Real Memory vs CPU usage?
I have a few questions:
- Should I look at CPU or Real Memory to find out which applications are eating a lot of power?
- Moreover, looking @ my activity monitor, I noticed Firefox and iTunes and Mail eating up much memory, is this normal or is this a Lion issues.
- What is " Kernel task " as conveyed in the image.. It is using up almost 1GB of ram!
- Moreover, am barely running anything huge, like AutuCad, and yet I have used 4.75GB of ram?
Kernel Task is the OS - kill that and you won't be able to run anything
You're not using more than half the 8gb you have so don't worry about it.
Change Activity Monitor to show My Processes to see the sort of things you can safely play with.
Regards,
Colin R.
PS Mine looks like this:
Similar Messages
-
How to check the memory and CPU usage on NPU
Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR -
Hello All,
Below is the server configuration,
OS: Windows 2008 R2 Enterprise 64 Bit
Version: 6.1.7601 Service Pack 1 Build 7601
CPU: 4 (@ 2.93 GHz, 1 core)
Memory: 12 GB
Page file: 12 GB
1. The actual utilization, be it a 15 minute sample, hourly, weekly etc, the utilization of real memory has never crossed 20% and the page file usage is at 0.1%. For some reason, the Pages/Sec>Limit% counter reports 100% continuously regardless of the
sampling intervals. Upon further observation, the Page Reads/Sec value is somewhere between 150~450 and Page Input/Sec is somewhere between 800~8000. Does this indicate a performance bottleneck? (I've in the interim asked the Users, App. Owners to see if they
notice any performance degradation and awaiting response). If this indicates a performance issue, please could someone help list down how to track this down further to which process/memory mapped file is causing it? and what I should go about performing to
fix this problem please?
p.s., initially the Security logs were full on this server and since page file is tied to Application, Security and System logs, this was freed up to see if this is causing the high page reads but this doesn't.
2. If the above does not necessarily indicate a performance problem, please can someone reference few KB articles that confirms this? Also, in this case, will there be any adverse effects if attempting to fine tune a server which is already running fine?
assuming App. Owners confirm there isn't any performance degradation.
Thanks in advance.Hi,
Based on the description, we can try to download Server Performance Advisor (SPA) to help further analyze the performance of the server. SPA can generate comprehensive diagnostic reports and charts and provides recommendations to help you quickly analyze
issues and develop corrective actions.
Regarding this tool, the following articles can be referred to for more information.
Microsoft Server Performance Advisor
https://msdn.microsoft.com/en-us/library/windows/hardware/dn481522.aspx
Server Performance Advisor (SPA) 3.0
http://blogs.technet.com/b/windowsserver/archive/2013/03/11/server-performance-advisor-spa-3-0.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Huge Memory Leak, CPU Usage
We are noticing in several of our apps a very bad memory
leak. See the below code. Its called every 100ms to process any
messages as we use this like a queue system. Overnight, not a
single message was sent...as the app was just sitting idle on my
screen. My server log confirm this, not a single post was done.
However, memory usage jumped 300MB, and by the end of today, my
browser is going to crash when it runs out of memory.
The memory leak seems to be directly related to the
setTimeout function, as that is the only thing being called
here...there was nothing put on the queue all night.
Specifically, Iw as at roughly 50MB of memory usage yesterday
afternoon. After a bunch of testing, the memory usage was up to
175MB. Overnight we are now over 475MB. This is the internal memory
used by Flash, and my Activity monitor confirms this.
This issue happens on OS X, and Windows XP, Flash 9 and Flash
10. In 3 different application we have that do this sort of queue
setTimeout loop.
Anyone else seeing this?
How can I work around this?
Thanks,
Ben"Ben Spink" <[email protected]> wrote in
message
news:gonn46$afd$[email protected]..
> How would either of those resolve the issue?
AFAIK, there are no inbuilt memory leak problems with using
an enterFrame
event handler. LiveCycle Data Services will push the
information to you, so
you don't have to constantly try to pull, so to speak..
> I'm just looking for a fast timer situation that is
polling my queue for
> any
> requests that need to be sent.
>
> More importantly...why does this issue exist? Why hasn't
this issue been
> fixed...it seems its been around for quite some time.
It's possible that it's not Flex, but you. Are you constantly
adding event
listeners without removing them? Are you removing objects
from the stage
without removing all references to them?
> I can't leave my browser open in the background if I
have a flex app open.
> Its going to hang my browser and system...as its already
done during a a
> live
> demo to a customer.
>
> There are other bugs, and I can excuse them, but
something as basic as
> this
> creating a memory leak is really terrible.
I wouldn't be so quick to blame Flex. You have to make sure
you clean up
after yourself, or you can cause these types of issues with
your code. -
Problem with memory usage and CPU usage
Hello,
i have a problem with the memory usage and cpu usage in my project!
My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
After 3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
What can I do to reduce this huge recource usage?
Thank you!Hi Pahe,
I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)? Or just post a JPEG of the piece of code that can give problems...
I guess you're appending data to an array instead of replace data elements, but I can't be sure...
Have a nice day!
graziano -
I've cleared cookies multiple times
I've emptied the cache
I cleared my download history, and a majority of my browsing history
I've tried having hardware acceleration for both flash and firefox on and off
I turned off all my apps and plugins and when that did nothing I turned back on the ones I need. I never had a lot of apps to begin with. only a max of 5. I had quite a few plugins, but i disabled all but quicktime, flash, and silverlight. I have those three set on "ask to activate" so none are "always active" anymore.
I also tried a couple things from the FAQ and forums here about changing a few settings in the "about:config" setup.
A few of the above things initially worked, but after a day or two it'd be back to sucking up my CPU and memory. I would then try the same thing again, and this second time there would be no improvement.
The real memory will fluctuate between 200 MB and 1.7 GB, and has done so for quite a while.
Even after I've left streaming sites, and sites with lots of images, and I'm not downloading anything, the memory and the CPU will still do that. I only have a handful of tabs open at a timeusually, and all of them are mostly text. I'll quit and reopen firefox, which will initially bring the memory and CPU usage down, but it inevitably climbs up quite quickly, regardless of my tab usage. It'll be the same if I'm playing a flash game or scrolling through blogs.
I never had any of these problems with Firefox 23, and my internet usage habits haven't changed at all. I had some of this slowness a few times with version 24, but nowhere near as bad as this, or as constant. Almost everyday I end up googling for other ways to speed things up. Everything I do never slowed down Firefox on earlier versions.
I've tried all my usual tasks on Safari which will never climb above 30-40 MB of memory, even on netflix streaming, or flash games, and the CPU will average around 8 and 11%.i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
thanks -
Distiller 8 and 9 both locking up, 100 % CPU usage
Not sure if its related, but probably, since it happened right after...I just transferred everything from my quad core mac pro to my new 8-core Mac Pro. Everything went well, but now Distiller 8 starts and then sits and gives the beachball of death, and one of the cores shows 100% cpu usage. (I have that utility that shows memory used, CPU usage, etc.). I hadn't bought Acrobat 9 yet so I downloaded it and installed, and Distiller 9 does the EXACT same thing. The ONLY thing I can call an "error message" is that I can see in the window after it launches is "Error in /Library/Application Support/Adobe PDF/Settings/PDFX4 2007.joboptions:/CheckCompliance out of Range."
That message may have been there whole time, even when it worked, though. I don't know. At any rate, I need distiller working! Any ideas?Glad to hear all is well. Preference files can cause big problems. Eons
ago, in the 1980s, I used a communications program called Red Ryder. I
loved the program. After it was updated to a new version (it might have
been called White Knight by that time), I started to have terrible
problems. I wrote to their technical support. They couldn't duplicate
the problem. It couldn't happen etc. I eventually got a little hot under
the collar. After all, if I couldn't use my modem, I couldn't check my
email, etc. It turned out to be a problem with my preference file when
converted to the latest version, that was causing the problem. Since
they always started with a new preference file, they couldn't duplicate
the problem that was obvious to me.
...Mike -
100% CPU usage in DW CS5 when opening page...
Hi there, I'm new here!
I'm working on my site in DW and have already completed another site without having this problem. I open a *paticular* file, and my CPU usage goes to 100% when I use the split view. In code, DW runs fine, but as soon as it tries to render a preview (not in live mode) in the second pane, it starts going quickly between (notresponding) and very slow response. So it's slow or nothing!
This page is using some z-index in the CSS and flash, so I don't know if maybe it's just my processor speed isn't up to it?
I have tried it on my downstairs desktop (quad core, can't remember exact specs but could look it up, but it's faster than my ltop, obviously..), and it works slightly better. Does DW use scratch disks? Is there a way to turn off some CSS properties in the display to improve performance? I can work just in code for a lot of my work, but for placement it is much more intuitive to use a split view for me. HELP! (Please and thank you!)I am having a similar problem with some files when working in split view. I have been experiencing slow performance and Dreamweaver goes into "Not Responding" state for 30-60 sec when I click somewhere (doesn't matter if I click in design or code portion) and also when I go to Undo something. This has happened in other files, too. Eventually it starts responding again but it is moving slowly. My task manager shows CPU and memory usage spiking up and down as well (specifically memory of Dreamweaver process).
Sometimes it does it when Dreamweaver is open and I am doing something in another smaller window in front of it too (such as writing an email)…
I had the task manager open and Dreamweaver (and nothing else) the other day, and Dreamweaver kept flashing back and forth to "Not Responding"… so I closed it and it made task manager freeze up so that it wouldn’t close and the task manager memory and CPU usage were spiking.
Specs on my machine:
HP xw6600 workstation
Windows Vista SP2 (32-bit)
Intel Xeon Processor (Quad-core, 2.33 GHz)
4 gigs of RAM
I am Running Dreamweaver CS5 with all updates installed
I have already tried the following:
Re-creating preferences file
Re-creating registry files
Re-creating personal config files
Uninstalling and Re-installing Dreamweaver
Running a Windows Live Care scan on my computer to check for viruses, registry file errors, etc.
The only thought I have is that I when I installed CS5, i didnt uninstall CS4 first, thinking that I could just upgrade...
When I went into add/remove programs Creative Suite CS4 still showed up in there, but the programs were not on my computer anymore. I removed it anyway, but there were still some random folders left on my computer from it that I found when trying to solve this issue, such as preferences files from CS4 and personal config folders for Dreamweaver CS4, Photoshop CS4, Fireworks CS4 and Contribute CS4, which I deleted, but it has not solved the problem.
I can't think of anything else to try short of wiping my hard drive and doing a clean install of OS and Creative Suite, which I really dont want to go through.
Please help! -
Need to retrieve memory and cpu information
level: Advanced
i m working on a cluster related software (not a business software, just a thesis work). i need to retrieve current memory and cpu usage info (i m using windows xp, i need the info what we get by pressing (alt+ctrl+del)). i need to use pure java. please tell me a better and easy way.i know about JNI and i know Runtime.exec(), but theRight, then you also know what to search for on google.
problem is it would not be helpful for my program to
call taskmgr by Runtime.exec() and for using JNI i
need the native code in c or c++ to retrieve the cpu
and memory usage information. but i m not expert in c
or c++. Thats more search factors to add to the google search.
please help me somehow. if u have any reliable native
code then help me. the code should provide both cpu
and memory usage info instantly.Thats another requirement to add to that google search.
There may be free versions out ther, but you are going to have to do the leg work, nobody is going to do your work for you. You know about runtime.exec(), you know about JNI, now do a search. -
Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes
I think you should review what you wrote. There is no question, hence, my reply. I can't tell by the AM listing what applications are using memory. You need to click on the Real Mem column once or twice to display in descending order.
Aside from what you see in AM, what exactly is your problem or perceived problem. You are very low on Free Mem at the moment the screen shot was taken. Those displays are not depicting your computer's instantaneous memory usage.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Memory Usage Performance Guidelines- About the Virtual Memory System
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs. -
We use win2003,win2008,win2012 servers.
I heard somewhere that Microsoft recommendation threshold of disk usage monitoring is ( free disk space >= 15- 20 %) , if I remember correctly, but how about CPU usage and memory usage monitoring ?
What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble and improve availability ?Hi,
You can refer the following Performance Tuning Guidelines,
Performance Tuning Guidelines for Windows Server 2003
http://download.microsoft.com/download/2/8/0/2800a518-7ac6-4aac-bd85-74d2c52e1ec6/tuning.doc
Performance Tuning Guidelines for Windows Server 2008 R2
http://blogs.technet.com/b/josebda/archive/2010/08/27/performance-tuning-guidelines-for-windows-server-2008-r2.aspx
WINDOWS SERVER 2012 - PERFORMANCE TUNING GUIDELINES
http://blogs.technet.com/b/itprocol/archive/2012/11/27/windows-server-2012-performance-tuning-guidelines.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I'm a new user of SJSAS. Currently I�ve installed v9.1 on redhat. I would be helpful for if any body answers questions below-
1. Is it possible to set different limit for memory & CPU usages for different applications, if yes then how ?
2. How can I monitor memory & CPU usages by different application ?
ThanksBy "application", I'm assuming you mean different web/ejb/enterprise applications within a single SJSAS instance. If that's true, then the answer to your question is no -- all applications share the resources of the appserver.
On the other hand, if you need to, you can set up multiple instances of the appserver on the same machine, deploy one application to each instance, and control the resources that the appserver itself uses. How you limit the CPU use (and monitor) is then done at the OS level -- I don't know how it's done in Linux, actually. But in Solaris, you could use the Solaris Resource Monitor, or processor sets, or Zones/LDOMs, or any number of things to affect the resources available to the appserver; look for similar things in Linux. -
10.1.3 memory/CPU usage problems
I recently migrated from JDev 9.0.5.2 to 10.1.3.0.4 and impressed with the new features and functionality.
However I've noticed the interface seems significantly slower (eg. code insight and simply inserting a new line of code is much slower), and the memory footprint seems to continually grow. Seeing it at >300M is not unusual.
There are also times when JDev seems to simply hang, and when I look a the JDev process in WinXP, the memory usage grows seemingly out of control as well as gobbling CPU cycles. My only option to kill the process. I'm using a 2.6G Pentium, 1G RAM, WinXP Prof and JDK 1.5.0_05.
Are there known problems with JDev's memory/CPU usage, or known options I can turn off to improve performance?
TIAI don't have the memory monitor extension and have turned off all non-essential extensions but still see the memory-growth problem.
One odd thing I noticed is the JDev process on WinXP grows by 2-3MB each time a breakpoint is hit. I verified that same behavior doesn't exist in JDev 9.0.5.2 for the same project, and happens no matter which J2SE I select for the 10.1.3 project (JDK 1.4 or 1.5) or which runtime VM (hotspot or ojvm). -
Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neerajHi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj -
Yosemite and Mail massive memory leak and excessive CPU usage
I've just installed Yosemite and upgraded to 10.10.2 via the AppStore. Now I have a problem with Mail sucking up all the CPU (>106% !) and memory (>8Gb and rising while doing nothing). Everything runs fine when I quit Mail. Very disturbing behaviour!
I've tried several suggestions found elsewhere on the board here, such as turning off and even removing all Mail plug-ins including SpamSieve, but without positive results. I've tried un-selecting 'Store draft msgs on server', as well as the option for junk and sent msgs. but again without any difference. Going Offline within Mail also makes no difference to its memory hogging or CPU usage.
I notice this is an issue that's been around since last year (wish I'd known that before upgrading to Yosemite today) and I am just completely flabbergasted that it still exists. Would've thought Apple'd have fixed it in the first but certainly in the second incremental OSX Yosemite release.
Is there anything else I could try that's proven to be effective in stopping Mail's massive memory leak?Okay, I've run Disk Util and restarted. Seems to have made a little bit of a difference to the RAM gobbling in that it appears to be going at a slower rate, but it's still up at around the 45Gb after an hour. Here's the EtreCheck report in the hope that it helps.
EtreCheck version: 2.1.6 (109)
Report generated 28 January 2015 4:38:22 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Mid 2014) (Technical Specifications)
MacBook Pro - model: MacBookPro11,3
1 2.5 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 16
Video Information: ℹ️
Intel Iris Pro
Color LCD spdisplays_2880x1800Retina
NVIDIA GeForce GT 750M - VRAM: 2048 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:1:19
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 499.05 GB (413.24 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Asmedia ASM107x
Asmedia ASM107x
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Asmedia ASM107x
Asmedia ASM107x
Logitech Logitech USB Optical Mouse
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 2
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DiskWarrior.app
[not loaded] com.alsoft.Preview (5 - SDK 10.5) [Support]
/Applications/ibVPN.app
[not loaded] net.tunnelblick.tap (1.0) [Support]
[not loaded] net.tunnelblick.tun (1.0) [Support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4231 - SDK 10.8) [Support]
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Support]
[loaded] jp.plentycom.driver.SteerMouse (4.2.2 - SDK 10.6) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[running] com.sophos.uiserver.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[running] com.adobe.adobeupdatedaemon.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.sophos.common.servicemanager.plist [Support]
[running] com.synium.cleanappdaemon.plist [Support]
[running] com.syniumsoftware.CleanAppDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.c-command.SpamSieve.LaunchAgent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.linotype.FontFolderProtector.plist [Support]
[failed] com.wondershare.mobilegodaemon.plist [Support]
[not loaded] info.lokiware.attachmenttamer.cleanup.plist [Support]
[invalid?] info.lokiware.attachmenttamer.setupagent.plist [Support]
User Login Items: ℹ️
Letter Opener Updater Application (/Library/Mail/Bundles/Letter Opener.mailbundle/Contents/Resources/Software Update.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Default Folder X Helper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Default Folder X.prefPane/Contents/Resources/Default Folder X Helper.app)
FontExplorer X Pro Application Hidden (/Applications/FontExplorer X Pro.app)
Calendar Application Hidden (/Applications/Calendar.app)
SteerMouse Manager Application (/Applications/Utilities/SteerMouse.app/Contents/MacOS/SteerMouse Manager.app)
Mail Application Hidden (/Applications/Mail.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
DiskWarriorStarter Application (/Applications/DiskWarrior.app/Contents/Helpers/DiskWarriorStarter.app)
finderpop-daemon Application (/Users/[redacted]/Library/PreferencePanes/FinderPop.prefPane/Contents/Resource s/finderpop-daemon.app)
XtraFinder Application Hidden (/Applications/XtraFinder.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
User internet Plug-ins: ℹ️
iGetter Plugin: Version: 2.9.3 [Support]
iGetterScriptablePlugin: Version: 2.9.3 [Support]
Safari Extensions: ℹ️
1Password [Installed]
iGetter Extension [Installed]
3rd Party Preference Panes: ℹ️
Default Folder X [Support]
FinderPop [Support]
FUSE for OS X (OSXFUSE) [Support]
SteerMouse [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
105% Mail
3% WindowServer
2% sysmond
2% Activity Monitor
0% fontd
Top Processes by Memory: ℹ️
4.10 GB Mail
103 MB Finder
86 MB SophosScanD
86 MB InterCheck
86 MB WindowServer
Virtual Memory Information: ℹ️
84 MB Free RAM
2.92 GB Active RAM
2.87 GB Inactive RAM
2.76 GB Wired RAM
2.57 GB Page-ins
23 MB Page-outs
Diagnostics Information: ℹ️
Jan 28, 2015, 03:37:41 PM Self test - passed
Jan 28, 2015, 02:49:01 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Android File Transfer Agent_2015-01-28-144901_[redacted].crash
Jan 28, 2015, 09:31:04 AM /Library/Logs/DiagnosticReports/Mail_2015-01-28-093104_[redacted].cpu_resource. diag [Details]
Jan 28, 2015, 07:39:17 AM /Library/Logs/DiagnosticReports/AdobeCrashDaemon_2015-01-28-073917_[redacted].c rash
Jan 27, 2015, 07:54:29 PM /Library/Logs/DiagnosticReports/AdobeCrashDaemon_2015-01-27-195429_[redacted].c rash
Maybe you are looking for
-
Flash Player doesn't work on Safari, Netscape, nor Mozilla
I've downloaded the flash player but it's funny that it works on Internet Explorer but it doesn't work on the other browsers. I downloaded it from here ---> http://get.adobe.com/flashplayer. Why is that? I don't like to use Internet Explorer and I ra
-
OWB 10.2.0.4 ANSI SQL join problem
Hi Its seams to me, that in OWB 10.2.0.4 there is something broken with ANSI SQL joins and instead of ANSI joins there is used oracle SQL joins only. Maybe someone can point some solutions? I can't rewrite all mappings with union and other operators.
-
Re: Lenovo P780 [forum rank question]
What do u mean by what's dos? Moderator comment: Subject edited. Solved! Go to Solution.
-
I own a legal student version of CS2. I recently purchased a used laptop off a friend. This laptop had a dodgy version of CS4 and Adobe Acrobat 9. I immediately unistalled CS4 knowing that she hadn't paid for these versions, but didn't realize that A
-
My Tunein radio app is on my phone; I can search for it; but its icon has vanished from my screen. I mounted my phone and its not in the 'grey section' of iphone windows. Tried resetting the home screen. Any way to get its icon back on my screen? tha