Reasons to use AQ instead of 10g messaging service

Are there any advantages to using AQ instead of the JMS messaging service bundled with 10g? Seems to me like we'd want to use the messaging that is part of 10g AS (given that our processing application is running in 10g).
thanks.

If you use Oracle Application Server 10.1.3, this can be done using the new shared-libary functionality as a full supported operation.
http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-swapxmlparser/doc/readme.html
cheers
-steve-

Similar Messages

[svn:bz-trunk] 9838: Bug: BLZ-416 - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging .

Revision: 9838
Author:   [email protected]
Date:     2009-08-31 11:27:50 -0700 (Mon, 31 Aug 2009)
Log Message:
Bug: BLZ-416 - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging.
QA: Yes
Doc: Yes - note the new enforce-endpoint-validation setting.
Details: Added the following config setting:
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-416
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java
    blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java
    blazeds/trunk/modules/core/src/flex/messaging/config/SystemSettings.java

Can use EL instead of fmt:message ??

I am using a custom tag ( to generate tabs for UI)
but it doesn't support internationalization.
I substituted the fmt:message tag in "title" attribute of the custom tag for giving it the localized title
but it seems that the fmt tag can not be executed inside another jsp tag,
so i am wondering if there is any way to access localized message through EL so that i can substitute in title attribute of the custom tag

There are two possible approaches to the issue of your custom tag not supporting EL
1 - Make it support EL. If you have have a JSP2.0 container (Tomcat 5 and above) then all tags will work with EL. Otherwise you have to leverage the EL classes from JSTL.
2 - Follow the struts paradigm and pass the name of an attribute to retrieve from scope which will have the relative text in it.
ie
<fmt:message var="i18nMessage" key="someKeyInI18nBundle" />
<my:customTag titleName="i18nMessage" ...>and then in the custom tag
String title = pageContext.findAttribute(titleName);Hope this helps,
evnafets

Skype as Outlook text messaging service provider

What are the settings (Service provier URL etc) to use Skype as a text message service providerin Outlook?

This is a great question, I was going to task the exact same thing, is there an answer out there?

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text in form of attachment instead of the message opened in the body of the email. How can I solve this?

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text fowarded in form of attachment instead of the message opened in the body of the email. How can I solve this? Thanks. Best regards.

this:
Did not exist at the point of delivery to the consumer.
Nor did the white corrosive agent present exist at the point of sale.
" exposure of copper alloys to moisture or salt spray will cause the formation of blue or green salts called verdigris. The presence of verdigris indicates active corrosion."
I see also 2 contact points with DEEP corrosion pitting not indicative of any defect from the factory.

How to use JOptionPane in jsp, instead of javascript message alert box?

HI,
How to use JOptionPane in jsp,
instead of javascript "message alert box"?
I hate javascript,
I'd like to only use java in jsp. don't use javascript.
javascript is client side,
jsp is server side. i know that.
how to... instead of javascript box?
how to use ... message box in webpage?
don't use applet,,,, don't use javascript,,,
hm...zzzZzz
I hate javascript..T.T
<SCRIPT language=JavaScript>
alert("hate javascript");
</SCRIPT>
===>>>>
In this way,,
JOptionPane.showOptionDialog(null,"I love java")
I'd like to only use jsp and java and html...in webpage.
don't use javascript....
Why? don't sun provide message box in jsp, instead of javascrip box?
Why?
Edited by: seong-ki on Nov 4, 2007 8:38 PM

Drugs are bad, m'kay?

Why should I use Publish instead of Routing for SOAP messages over JMS?

Hi,
I currently read the book "The Definitive Guide to SOA - Oracle Service Bus" and found the following sentence in the chapter "Wrapping an Asynchronous Web Service with a Proxy Service" on page 131, which confuses me:
When you send a SOAP message over a JMS queue, you need to use the Publish action, not the Routing action. <<Are there general restrictions, when to use Publish and when to use the Routing action in asynchronous communication? Is this special for SOAP messages over JMS?
Thanks for your advices,
Katja

Here are a few reasons why. Enjoy!!
A
What Can Amazon Web Services Be Used For?
Although Amazon Web Services is a cool technology, it also provides the very useful function of enabling business partners to interact with Web site through standard protocols. This interaction can lead to a deeper, more valuable relationship for parties involved. Here are a few of the ways that partners are benefiting from Web Services:
Associates: Associates program enables Web sites to link to Amazon.com and earn referral fees for sales that they drive through their links. Many Associates are now using Web Services to build more effective links to our store, thus enhancing their sites and earning more money.
Sellers and Vendors: Amazon.com has thousands of third-party sellers who offer their products on our Web site. Using Web Services, these sellers can more easily manage large quantities of inventory on our platform, and download the latest product information to make sure that their products are competitively priced.
Developers: Among the thousands of developers who have signed up to our Web Services program, many are now creating solutions to help other people work with Amazon. These solutions are powered using our Web Services APIs.
www.amazon.com/gp/aws/landing.html

DTP plugin can't connect to 10g DB that uses SERVICE_NAME instead of SID

Hi,
I am trying to set up a connection to a database that uses a service name instead of a SID (see below for the TNSNAMES entry. It gets an ORA-12505 error because the listener does not know of SID given in connect descriptor. The Connection descriptor used by the client was:
tdc-sun-77-vip.unix.tdc.xxxyyy.com:1521:SRV_TMS_TNV.
My understanding is that the url for JDBC for service name should use a "/" instead of a ":" to separate the port from the service name. The dialog for creating the connection in SQL Developer has radio buttons to choose between SID and Service Name, so it can generate the url appropriately. The wizard for the Eclipse plugin does not have this option and the plugin always uses a ":" as the separator.
If anyone else has encountered this and gotten around it I would appreciate knowing how.
I am using the Oracle Database Tools 1.2.0.200907171332 for Eclipse Galileo.
Thanks... Bob
AMR01TNV_TMS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-77-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-78-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = SRV_TMS_TNV)
(FAILOVER_MODE=
(TYPE=select)
(METHOD=basic)
)))

Still broken after two years. Oracle Database Tools version 1.7.2.20110330204, part of OEPE 11.1.1.7.2. Using Oracle Thin Driver ojdbc14 for 10.2.0.2.
(1) Change to Database Development perspective.
(2) In Data Source Explorer, right click Database Connections. Choose Connection Profile Oracle Database Connection.
(3) Name: OEPE Is Broken
(4) Description: Service Names Are Not Supported.
(5) Click on the icon to the right of Drivers: Oracle Thin Driver. This allows one to edit the driver definition.
(6) Change ConnectionURL to 'jdbc:oracle:thin:@server:1521/servicename. This will prove that the plug-in is not using the driver definition as a template.
(7) Use SQL Developer to probe your database. Ensure that the database is one that requires a service name and cannot connect using a SID.
(8) In the "New Connection Profile" dialog....
SID: (try a service name for a database that requires it)
Fill in Host, Port number, User name, and Password.
Note that the ConnectionURL contains a colon instead of a slash in front of the service name. The plug-in seems to be using the colon.
(9) Test Connection
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
ac4-xxxxx-007-v.ysm.ac4.yahoo.com:1521:acxxxxx.ysm.ac4.yahoo.com
(10) Maybe Test Connection does not work and the plug-in is functional. Click on Finish. No, not the case.
(11) Maybe SID should be

ISE 1.2, Patch 7: "NAK requesting to use PEAP instead"

We're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the Windows supplicant to use EAP only?
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or a supplicant problem, but I'm leaning towards supplicant.
Personas:
Administration
Role:
PRIMARY(A)
System Time:
Apr 24 2014 08:26:58 AM America/New_York
FIPS Mode:
Disabled
Version:
1.2.0.899
Patch Information:
7,1,3
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
11507
Extracted EAP-Response/Identity
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
12300
Prepared EAP-Request proposing PEAP with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12302
Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
12318
Successfully negotiated PEAP version 0
12800
Extracted first TLS record; TLS handshake started
12805
Extracted TLS ClientHello message
12806
Prepared TLS ServerHello message
12807
Prepared TLS Certificate message
12810
Prepared TLS ServerDone message
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12318
Successfully negotiated PEAP version 0
12812
Extracted TLS ClientKeyExchange message
12804
Extracted TLS Finished message
12801
Prepared TLS ChangeCipherSpec message
12802
Prepared TLS Finished message
12816
TLS handshake succeeded
12310
PEAP full handshake finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12313
PEAP inner method started
11521
Prepared EAP-Request/Identity for inner EAP method
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11522
Extracted EAP-Response/Identity for inner EAP method
11806
Prepared EAP-Request for inner method proposing EAP-MSCHAP with challenge
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11808
Extracted EAP-Response containing EAP-MSCHAP challenge-response for inner method and accepting EAP-MSCHAP as negotiated
15041
Evaluating Identity Policy
15006
Matched Default Rule
15013
Selected Identity Source - *****
24431
Authenticating machine against Active Directory
24470
Machine authentication against Active Directory is successful
22037
Authentication Passed
11824
EAP-MSCHAP authentication attempt passed
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11810
Extracted EAP-Response for inner method containing MSCHAP challenge-response
11814
Inner EAP-MSCHAP authentication succeeded
11519
Prepared EAP-Success for inner EAP method
12314
PEAP inner method finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
15036
Evaluating Authorization Policy
24433
Looking up machine in Active Directory - host/*****
24435
Machine Groups retrieval from Active Directory succeeded
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15004
Matched rule - Default
15016
Selected Authorization Profile - DenyAccess
15039
Rejected per authorization profile
12306
PEAP authentication succeeded
11503
Prepared EAP-Success
11003
Returned RADIUS Access-Reject

salodh,
Thank you for your response. Below is the authorization policy it should hit. The trouble is the workstation wants to use PEAP for some reason but we don't want PEAP because we're certificate-based. I understand what you're saying, and it's because I didn't word my question correctly.
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
If the NAK would not request PEAP, it would continue on to the following Authorization Policy (and succeed):
Name
Wired-******-PC
Conditions
Radius:Service-Type EQUALS Framed
AND
Radius:NAS-Port-Type EQUALS Ethernet
AND
*******:ExternalGroups EQUALS **********/Users/Domain Computers
AND
Network Access:EapAuthentication EQUALS EAP-TLS
Again, this PEAP request only happens occasionally. This same workstation will work at other days/times. If I could figure out why some workstations randomly request PEAP (or find a way to force EAP only) I think that would take care of it.
Thanks again, sir.
Andrew

Problem in Update using STREAMS in Ora 10g EE

Hi
I am using Oracle 10g Enterprise Edition for replicating datas after failover occurs in DB
I had followed the steps in below URL..
http://blogs.ittoolbox.com/oracle/guide/archives/oracle-streams-configuration-change-data-capture-13501
The replication is achived using streams.
INSERT,DELETE operations working fine without any issue. But UPDATE operation is not replicated immediately.
I did UPDATE and gave COMMIT, no replication. Again I did UPDATE and gave COMMIT, now only it updates the Streams table.
For every UPDATES it needs two times? Why? How to solve this?
Or Any other URL which gives working examples of Streams in 10g..
Any help regard this highly appreciated..

Thanks for ur reply..
There is no specific reason to use STREAMS..
I have to replicate the data during my properity database stated up.
We already discuss with this topic
Data Replication in after downtime
Instead of using Triggers or procedure, i have to use anyone of the technologies in Oracle 10g for DataReplication..
Can you give me more info like advantages of using DataGuard or other techologies in Oracle 10g EE .

Update report row wise using row buttons and success message

Hi Jari,
Thanks for your reply but i wan't success message in success message region of page and not as popup or alert message.
for report it is classic report but two columns are text field.
Thanks
Manish
Hi,
On Demand process you can use HTP.P to output success message after you code.
Create also exception handler that output error using same HTP.P.
When you call Ajax in JavaScript
var ajaxResult=ajaxRequest.get();
Result you output are in variable ajaxResult.
You can use e.g. alert
alert(ajaxResult);
Refresh report depend lot of what report you have.
There is lot of posts relating interactive report and classic in this forum.
It might be good to create sample what you already have done to apex.oracle.com.
Also creating new post might be good idea as this is answered.
Regards,
Jari

866038 wrote:
Errors come from trying things that don't work.
For example, instead of =, using IN VALUEOF(NQ_SESSION.GROUP) or @{session.GROUP} or lots of other things.
The question is this:
how can I filter a column in Answers using the GROUP session variable which had been initialized in a row-wise initialization block?
I can find no way to do it. Mostly it returns no rows.Hi,
we had a similar requirement, where we have an external name that has project number values. We used row wise initialization to capture all the projects that a user belongs to. Then, we applied the filters at the RPD level, instead of doing it at the report level. From you requirement I see that you are trying to filter the groups based on user login. When a user logs in, he will see the information about the groups that he only belongs to. Correct me if I am wrong here.
Assuming I am right about your requirement, providing the filter that you need apply in RPD.
On all the fact tables are joined to the Package Virtual Group dimension, apply the below filter.
case when 1=1 then (Dim)"."Package Virtual Group" END = VALUEOF(NQ_SESSION."GROUP");
The reason for use of case statement here is, it converts the logical sql to IN Clause, helping us acheive the exact query that we would want.
Please Award points if this helps.
Thanks,
-Amith.

How to use rules to delete old messages from a certain mailbox?

This has bugged me for years. I keep waiting for it to be fixed in the next update of Apple Mail, but it never is!
Is there a way to apply a rule to a certain mailbox? For instance, I have a mailbox (folder) that all of my newsletters get automatically thrown into, and I'd like the older ones to be deleted as the new ones come in. The problem is, there is no way (that I know of) that allows me to apply a rule to this mailbox.
Years ago I had no trouble achieving this function with OutlookExpress. IF MESSAGE IN MAILBOX XXX IS OLDER THAN XXX THEN DELETE. Why is Apple Mail missing this feature? Frustrating. Possibly this has been fixed in Leopard/Mail but I wouldn't know, I'm stuck with Tiger for a while because my g4 won't play nice with Leopard... I'm using Mail 2.1.3

Mail's rules only apply to incoming messages. You can create such a rule but it will not run automatically. You would need to select the all the messages in that mailbox then select Apply Rules from the Messages menu. Alternatively you can create a Smart Mailbox that's configured to contain messages older than a set criterion. Periodically delete the contents of the Smart Mailbox.
You could purchase Microsoft Office in order to use Entourage instead of Mail, Address Book, and iCal. Entourage has additional rules programming.
"Why is Mail missing this feature?" Perhaps because it isn't very much needed. Perhaps to give you a reason to ask the question. Or maybe just to aggravate those who feel they cannot live without it. Best you email Steve Jobs for an answer. It has not changed in Leopard.
You can always submit a feature request at Feedback.
Or, you can return to OS 9 or Windows where you can use Outlook Express.

Exception access violation using jlong instead of jint

Hi,
I hope you can help me.
I'm using Java5 under Windows XP and I'm developing under Eclipse.
I try to use an "old" c-Application accesed via JNI.
Status Quo is that, I have access to the c-side, over my JNI-conform DLL. My current task is to translate the c-side structs to java-objects. This also works, but only with limitation.
Calling methods bidirectional is working, manipulation a java-object is like a walk on an warm and sunny Saturday afternoon.
But I'm not able to use all possible parameters (for now I have tried to use jobject, jstring, jint, jboolean, jlong).
The first problem I had, were using Strings as parameters, but this now I deal with the loopway over java/lang/object (using java/lang/String results in an access_violation).
The next problem, and the harder one, is, that I cannot use the type long or jlong.
int (jint) is no problem, with int all works fine, but if I change the environment, creating and using long, I allways get an the access_violation shown below.
Is there anything, I need to know?
working c-side-code:
jobject someObject;
jint anIntegerValue;
anIntegerValue =5;
jmethodID mid3 = (*env)->GetMethodID(env, cl, "initReturnSomeObject", "(ILjava/lang/Object;)Ljava/lang/Object;");
               if(mid3 == (jmethodID)0) printf("\ndooofes MethodName4!\n");
                         else {
                              const char* myParams;
                              myParams = "ooooohwow!!!";
                              someObject = (*env)->CallObjectMethod(env, jobj, mid3,
                                         anIntegerValue, (*env)->NewStringUTF(env, myParams));
                         }wokring java-side-code
public Object initReturnSomeObject(int i, Object obj) {
          String s = (String)obj;
          System.out.println("String: "+s+"\nInteger: "+i);
          some = new SomeObject(s,i);
          if(some==null) System.out.println("Some is not yet initialized, FEAR!!!!\n");
          else System.out.println("Yoh, I'm soooo many good!! \nSome:\nString: "+some.getS1()+"\nInt: "+some.getI1()+"\n");
          return (Object)some;
so, und this code, doesn't work. you can see, the changes are dramatically!! ;)
sorry for my sarcasm. I do not know, why it doesn't work.
jlong aLongValue;
aLongValue = 2;
jmethodID mid3 = (*env)->GetMethodID(env, cl, "initReturnSomeObject", "(JLjava/lang/Object;)Ljava/lang/Object;");
               if(mid3 == (jmethodID)0) printf("\ndooofes MethodName4!\n");
                         else {
                              const char* myParams;
                                 myParams = "ooooohwow!!!";
                              someObject = (*env)->CallObjectMethod(env, jobj, mid3,
                                        aLongValue, (*env)->NewStringUTF(env, myParams));
     public Object initReturnSomeObject(long i, Object obj) {
          String s = (String)obj;
          System.out.println("String: "+s+"\nInteger: "+i+"\nLong: ");
          some = new SomeObject(s,(int)i);
          if(some==null) System.out.println("Some is not yet initialized, FEAR!!!!\n");
          else System.out.println("Yoh, I'm soooo many good!! \nSome:\nString: "+some.getS1()+"\nInt: "+some.getI1()+"\n");
          return (Object)some;
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d942975, pid=1784, tid=1648
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# V [jvm.dll+0x182975]
# An error report file with more information is saved as hs_err_pid1784.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
#do you need some other informations or details? something out of the log-file? ok, i have to take the bus, so sorry for uncomplete informations or sentences ;)
till later.

Hi,
I'm quite sure, the signature is correct. For failure check, yesterday I ran javap to check the signature, but I do also mean, that I changed the signature afterwards for several time. And, it works ;) at least the way, using Integer.
Trying to use java/lang/String everytime I got the Error, that the method could not be found - this is the part, I was wrong in my description. So the error-Message is a different one.
Belonging to the question for assumptions I made... it's difficult. I'm quite new to JNI, so, I don't know, what I can assume to do. The Method call seems to be a kind of reflection-mechanism. So I assume that the behaviour is similar. But reflection I'm not very firm, either ^^.
What I do assume is, that the parameter-value J fits to the java-type jlong. But a work around on this, I will try today. getting the jlong into an char* or using long instead of jlong or using Ljava/lang/Long; or a casted Long as Ljava/lang/Object; ...
I'm anxious to the ideas, I will have, bypassing this point. if there is no way, I will write a file, send a email or something like this ;)
Thx for thinking about my problem jschel!! It's great not to be alone.
John

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

Try Here > AMDS > http://support.apple.com/kb/TS1567

Invalid security certificate for my website host-they say the problem is Apple Safari and use Firefox instead

For the past few days, I keep getting an invalid security certificate in Safari whenever I select Edit My Site from my website homepage (http://annaporterartist.com), or whenever I select anything requiring a secure log in from my website host main page (FASO.com). I have contacted technical support at my website host (fineartstudioonline.com) and they say that this has been an intermittently recurring problem in Safari for years and they recommend that I use Firefox instead. As proof of this they emailed a link to an Apple Support discussion, but it was for Mac OS X Lion v 10.7.4 and Safari 5.1, even though I told them I am using Mac OS X Mountain Lion v 10.8.2 and Safari 6.0.2. I do not get this error message anywhere else on the web using Safari. I did try Firefox and it seems to work fine, but I prefer Safari and I want to know why Safari is not working as it should be. I am concerned that there is a real security problem with my website host and I need someone to explain why I am getting this error message, what it means, and if it is, in fact, a known problem with Safari or is my website host corrupted? Really tired of technical support playing pass the buck or pretending the problem does not exist.
The specific error message is:
Their response to my inquiry and my reply is shown below:

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. What is selected in each of them?

Reasons to use AQ instead of 10g messaging service

Similar Messages

Maybe you are looking for