Real-Time Enabled field and Generic extarctor

Hey,
We are using PI 2004_1_470 on our R/3 system, and I just noticed that there is a field called Real-Time Enabled on the generic delta screen. This maps to ROOSOURCE-REALTIME.
What is the field being used is? Is this some early release of the near real time function that will be part of BW 7.0, or can I use this with BW 3.5?
Thanks Bill!

Hi Mickey,
in general:
1.) you need a 7.0 DataSource (3.X DataSources cannot deliver Real-Time information)
2.) you can only run a DataSource in one mode, either "Real-Time Data Acquistion" or "Standard", i.e. the same DataSource cannot be incorporated in the data flow in different modes.
3.) Business Content DataSources are not delivered with the option "Real-Time Data Acquistion" at the current point in time. We are currently discussing which DataSources should be made available to start off with.
If you have specific scenario in mind, please contact your Ramp-Up Coach in order to direct support by us.
Cheers
SAP NetWeaver2004s Ramp-Up BI Back Office

Similar Messages

Datasource:Real time enabled

Hello everybody,
Hope to have your valuable suggestions on this
1:Is it possible for me to copy a standard FI datasource .I need to have 0FI_AR_4 ,which is currently active and in use ,datasource real time enabled
2:I do not want to go to roosource table and modify the table to make this real time enabled.Is it possible for me to create a new datasource(not generic since i would have to create view/query etc) copying this 0fi_ar_4 and have it real time enabled
3:I tried RSDS transaction.however its not helping me to copy or create
regards
savi

Andreas/Michael,
I would like to add a different dimension to this topic mentioned by you.
Please do correct if wrong.
Problem -
The FI line item delta DataSources can identify new and changed data only to the day because the source tables only contain the CPU date and not the time as time characteristic for the change.
This results in a safety interval of at least one day.
and thats why we cannot enable this datasource as Real Time;however please refer this note below and help me understand how would this fit the aforementioned bill.
Note 485958 - BCT-FI: Extracting FI line items up to the current date
Solution
Due to a customized setting, it is now possible for the FI line item extractors to read the data up to the current date during the delta runs.
During the next delta run, the data is then read again from the day when the previous extraction was called, up to the current day of the call for the new extraction.This means that the delta extraction of the data always occurs with time intervals overlapping by one day.
The delta calculation by the ODS objects ensures that the repeatedly extracted data does not cause duplicate values in the InfoCube.
Hope it Helps
Chetan
@CP...

Caltyp24_Call Type Real Time All Fields Service Level Today discrepancy

Hi All,
During our initial phase of deployment to CUIC reporting tool we want to offer similar features to our team to ensure smoother transition. However, I'm seeing discrepancy in data pulled by two different reporting engines - Webview 7.5 and CUIC 8.x. I have attached the screen shot of both highlighted in red.
Details:
CUIC/WebView Report: caltyp24_Call Type Real Time All Fields;
Version of CUIC: 8.5(4) build 1 (8_5_4_10000_99);
ICM Version: Release 7.5.1.0, Build 23684;
Column with Discrepancy: Service level today.
Any help much appreciated.
Thanks in advance,
Ramchand

Thanks very much for responding so quickly Kartik. The data is pulled from the ServiceLevelToday column in Call_Type_Real_Time table. Here is the query; I have truncated some columns for brevity:
SELECT Call_Type.EnterpriseName,
Call_Type_Real_Time.CallTypeID,
Call_Type_Real_Time.ServiceLevelCallsToday,
Call_Type_Real_Time.ServiceLevelToday,
Call_Type_Real_Time.TalkTimeToday,
Call_Type_Real_Time.ReturnReleaseHalf,
RouterCallsAbandToAgentTo5 = Call_Type_Real_Time.RouterCallsAbandToAgentTo5,
RouterCallsAbandToAgentHalf = Call_Type_Real_Time.RouterCallsAbandToAgentHalf,
CallsAtVRUNow = Call_Type_Real_Time.CallsAtVRUNow,
CallsAtAgentNow = Call_Type_Real_Time.CallsAtAgentNow
FROM Call_Type, Call_Type_Real_Time
where Call_Type.CallTypeID = Call_Type_Real_Time.CallTypeID
Order BY Call_Type.EnterpriseName, Call_Type_Real_Time.DateTime
We used the templates through CDN that mimic the real time and historic reports from Web View. This is the only real time report where we noticed the discrepancy in service level today column. We have the Standard CUIC license so I am unable to verify the report definition through CUIC. However, I should assume that both reports are referring to the same columns and tables. Do we have any alternatives? Please suggest…thanks

Real-Time Sequencer Feedback and Questions

Post your questions and feedback to the Real-Time Sequencer Architecture and Real-Time Sequencer Architecture Example here.
Brian K.

I just purchased the USB 6341 DAQ card. I am using Dev1/.Port1 to control 4 driver transistors. The transistors fire 4 SSR. I am trying to create a sequence for the 4 transistors. Sometimes a test unit that is driven by a SSR will fail. So I have to change the sequence for the failed DUT.
Basically each SSR will be ON for 6 seconds. There will be a delay of about 5.75 seconds for the next valve to fire. The delay is used to balance the pressure testing. The second valve will need to start at 5.75 seconds later. Basically the two valves must cross at the 50 % turn OFF. How can I perform this task. There are at least 7 different test sequences??
Thanks,
Philip

Is vision development module in labview 8.6. sufficient for real-time image acquisition and analysis using a webcam

Hi,
I'm new to labview and trying to develop an eye-tracker using labview 8.6. It has the vision development module and i was wondering if this was sufficient for real-time image acquisition and processing or would i be needing any other software tools.
Solved!
Go to Solution.

Hello, certainly it is possible and sufficient for real-time tracking!
About eye tracking - if you need an example, you can find the code here:
https://decibel.ni.com/content/blogs/kl3m3n/2013/10/08/real-time-face-and-eye-detection-in-labview-u...
The code uses OpenCV functionalities along with the LabView UI (and some other functions like overlay).
Hope this helps a bit.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

I want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording. At the moment i have to go into post-production and manually set the graph equalizer at various time points .

i want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording.
At the moment i have to go into post-production and manually set the graph equalizer at various time points ...

This won't be real-time as you record, but you could tweak the EQ in real-time after the recording thus:
Record what you want to tweak into GB with no effects.
Solo the track and output it into something like Audacity.
Start Audacity recording, then play your track in GB as you make those tweaks. That's what Audacity will record.
Get that file from Audacity and put it into GB, then you'll have that effect.
Sorry if it's complicated, but that's what came to mind. Hope it works.

Any real time complex validations and assignments

Hi frds,
Any one can share few real time complex validations and Assignments on product object?
Thanks in advance
Regards.

Rajeev,
I do not have real time validation exaples. There are couple of blogs on SDN
search for
MDM Expression Engine
(the document name is MDM Express Engine: Validations,Assignments and More)
Parsing and Validating Numbers
(used for check digits but gives more insight on writing validations.)
I hope this helps
Regards
Bala Pochareddy

SIT Real-time data logging and passing data

Hello all,
I am pretty new to LabView real-time, so I just want to confirm a few things. I am also using the Simulation Interface Toolkit.
Let's take the Sinewave.vi from the SIT examples. I have modified it to use sinewave.dll, and run on PXI-8101. If my understanding is correct, when I click "Play", the entire Sinewave.vi is deloyed into PXI-8101, and therefore the entire VI is running at the same pace. The front panel I see on my desktop is slower snapshots of what is actually happening?
1) Let's pretend now that the sinewave model is time critical and must run every 10ms. How do I do that? I have noticed that within the "SIT_Indicator_Indices" loop, there is a Wait 50ms block. Is that accurate?
2) I have also added a time elapsed block that will change the Frequency and Amplitude inputs as a function of time. I made them update every 2ms. What clock are we running on? If my sinewave.mdl suddenly calculate integration (time dependent), can I use that elapsed time block as my timer to pass into the model?
3) How fast is the sinewave.vi running anyways?
4) Let's say I want a log of the sinewave output (a data point every 10ms). I don't need the log in real-time, I just want to do some analysis on it later. How do I do it?
Thanks.
Attachments:
Sine Wave.vi ‏104 KB

Hi Bladhart,
When running the in the Development Environment (pressing the run button on the Real-Time vi) there will be an extra thread to handle the front panel you see. This thread will be handled just like any other thread in Real-Time and will take processor time, thus slowing down your entire application to a certain extent.
1. You would need to make sure everthing inside the loop can execute within 10ms and change the wait time to 10ms. Or you can use a timed loop set to run every 10ms and get rid of the wait time but again you would need to ensure everything in the loop can execute in under 10ms.
2. The elapsed time should be running off the Real-Time system clock.
3. The time that the Sinewave.vi is running is system dependent, there is no set speed.
4. You can log the data by saving to a *.tdms file. You can then use the data from the *.tdms file to do processing later.
<Brian A | Applications Engineering | National Instruments>

Real Time DAEMON Stops and gets inactivated.

Hi,
We have real time DAEMON loading the data from delta queue to the ODS.
It becomes inactive after some time with lots of error messages. Don't understand what they mean . How to get documation to understand what the problem is and how to activate them again ?.
Also, I have another DAEMON, which gets to STOP condition. It doesn't start again even if I try to "Start" it in RSCRT transaction. How to start it again ?. It also gives error messages.
Thanks.

Hi,
Daemon is inactive when no batch job runs for this daemon and no upload via the assigned InfoPackages.
Daemon starts after it has a free batch job and currently no upload with the assigned InfoPackages.
Daemon is stopped when the started data transfers are completed and all related requests are closed.
hope it helps....

Real-time PID control and continuous buffered acquisition. Does it work together?

I use the "real-time PID control.vi" that acquires single AI point and generate single AO point in every "while loop" iteration to control a piezo actuator motion. Simultaneously I need to do (in another loop) a continuous buffered acquisition of another two AI channels (in the same rate as first AI channel).
It does not work together.
Does anybody know how to fix it?
Platform: LabVIEW 6.1
Board: PCI-6024E

Hi,
I would try to avoid the idea of using a separate loop since the PID
loop is a continuous acquisition and will require un-interrupted access
to the Analog DAQ system of the board. The last thing it needs is for
you to attempt to start other AI functions at the same time.
Configure your AI in the PID loop to read in multiple channels (Just add
some more channels to the Input Channels Control. Separate the data as
it comes out of the AI single Scan function using Index Array or other
Array functions into that needed for the PID and that needed for your
other data (the example is already doing this to make sure it only gets
1 channel of data into the PID). If you don't need to sample all your
channels of data all the time you can throw some data away as
required.
Obviously your other channels are now arriving one sample at a time so
if you might need to build an array, insert into an array or use Auto
Index on the loop if you are data logging.
Regards,
Dave R.
varmih wrote:
> I use the "real-time PID control.vi" that acquires single AI point and
> generate single AO point in every "while loop" iteration to control a
> piezo actuator motion. Simultaneously I need to do (in another loop) a
> continuous buffered acquisition of another two AI channels (in the
> same rate as first AI channel).
> It does not work together.
> Does anybody know how to fix it?
>
> Platform: LabVIEW 6.1
> Board: PCI-6024E

VI on LabVIEW real-time is loading and running a DLL which has been deleted from the machine

OK, this is a weird one (at least, to me :-) )
I have a small real-time demo application VI that I am writing, using some new VIs I just created. My new VIs are wrapper functions for a DLL, using Call Library Function Nodes.
In the process of debugging, I decided to delete the DLL and run without it, to confirm that I am actually loading and using the DLL (since it seemed to have stopped doing something it had successfully done just a little while earlier).
The VIs that use that DLL still run, and at least some of them actually do what they are supposed to do. But the DLL does not exist on the real time machine! Not only did I delete it, reboot the machine, and check that it was gone, but through my ftp program I searched the whole hard drive for that DLL and did not find it (the search succeeded in finding a different DLL which did exist on the system, so the search-via-ftp is working).
How could this happen? What am I missing? Could this somehow be the result of a corrupted VI or is there some more logical explanation for the phenomenon?
Thank you.
Batya

Nathan is right at least for the Phrlap ETS based RT systems. For VxWorks you have to (or maybe used to have) to download the shared library to the controller before you could deploy an executable that makes use of them. For Pharlap ETS systems if you deploy a VI library dynamically to a machine it will download everything including shared libraries to the the RT target memory and run it from there. Only if you create an executabel and "install" it to the target and run it from there will it use whatever VIs are in the executable and also use the shared libraries that have been installed onto that system (at least for Pharlap ETS RT targets. As mentioned before for VxWorks targets, the deploy process even for executable installation did for some reasons not take care about moving the according *.out library to the target together with the rtexe).
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Real time fan speed and temperature of the Thunderbolt Display

Is there software program that allows you to know the real time speed of the itnernal fan of the Thunderbolt display. Also I would like to monitor the internal temp of the TBD. I have Istat which allows me to do both but only for my MBPro not my montior.
Thanks.

Have you ever cleaned you machine? Since it's an iSight (which is actually 3rd generation, Ambient Light is the 2nd, Rev A the 1st), you can't open it but you can vacuum the air vents, which might help.

Current Time code field and "Capture Now has reached the end of tape......"

Hi I just got my new iMac and I have lots of space. When I open up the Final Cut Pro and press the capture now it gives me the notice that it had reached the end of tape, but I haven't reached the end. I have vhs in the VCR machine and it is connected through the digital device. Not only that but my current timecode field is always running and I can't stop it. Also I used the uncontrollable device and when the tape has reached the end I tried to escape but it seizes up and I lost my capture. what shall I do?

Yeah, I was just thinking about that. I'm doing this on an iMac.
What's going on with Capture Now? I know staying digital would be best. But I'm kinda doing this project to give myself some hands-on time with FCP to get familiar with it. I'd like to capture this stuff through the Log And Capture GUI if I can. Sooner or later, I'll need to do it with something else (possibly an old VHS tape) where I won't have the option of staying digital.
Anybody?

Real Time Report Placed in iFrame and then Within a Web Applet

Real-Time Reports built and executed BI tool retrieve real-time updates. However, when report URL is placed within an IFRAME and that is then placed in a Web Applet and the Web Applet is placed within a Page Layout Section, the real-time report no longer retrieves real-time updates.
Do you have any ideas as to why?

Hi Don,
Thanks for the reply. I had downloaded a set of samples from SAP and I have looked through a few of the set you supplied. I am worried that I'm going to have some trouble because the samples have the reports loaded as part of the solution but I was looking to create a more generic viewer. I don't want to have to reprogram for each and every report that is created. That is why I was trying to use the generic parameter dialog. After the Report Load Failed dialog comes up, it does bring up the parm dialog and hits SQL Server just fine. Yes...the reports are passing Parms to Stored Procs in SQL Server. The report has default parameter values.
What I am trying to do is search thru the application folder and gather the names of the reports located there and fill the combo box with the names of the reports. Then the user should just be able to select a report and run it. I can't save the data in the reports because they must be ran per the requester's date range and other desired parameters.
Does this seem valid or am I going to have to program for EVERY single report and reprogram/recompile for every report added? Not particularly what I want to hear. I would have used the standard Crystal Report Viewer and had the users use that but it doesn't seem to allow you refresh the data from the viewer.
Thanks for your help,
Chris

HT1553 What is the best system for a real time cloud back up of documents? My MacBook crashed, and I lost 2 hours of writing and could not find a way to restore it.

My MacBook Pro crashed while I was rewriting a book, lost more than an hour of work and could not find a way to restore it. Did not have Time Machine set up, but it appears that Time Machine does not have Real Time back up and documents must be manually stored.
I need an automatic, real time back up to keep this from happening - I'm not happy my MacBook has crashed twice now. What is the best cloud system for Real Time backup? Thanks to anyone who can help me, I'm not the most astutde computer guy... James

One way would be to use Dropbox, or a similar sync service, and just keep your critical documents in the appropriate folder. Dropbox, at least, keeps a local copy of everything and syncs automatically to the cloud whenver a change is made. Dropbox is free for up to 2GB of data.
There are also true backup services such as CrashPlan+:
http://www.crashplan.com/consumer/crashplan-plus.html
which provide automatic backups whenver a change is detected. It's not free, but usually such services aren't too expensive unless you need to back up a lot of data.
Regards.

Real-Time Enabled field and Generic extarctor

Similar Messages

Maybe you are looking for