Reading MAX Configuration using a VI

I would like to read the MAX Configuration for Remote Systems from a VI. Can anybody tell me how can I do that?......................

Hi There,
Where will you vi be running - on a Windows computer Or a NI Real Time controller? Could you also describe your application further. Have a great day!
Regards,
Prashanth

Similar Messages

Is there any way to read to dynamic configuration using abap mappings?

Hi,
Is there any way to read dynamic configuration suppouse filename using abap mappings, I mean using abap code?
Appreciate for your response.
Regards,
Daniel.LA

Daniel,
Yes it's possible. Please refer Henrique Pinto's reply in this thread -Re: Abap mapping and variable substitution in File adapter
raj.

How do MAX configurations get saved on cFP?

I need to find out how the MAX configuration gets saved on a cFP-2200 module so I can read from it dynamically. I need to do this in order to make installations of my software more generic, allowing dynamic reading of input channels without having to know things like the DNS name ahead of time. I already understand how to create dynamic paths with LabVIEW but it seems that changing the DNS name to something other than what the original install was under makes any paths using the new name useless. I am using RT "Get target info" to dynamically see the target's name. Working this name into the path for looking up input on the cFP-AI-102 channels only seems to work if the name stays the same as it was originally.

I am connected to the cFP-2200 over a LAN. I can have several of these at a given site which is why the name needs to be flexible. I also use the name in some VIs for various purposes, such as configuring dynamic TCP listeners on a server application.
When I say "DNS name," I'm referring to the "RT Get Target Information.VI" under the RT toolkit's output cluster and specifically, the element "IP Settings.DNS Name." This is also the name I would set for the target in max and when I do this, the output of "IP Settings.DNS Name" changes with it. Also, when I click "find devices" on the cFP in max, the default comm resource name for the device in the iak file is whatever I had set for the "name" at the time.
The "FP Create Tag.VI" which I am using to create paths to the inputs of the target has an input called "comm resource name." Since this was set to the same thing as the "name" in max, my expectation was that changing the name for a device in max would also change its comm resource name. However, my example above shows my expectation does not match what is actually happening. While the DNS Name is tied to the name set in max, the "comm resource name" is not even though during the initial creation of the iak file in MAX, they are the same.
To make a long story short, I am able to get my software to work by making sure that the comm_resource_name is hard coded to the value originally set in the project which created the build. This solution is adaquate but not optimal because I would rather be looking this up dynamically for the sake of maintainability. If the comm_resource name and DNS Name are separate entities, that is fine. There just needs to be a way to look both up dynamically if they are separate.
I guess this has become more of a suggestion than a problem I'm reporting... unless of course the behavior I'm describing is not what NI intended, in which case it's a bug.

Pppd disregards 'noipv6' and 'ipv6cp-max-configure' options

[Note - this post is a duplicate of http://discussions.apple.com/thread.jspa?threadID=2376412&tstart=0 - which seems to be in the wrong category]
Hi,
I am attempting to use a Sony Ericsson phone to connect my Macbook to the internet using bluetooth.
I have configured the phone, but it fails to connect. Accordingly, I have enabled verbose logging so that I can see what's going wrong with the connection.
I watch the PPP negotiation, and my end successfully completes the LCP phase including PAP.
However, my end then sends an IPV6CP request, which confuses my provider's PPP implementation - it sends back an LCP reject message, and the whole thing just dies.
I have created the file /etc/ppp/options and placed in it "noipv6" and "ipv6cp-max-configure 0" directives. I can see that the /etc/ppp/options file is being read, but pppd nonetheless sends an IPV6CP message.
Is there a known issue with pppd (Apple version 412) not accepting options listed in /etc/ppp/options? Is there some other location that (as a user) I can place options to pppd (other than the configuration tabs in Networking)?
Thanks in advance!

I disabled ipv6 and am checking my (verbose) ppp logs and its gone, but still I have the 30 second delay... QUITE frustrating.. I detailed my whole problem in another thread... Not sure what is causing it.
But I have to say Mavericks and Yosemite have opened up a huge can of enterprise IT worms. Finder can barely parse directory listings using SMB, had to switch entire office over to AFP, 30 second delay with obtaining IP when connecting to Sonicwall using L2TP, Folders have different names depending upon how I connect to server (AFP vs. SMB). Total hassle.

Airport Utility 5.2 and 5.2.1 cannot read /edit configuration of AEBS 7.2.1

*THE PROBLEM ON my Mac:*
I am using an ethernet connection directly to a brand new AEBS from:
iMac Intel Core 2 Duo, 2BG RAM
X 10.4.10
airport turned off
Airport Utility detects the base station but cannot read the configuration to edit and setup. And displays the following error:
"An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-5)"
The AEBS does assign any machine connected via ethernet an IP address to allow internet access.
*THE PROBLEM ON WINDOWS:*
I have the nearly the same problem when using my Windows XP pro laptop connected via ethernet using Airport Utility for Windows ver 5.2 and 5.2.1
Airport Utility detects the base station, but when attempting to access the configuration, the Error message is practically the same with a different error code:
"An error occurred while trying to access the base station. Make sure your network connection is valid and try again. Error -6742
*STEPS ATTEMPTED TO REMEDY THE PROBLEM (w/out success):*
I have read the posts that say to turn off IPv6 on Mac, did that but with no success.
Others did a simple hard reset on the AEBS, I tried that too.
I've tried connecting to the AEBS directly with all other network devices (modem, other routers, etc) disconnected and turned off just incase there was some compatibly issue... no work. I even tried all the different ports.
Any other suggestions would be appreciated. Can I walk into a Apple retail store and ask them to check the the AEBS to see if they can access the configuration?
Just to be fair...
(For people who have only read this post, turning off the IPv6 worked for some people, and just doing a hard reset for others).

I finally figured it out. I had exactly the same problem when Airport Utility detected the base station but could not read the configuration to edit and setup, displaying the following error:
"An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-5)"
I tried everything (Unfortuantely it is impossible to consult to an Apple genius around here). Even the hard reset didn't work. That is what I did: I pulled off the power cord, and put it back again WHILE HOLDING DOWN THE RESET BUTTON with a pin. Only after that the amber light went on twinkling, and I could access it via the Airport utility. All the settings were reset so I just had to reconfigure it. Hope it works for you too.

"An error occurred while reading the configuration"

I updated my Time Capsule (1tb, old) with the new software last night (to 7.4.1 from 7.3.2). The upgrade process seemed to work fine. I then tried to go into the TC with Airport Utility 5.4.1 and when I click on the TC, I get a message that says, 'An error occurred while reading the configuration. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-5). I've rebooted the TC. I have plugged into it directly.
It now asks me for my password. I type it in and then I get the message. Any suggestions? Downgrade? Re-run the upgrade? Reset the TC?

foohan,
I had this same error, and I did have to reset (hold down the reset button for 5 seconds) my AirPort Extreme and Time Capsule to get past it. I noticed two things, though.
1. If I tried to connect to my Time Capsule from Finder, I got an error. But if I clicked the "Connect As" button, it asked for my password again, and I could get to all of my files to back them up.
2. All of my files were still on my Time Capsule after I reset it. I use it for remote file storage, not Time Machine, so I can't tell you if Time Machine backups will pick up where they left off.
Hope this helps.

Can't read AExp Configuration- is it dead?

Hi- had a network with an AEBS connected to the internet and an AExp as a client connected to my stereo for streaming music. All was working perfectly. I moved apartment- renamed network. At the same time I got a new Powerbook so moved from Panther to Tiger.
The network is fine for internet access, but I the AExp has stopped working. I can see it in AAU, and in iTunes it is an option to select. However:
1. In iTunes if you select it you get a box trying to connect which gives up after about a minute or two
2. In AAU it sees it but when you hit configure it waits for a while before coming back and saying it can't read the configuration
I've tried a factory reset. Was able to rename it, but back to the old problem.
I've tried to install new firmware- again, same problem- it sees it but can't update the firmware. Have also tried to connect via an ethernet cable to update and configure- but no joy.
Is it dead? I think I'm within warranty by about two weeks

This all suggests the problems are being caused by an incorrect network setup - not a defective Airport Express.
Make sure your cable/DSL modem is cabled to the AEBS ethernet WAN port (the one labelled with the "circle of dots" icon). Some people make the error of connecting the modem to the AEBS LAN port - which won't work properly.
Also, check the configuration of the AEBS with the Airport Admin Utility - make sure that (under the Network tab) you have checked the boxes to "Distribute IP addresses" and "Share a single IP address using DHCP and NAT".
When setting up the Airport Express with the Airport Admin Utility, select to set up the Airport Express to "join" an existing wireless network. Do NOT select the option to have the Airport Express "extend" an existing wireless network - unless the intent is to use the Airport Express to increase the wireless range of the AEBS.

Can't read airport configuration

I have an Airport Extreme base station (802.11g), which I use with Airport Utility 5.3.1 on my MacBook Pro (OS X 10.4.11). My internet connection is actually working fine, but when I tried to access the Airport settings because houseguests were having trouble using our wireless network, Airport Utility found the base station but could not read the configuration (error message -6753). I reset Airport, with the same result (except that now I can't rename the network or reset the password, because I cannot access the settings). I have also been unable to download the latest firmware for the same reason. So -- I can use Airport for internet access, but should I ever need to change the settings (as I was trying to do this evening), I'd be out of luck. Any thoughts?

Try connecting your laptop directly to the AEBS with an ethernet cord (you might have to reset the base station again).

Can I make a Data Guard configuration using EM console without Grid Control

Can I make a Data Guard configuration using EM console without Grid Console?
Can I download Grid Console software from Oracle website without cost?

Assuming this is for 10g,
You could use Oracle® Data Guard Broker
Even you can download Grid Control software for free from Oracle site, you can't legally use it without license.

Oblix_OBWebGate_AuthnAndAuthz: ..- Unable to read log configuration file.

Hi All,
I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.oracle.com/thread/2549716).
Now I have apply patch BP9 (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate) for Webgate, Now I have a new issue, I am unable to get the logon page of OAM when I try to access my Apache resource.
The Error Message in the browser is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
In the error log file of Apache I have found
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
Can Anyone help me regarding this issue...
Thanks
Tamim Khan

Hi Colin,
Thanks for your help, You are right I have change the permission of /opt/netpoint/webgate/access/oblix/lib/libxmlengine.so.
Now I am able to access the logon page of the access manager.
But the problem as I mention in (https://forums.oracle.com/thread/2549716) my ObSSOCookie value is still loggedcontinue.
My Authentication return (ExecutionStatus.SUCCESS) Successful from the Java Code , and I am unable to login in the application. The thing is I can't manipulate ObSSOCookie from Java code.
I have apply Patch 12363955 to resolve this issue. But this patch is now to resolve this issue.
Have you any idea how to resolve this issue.
Thanks
Tamim Khan

Attaching USB Drive - Can't read AP configuration file, kills internet

Current network:
Airport Extreme (Sim Dual-Band)
Mac Pro (wired Ethernet)
MacBook Pro (wired or WiFi N)
MacBook (WiFi N)
2 x iPhones (WiFi G)
Airport Extreme in use for several months with no problems. All Macs can read/write it's configuration.
I hooked up a 1TB My Book USB HD to the Airport Extreme via USB. All three Macs (Mac Pro, MacBook Pro, MacBook) could see and read/write to the new drive. The Airport Extreme appeared in Airport Utility on all three Macs. Wired, WiFi N + G internet continued to work great... however none of the Macs could read the configuration file of the Airport Extreme. If I unplugged the USB drive all the Macs could read and write to the configuration file.
I plugged the USB drive back in and left it overnight. This morning, everything continued to work, with the exception that none of the computers could read the configuration of the AP.
Around 10am today the Macs/iPhones could no longer connect to the internet. I disconnected the USB drive and now the internet works again.

Hey David,
I know you said you read a lot of posts already and none of the other solutions worked, but just in case, if you haven't already I would run through the steps in here:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Manage MSMQ is missing from Failover Cluster Manager when configured using powershell

Hi,
I am hoping someone would be able to help me as I have looked on the internet for an answer to this. We deploy a number of servers that are configured using Powershell. I am in the process of creating a clustered WIN2K8R2 cluster with MSMQ. I am able to
do this successfully through the Failover Mgr with no issues. In addition, I can do this via Powershell (code listed below) with one caveat.
However, when I create the same exact MSMQ in Powershell, I am unable to right click on the MSMQ service to manage it as the "Manage MSMQ" is missing when I right click on it. The settings are the same, including dependencies. The only difference
I have been able to find is the icon in the Failover Manager shows the Service as a Generic Service icon when created in Powershell, but when it is created in the GUI it shows up as the MSMQ icon. I was able to verify this in the registry in HKLM\Cluster\Groups\<GUID>\:
GroupType HEX: 68 for msmq icon. When it is the Generic Service icon it is HEX: 270f. When I change it from 270f to 68, the icon changes in Failover Manager and I am able to open, but then I get an invalid handle and I am unable to manage it.
This is causing an issue, because I want to automate this build and hand it over, but they would be unable to manage it except by programming which the operators are not ready for.
Here is the code which I have created in Powershell:
    Write-host "Configuring MS MSMQ Cluster Failover..."
    $CluName = "Cluster Name"
    $ClsMSMQName = $CluName.Name + "MSMQ"
    $ClsMSMQResourceName = "MSMQ-" + $ClsMSMQName
    $Response = Read-host "Enter the IP Address of the Clustered MSMQ"
    $ClsIpRes = get-clusterresource "Cluster IP Address"
    $MSMQIpAddr = New-Object Microsoft.FailoverClusters.PowerShell.ClusterParameter $ipres,Address,$Response
    Add-ClusterServerRole -Name $ClsMSMQName -Storage "Cluster Disk" -StaticAddress $MSMQIpAddr.value
    # Add the MSMSMQ Service to the new Server Role
    Get-ClusterGroup $ClsMSMQName | Add-ClusterResource -Name $ClsMSMQResourceName -ResourceType "MSMQ"
    # Create Dependencies for the MSMQ group
    Add-ClusterResourceDependency $ClsMSMQResourceName $ClsMSMQName
    Add-ClusterResourceDependency $ClsMSMQResourceName "Cluster Disk"
    # Start MSMQ group
    Start-ClusterGroup $ClsMSMQName
You would just have to change "Cluster Disk" and "Cluster Name".
Thank you

Hi,
I am hoping someone would be able to help me as I have looked on the internet for an answer to this. We deploy a number of servers that are configured using Powershell. I am in the process of creating a clustered WIN2K8R2 cluster with MSMQ. I am able to
do this successfully through the Failover Mgr with no issues. In addition, I can do this via Powershell (code listed below) with one caveat.
However, when I create the same exact MSMQ in Powershell, I am unable to right click on the MSMQ service to manage it as the "Manage MSMQ" is missing when I right click on it. The settings are the same, including dependencies. The only difference
I have been able to find is the icon in the Failover Manager shows the Service as a Generic Service icon when created in Powershell, but when it is created in the GUI it shows up as the MSMQ icon. I was able to verify this in the registry in HKLM\Cluster\Groups\<GUID>\:
GroupType HEX: 68 for msmq icon. When it is the Generic Service icon it is HEX: 270f. When I change it from 270f to 68, the icon changes in Failover Manager and I am able to open, but then I get an invalid handle and I am unable to manage it.
This is causing an issue, because I want to automate this build and hand it over, but they would be unable to manage it except by programming which the operators are not ready for.
Here is the code which I have created in Powershell:
    Write-host "Configuring MS MSMQ Cluster Failover..."
    $CluName = "Cluster Name"
    $ClsMSMQName = $CluName.Name + "MSMQ"
    $ClsMSMQResourceName = "MSMQ-" + $ClsMSMQName
    $Response = Read-host "Enter the IP Address of the Clustered MSMQ"
    $ClsIpRes = get-clusterresource "Cluster IP Address"
    $MSMQIpAddr = New-Object Microsoft.FailoverClusters.PowerShell.ClusterParameter $ipres,Address,$Response
    Add-ClusterServerRole -Name $ClsMSMQName -Storage "Cluster Disk" -StaticAddress $MSMQIpAddr.value
    # Add the MSMSMQ Service to the new Server Role
    Get-ClusterGroup $ClsMSMQName | Add-ClusterResource -Name $ClsMSMQResourceName -ResourceType "MSMQ"
    # Create Dependencies for the MSMQ group
    Add-ClusterResourceDependency $ClsMSMQResourceName $ClsMSMQName
    Add-ClusterResourceDependency $ClsMSMQResourceName "Cluster Disk"
    # Start MSMQ group
    Start-ClusterGroup $ClsMSMQName
You would just have to change "Cluster Disk" and "Cluster Name".
Thank you

Reading 90xx configuration switches

Has anyone an example of how to read the configuration switches from the cRIO-90xx controllers. I want to read the status of the USER1 setting but haven't been able to find an example or a way to achieve this.
Thanks
Tony

Hi Tony,
You need to use the RT Read Switch.vi, located on the RT utilities palette. (See screen shot).
Note: You can only read the switch from the RT target, I attach an example RT VI in LV 8.2.1 format.
Regards
JamesC
NIUK and Ireland
Message Edited by JamesC on 05-01-2007 10:11 AM
Attachments:
User1_Switch_State.vi ‏14 KB
User1_Switch_State.PNG ‏100 KB

System configuration using java

Hi friends
Can I get System configuration using java code.
If yes plz suggest how.
thanks in advance.. Anjana

some bits and pieces are available see the details in
System.getProperties():
Properties sysProps = System.getProperties();
meration en       = sysProps.keys();
while ( en.hasMoreElements() )
//add the key=value pairs
Object keyObj    = en.nextElement();
String key       = ( String ) keyObj;
Object valueObj = sysProps.getProperty( key );
System.out.println( key + " : " +
+ valueObj.toString());
de]
just an idea??YES, and also you can do
System.getenv();but they also don't give all the info the OP was/is looking for.

Is it possible to delete message in the server using Mail configured using IMAP?

Is it possible to delete message in the server using Mail configured using IMAP?
Currently when I delete the message in Mail, the server still keep a copy of it, which means it is not deleted on the server. I know that POP can do this but I still want the option of being able to access it from other computers.
My server has only a small size, so I hope that I can just delete it from my Mail instead of having to log in to the server and delete it again.
Thank you.

yxchng wrote:
Is it possible to delete message in the server using Mail configured using IMAP?
Yes, but doing so will remove it from everything else.

Reading MAX Configuration using a VI

Similar Messages

Maybe you are looking for