Really easy, but confusing question about SW installation.....

Hello:
I have a pc desktop (Win XP Home SP 2) and a new HP wireless laptop I want to connect with my new WRT54GS.
Question.....When I open the box, it says "STOP - LOAD THE CD FIRST".
Ok, fine. Load the cd where????? Desktop (wired to router), laptop, or both?????
Thanks for answering a silly question.
William Hollingsworth

Is your PC going to be wired or wireless? Anyway, set-up CD usually does not work properly. Connect a PC directly to the modem and go to www.linksys.com/easy and run the EasyLink Connect Tool.

Similar Messages

Some basic question about SCM Installation

Hi Folks,
Could you please advice me about some basic questions about SCM and its installation -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
I know these are some basic questions, but these will help me give me a direction.
With best wishes,
Krishna

Hello Krishna -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
---> There are various Modules in SCM Like APO (Sub Modules DP (stand alone), SNP Needs Master data from R/3 and has to pass on transactional Data to R/3, PPDS same as SNP, GATP same as SNP), ICH needs Data from R/3 to work with. Core Interface (CIF) connects R/3 to APO for transferring data.
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
-->For thorough understanding explore the following links
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
-->Refer Above
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
--> APO comes with a small BI inbuilt functionality. you can only perform certain functions using that BI.
Hope this helps.
Regards,
Suresh Garg

Basic Questions about Package Installation

I have one basic question about installing packages.
How can I find out if needed software is already installed without knowing the name of the package?
For e.g. I want to know, if the MYSQL Server is already installed but I don't know the Package name.
How can I find out the package name of needed software?

Difficult.
Assuming the string "MYSQL" appears somewhere in the package
name or the package description, you can grep the output from
"pkginfo". That is "pkginfo | grep -i sql" would list all installed
packages that contain the substring "sql" with either upper- or
lowercase letters.

Basic questions about JRE installation

I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
Firstly I have some basic question about the general installatio/deinstallation.
1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
Regarding the JRE 1.5,
I am wondering:
1 where is the registry entry written in windows?
2 how to make the JRE installation process silent?
Thanks !

Just click on this link http://mindprod.com/jgloss/registry.html.

[Theory] A simple but hard question about OO programming

I was in my first class of OO programming (4th year of computer engineering in Valencia) and the professor gave us homework.
The homework was a simple question about OO programming (it is not about a specific language, though we are going to use Java in the practice sessions), we shall find an answer to it and discuss it in class the next day.
The question was:
"May classes also be objects?"
which can be said as:
"May classes be instances of an(other) classes?"
I hope that you, archers, can enlighten me in this question

tvale wrote:I believe an object is an instance of a class.
Yup, that's true. Let's see... An object is an instance of a class, so we can have a lot of objects coming from one class.
We can say an object is not a class because it has a state (think about a light, it has a state: on or off, but a class light is not on/off, because in a class we just describe the behavior that class should have.
But what we're asking here is if a class can have a state. I think it may refer to static properties about the objects.

A question about Tiger installation via firewire

A friend of mine took her A1055 14.1" 1.33Ghz iBook G4 to someone to have a bad hard drive replaced. Before he returned it, without asking her, he removed Tiger and installed Leopard on it. Her base memory is only 256MB, storage 60GB so, as might be expected, once she reinstalled all the necessary apps she has to use in her line of work, her iBook became sludge. It constantly freezes up; something it never did before he installed Leopard. She can't afford, at this time, to move up to a MacBook, so she's asked me if I can help her get back to TIger. (The guy who installed Leopard isn't interested in correcting things.)
This question, before I begin: I don't have retail TIger disks (and she doesn't, either), but I do have the bundled disks that came with my old pet, an A1054 12" G4. Both iBooks do have DVD drives, but, of course, these are bundled disks. Should I be able to successfully skirt the "bundled" issue and install Tiger on her machine via firewire? I plan to save her important files to a flash before I begin but, since she's running Leopard (if you can call what it's doing "running"...) I'll have to erase her hard drive. I'm hesitant to do this, if someone here knows any reason my 12" bundled software won't work with her 14.1" iBook, even though it was running Tiger before. Since I primarily use a MacBook, I'm a bit reckless when it comes to erasing my own iBook's hard drive, but I'm reluctant to do so to hers, if all I might potentially end up with is an empty iBook.
I've never been afraid to ask a stupid question; see how brave I am.

Getting around to answering the question about my own iBook: the one I keep next to me is model is A1133. Entering its serial number into this site confirms that TIger was its original OS, so those particular bundled disks are to be expected. But my old A1054's serial number reveals, as you pointed out, that it's OS was 10.3.3. This begs the question: why, when I purchased it as a re-furb at my local Apple Store, several years ago, did it come all neatly boxed, not only with user manuals and stickers, but bundled Tiger disks? I suppose "Apple re-furb" is the short answer, but the "bundled" part is a bit fuzzy.
Well, back to the original question, Ronda, regarding my friend's iBook and the fact that the guy who worked on it installed Leopard, without her consent: Yesterday, I was mulling it over, and, remembering that her RAM was only 256, decided that, before I did anything else, I'd up her RAM to see if this helped Leopard run any better. I pulled a 1 GB card from my "parts" iBook and popped it in. I'm running it through its paces, today, to watch its behavior.
If it continues to object to having Leopard as its OS, then would the bundled disks that came with my A1133 allow me to install Tiger onto her HD, via firewire, since its production year was more recent? (I apologize that, at the time I originally posted, I'd not remembered that the A1133 also came with disks. If you could see all the Macs stacked around this place, perhaps you could forgive that oversight.)

Really, really easy but need help

This question is very easy but I just began java and I need help. I need to write a simple program to display an invoice with item name, number, quantity, and price. I am going to use two classes but I can't figure out how to create instances to make the items display. Can anyone help?

here you go, hope the following code helps
public class InvoiceTest
     public static void main(String[] args)
          Invoice in = new Invoice("375ml fanta", 1234, 10, 1.5);
          System.out.println(in.toString());
public class Invoice
     private String itemName;
     private int itemNumber;
     private int quantity;
     private double price;
     private double totalPrice;
     public Invoice(String name, int num, int qua, double price)
          itemName = name;
          itemNumber = num;
          quantity = qua;
          this.price = price;
     public String getItemName()
          return itemName;
     public int getItemNumber()
          return itemNumber;
     public int getQuantity()
          return quantity;
     public double getPrice()
          return price;
     public double getTotalPrice()
          totalPrice = (double)(price * quantity);
          return totalPrice;
     public String toString()
          return "invoice detail: \n"
                 + "item name: " + getItemName() + "\n"
                 + "item number: " + getItemNumber() + "\n"
                 + "quantity: " + getQuantity() + "\n"
                 + "price:" + getPrice() + "\n"
                 + "total price: " + getTotalPrice();
}

A question about the Installation process in general

Hey guys, a general question to the installation process.
The following scenario:
I install a programme on my macbook pro and don't tick all possible installation options (like additional content).
Afterwards I change my mind and want to install the optional content.
So I run the installation programme again and now the question:
If I install the additional content AND the mainprogramme again is the main programme going to be overwritten or am I going to have the mainprogramme twice on my system from now on
Thanks in advance for you help, folks!

If you do a Unicode conversion (no matter in a UC & CU scenario or as a single project) the target system must be empty - means, you will create a new database and load it with the content you exported.
You can't install the export into your already existing database with the same name.
Markus

Question about initial installation: WRT54GS

Greetings!
I am trying to install a WRT54GS... I have a Motorola SBV4200 Cable Modem (using RoadRunner) hooked into my desk-top PC...
Here's what I'm finding:
I plug everything in, and hit the "Secure Easy Setup" button on the Linksys, and then my laptop finds the signal, and everything's great - I get a super strong signal, and everything's hunky-dory.
A minute or two later, however, the laptop loses that signal, and switches over to a REALLY weak signal from outside somewhere. The Linksys signal isn't even seen by the laptop. (i.e. - it's not on the "Available Wireless Network Connections" list)
So I started reading these boards, thinking that maybe I could find out what was going on... I thought that maybe RoadRunner has a dynamic IP Address, and that when it changed, the LinkSys and the laptop just weren't speaking anymore... So I followed everyone's reccommendations to go check the default IP for the two...
Here's where the next problem occurs... I tried to go to 192.168.1.1, and of course I got to the Username/Password sign in... I left the Username empty, and used "admin" for the password...
Nothing...
Tried EVERYTHING - Admin, ADMIN, admin, Administrator, default, DEFAULT, tried putting stuff in for the username, EVERYTHING (or at least everyhting i could think of...
I tried resetting the LinkSys, and re-tried all those things again... Nuthin'
Does anyone out there have any ideas where to go next? Like i said - it's frustrating because the thing works... for about a minute.
The nice thing is that the guy across the street is an IT guy for a HUGE company (one of the biggest in the state) - and he was stumped too! So I know it's not just me...
HELP!?!
Thanks all -
Tom

Make sure you're hard-wired to the router when you try to access it's address.
Check also if all LEDs are lit up properly. Power LED should always be solid.
Check if the router's still giving you an IP address.

A question about Maveric installer created on a USB key? Can this be used multiple times?

I have downloaded Maveric on a Mac Book Pro.
Then without installing utilising Diskmaker X as suggested using a USB key have created Maveric installer.
My question is that I wish to know if the above created USB installer could be used in more than once to install Maveric?
If I put that above created USB on a Mac Book Air and do the install, and could I use the same USB installer on a second Mac Book Air to install Maveric OS?
This will help not needing to use broadband downloads where restrictions apply?
Regards

Thank you Lanny.
That is great to know about Mavericks.
Regards

Question about driver installation

This is my first build and I thought everything went well. About every 5 of 6 time I shutdown or restart the pc it posts then when I would get the Windows loading screen I get nothing, blank black screen. Its random so I am not sure if it is windows or a component. Any adivise would be a great help. The only this that worries me is I think I loaded my video drivers before the Mobo drivers. By the way I do have a lot of problems playing games, alot of screen freezing. If it is the drivers, how do I fix this? Also could it be the power supply?
My system
AMD 3800+ cpu
Msi Neo 2 Platinum mobo
Corsair xms xl 2x512 inserted into slot 1 and 2
EVGA gforce 6800 ultra video card
Plextor Sata DVD rom
Maxtor 160GB Sata HD
Sound blaster Audigy 2 gamer
Case is Aspire X-Superalien
Power supply is the one in the case
+3.3v - 28A +5v - 30A +12v - 34A -5V - 0.3A

When you have screen freezing symptoms many times it is memory related. I realize you set the timings to the manufacturers spec, but you may want to try setting all to auto and then see if it is the same. The timings programmed into the memory should work fine at stock speed. You might want to check the vdimm setting and see if that is to the manufacturers spec. Some ram requires more than the default 2.5v going up to 2.7v is very safe anyway. Since you are not overclocking and you have top quality components you really should not be having any "freeze" problems. You might also want to resort to the drivers that came on the install disks and worry about upgrades when things are stable. You can easily uninstall drivers through add/remove software in the control panel or through system/hardware in the control panel. You might also want to check that you have your AGP setting in bios at 67 to lock the PCI bus.
Last thought, you made no mention of your cpu temps? What are you seeing there when the cpu is under load? I had a problem like this on a build once and found the HSF was not seated properly even though it looked fine. If your cpu temperature is high it could cause these problems.

First-time mac user needs (probably easy) answer to question about camera

so i got my first mac yesterday, an i-mac with the built in camera. could someone please tell me how to take pics like i took of myself when i first did the set-up? sorry if i'm a bone head and the answer is something really simple. thanks in advance!

Welcome to Apple Discussions, grumpysmurf011
If all you want to do is make aquick snapshot, you can use your Photo Booth application and its "Normal" effect.
Many other applications can make also snapshots, but Photo Booth is about as simple a way as there is.
If you are specifically asking how to change your account (set-up) picture,
you can also do that from within  > System Preferences... > Accounts.
Please post back and explain in different words if I have missed what you want to do.
We will try to offer suggestions based on the details in your response.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

A few questions about the installation

Hi,
Our block of flats has just been upgraded to Infinity - I think it's likely to be FTTP as we have a fibre optic 'pullback' cable running around each floor outside the flats.
We have not yet been able to order the service but I have a few questions anyway. Apologies for the lengthy nature but my partner and I are trying to explore all options with regards to installation.
As it's likely FTTP do we need to have the modem in the same place as the existing master socket. Reading this it seems that we could have the modem located in a different place and have some Cat5e/Cat6 cables run prior to installation to link the modem to the router (which would remain near the master socket). Is that something that's feasible?
If we have to route the fibre cable through to the lounge, what lengths will the engineer go to in order to aid a discrete run? Can they do things like routing through drywall voids where accessible without structural work beyond drilling a hole? Ideally we would need to drill some holes anyway, are they happy doing more than just the one to bring the cable into the flat?
If the engineer is not able to be overtly flexible, can additional cabling be left in a loop with a view to us conducting future work, things like burying the cable into the drywall? Can the cable even be moved once it's connected to the modem? Does moving the modem cost?
Hopefully someone will be able to advise. It's been a long battle to get the infrastructure put into place and I'm looking forward to getting access to Infinity as soon as possible
Thank you for any replies

My understanding is that you don't even need a phone line for fibre therefore you don't need a master socket. That being the case, if you do have a phone line then master socket does not need to be anywhere near the fibre modem. You will find that usually you will have to have a phone line installed as part of the package.
EDIT: You should run Ethernet cable from where the modem will be placed to where you want the homehub/router sited.

Question about OAS Installation!

Hi,everybody:
I encounted a problem when I intended to install OAS4.0 to Solaris Server2.7. The problem is when I tried to execute that "runInstaller",failed.And the error message is :"The JAVA RunTime Enviroment was not found at bin/jre." And ask me to install JRE Version 1.1.7 or higher. But it is true that I've already installed such JRE and there is such bin/jre file in my directory.And I also include the path into .profiles.I don't know why?
If U know,pls help me.I've been working on it over a week!
Linas

then will probably change master socket to new SSPF MK3 but will need to make changes at your extenal master. getting data extension fitted to have connection socket other than at master socket will depend on whether you get openreach or a contractor. openreach should be ok but contractor is usually install master, check working and off there is no way to tell until engineer turns up - hopefully for what you want it is openreach
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Question about Compiler Installation

Hi everyone. Haven't been in this forum for a while.
Anyho, I was wondering. I'm about to run a compiler program called "JCreator LE", and I came upon this message:
"In order for you to make use of the java documentation, you need to have a recent version of JDK JavaDocs installed on your system."
Select the JavaDocs home directory: eg. C:\jdk1.4\docs
I tried looking into my jdk1.4.1_04 folder, but I couldn't locate the source.
So what is JavaDocs, and what is the most appropriate site(s) to download this source?
thanks, Greg

The JavaDocs are basically the Java API Documentation. You can download any version at http://java.sun.com/docs/ or you can view the complete API docs online at http://java.sun.com/j2se/1.4.2/docs/api/index.html

Really easy, but confusing question about SW installation.....

Similar Messages

Maybe you are looking for