Rebate : Scale base value is showing zero

Dear Friends,
While configuring Rebate Processing I am getting following problem :
Description: We are Maintaining Condition record on basis of Product Hierarchy for Rebate agreements.
Problem : When we want to view Rebate Payments -> Verification level, the Quantity under Scale Base Value is showing zero but appropriate accruals is coming.
My end user wants apart from Cond.base value & Accruals the Scale Base Value (which shows Quantity) should also come so that he can have a idea on what value and quantity the rebate is been given.
Note: For each Product hierarchy we are maintaining one of the SKU relevant for Product hierarchy in material for settlement field.
Expecting a good answer from u all sap gurus.....
Thanks in advance.
Regards...
Tushar

Hii There
This kind of problem was existing in my system too.
I raised this with SAP people and they told me to apply SAP note no.# 970384 after which the scale base quantity was appearing.
You could try this out.
Thanks & Regards
Gaurav Manocha

Similar Messages

Rebate: Differ "Scale Base Value" between "Statistics" and "Billing Doc"

Dear SD Expert,
After I go with Transaction Code :"VOB3" (run report RV15B002), I found that "Scale Base Value" have different value between "Statistics" and "Billing Doc". And the correct value is "Billing Doc". However, the value which shows in my rebate condition now is "Statistic". Thus, my question is
How can I configure my rebate condition based on "Billing Doc" Value instead of "Statistic"? (I don't want to "Correct backlogs" anytime in changing scales based value.) Anyone please feel free in suggestion.
Thanks,
Prach

HI,
This may be useful to you.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/5612d8545a11d1a7020000e829fd11/content.htm
Vrajesh

Rebate agreement - cond. base value and scale base value

Hi,
Good day!
I just like to ask the possible reason for the <b>cond. base value</b> and <b>scale base value</b> in rebate agreement (path: rebate payments -> verification level) to contain zero values only.
thanks,
nerissa

*

Scale base value in rebate processing for CM /DM must not be updated

I created a rebate condition type with calculation type A (percentage) and scale basis C (qty). The billing types for credit and debet memo are set relevant for rebate (TVFK-BORVF). The value of a credit / debet memo is added to the condition base value in the rebate agreement and the quantity to the scale base value (standard). For us it is not an option to create credit and debet memos without quantity. What I need is that the value is added to the condition base value but the quantity is not added to the scale base value. How can I achiev this?
Example
standard order   Qty 1100, value 11.000
CM                      Qty 200, value 500
Rebate agreement with scale
0 to 1000    4%
from 1000 5%
The final settlement must calculate 5% over 10.500. Currently it calculating 4% over 10.500.
Thanks in advance

hi,
check out the following link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/de/5e74c39d3211d596fc0000e835339d/frameset.htm
Regards,
siddharth.

Scale base value with price discrepancy credit note

Hi gurus,
I have a problem in which credit notes for price discrepancies are having direct effect over scale base value in structure S060. I tried to modify the update rules, but found out this is hard coded for this structure. The other solution will be maybe to include a new pricing procedure and sales document just for discepancies, handling a fixed value condition type. Since the rebate which is experiencing the scale base value update is a quantity rebate I don´t know if it will have the desired effect.
The question is:
Is it possible to avoid the update to S060 through a user exit?
I saw RV60AFZZ could be used, but I´m not really sure if it will work to avoid quantities update ?
Thanks for your time and help.

hi,
check out the following link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/de/5e74c39d3211d596fc0000e835339d/frameset.htm
Regards,
siddharth.

Scale base value calculation ( Pricing!!)

Hello,
I have issue, when I am creating a credit memo request (Va01 order type is customized) with reference to billing document. All the items and prices are copied properly. But the scale base value is not copied properly. In the credit memo request (order) for each an every item the scale base value is as same as condition base value. But in the invoice (billing document) the scale base value is added with the pervious item scale base value.
Actual by functionally the scale base value of item should be added with pervious item scale base value (if the items are same).
In code the FM PRICING_COPY is copied all the details correctly and then in the FM PRICING this mismatch is happening.
The scale base value is not getting added with the pervious scale base value.
I have found the condition control ( KOMV-KSTEU ) for that item is D (Fixed) in the credit memo request (order) but in the billing document the condition control is A (Adjust for quantity variance) .
I want to know what is significance of this condition control field (KOMV-KSTEU).
I didnt get much information on this field by doing F1 on this field!!!
Please give some inputs.
Thanks in advance,
Siva.

Hi,
Goto transaction VOFM and in the blue menu bar click on Requirements in the blue menu bar at the top of the screen.
Here you can include your new requirements.
Regards
Karan

Scale base value total $ based on confirmed quantities

Hi,
I have a requirement from my user and i think of a solution but wondering if there is a more standard SAP solution without programming a formula. Here is the case :
We want to give special discounts on non current material. Material that are from last season and that we want to sell all the remaining items.
So when the total $ of the line will exceed for example 100 000 $ then, the customer will have a 20 % discount but of course we want to consider only confirmed quantities as it is sold-out items. If for example, we have 100 items remaining, we don't want the customer to order 500 items in order to reach the 100 000 $ as for sure, we will never ship the 400 remaining items as we will never have more available items.
So i'm proposing the create a new discount condition type for which we will use value scale (B as a scale basis). But the scale base value should be total net price for confirmed quantites only. The solution i can do is program a scale base value formula that will multiply the confirmed quantity by the net price to obtain the total net price for confirmed quantities for the line. And also, i will have to take care of currency calculation if the document currency is not the same as the condition record currency.
Is there another way to do it more standard SAP ?
And also if i want to use group condition in order to calculate the total net price on multiple items eligible for the discount ? Will it work ? will it sum all the total net price for confirmed quantities ? (scale base value).
Thanks.
Myriam
Edited by: Myriam Catrycke on Aug 7, 2008 3:29 PM

Hi,
We don't want to pay retroactively but at the order time. Our customers order on line and we want them to see immediately the discount they will have.
Thanks for the suggestion.
Myriam

Scale base value condition pricing

Hello I am creating a pricing condition ZPC1 that will only be applied to about half the items on the sales order but will be Scaled base need to be on the total number of items ordered weather the condition is applied to that item or not .
For example
The scale will be
0 -500       $1 per case
501 - 100 .50 per case
item 1    500 case order    will have pricing condition ZPC1
item 2    500 case order    will NOT have pricing condition ZPC1
I want the Scale price to be $.50 per case on item 1 not $1 per case.
The condition type is set up as
Scale basis C Quantity scale
Thanks James

Dear James
Go to V/06, Selct your condtion type ZPC1, open controls.
In Scales Change Check value from Descending to Ascending, save.
Now go to vk11 and maintain the condition record,
enter line item , select, click on scale, put your range and amount.
Save it, Either overwrite previous one or go to vk12, delete previous entry and then go ahead with the steps mentioned above.
Regards
Pavan

TAXINN - Base Value in Migo for the item is ZERO

Hi,
We are using TAXINN Tax Procedure.
In MIGO Excise Item Tab, Base value is coming zero. Also it is updating in Excise Registers 23A part I & 2.
Can anybody tell me where i am doing a mistake.
Thanks in advance
KK

Hi Bharat,
Thank you very much for your quick response.
It is not intra company STO. This is normal procurement from the outside vendor.
Can you explain me why it is coming Zero
Hope it is clear for you
If you have any query, please do not hesitate to ask me
Thanks in advance
KK

Issue with Scale base routines in Pricing

Hi All,
This is regarding one issue I am facing in Invoice creation.
It happens randomly in some invoices (impact is in <5 % of invoices) that a discount condition value is incorrectly calculated when created through batch job.
This issue is not replicable in any of the lower environments.
When we cancel the invoice in produciton system and recreate it, the values are calculated correctly and we failed to replicate it even in production to find the root cause.
Here are the details:
We have a custom condition type which is a group condition (header as well as item) which is set in percentage where customer is supposed to get a discount (for eg. 1 % on the net price)
We have a Scale Base value routine which fetches the ‘scale base value’ from a custom table and assigns it to the item on the invoice (XKOMV-KSTBS).
All further calculation happens in standard SAP code where it checks the scales maintained in the condition record and applies the correct rate so the discount is applied accordingly.
Our pricing routine is working fine and is passing correct value to the scale base field.
The issue is in standard SAP code which applies the discount.
For all the impacted invoices, we have correct scale base values (fetched in our routine) but the corresponding discounts (KONV-KBETR and KONV-KWERT) are zero.
Only the last item in all the invoices shows a large negative value which is wrong .
Please guide me in finding the root cause.
Regards
Ritu

Hi,
These requirements should be met to fetch the condition record in the document.
1 = Different Payer
If this requirement is assigned to the condition type, the sold-to-party and payer should be different, so it will be picked up in the document.
2 = Item with Pricing
The item category of the item should be relevent for pricing.
3 = Foreign currency doc
The company code currency is derived from sales org in a sales document. But we can change the document currency in the sales document header also. And condition also can be maintianed in different currency. If this requirement is assigned, the company code currency and document currency should be different.
4 = Cost
If this requirement is set, the item should be relevent for cost determination (setting in item category)
5 = No Condit Exclusion
If this requirement is set, it will not consider the condition, if any condition exclusion is maintianed for it.
Prase

RE:cash discount base value & it being populated in accounting doc

hello friends,
i am explaining the problem clearely again.
when we post an invoice to a customer,it generates an accounting document.
when we see this accounting document,the field discount base amount is showing zero.it is not populating any value.
the requirement is that this field should populate the discount base value & the discount should be calculated on the grossvalue(inclding taxes)of the invoice.
please help me how to & where to configure this.
thanks in advance.

Hi Ram M,
I have the same issue. Did you get a reply on this?
Regards

Base Value in Good receipt

Dear Experts,
While executing MIGO, goods receipt for outbound delivery, base value is showing as zero.

Hi,
If its STO, then please check whether outgoing excise invoice has been created in J1IS (intra company STO) or J1IIN (cross company STO). You need to create outgoing excise invoice based on the PGI document and then do MIGO. Please check and revert back.
Regards,
AKPT

Pricing condition type with Scale basis "G"

Hi,
Did anybody tried to use scale basis "G"?
I created formula for scale base where I calculate xkwert. The value seems correctly transferred to kstbs (scale base value) in sales order pricing, but the amount of the condition is not recalculated accordingly.
Thanks
Carlo
I solved the problem today. Thanks all.
Message was edited by: Carlo Noventa

Hi Tushar
You need to create your own formula or routine in Transaction VOFM.
Put this routine in front of your condition type in Pricing procedure.
Also in maintain condition types keep your scale basis as 'G'
Reward if this help.
Regards
Karan

PO-Item detail-Condition Base Value

Hi expert,
May I know how is the system calculte the "Condition base value" in PO item condition detail.
For example: I issue PO qty 100, net price 2.12 USD, total net 212.00 USD and condition type "ZXXX", in item condition detail (Condition base value) is show "21,200".
I'm wonder how the system get value "21,200"? why it is multiply by 100?
Kindly explain. Thank you.

Hii Kah,
its coming right., its multiplying the QTY with Net-price.
if u want to know that how system is calculating? then i will tell , this calculation is depends upon the calculation type of that condition, change the calculation type of that condition and see the diffrenecs.
hope it will help u.
else revert back.
Thanks
Pushpa
Edited by: Ms. nisha on Jun 16, 2011 8:42 AM

Scale Base Pricing

In pricing we have scales setup by Material Family (material price group) so if you enter three different materials from the same family it accumulates the prices on all three line items and each line item has the same price according to the family scale. But for one sales order type (AUART) the scale needs to be for line item only and not by family. The condition type is ZR00 and the scale basis is C. The requestor does not want to have to setup any master data so that is why I cannot create a new condition just for that sales order type or an additional access by order type. Would like to know if I can do this with a routine or formula and how it would be done.
Thanks,
TRB

Hi Toni
The logic has to be written based on the summing up of all requirements.
For eg, in your example, you want the third material to behave differently in Quotations. Like that if more materials are there to behave differently in picking up the prices from scales, the option will be to have a bespoke table carrying a possible combination of material pricing group / materials with a key field in the table which decides how the scale base value should be picked up. A logic can be written in such a way that if this key field is on, the scale base value should be picked up different to that of the normal logic which can be coded through ABAP.
I have worked on scales but not exactly to this requirement. My suggestion would be follow this route, if the client is still not convinced on changing the master data. Again this solution will work if the number of materials is not very high because of performance issues in pricing. The logic will depend on number of materials & pricing master data scale value, hence this solution has to be validated according to the requirements. Huge amount of testing will be involved in this for sure.
Hope it helps.
Regards
Nara

Rebate : Scale base value is showing zero

Similar Messages

Maybe you are looking for