Reading Status message

if there is any function module through which i can get the status message of inbound idoc with the help of idoc no(docnum) and status recore no .

Hi,
Please check FM EDI_DOCUMENT_READ_ALL_STATUS.
Regards,
Ferry Lianto

Similar Messages

How to Read Idoc - Segment fields values and status messages

Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
Kumar

You need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    MSG_ID   = EDIDS-STAMID
    MSG_NO   = V_MSGNO
    MSG_VAR1 = EDIDS-STAPA1
    MSG_VAR2 = EDIDS-STAPA2
    MSG_VAR3 = EDIDS-STAPA3
    MSG_VAR4 = EDIDS-STAPA4
IMPORTING
    MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a®

Mail does not correctly reflect read status of Gmail IMAP messages

Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

Message read status not changing (when changed on the server)

I have Mail set up to for Gmail using IMAP. I also have my iPhone set up for Gmail using IMAP. When a message gets marked as being read (either by reading it in Gmail, Mail or my iPhone) Mail does not update the status to read. If I read the message on Gmail or in Mail my iPhone updates the status to read. Shouldn't Mail update the status of the message to read when it changes on the server?

Try - https://www.cibc.com/ca/personal.html
https://cibc.com is not the same as https://www.cibc.com <br />The certificate is only valid for https://www.cibc.com , not https://cibc.com

Apple Mail message read status doesn't change when read

In Apple Mail, when getting mail from an Exchange 2010 server on the corp LAN works great. However, on about 2 out of 10 messages, after I read the message it still has the "dot" showing it as unread and I have to manually select mark > as read. I even let it sit for a while thinking it has to sync but no luck. I still have to manually mark it. Very frustrating. Any ideas?

To clarify something else, the unread mail badge disappears off of the app in the tray as well as the inbox in the lefthand column. But the blue dot remains on the conversation thread.

Online / offline, read/ unread status, message order

Kind of exhausting dealing with the UTTER JUNK skype software on a daily basis. As I sit now with my Mac and iPhone Skype in front of me, talking to the same person: * One of these devices says the person is online, the other says they are offline. * Message order is different between the different devices. * My iPhone is missing the last several messages sent for an hour now, even though I reboot, reconnect etc. * Unlike things like FB messenger, you can't tell for sure when they read the message. * Messages got stuck in the system for hours today (leading me to great personal strife). Why oh why do we use this junk when FB messanger has so far lifted the bar of good design, reliability and user interface over Skype which seems stuck in the 1990s, Skype can't release anything that isn't full of bugs, they don't release even basic new features, and it hasn't even been as reliable as it used to be 5 years ago for a long time. Just junk, that's all.

Hi, Don't wanna use the GMail app (don't like it really).Besides, this used to work perfect before the update, so it's clearly a bug. On other issue I found:When deleting a message which is open (using the trash can symbol at the top), sometimes the mail reappears when the app goes back to the inbox.When deleting using a swipe action, this never seems to happen.

Problem in showing progress image and status message.

Hi, friends,
I have file upload program in which when user uploads the file
i want to show animated progress file
i.e. ( circle.gif )
when upload finishes it should display message :
File < file name > uploaded successfully.
How do i achieve it ?
since when i am uploading file , image is displayed but
due to upload process image is hanged up and did not showing
animation.
Kindly solve the above problem.
i post my some code here.
============================
javascript part is here
function showProgress()
        document.getElementById('imgprogress').style.display = "";
     document.getElementById('imgprogress').style.visibility="";
    function completedupload()
     document.getElementById('progress').style.display = "";
     document.getElementById('progress').style.visibility="";
<div id="imgprogress" style="display:none; visibility:hidden;"><img src="images/circle.gif"></div>
                                                  <div id="progress" style="display:none; visibility:hidden;"><%= status %></div>
                                                  <div id="" style="display:none; visibility:hidden; "><img src="images/circle.gif" width="21" height="21"></div>since it is not working good.
please provide me good solution for this.
i need exactly following :
when user gives big file to upload it shows progress as animated image
and upload process finished up, it should remove image and display status message like " File Upload completed. "

I know this is an old topic, but I found the solution and thought I'd share it! By default, a JList only has 1 visible row. To allow the number of rows to expand dynamically, throw this in.
this.imageList.setVisibleRowCount(-1);My code looks like this. It centers each image and centers the text under the image and wraps images horizontally.
    ListCellRenderer renderer = new ImageListCellRenderer();
    this.imageList.setCellRenderer(renderer);
    DefaultListModel listModel = new DefaultListModel();
    this.imageList.setVisibleRowCount(-1);
    this.imageList.setLayoutOrientation(JList.HORIZONTAL_WRAP);
    this.imageList.setModel(listModel);and the renderer
public class ImageListCellRenderer extends DefaultListCellRenderer {
public Component getListCellRendererComponent(JList list, Object value, int
      index, boolean isSelected, boolean hasFocus) {
    JLabel label = (JLabel)super.getListCellRendererComponent(list, value,
        index, isSelected, hasFocus);
    if (value instanceof File) {
      File imageFile = (File)value;
      String path = imageFile.getAbsolutePath();
      Image image = Toolkit.getDefaultToolkit().getImage(path);
      image = image.getScaledInstance(100, 100, Image.SCALE_DEFAULT);
      ImageIcon imageIcon = new ImageIcon(image);
      label.setIcon(imageIcon);
      label.setText(path.substring(path.lastIndexOf(File.separatorChar) + 1));
      label.setVerticalTextPosition(SwingConstants.BOTTOM);
      label.setHorizontalAlignment(SwingConstants.CENTER);
      label.setHorizontalTextPosition(SwingConstants.CENTER);
    else {
      label.setIcon(null);
    return label;
}I need to work on this to improve performance, but it works!

How do you apply rules based on read status?

I migrated to Mail.app from PowerMail, and one of the powerful options available when creating a filter/rule in PowerMail was the ability to check the status of the message (message is/is not read) before applying the rest of the rule.
Is there a way to apply this same check within a rule in Mail.app?
This option is used to create rules that file mail ONLY AFTER it has been read.
Obviously, the user must apply the rule manually since rules are only fired off when mail comes in, or when one highlights one or more message(s) and then selects the "Apply Rules" option from the contextual menu or from the Message menu.
What makes this so powerful is that rather than having to manually file every message after you read it you can create rules that check status for read, if it is check to see if it matches other criteria, and if it does, put it in a folder with other like messages.
Like many people, I have a large number of folders and subfolders into which I file my messages. By creating such a rule, I only have to file a message that matches other criteria once, use that to set up the criteria for the rule, and on subsequent messages that match that criteria, I only have to apply the rule after I have read it.
I could just file all the messages directly into their appropriate folders, but then I have to keep watch on the subfolders for new mail, rather than just watching the inbox, reading the new mail, then using the Apply Rules item to have the read message checked and then filed based on the criteria that it matches.
The logic might look like this.
Is Read status true
AND
The subject contains "Intranet"
THEN
Move message to /On My Mac/Work Mail/Current Projects/Intranet Project/ mail folder
THEN
Stop processing rules.
Without the ability to test the message's "read status" I have to select the message, right click to select "Move To>" from the contextual menu, then mouse through four sub panes to put the read message in the folder where I want to store it.
I also cannot select a number of read messages and use the Apply Rules option to allow my filing rules to move any number of read messages to their proper storage folders.
If anyone has a method for doing this, please let me know. It is the one thing I miss most about PowerMail.
Message was edited by: rnsyderpsu

I have been doing some of this, and while it does provide some of the functionality that is lost without the ability to apply rules only to read messages, it is not a complete solution. One of the biggest drawbacks is that it is not easy to selectively limit what new mail shows up the smart mailbox. One approach that works, sort of, is to limit the smart mailbox to only messages from people in my address book. However, not all relevant messages are from people already in my mailbox, so it requires constantly double checking to make sure that things are slipping through the cracks.
The best thing about being able to apply rules, after receiving them, based on the status of a message is that it puts the control in the users hands. It allows you to selectively apply rules, only when you want to apply them. Rather than always/never, you have the ability to apply rules "sometimes/as needed." It allows for fuzzy logic, rather than hard conditions.

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

How to stop HP Annoying Status Message Windows?

Before posting this message now (July/2014) I've searched for related posts here. I found one from 2009, whose author got a solution through an answer only in 2012 (pasted bellow). I have the same problem: I'd like to stop the invasive alert messages from HP Solution Center without uninstalling the software, which is very good, but for these annoying stupid messages. I say stupid messages, because everytime I seat in front of my desktop it insists telling me, for example, that I have a problem: the language in my HP printer doesn't match the language in my computer. But this is not a problem, it is my personal option! Anyway, HP Solution Center keeps poping up everytime I awake my screen and this is really annoying, even it its messages were accurate. HOW TO STOP THEM? As I said, the solution found here in the forum after 3 years (2009-2012) doesn't work for me, because there is no "status messages" in my "device settings" (Windows 7), so I could turn them off. I'd appreciate any help!
SOLUTION: To stop HP Annoying Status Message Windows.[ Edited ]
‎05-26-2012 01:05 AM - last edited on ‎05-26-2012 10:13 AM
Hi, Friend I have solution how to stop HP Annoying Status Alert .
WIndows 7
First Click START>CONTROL PANEL>PRINTERFAX>
Select Your Printer And Go to Properties
Click Device Setting > Select Status Message OFF Option
Press APPLY And Ok
Reset Your Computer

Hello Fernando_int, and welcome to the HP Forums.
I see you are recieving false errors. I would like to assist.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How can I insert the reusult of a failed test of a secuence in the status batch result status message box ?

Hello, I'm totally new to programming. I started with LabView and test stand to make some test as VI's. When test stand secuence ends, the batch result box (batchmodel.seq) pops out for the several uut's tested in every socket. I'd like to add to the status message the information fo the test wich failed instead of searching this info in the xml (or html) report.
Joel Urbaez
Test Engineer ,
Napco Alarm Lock Intl. Group.

Hi Joel:
Every report in TestStand comes with message on top of the report (below the header) that tells you which step in the sequence caused the failure. Hence, you do not need to read through the entire report to get this information. If you still want to use the banner to report this information you can do the following:
1. After the sequence has executed you will have to add a step in the Post-UUT sequence.
2. Here you can either choose to show a message popup where you can display the step that failed
3. You would have to use the following variables:
If ( RunState.Sequence.Locals.ResultList[0].Status = "Failed") ? RunState.Sequence.Locals.ResultList[0].TS.StepName
4. You can also try to modify the modelsupport2.dll file for the functions that bring up the popup banner to add more information.
Thank you
Nandini
NI

How can I make the status messages appear IN the status bar / add-on bar instead of floating ABOVE the status bar? (like it used to)

now that I have the status bar back, why won't it show the status messages IN the status bar?

The Status-4-Evar add-on can do this, it makes the add-ons bar behave in a similar way to the status bar in Firefox 3.6 and earlier.
https://addons.mozilla.org/firefox/addon/status-4-evar/

How to give out a status message indicating the number of fields selected

Hi experts,
I hope some one might have done what I'm trying to do. Could some one please show me how to give out a status message saying for example how many fields have been give out(or selected) in the t_ouput in an alv grid? Is there a FM that could do this? I mean like giving the FM the t_output and it will show a status message with the number of fields selected?
Thank you for your input.
Nadin
Message was edited by:
nadin ram

Hi Ram,
Write this code,
Message 'Select Only Ten Fields' type 'I'.
It displays The Message in Message Box.
Or if you want the Error Message means,
Message 'Select Only Ten Fields' type 'E'.
Thanks,
reward If Helpful.

"Read" status of e-mail will not sync wirelessly between Lotus Notes and 8520??

HI,
This is my first post and I realize that this might not be the right area to post this question but my question did not seem to fit anywhere else.
I was recently issued a BB 8520 at my new company and we work in a Lotus Notes environment and I believe it is version 7.
This is not happening to anyone else that I know of in our company but when I read an e-mail in Lotus Notes from my desktop, wireless sync will not mark it read on my Blackberry. Also when I read an e-mail on my BB, it will not mark it read in Lotus Notes. However if I delete an e-mail in Lotus Notes, it will delete it from my BB via wireless sync. Finally, when my BB is attached to my desktop via USB, and I do a manual sync from Blackberry Desktop Manager, it will sync the "read" status of my e-mails between Lotus Notes and my BB.
So I guess my question is why are most sync functions working via wireless sync between my e-mail in Lotus Notes and my BB, but not the "read" status of an e-mail? And I know that it works for other users in our company so it's really bothering as it is a whipping to have check e-mails that are still marked as unread (in both Lotus Notes and my BB) when I have already read them.
Thank you and I would really appreciate any help or information that I could provide to our IT Admin at work to help him solve my problem.
Thank you,
Matt

Hi and welcome to the forums!
Looks like you posted in the right device forum and your post is very clear!
First open the main message queue, menu key options, email reconciliation, is wireless reconcile on?
Some "light reading" that may address the issue as well is attached below.
Let us know how it goes!
Thanks,
Bifocals
Unread marks synchronization is inconsistent between BlackBerry smartphone and IBM Lotus Notes
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem with SCCM 2012 R2 Component status messages

Hello,
I have a strange problem with Component status messages. When I try to view all messages from any component, I receive an error message stating that the data could not be recieved from the database. Reporting point is installed.
And when I try to run a report, nothing happens. The report doesn't run.
Any idea??

Oooopsss... Status messages disappeared again !! nothing suspect in srsrp.log and compmon.log.
There are these entries in compsumm.log that got my attention
The machine account will be used for ["Display=\\DataBaseServer.domain\"]MSWNET:["SMS_SITE=CPS"]\\DataBaseServer.domain\.~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.643+300><thread=3152 (0xC50)>
Successfully made a network connection to \\DataBaseServer.domain\ADMIN$.~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.643+300><thread=3152 (0xC50)>
Failed to read Operations Management component registry key values on DataBaseServer.domain; error = 5 (0x5).~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152 (0xC50)>
Failed to read in current property values and initialize COpsMgmtComponent object; error = 5 (0x5).~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152 (0xC50)>
Error: Failed to initialize the COpsMgmtComponent object for component SMS_SITE_SQL_BACKUP_S206UT24.CSDPS.QC.CA on machine DataBaseServer.domain. : L’opération a réussi.~~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152
(0xC50)>

Reading Status message

Similar Messages

Maybe you are looking for