Rebel xti...all pics using creative zone modes (P, Tv, Av, M) have a blue hue. Basic zone is good

Rebel xti problem...all pictures taken using any creative zone modes (P, Tv, Av, M) have a blue hue.  All pics using basic zone modes (portrait, landscape, etc) are great.  must be a setting somewhere...please advise...thanks...tom

Check your White Balance.
Basic Zone use Auto White Balance. Creative Zone use whatever you set. If you get Blue cast, then it must be set to Fluorescent or Incandescent.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Similar Messages

  • I was organizing my photos into albums. then deleting them from my Camera roll. Then I went into MY Photo Stream and started deleting the pics I had moved to albums;Come to find out I deleted all pic from everywhere!!  Would the iCloud still have them sav

    I was organizing my photos into albums. then deleting them from my Camera roll. Then I went into MY Photo Stream and started deleting the pics I had moved to albums;Come to find out I deleted all pic from everywhere!!  Would the iCloud still have them saved

    First of all, you should always save you photos on computer like any other digital camera.
    Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
    Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
    What computer do you have?

  • I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

    I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

    Open Media Encoder and add your Sequences:
    File > Add Premiere Pro Sequence
    Navigate to your Premiere Project and select it in the list.
    You can then select multiple Sequences from the Project (Ctrl+Click)
    and load them all at once into Media Encoder and apply
    the same encoding preset to all Sequences at the same time.

  • I'm using creative cloud team. Does the administrator have to release the updates?

    I'm trying to get the most up to date versions of CC downloaded for my team - does the administrator have to release the updates for the whole team?

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Rebel x3i (600D) autofocus not working in Creative Zone mode. Works okay in the Basic modes.

    I bought a Canon refurbished x3i from Canon last Summer after my Ritz Camera extended warranty became useless and my xTi (400D) died. The camera has been excellent until very recently.
    About a week or so ago, the autofocus stopped working. I think it started when I decided to try the Canon refurbished 50mm 1.8 lens I bought off the internet. It didn't work for that lens and hasn't worked in Creative Zone since.
    There is an asterisk (*) in the lower left corner of the viewfinder. This is an AE progress indicator. There are no active Focus Points. Sometimes, all nine of them will light up, but it doesn't mean anything.
    Based on responses to other forum posts, I have tried different EOS lenses (I have two Rebel film cameras) and I have tried LiveView. Same problem. I can live with the situation, but, obviously, I would rather not.
    Naturally, Manual Focus works fine.
    The pins on the camera look and feel fine - no bends or broken tips. The pins on the lenses look fine, too, even the 50mm.
    (I haven't contacted Canon, yet, because after-the-sale guarantees are usually 30-90 days, but I will contact them tomorrow)
    Solved!
    Go to Solution.

    I don't think you are getting the camera cleared and reset.  You MUST clear all settings.  It sounds like you have focus lock set to ON.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • HT5097 I recently upgraded my macbook to Mountain lion.  Before doing so I used time machine and an external hard drive to back up my entire laptop.  When we upgraded my computer came back like new. All pics, music, videos documents etc gone.  How do I ge

    I recently upgraded my macbook to mountain lion.  Before doing so I used time machine to back up my entire laptop with an external hard drive. 
    When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone.  How do I get these files off the external hard drive and back onto my laptop with the new upgrade?

    I recently upgraded my macbook to mountain lion.  Before doing so I used time machine to back up my entire laptop with an external hard drive. 
    When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone.  How do I get these files off the external hard drive and back onto my laptop with the new upgrade?

  • I have bought a Apple iMac with Retina 5K display! Can I use it with all my Adobe Creative Cloud

    I have bought a Apple iMac with Retina 5K display yesterday! But today I read something negative about this Imac regarding to to Adobe Creative Cloud, - so I would ask if I can use this iMac with Retina 5K with all my Adobe Creative Cloud programs??
    I have not unpack it yet, so I would be happy if you could tell me if I should keep it or exchange another Mac if this iMac with Retina 5K display does not work OK in Adobe Creative Cloud. I mostly use the programs Photoshop, Illustrator, InDesign, and Muse.
    I look forward to hearing from you!

    WOW!!
    That was great to hear.
    I have just read this tread: https://forums.adobe.com/thread/1626784?start=0&tstart=0
    So therefore I was worry about Illustrator which I use most of all programs.
    Thank you !!

  • I have an I Phone 5 White 64G, 1/12 month old , and I was an a call and I use the speaker mode , then all the sudden I couldn't hear anything ... I reset the mute switch , I reset setting to factory setting and still no sound... I think speaker just burn

    I have an I Phone 5 White 64G, 1/12 month old , and I was an a call and I use the speaker mode , then all the sudden I couldn't hear anything ... I reset the mute switch , I reset setting to factory setting and still no sound... I think speaker just burn out:(

    sunshinesunshine wrote:
    So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
    Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

  • Windows 7 64 bit canon rebel xti compatibility issue

    I am having trouble to get my canon rebel xti (400D) to work under windows 7 64 bit. You see the canon camera icon in the devices and printers window with a yellow triangle indicating it's not working properly. Did anyone have the same issue and even got an answer to it?
    Thanks.

    I believe I have a solution for you and any other XTi owners who don't have the "Print/PTP" option in their menu.  I was able to get my XTi to function with Windows 7 64-bit last night.  Here is what I did:
    1) Installed the default Canon utilities disk that came with the camera (which installed without an issue, but wouldn't recognize the camera).
    2) I downloaded the updated EOS Utility version 2.6.1 for Windows Vista x64 from here:http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=14256
    3) I installed the default Canon utilities disk that came with the camera (which installed and opened without an issue, but wouldn't recognize the camera to download pictures).
    4) I executed the 2.6.1 EOS Utility update that I downloaded and received the following error: "Installation program of EOS Utility requires administrator priveleges" even though it was being run as an administrator.  Any compatibility options that I selected on the installation resulted in the same error.
    5) When you receive the error mentioned in the prior step, DON'T click the "OK" button.  First, navigate to the follwing path: "C:\Users\admin-user\AppData\Local\Temp\".  Inside this directory, you should see a directory named something like "CanonUPW_000".  Copy this whole directory to another location, then click "OK" on the installation program error on the screen (which removes the directory you just copied). 
    6) Open the directory that you copied in the last step and navigate to the following location: ".\CanonUPW_000\INST\INSTALL\COMMON".  You should find an "Install.exe" file in this directory.
    7) Open the properties of this "Install.exe" file, then select the "Compatibility" tab.
    8) Select the "Change settings for all users" button and select the "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3).
    9) Under the "Privilege Level" section, select the "Run this program as an administrator", then click OK twice.
    10) Execute the "Install.exe" file.  The installation should start and finish succeffully.
    11) The EOS Utility should successfully open after you execute it (following the installation).
    12) The only thing that doesn't work exactly the same as with using EOS Utility with XP.  When you plug your camera in, the program doesn't automatically open.  After opening the EOS Utility, you can connect the camera and download pictures, or utilize the software's remote control function. 
    I hope this works as well for you as it did for me.

  • Using the Safe Mode function on your PlayStation 3?

    i followed the steps it works fine then when i sign in within a afew seconds it cuts off and gets a red flashing light again i dont know what to do :/

     
    RabidWalker wrote:
    Using the Safe Mode function on your PlayStation 3?
    Safe Mode:
    The option to use Safe Mode on the PlayStation 3 was introduced if a problem occurs where it will no longer start up normally.
    To use this feature the console will need to have the System Software update 2.60 (or later).
    When to Use Safe Mode?
    When starting up the PlayStation 3, and the XMB menu no longer appears (you may see a wavy line on the background instead).
    When the PlayStation 3 is started up, nothing appears on screen.
    When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s file system is corrupted and will be restored’. When selecting ‘OK’ the system restores and restarts, however the same message appears.
    When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s database will be rebuilt’. When selecting ‘OK’ the system begins the operation and then fails (stopping the restoration of the HDD).
    There is an issue after the PlayStation 3 update process is started, or a rebuilding of the database occurs.
    Safe Mode procedure:
    1)    Ensure the PlayStation 3 is in standby mode (where the red light is apparent), and then turn the console off at the mains switch.
    2)    Turn the mains power on, then while in standby touch and hold the power button.
    3)    Keep your finger pressed on the power button (after 5 seconds you will hear a beep).
    4)    After 10 seconds of holding your finger on the power button, you will hear a second beep and the console will shut down (you can remove your finger).
    5)    Touch and hold the power button again.
    6)    Again hold your finger down on the button until you hear another beep after 5 seconds.
    7)    A number of seconds after this you will hear a double beep- you can remove your finger.
    8)    You will be prompted to plug your controller in and press the PS button on your controller. After doing so you will access the Safe Mode menu with a number of options.
    Safe Mode Option Screen:
    Restart System
    Selecting this option will start up the system normally- It will also allow you to exit the Safe Mode Menu.
    Restore Default Settings
    Selecting this option will restore Default settings on your console (when starting the unit you will be prompted to set time, time zone etc). This option will also delete your PlayStation Network account information from the system.
    Your User information will be deleted and restored- the indicator will be an asterix by your username e.g. *RabidWalker.
    When logging into your user you will encounter no issues with disc based games. However when attempting to play PSN downloaded games you may encounter the message:
    ‘To access the system, you must activate the system.
    Go to [PlayStation Network] > [Account Management] to activate this system. (80029514). ’
    Follow the instruction to activate your PlayStation 3 to play downloaded games (if the system is activated, deactivate and reactivate the system)
    Restore File System
    This option will begin a process to repair data on your Hard Disk Drive. Therefore it will check for any corrupted data and try and recover this. It the data cannot be recovered it may be erased to ensure that it does not interfere with the operation of the PlayStation 3.
    Rebuild Database
    If issues continue to persist and you select this option please note that data will be removed during this process.
    The following information will removed:
    -          Messages
    -          Playlists
    -          User changes to Information Screens
    -          User changes to Picture under Photos
    -          Video Thumbnails
    -          Video Playback History
    -          Video Resume Information
    This process may take same time to complete
    Restore PS3 System
    The option to restore PS3 system is the same as the ‘quick format’ option on the XMB menu. It will reformat the HDD, removing all data and restoring the Hard drive to its original state.
    System Update
    Selecting this option will install the PlayStation 3 Update but only if the update is on an external media storage device plugged into the console.
    This option can be used if any issues are encountered with the installation of the System software update.
    If you have any queries regarding this or any other issues please PM me or catch me on Twitter
    @RabidWalker
    Rabid
     

  • Downloading raw images from Canon Rebel XTi and problem with Border FX

    Aperture no longer downloads raw images from my Canon 400D / Rebel Xti and installed Lexar Professional UDMA card. I am able to download images to my Dell laptop. This is a new phenomenon only occurring since about 10 days ago. I am currently able to download images from my Canon 5D.
    Also, my computer has locked up 4 times today when I have been starting Border FX. I have seen a screen saying that I have to restart my computer by holding down the on button. I have the most recent version of the Border FX software.
    Any suggestions please?

    Join the crowd! I just started to experience exactly the same thing on both of my systems. Apparently the latest raw camera drivers broke something related to Canon Rebel cameras. I'm using the Rebel XT.
    I tried a quick experiment the other day. I shot a bunch of test photos forcing the camera to store them as JPEGs. I was able to download those without a problem. I then forced the camera back to raw mode and shot a few more pictures on the same memory card. The JPEGs that I was able to download previously no longer will download and neither will the raw files.
    I tried reverting to the older camera raw driver on my notebook but for some reason it won't let me do that. I haven't tried reverting on the desktop yet.
    Hopefully this problem is fixed quickly. I've got a ton of pictures from a recent vacation I'd like to off load.
    By the way, this affects the iPhoto, Aperture and Image Capture apps.

  • IPhoto + Rebel XTi in RAW

    Recently I changed my camera to shoot in RAW format because of all the benefits it provides. Now the problem is, I have maybe 110 RAW's in my camera i'd like to load into iPhoto. Whenever I plug my camera into the computer, iPhoto opens and says they're trasnfering but after a few mins it's evident they are not (using the usb cable, I don't have a card reader).
    Can iPhoto not read the RAW's i'm trying to transfer? I read somewhere about them having to be in .cr2 format or something.
    Help please, thanks!

    Andrew:
    The Canon Digital Rebel XTi is supported by Leopard so that shouldn't be the issue. Try opening Image Capture, located in your Applications folder, and use it to upload the files to a folder on the Desktop first. Then import them into iPhoto from there.
    Although you don't have a card reader I recommend you do get one as it's a much safer method of uploading from the camera as it saves wear and tear on the camera's port and battery and avoids possible aborted uploads due to a low battery.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Creative X-Mod Not Working

    I have an old Creative X-Mod (http://us.store.creative.com/Creative-Xmod/M/B000IZ96LQ.htm) that worked great up through Lion. I don't think I ever had to install drivers for the thing. OS X just always detected it as a soundcard and I was all set.
    After upgrading to Mountain Lion, however, no sound comes out of it. I still see it listed as a device under the sound preferences, but I don't get any audio regardless of the app being used. I know this is a really old product, but has anyone figured out how to get it to work in ML?

    Exact same problem here. Device works great but every time I wake my Mac Mini from sleep, I have to unplug the USB connection at the back of the Mini and plug it back in. Then it "activates" the sound through the Xmod. The device doesn't have any drivers and Creative seems to have completely stopped supporting it and doesn't offer a newer equivalent device that I can see.

  • Using Creative Cloud for teams on non internet workstations

    Hi Folks,
    Am interested in running creative cloud on workstations that do not have internet access.
    This is because of security issues and Non Disclosure Agreements.
    Internet will only be enabled by ICT  admin for activation.
    Is there a manual procedure to validate the software on a machine with admin provided Internet before the 30 days of use elapses?
    Kind Regards,
    AC_ICT

    In a broadcast environment where all our edit bays are offline behind firewall.  I've installed all our CC team seats and only have to take them online every 90 - 120 days or when updates are needed. Any users that see the license countdown are told to contact IT and I take the machine online manually, check for updates and that seems to give CC Aps enough time to touch base with the license server. Take the users offline and back behind the firewall till the next countdown begins.  Rinse, Repeat as needed. This is the manual way, otherwise you need to set up a Adobe License or Update Server behind your firewall that you then deploy updates as needed.
    Andy

  • We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

    We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
    I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights". 
    There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
    We are in an enterprise environment and users simply do not have administrative rights on the computers.
    I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
    Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
    Any help or suggestions are greatly appreciated.

    Jeff,
    Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
    The apps do not load with their current standard user permissions.
    The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
    This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Maybe you are looking for