Rebate Agreements: Create Debit memo.

Hi All,
Is it possible to create a debit memo using the rebate agreement functionality (transaction VBO2)?
We are only able to create manual payments that generates credit memos, but we need to post a debit memo due to an overpayment made to the customer.
Can you guys let me know if this is possible?
Thanks in advance to all.
Regards,
Pedro Sousa

Hi Pedro,
In the standard R/3 functionality it is not foreseen to create debit memo requests for rebate agreements. In the standard rebate
process credit memos will be created !
The document type used in final settlement is customized in the field 'Order type for final settlement credit memo request'
T6B1-AUART_B1 which can be changed via VB(2, no matter whether the value positive or negative is.
Also refer subdivision of note-75778.
Thanks,
Alex

Similar Messages

  • How to create Debit Memo in SAP.

    Hi Experts !
    We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction.  I request  you to kindly help me in this regard.

    hai chalam,
    you can create a debit memo to the vendor after closing the po also.
    Under Financial Management --> you will find create credit memo in that you will find document type for debit memo, enter document type,  like that u can create debit memo
    if vendor is one time vendor he will returns the amount as per debit memo,  or if he is a regular vendor it will be converted as down payments or amount will be reduced in the next invoice.
    hope this will help You.
    with regards
    srinivas

  • Creating Debit Memo before return of goods

    Hello,
    Is it possible to create debit memo for the goods first and then return goods to the supplier?
    Regards,
    Rashita Pitafi

    Sorry but I was on vacation
    I know is too late for this reply but the answer is No, the maximum synchronization occurred when self billing (payment on receipt) is turned on; with this setup, once store person receive the supplier shipment, the system generate invoice in payables, and in case of return, you will be able to check the "Create Debit Memo" checkbox in return form to auto create DM upon completing the return to supplier (RTS) transaction.
    Please notice that even with self billing is enabled, DM is only created after/at RTS transaction and this is sound practice; since you should not reduce your liability to supplier as long as his goods are still owned by you
    Regards

  • Create Debit Memo using ORDERS05

    Hello
    I need to create debit memo using ORDERS05 & INPUT_IDOC_ORDERS. I was able to post a debit memo but was not able to send all the needed data through ORDERS05. Is there another basic type/function module that anyone knows through which debit memos gets created?

    Hell all,
    I am having the exact same problem. I have to populate vbkd-sdabw ( special processing indicators )in the sales order via orders05 Idoc. And I have checked all the Idoc segments. None of the segments are working to hold the value for this particular field. Please let me know if this should be a user exit. But this seems pretty standard and I think all the companies use this field. I was wondering why sap will not have a segment for that in the Idoc.

  • Is there any BAPI for creating Debit memo request

    Hi all,
    I used BAPI_ACC_BILLING_POST ,but it does not seems to help me.Is there any other BAPI for creating Debit memo request which takes.
    Thanks and regards,
    Meena.

    hi,
    I could find the following
    Exit Name           Description
    J_3RSINV
    SDVFX001            User exit header line in delivery to accounting
    SDVFX002            User exit for A/R line in transfer to accounting
    SDVFX003            User exit cash clearing in transfer to accounting
    SDVFX004            User exit G/L line in transfer to accounting
    SDVFX005            User exit reserves in transfer to accounting
    SDVFX006            User exit tax line in transfer to accounting
    SDVFX007            User exit: Billing plan during transfer to Accounting
    SDVFX008            User exit: Processing of transfer structures SD-FI
    SDVFX009            Billing doc. processing KIDONO (payment reference number)
    SDVFX010            User exit item table for the customer lines
    SDVFX011            Userexit for the komkcv- and kompcv-structures
    V05I0001            User exits for billing index
    V05N0001            User Exits for Printing Billing Docs. using POR Procedure
    V60A0001            Customer functions in the billing document
    V60P0001            Data provision for additional fields for display in lists
    V61A0001            Customer enhancement: Pricing
    Regards,
    Manish

  • How to create debit memo in SAP R/3

    Hi Experts !
    We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction.  I request  you to kindly help me in this regard.

    Hi,
    I am trying to understand your requirement; You want to pay the vendor after the PO is closed(Del Comp;Inv recieved & Payment done). The payment has to be done because of Pricing diff/overshooted logistics.Did you receive a revised invoice for this? How this is reflected in the system?
    Warm Regards
    Anup Varghese

  • Short Dump in VF01 while creating debit memo

    Hi,
    we are trying to create the debit memo in tcode VF01,while saving the doc it is giving dump.
    i went to  ST22 for error analysis,details are "COMMIT_IN_POSTING" error in FM RV_INVOICE_REFRESH.
    Short text
        Invalid COMMIT WORK in an update function module.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLV60A" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    the above text copied from ST22.
    before putting this thread, i have done complete analysis in SDN .
    i have searched for SAP notes.i did't got the proper one.
    KIindly can u provide any solution.
    <removed by moderator>
    Regards,
    Manjunath
    Edited by: Thomas Zloch on Dec 2, 2011 2:39 PM

    Is the debit memo triggering an output type?
    I saw similar thing long back and I remember it was caused by a output type with a print program that was doing an illegal COMMIT WORK. Actually sometimes there may be a function call inside the program attached with the output type that may be doing a COMMIT which is not directly apparent.
    COMMIT WORK causes runtime error when it occurs in functions called in UPDATE TASK or forms called with ON COMMIT.
    Try disabling / deleting the output type (Vf01 -> Goto -> Header -> Output) proposed and then save the debit memo and see if this error goes away. You can also try select the output type and click further data and set dispatch time to '1' (send with periodically scheduled job to avoid this issue.
    Check threads with people facing similar issues because of commit in output type programs
    Send Immeditely causes COMMIT_IN_POSTING
    Need input for error caused while trggering a output type
    COMMIT_IN_POSTING
    COMMIT_WORK in FM, SO_DOCUMENT_SEND_API1

  • Facing issues while creating Debit memo using FM SD_SALESDOCUMENT_CREATE.

    Hello,
               While  trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
    1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
    2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
    My FM i/p is as follows:
    SALES_HEADER_IN- REFOBJTYPE -ZSB1
                                     REFOBJKEY - billing doc num
                                    DOC_TYPE - ZDRM
    LOGIC_SWITCH-COND_HANDL
    SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
    SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
                                            COND_COUNT - Cond count (  " )
                                            COND_TYPE - Condition type
                                            COND_VALUE - value
                                            CURRENCY - currency
                                            CONDVALUE - value
                                            CURRENCY_2 - currency
    SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
                                               COND_ST_NO      same as above
                                               COND_COUNT     same as above
                                               COND_TYPE       same as above
                                               COND_VALUE - X
                                               CURRENCY - X
    Please help me overcome this issue.

    Hello,
               While  trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
    1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
    2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
    My FM i/p is as follows:
    SALES_HEADER_IN- REFOBJTYPE -ZSB1
                                     REFOBJKEY - billing doc num
                                    DOC_TYPE - ZDRM
    LOGIC_SWITCH-COND_HANDL
    SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
    SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
                                            COND_COUNT - Cond count (  " )
                                            COND_TYPE - Condition type
                                            COND_VALUE - value
                                            CURRENCY - currency
                                            CONDVALUE - value
                                            CURRENCY_2 - currency
    SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
                                               COND_ST_NO      same as above
                                               COND_COUNT     same as above
                                               COND_TYPE       same as above
                                               COND_VALUE - X
                                               CURRENCY - X
    Please help me overcome this issue.

  • Rebate Agreement Create/Change by BAPI_AGREEMENTS, BAPI_PRICES_CONDITIONS

    I have to create/change Rebate agreement by the transaction code VBO1 and VBO2. I found two function modules(not RFC) BAPI_AGREEMENTS and BAPI_PRICES_CONDITIONS. However I found these function modules are not SAP Released yet (in ECC 6.0). Is it okay to use thesebfunction modules. if not, is there any other FM/Bapi for this.

    HI,
    You can create the Rebate Agreement using this BAPI BAPI_AGREEMENT
    You have to pass the following fields :
    Operation      :  005
    Agree_Cond : $
    Sales-Org :
    Distr_Chan :
    Division :
    Agr_Type :
    Category : A
    Application : V
    Recipient :
    Ex_Descr :
    Valid_From :
    Valid_To :
    Cond_Group : This value you can find from SPRO. Search for Rebate in Search Tab; there you will get the link in Billing.
    This will solve your purpose.

  • Create debit memo from Contract w/ DP91

    Hi everyone,
    In the process I use, I create a sales contract with an item containing a DIP profile. I use the pricing type PR00 with the price I want.
    I don't have any price condition for PR00 for the material I use since the price will change every time I create a new contract.
    The copy control in SD \ Sales \ Maintain Copy Control for Sales document in the customizing specifies that between the contract and the debit memo, the pricing type is G (Copy pricing elements unchanged and redetermine taxes).
    But when I use TCode DP90/DP91, the price types are NOT copied to the debit memo.
    Does anyone know what I can do so that the price conditions can be copied from the contract to the debit memo when I use DP90/DP91 ?
    Any help appreciated !
    Olivier

    Hi,
    DIP settings you have to choose actual costs and line items 100%  in sources segment (Usage billing and result analysis).
    In copy controls, maintain 251-conditions in FPLA field (item).
    Regards,
    Chandra

  • Creating Debit memo with running sequence

    HI ,
    I am creating steel surch debit memo from my report (VA01 Transaction order type zdr1),there is one condition if net value GE selection screen  value only that time i should commit the sales order,Now if condition is not matching BAPI_SALESDOCU_CREATEFROMDATA generating salesdocument and i am  skipping  BAPI_TRANSACTION_COMMIT ,now if i run my report again and this time condition satisfied it is generating sales document with other number in a running sequence(Ex 123 sales document not satisfied the condition i didi'nt do the transaction commit,next time again i run bapi it is creating sales documnet 124,but it should create with 123 because i have not done commit),else
    is there any way  that i can  calculate the net value with respect to all billing documentd with condition type and condition value before calling the BAPI_SALESDOCU_CREATEFROMDATA

    Hi,
    V will populate the fields from the Customer master data, but I want to populate from the original document that our Debit memo is created with reference to.
    Thanks a lot for your answer.
    Desimira

  • Rebate Agreement  TO Credit Memo Request No.

    Hi All,
    Here's the scenario, when i'm creating a Credit Memo No. in VB(7, a CM number will appear. My problem is, how can i get the BILLING DATE (SOURCE CODE) when displaying in VA03? what userexit or routine should I be using? Is there any way to find how the system displays the BILLING DATE?
    Thnx and regards,
    Mackoy

    So Vijay what I am hearing you say is pricing is correct, but you don't want to display cost, is that correct?  If so you can use Security to block visibility of the condition type.  If you don't want to have cost in the pricing at all then use t.code v/08 to remove the condition completely.
    Good luck

  • Creating a debit memo request with reference to an invoice

    Hi,
    An invoice shows wrong MWST value because of incorrect customer tax classification as Tax exempt. I corrected the cust tax classification to "Liable for Tax". Then I tried to create a debit memo request with reference to the incorrect invoice. Thats a requirement by the customer. Invoices with incorrect VAT are not to be cancelled. A specially created VAT only sales order (Debit memo request) is used to create a sales order with 0 net value and correct MWST . But while trying to create the debit memo request, the system picks up the same old condition record for the MWST. How to overcome this situation ?
    The copy control for the item category from billing doc to debit memo request is set to "B" that is  new pricing. I even tried to update pricing. But it does not work. Changing the Service rendered date or the pricing date to current date also does not help.
    Please help.
    Regards.

    This is working fine. What I did was
    1: create a new pricing procedure
    2: made the PR00 condition statistical
    3: using a routine calculate the MWST based on the PR00. But PR00 itself does not contribute to the net value. This part is working fine. I could create debit memos successfully.
    The problem is if we change either the customer or the material tax classification after creating the invoice, and then create a debit request with reference to the incorrect invoice, the system still considers the old tax classfication and therefore the old MWST rate. If I create a debit request without reference, the new rate is applicable.
    I hope I have made clear.
    Regards.

  • Rebate Agreement accruals invoice reports

    Hi Team,
    As per my client requirement we need to prepare the below  rebate agreement accruals invoice report.
    Rebate agreement
    Rebate recipent
    Customer
    Invoice date
    Invoice
    Invoice Item Number
    Rebate Material
    Rebate material net quantity
    Invoice price
    Rebate accural  condition ( % or $)
    Total Rebate amount
    GST
    20000
    123456 (payer)
    1000
    01.01.2014
    987654321
    110
    ABC
    20
    10.00 $
    $ 10.00
    $ 10.00
    20000
    123456 (payer)
    1000
    01.01.2014
    987654321
    140
    ZYX
    5
    5.00 $
    $ 0/50
    $2.50
    We have prepared the report using rebate tables and achieved the results but we missed below one logic here.i.e.
    Business want to maintain the rebate accruals condition records for few customers accounts in the rebate agreement although it’s not related to rebate receipts account.
    Example: rebate agreement: 20000
    Rebate receipt: 123456 (Payer account)
    Rebate condition records
         1)    Customer & material combination – customer # 1000 and material # ABC – 5.0 % - appearing the reports –Status : Working appearing the reports Customer # 1000 Payer is -123456
    2)       Customer # 9999 and material # ZXY – 5.0% - Not appearing the report – Status: Failed
    Customer # 9999 is Payer – 88888 – both accounts are don’t have any PF relationship with rebate receipts # 123456
    When Rebate Condition records are maintaining for Rebate receipt related to customer (SP) account & material combination level in this scenario – Reports working fine .However, few scenarios like business need to maintain rebate accrual condition records for other payer customer accounts in the same agreement in this scenario – Reports is not pulling the invoice accruals due to logic missing our early logic given based on the rebate recipient customer level. I am excepting a technical logic with functional details in this.
    Could you please help me.
    Cheers,
    Jackon Robert

    Hi Omer,
    Proposal:
    Setup your rebate condition as amount = 0 and accruals = $
    The system will do the accounting movements for the accruals as usual
    When doing the final settlement in SD, nothing will be credited to the customer as the rebate condition is zero BUT the accruals will be reversed (as usual when doing the final settlement).
    That should work because it is standard SAP logic.
    On the other hand, it is a pity not to be able to credit the customer if you already have the rebate agreement created in the system.
    Are you 100% positive about this legal issue in your business environment?
    I did a few rebate projects in FMCG and it is standard practice to send credit memo to the rebate recipient: The Customer (Payer in SAP).
    Nobody ever said it was a problem, because practically speaking it is just one more credit note to the same customer that was invoiced beforehand!
    Best Regards,
    Franck Lumpe
    Freelance SAP Consultant

  • Rebate Agreement Accruals

    I have this peculiar requirement.
    We are using Rebate Agreements for Sales Volumes with Rebate Condition Scales.
    We should NOT be paying the customer through the AR credit memo, because of Legal Issue.
    So we have developed a nice solution, which includes not to post any Settlement Credit Memos (by removing the account determination). But to settle it through AP.
    Doing this has left us with a lot of Accruals during sales.
    I need help, in how to reverse the Accruals?
    Thanks
    Omer

    Hi Omer,
    Proposal:
    Setup your rebate condition as amount = 0 and accruals = $
    The system will do the accounting movements for the accruals as usual
    When doing the final settlement in SD, nothing will be credited to the customer as the rebate condition is zero BUT the accruals will be reversed (as usual when doing the final settlement).
    That should work because it is standard SAP logic.
    On the other hand, it is a pity not to be able to credit the customer if you already have the rebate agreement created in the system.
    Are you 100% positive about this legal issue in your business environment?
    I did a few rebate projects in FMCG and it is standard practice to send credit memo to the rebate recipient: The Customer (Payer in SAP).
    Nobody ever said it was a problem, because practically speaking it is just one more credit note to the same customer that was invoiced beforehand!
    Best Regards,
    Franck Lumpe
    Freelance SAP Consultant

Maybe you are looking for