TABLE itab_filename INDEX rov-index.
IF itab_filename-type+0(3) = 'dir'.
CONCATENATE _currdir rov-delchar rov-selvalue rov-delchar
INTO _selfile.
ELSE.
CONCATENATE _currdir rov-delchar rov-selvalue INTO _selfile.
ENDIF.
ENDIF.
ENDFORM. " help_values_get_with_table_ext
Best regards,
Prashant
Maybe you are looking for
-
Error in Transaction code PRCCE
Hi, I am facing a problem in ruuning the transaction code PRCCE.In that transaction code in the Field "Card Compamy" I put MC which is defined in the system and exected it and Click on new entries to add missing transactions into the table. This wil
-
Problema Photoshop CC 2014 CameraRaw Nikon D4S
Buongiorno, mi sono registrato ad Adobe, ed ho scaricato Photoshop CC 2014 in versione di prova, provo ad aprire i file fatti con la mia macchina fotografica ma esce un errore. Computer: Sistema operativo Windows 8.1Antivirus: Kaspersky Internet Secu
-
Need help with Buttons/Events
HI Here is what I am doing. I am creating an "operations" calendar for my workplace. So far I have been successful with creating the page, inserting links, tags, images etc..... But now I want to add an Event button - where once the button is clicked
-
Structure maintenance not provided for Extraction structure MC02M_SCN
Hi BW Experts, I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you pl
-
Failing to import .NEF files into iphoto
i photo will not import .NEF files. Every time I try to import a file an error message comes up saying... The following file could not be imported. (import failed). The .JPEG file imports straight from the camera, however the .NEF file will not impor