Ready to give up on Blackberry DM

I have followed every instruction I could find to uninstall my 5.0 DM. Nothing works. My OS is a 64bit Vista Home Edition. The error is "1402 could no open key" I have tried everything I can think of , I'm out of ideas
Please someone help !!!!

Hi there!
Sorry, but saying that you've tried everything you can find doesn't say if what I'm about to suggest is redundant or not...but it's the best I've got for you...apologies in advance if it is redundant.
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Ready to give up on blackberry

i have already found myself increasingly frustrated with how long it takes for webpages to load on my phone. Now i'm unable to get emails from my gmail account. I had a prompt from gmail to change my password. I did so and since then I was encouraged to change my password for my Gmail acct., which I did. But now, my Blackberry won't validate my new password nor does it acknowledge my old one. So I'm getting none of my emails on my phone. i tried deleting my gmail email account but now my Blackberry won't even allow me to add it because it continues to say my password or email address is invalid.
please help

Hi and welcome to the forums!
Complete the appropriate action listed in the resolution section.
Thanks,
Bifocals
KB04792 Unable to receive email from an integrated Gmail account on the BlackBerry smartphone
"Summary of Causes
This issue may be caused by one of the following:
The Gmail account is currently not validated.
The global filter is set to prevent email messages from being forwarded to the BlackBerry smartphone...
Important: For additional causes, see KB02169."
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

I am ready to give up on the Iphone RE: emails

I have a few more days left in my return window, and I am seriously considering it. I wasn't able to send emails, but receive them, so I took the iphone back to AT&T and he redid my settings, tested it while I was there and was able to get the phone to send an email. I emailed a test email to my friend and almost immediately got a response from her that she had received it. I was able to reply with no problem. Now, a couple of hours later, I am at home and I can't get it to send an email. It seems to get hung up on sending it and takes forever for it to finally give me an error message which usually says something to the effect of a failed server or something. I have wanted this phone for so long and want to love it, but honestly, I am ready to give up on it and get something else. Can anyone help me figure out what I am doing wrong????
Heather

Ok, that CWMX.COM bit is proof now to me it is because BellSouth blocks you from sending unless on their network. that is a free server (workaround) to send. It is needed when on Edge. But now that you are home and on WiFi (which is a prefered connection as it is MUCH faster) now while on WiFi, you ARE on their network and they don't like you using the free server. You need to have it set to what your network (ISP) wants (which is what you computer has setup on it if you look at those settings, odds are same as incoming).
So here is the issue you have.
The guy set it up that you can send email anytime you are on Edge (which will be when you are not home on your WiFi network).
When at home, you cannot send email while on wifi unless you temp. turn off WiFi (where you just said you saw where). If you turn it off, you can send. Then you can turn WiFi back on to get fast speed with internet again.
So all in all not too bad. When not at home, you can send. When at home...well you have your computer for email....but if you need to send via phone, you have to turn off wifi.
Once again, this is BellSouth stopping you not the iPhone. You may consider getting a free email account elsewhere (gmail for example) and telling all your friends to email you there from now on and just use bellsouth for junk mail, shopping, etc.

Absolutely Stumped and Ready to Give Up

Hi all...
I've been searching and searching through the forums and the help articles to find out how to fix this problem, and I absolutely cannot figure it out. It makes no sense to me.
I cannot get the binding navigator to save changes to the database. I've created a new project, tried on different computers and still does not work no matter what I do.
Here's what I've done so far. I've added a new form to my project, completely blank and new. I've taken a Table from an SQL database and dragged it from the Data Sources Window onto the form, just like I should do. As usual, the bindingnavigator, bindingsource,
tableadapter all show up. When I check to see what is in the SAVE button, the following code is present, which all seems fine to me:
Me.Validate()
Me.Table2BindingSource.EndEdit()Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
When I run it, I can of course add rows, delete rows, change data in rows with the binding navigator, but anything I do does not show up in the database after having clicked the save button.
I've checked to see if the binding source is recognizing that there is changes to be made (.haschanges) and it indeed knows that there's changes to made. I've verified this a couple ways, one way is by doing this:
MsgBox("hi")
Me.Validate()
MsgBox(Me.Database1_Data_Set.HasChanges)
Me.Table2BindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
MsgBox(Me.Database1_Data_Set.HasChanges)
The first messagebox I used to make sure that the clicking on the save button was actually fired. Indeed it is. I have it messagebox me before the .updateall and after...which comes up as it should, which is haschanges=true before the update and haschanges=false
after the update. I have even tried adding the acceptchanges command after updating all. None of this works. It never saves to the database. I've trapped the code in a TRY and catch with a messagebox if there are any errors, and no errors come up.
I've tried the infamous changing of the .xsd and .mdf property CopytoOutputDirectory to if newer and even tried do not copy, and none of these fix the problem, it still persists on not saving to the database. The database I am using is a very simple database,
literally one column with generic words like 'red' 'blue' green' frank', etc. I made it simple on purpose so I could see if it was a table issue, but still no saving to database.
This is a local database. I'm completely stumped and ready to give up. No matter what I do, it does not work. I need help on this if you're willing.
One thing I have noticed is that after I click the save button, if I then close the form but stay in runtime, then re-open the form, the data that I changed is still showing on the binding navigator. I also put a button on the form and had it refill the
data to see and when I click it, the data on the binding navigator reflects the changes I made.. HOWEVER, as soon as I end the program, hit stop on the build and then re-play it, go into the the form the data is back to where it was from the start, and nothing
is changed. So it seems like it is showing the changes during run-time, but never actually updating the root database file, and when it's shut down it loses all the changes that it shows (not that it matters, because it's not even updating the database).
The database and its table have no special settings, just a plain old database created through the wizard, and one column of simple data of about 5 rows or so.
Can anyone help at all? If I can't save changes to the database, then it's over.
BTW i'm using Visual Studio 2013.

Thanks both for your replies. I really appreciate your help. I'm not sure what you mean by keeping SQL studio manager open, make change in the physical database then refresh in server manager...I messed around and tried to figure that out, but I don't think
I was even in the right place (SQL server object explorer?)...
The tool I use to see if the database is updated, is by viewing the data in the SERVER EXPLORER. I hit refresh first then right click the table and choose show data.
I ran this code on a button press:
Dim sqlConnection1 As New System.Data.SqlClient.SqlConnection("Data Source=(LocalDB)\v11.0;AttachDbFilename=C:\Users\STyler\Desktop\vs10\Database1.mdf;Integrated Security=True")
Dim cmd As New System.Data.SqlClient.SqlCommand
cmd.CommandType = System.Data.CommandType.Text
cmd.CommandText = "UPDATE Table2 SET [Depth] = @Depth WHERE [ID] = 2"
cmd.Parameters.AddWithValue("@Depth", "gfakjld")
cmd.Connection = sqlConnection1
sqlConnection1.Open()
cmd.ExecuteNonQuery()
sqlConnection1.Close()
...and the change was made in the database. It's just not updating through the binding navigator.
Can you further explain how I would go about using your suggestion about:
If the database is SQL-Server then keep SQL Studio Manager open, make a change in the physical (thinking not on the server) database then refresh in SQL-Server Manager?
Thanks both...

Ready to give up

I am truly ready to give up on Photoshop Elements. I just purchased version 10 and had problems from the beginning. I asked several questions about why all my photos will not appear in my folders in Folder View in Organizer. I have followed all instructions I could find, but Organizer just spins and spins and takes forever to show anything, And then it only shows partial contents out of order or now, nothing in any folder at all. If I tell it to import again, it tells me the photos are already in the catalog. I have uninstalled PSE completely, removing ALL folders which were missed in the uninstall. I have done this twice. Also, I told it I did not want to back up/sync online and discovered it had already backed up 1.6g. I could not find how to access this online backup to clear it. So, before I jump up and down on the disks, any help or link to real-time help would be appreciated. Thanks for listening to me vent, but after 5 days of struggling I am desperate!

The folder location view shows all the images of the folder selected in tree hierarchy. So if you want to see all the images present in catalog you need to switch to thumbnail view or import batch view. You can access your online backup by signing to photoshop.com with credentials. On Photoshop.com, under libraries you will find all your backed up data.

Getting old touch ready to give to another

I've seen part of this question answered, but I still have questions.
I've bought a new touch for Christmas and will give my old touch to my daughter who uses a separate computer. I see I should do a restore to wipe out my songs, etc. to get it ready for her use.
Does this wipe out the updates that I've paid for and download onto the touch? I wouldn't want to have to buy the updates again for the same iPod.
When she connects it to iTunes on her computer, will it still recognize that that it was assigned to me and try to attach it to the iTunes songs that I bought for that device?
Thanks, I just want this to go smoothly on Christmas day and not have problems then.

Erase all content and settings: Connect iPod touch to your computer or a power adapter. Choose Settings > General > Reset and tap “Erase All Content and Settings.” That will wipe out all traces of the previous owner. When she connects to her iTunes, it will be like a new device and only sync the selections she makes from her iTunes library.
The OS upgrade will need to be purchased again as it is tied to your iTunes account, not hers. The good news is that the price is now US$ 4.95 and the latest update includes all previous updates. http://www.apple.com/ipodtouch/software-update.html

I'm ready to give up on the

i just got my zen micro on Friday night, and it's dri'ven me to so much frustration that I'm about ready to sell it off after just 2 days and swtich to iPod instead.
st thing i got it on Friday was to charge it up fully and started loading songs. Who knew, lucky me got one where the headphone jack didn't work. only the left earphone had sound, so i had to take it back and get it changed on Saturday. after charging it till 3am last nite, i started to d/l songs onto it, but met up with the language problem. All my chinese songs titles wouldn't display properly. After spending 2 hours fiddling around with Creative mediasource, Zen micro explorer, windows media player, windows explorer, and checking out this forum, and changing all the settings as pple had posted on this forum, i gave up and went to sleep.
this morning, i decided to try again, yippee, the chinese fonts worked well. But i still can't see chinese fonts on Creative mediasource. I have to use win media player or ZM explorer to transfer songs. BUT! but now, i'm trying to d/l more songs, so I connected the USB cable, and voila! the 'Docked' screen doesn't show up! the USB port is detected (mine is USB. so win xp shows a warning message), but none of the programs detect the Zen Micro. it's as good as not being connected at all, so i can't d/l anything now!!!
another thing is the s/w provided with the Zen Micro is totally not user-friendly at all. When i first installed it, i got 2 pages of gibberish where i had to select something from 2 drop-down menus, before reaching the page where they install the 4 s/w. so i totally have no idea what i selected in the 2 pages before. And i still haven't figured out how to use Creative mediasource (no idea which panel shows what info) and how to display languages on it properly.
i'm not some genius at computers and gadgets, but so far have found it painless to install/use my VCR, VCD and DVD players, palm, no-name mp3 player and loads of other s/w, so why am i having so much problems with the Zen micro!!!
Can somebody pleeaseee help me with the USB thing and explain the s/w installation thing, before i decide to blow the $400 and start bashing it on my table. arghhh!

the language thing is the least of my problems right now. i actually managed to figure it out somehow. right now the ZM displays Traditional chinese nicely, but only if i use the Zen Micro Explorer or Windows Media Player to transfer the songs. I now have the same problem as cvmc, the songs that have Simplified Chi or Japanese shows up as gibberish. Is there some way to make Trad Chi, Simp Chi and Japanese display nicely all at one time?
Anyway, right now, since the ZM doesn't detect the USB cable when i plug it in, there's nothing i can do at all. My computer detects the ZM, but the ZM doesn't show the "Docked" screen,
i really don't know what to do now. Do i take it in to Creative for another exchange? or what?
I was thinking of getting more stuff from Creative, but just one experience has really put me off buying Creative products

FR query ready export gives error

Hi
We are exporting a FR report in Query ready mode to Excel but its giving javascript error as Permission Denied.
Any idea.
Thanks

You could check this IE settings :
1. From the Tools menu, click Internet Options.
2. Click Advanced.
A. Scroll to "Disable script debugging". Check the option.
B. Scroll to "Display a notification about every script error". Un-check the option.
3. Click the Security tab.
4. Click Internet, and then click Custom Level.
5. In the Security Settings list, scroll to Miscellaneous.
6. Set "Access data sources across domains" to "Enable" or "Prompt".
Thanks...

Distributor is not ready to give me new pair of mobile

i have purchased one blackberry curve mobile on 01/04/2011 and after 20 days only there was a complain in that and the company gave me the do letter on 25 april and after that i gave to the shop (Ramdev Telecom) sanpada but they have yet not given me new mobile .They are saying that sent to distributor which is in lower parel and distibutor is saying that they dont have any stock .How many days it take i m totally fedup with all these thing i just want that my case to solve as soon as possible because 1 month has passed and i have not received a new mobile

hello sauravsaket86,
what is a do letter ? can you explain in other words what is your exact issue ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I'm ready to give up!!!!!

So I went to underwriting last week and had to get comments removed from my report from resolved accounts. I got all comments removed and none of my scores changed everything remained the same for a week. I constantly monitored scores and paid for my Transunion 1B report for three days in a row including yesterday to make sure my mortgage score didn't drop. Each time I ordered a new report the mortgage score remained at 629 which is the original score that was pulled two weeks ago.
Well I did one last report order at 9:37pm last night and my mortgage score was still at 629 then last night at 11:30 pm my lender pulled new reports and I was confident that everything was ok because I just ordered less than 2 hours ago. At 8am this morning my loan officer sent me an e mail stating my credit score is now 602 which is my score for my Transunion 8 but not my Transunion mortgage score. The mortgage score is what was pulled before. I'm so confused because the mortgage scores always matches up with my lenders score. How is it they now have my Transunion 8 score but not my Transunion 4 score which is the score they used last time?
I explained to my lender that none of my scores changed and the 602 is from Transunion FICO 8 and the pull last week was from Transunion 4 which was and is still at a 629. He didn't address my question but, told me he needs my landlords info to confirm the past 24 months of paid rent. I gave him my landlord's info and explained the score confusion to him again and asked if he had any insight and now with the lower score can I still get the loan. I haven't heard anything back from him and now I'm super scared.
I'm suppose to close on the 21st and don't know what's going on!!!! I'm not for sure if he's looking for a new lender or working with my current lender. I'm so confused it's a FHA 30 year fixed for $133,000.
I'm soooooo confused why my Transunion mortgage score from myFICO has been exactly matching the lenders score now the score they pulled matches my Transunion FICO 8 score but, it's the same lender! I don't know what's going to happen now and I want to throw up and give up! Any advice or insight would be great!

msklassy wrote:
So I went to underwriting last week and had to get comments removed from my report from resolved accounts. I got all comments removed and none of my scores changed everything remained the same for a week. I constantly monitored scores and paid for my Transunion 1B report for three days in a row including yesterday to make sure my mortgage score didn't drop. Each time I ordered a new report the mortgage score remained at 629 which is the original score that was pulled two weeks ago.
Well I did one last report order at 9:37pm last night and my mortgage score was still at 629 then last night at 11:30 pm my lender pulled new reports and I was confident that everything was ok because I just ordered less than 2 hours ago. At 8am this morning my loan officer sent me an e mail stating my credit score is now 602 which is my score for my Transunion 8 but not my Transunion mortgage score. The mortgage score is what was pulled before. I'm so confused because the mortgage scores always matches up with my lenders score. How is it they now have my Transunion 8 score but not my Transunion 4 score which is the score they used last time?
I explained to my lender that none of my scores changed and the 602 is from Transunion FICO 8 and the pull last week was from Transunion 4 which was and is still at a 629. He didn't address my question but, told me he needs my landlords info to confirm the past 24 months of paid rent. I gave him my landlord's info and explained the score confusion to him again and asked if he had any insight and now with the lower score can I still get the loan. I haven't heard anything back from him and now I'm super scared.
I'm suppose to close on the 21st and don't know what's going on!!!! I'm not for sure if he's looking for a new lender or working with my current lender. I'm so confused it's a FHA 30 year fixed for $133,000.
I'm soooooo confused why my Transunion mortgage score from myFICO has been exactly matching the lenders score now the score they pulled matches my Transunion FICO 8 score but, it's the same lender! I don't know what's going to happen now and I want to throw up and give up! Any advice or insight would be great!Scores are a point-in-time reflection of your credit profile. I cannot comment on scores without knowing more about one's credit profile. I will state that score drops after removal of dispute comments are common. The lender-pulled scores are all that matter ... although you can get your mortgage scores through myFICO too. What is the source of the scores you are using and what does your credit profile look like. A file generating with disputes and a 629 middle score is a borderline file. Your loan officer should not have submitted your file to underwriting until a new lender-pulled report was done after the disputes were removed.

Ready to give up on K7N2

I have tried 2 different motherboards (RMA'd one), 3 different types of ram:
Kingston Valueram PC3200 256
Crucial PC2100 256 (worked for 1 night)
Apacer PC3200 512
This is ridiculous. I've tried other power supplies, ones rated above what you guys suggest, and I still can't get this thing to post. I don't know what else to try. If I can't get this to work I will never buy an MSI board again.
Does anyone have any last suggestions before I give up completely on MSI???

I know, that's why I tried Crucial and Apacer as well as a friend's generic. I've never had any problems with Abit so I'm going back to them.
This is a great forum though, seems a lot of people really like these boards but also a lot have problems, just too bad for me...

How do I prepare my mac ready to give to someone else?

I want to give my old mac book pro to a friend, I want to verify this transaction, so that the mac book is now in his name, can this be done ???

You may follow these instructions:
http://support.apple.com/en-us/HT201065
Ciao.

Error #2035 i'm at a loss. Ready to give up.

So i bought a template from Flashmint.com, then made some changes, and went to go test it out..went to the URL and the first thing I'm hit with is the loading bar, and "error #2035" figured it was something small, contacted tech support of the template. Thinking it was a template issue, having them slowly help me figure it out, i got partly the template working.
I soon got it so it can load the whole thing, but I was getting another error loading some media files..Started with a #3xxx can't remember exactly.
The template works PERFECTLY fine in Internet Explore, and i have had a few friends test it out in chrome. In Fire Fox is where I'm having the issue, it will load one time, and then not the next time.
I'm beginning to think its my host, but that techsupport is saying its something with the flash, however, i uploaded it on a free host and the template works perfectly fine in firefox on the host.
This is the one that doesnt work in fire fox:
http://esfvisions.com/test/
OR
http://esfvisions.com/test2/
the one that DOES work in FireFox:
http://evanfphotos.x10.mx/Flash_website/
They all work 100% fine in Internet Explore, and Chrome. I'm having the issues in FireFox.
Just for the record, my website is hosted on Debia. From Fatcow.com
Message was edited by: 06fg2 - I have re-installed firefox, and it worked for some time. I have also deleted Cookies, and Cache. Works, then it goes back to the same thing.

I tired what you suggest..This is all i'm getting.
http://esfvisions.com/test2/ the same error, but it just loads off to the side. No other error suggestions or anything.
The steps all i did was: open Flash -> open main.fla -> File -> publish settings -> flash -> permit debugging -> publish -> re-upload -> and thats that. I changed main.html to index.html since i'm assuming thats what needed to be done.

I added a persona, I've disabled and removed that persona, it keeps coming back. Going into tools does not help, adding a new persona does not help. I'm ready to give up on firefox!

I added a persona, wanted a new one so disabled and removed the old one. I added a new persona, but the old one keeps coming back. Going into tools/add ons does no good because it is not even listed anymore but keeps coming back. I've shut down/restarted, I've searched for answers to this problem.

The data that specifies which persona to display is stored as a pref in the prefs.js file in the Firefox Profile Folder.
Did you try to rename or move the prefs.js file and a possible user.js file to see if that helps?
Are you using the Personas Plus extension, because in that case you need to check the settings in that extension.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Ready to give up on Blackberry DM

Similar Messages

Maybe you are looking for