Rebuild of mediadatabase.db3 not automatic; how to force rebuild?
I had posted earlier (http://forums.adobe.com/thread/570503?tstart=0) regarding adding layer masks to PSE 6 and was successful on my laptop but when I repeated the process on my desktop mac, the auto rebuild of this file (mediadatabase.db3) doesn't occur. Is there some means for me to force it to occur?
According to the instructions, it should be rebuilt upon restarting PSE6 after adding the layer mask .atn and .png files.
Finally, success! When you run the Photoshop Setup app, you are given two options as in the 1st screenshot below.
My problem was because I chose the 1st option (thinking that choosing "Reinstall" would be an 'uninstall & reinstall' function) which seemed to maintain the mediadatabase.db3 file even though I had removed it manually to trash & emptied trash. However, when I chose option 2 (next screenshot), this removed PSE6.
Then, run the Setup app again and this time it rebuilds the proper mediadatabase.db3 file. Once this succeeded, I could then add the Layer Mask.atn and .png files to the Photo Creations-->photo effects file, remove mediadatabase.db3 file, re-launch PSE6 and finally I have PSE6 up and running with the layer mask functionality. Phew! Hopefully, patsimcl will be watching this post.
Thanks for everyone's help.
Similar Messages
-
using the google highlight bar
You can open the History in the sidebar via View > Sidebar > History (Ctrl+H)<br />
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
You can find toolbar buttons to open the bookmarks and the history in the sidebar in the toolbar palette and drag them on a toolbar.
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* http://kb.mozillazine.org/Toolbar_customization -
Server app replacement not detected - how to force?
I just applied the OS X Server 4.1 (I was running 4.0.3 previously) on a 10.10.3 system. But the 'server app replace,emit detected' message has not appeared (even after 10 minutes and 1 reboot for another software update). If I launch 'Server' it still says 4.0.3 in About.
So it seems my server is in some kind of limbo state with a pending server update. How can I force it to recognise the new server app and start the normal migration process?
ChrisHi Chris,
Put the current server.app in the trash, reboot and download the new server.app 4.1 from your app store recent purchases.
Trashing the app might already give you a replacement message.
That should do the trick.
Goodluck
Jeffrey -
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i
If you are missing using google maps - try the Nokia map app called "here"
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."
If you are missing using google maps - try the Nokia map app called "here"
-
I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?
Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences -
Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
RahulHi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners -
How to create credit note automatically after PGR?
Hello SD Gurus,
Client's Business Process: Return Order (ZRE, ZPOR, ZARE, and ZMTR) is created with reference to billing document number and item category used for this order type is REN or ZREN. After the order is created, they do PGR (Return Delivery Type is LR) and then credit memo is created "manually". So, the issue with this process is that it is very time consuming and a lot of manual intervention is required.
To-be Process: The requirement is to create credit note "automatically" after the PGR is done to reduce the manual intervention and expedite the process. If item category is REN, then credit note will be created with invoice value. If item category is ZREN, then credit note will be created with Zero Value.
How should I write code in the user exit MV50AFZ1?
Regards,
Mohammed AnwarHi
Apart from Lakshmipathi's suggestion you can share the below logic with your ABAPER. There are two BAPIs we use to create billing automatically. Check whether you can call these BAPIs in userexit you have mentioned in your post.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
* EXPORTING
* CREATORDATAIN =
* TESTRUN =
* POSTING =
TABLES
billingdatain = billingdatain
conditiondatain = conditiondatain
* CCARDDATAIN =
* TEXTDATAIN =
* ERRORS =
return = return3
success = success
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
READ TABLE return3 WITH KEY type = 'E'.
IF sy-subrc = 0.
record-inv_rem = return3-message.
ENDIF.
WAIT UP TO 2 SECONDS.
* READ TABLE return3 WITH KEY type = 'E'.
* IF return3-type = 'E'.
* WRITE:/ return3-message.
* ENDIF.
READ TABLE success INDEX 1.
CLEAR: vbeln_vf.
vbeln_vf = success-bill_doc.
ENDIF.
Thank$ -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manuallyOnce you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.
shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it? -
I have a 17" macbook pro and since I installed the Yosemite OS, my laptop does not automatically find my wifi. I have to manually click on the signal icon and select my wifi network. Does anyone know how to correct this problem? Thanks in advance!
Dominic,
Thanks for the info and yes, it worked!
Best,
Chris -
I have had my I phone 4 for almost a year now. I am not sure how to sync my phone to the Computer to save my contents and how to update my phone. Do I just connect my phone to the Computer and it will automatically update and save or is there a step by step to complete?
You should have beeen syncing regularly.
iPhone User Guide (For iOS 5.1 Software) -
how do i manually get my iphone to show as a device in itunes if its not automatic when i connected it to my usb
Assuming your iTunes is open, as the article you attached suggests, make sure you're running the latest version of iTunes, which is currently version 11.0.1.
-
Adobe did not automaticly attach itself to a tab in my microsoft programs durnig the instal. Can anyone tell me how to manualy get Adobe acrobat 10 to create an Adobe tab in my Microsoft programs? IE:Outlook, Word, Excel??
Thank you for your response. Yes I do have office 2013 and From reading forums it appears I might be out of luck to get the add in tab. I can still print to it so I will adapt and move on.
Again thanks for your help.
Maybe you are looking for
-
Replace colors on multiply layer with predefined color
Hello, This is my first time here and I've tried to find an answer to my question but haven't been able to. Maybe someone can help me whith this. My process: I scann my artwork (linedrawing) I color my artwork with multiply mode on different layers (
-
What is it that we acheive by connecting an r/3 system using the UM configuration in the system configuration Is it necessary that we , prior to mapping users in a portal to that in r/3, do the UM configuration?
-
Consuming extra mouse drag events?
Hi, In my mouse drag listener, there is a bit heavy processing that can take slightly long time (doing some real time computation). If I move the mouse fast, then there would be a long pause before processing catch up. So my question is that if it is
-
Error 0xc18a0001 on my C7250 printer. I've unplugged and replaced printer cartriges.
Error 0xc18a0001 on my C7250 printer. I've unplugged and replaced printer cartriges.
-
How Do I register a complaint against the terrible Adobe Customer Service Chat line
I waited for over an hour and a half to speak to an expert this morning about a problem I have with my newly purchased Light Room 5bought and installed 2 days ago. I can't get the Plug in manager to work without the Add buttom shutting down the applc