Receive errors on my sparc 2.6 running Iplanet 4.1sp9.

Aborting JVM
Exiting JVM due to: jvm_abort () and jvm.exitOnAbort > 0
"Unable to initialize NLS property bundle (res/cjava)"
"sjava resource bundle not found - using default: java.util.MissingResourceException: Can't find resource for base name res.sjava, locale en"
"Exiting JVM due to: jvm_abort () and jvm.exitOnAbort > 0"
What do they mean? Thanks.

Take a look here http://knowledgebase.iplanet.com/ikb/kb/articles/4337.html

Similar Messages

  • Receiving error code 0x8002006E on new iMac running 10.7.2

    Receiving error code 0x8002006E on new iMac running 10.7.2.  Have seen threads form 2008 on laptops with error but with no solutions.  Any suggestions?

    Thanks for the suggestion. The AppleCare technician had me try an SMC Reset and it corrected the problem. There is information in this inthe article below.
    http://support.apple.com/kb/HT3964?viewlocale=en_US

  • Receiving error in BPC Data Manager while running Export package.

    We are in a multi server environment and receiving below error message while running Export package.
    Have anyone seen below error message in BPC 5.1
    An error occurred while executing a package.
    Package Error Events:
    ErrorCode = -1073668060
    Source = Dump Data
    SubComponent=
    Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
    IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC}
    Thanks
    Sridhar

    Below are our BPC versions:
    BPC on Server Manager: 5.0.486
    Data Manager from eData: 5.0.484
    BPC from eTool: 5.0.486
    Below is the total error message as per your suggestion to run Export package. (even with service account which we used to install the software we are getting same error message.)
    TOTAL STEPS  2
    1. Dump Data:     Failed  in 0 sec.
    [Selection]
    FILE=\ApShell_SK\FINANCE\DataManager\DataFiles\SKTEST.TXT
    TRANSFORMATION=\ApShell_SK\FINANCE\DataManager\TransformationFiles\System Files\Export.xls
    MEASURENAME=PERIODIC
    (Member Selection)
    Category: ACTUAL
    Time: 2006.JAN
    Entity:
    Account:
    DataSrc:
    IntCo:
    RptCurrency: 
    [Messages]
    An error occurred while executing a package.
    Package Error Events:
    ErrorCode = -1073668060
    Source = Dump Data
    SubComponent=
    Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
    IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC}

  • I cannot connect to the iTunes Store.  I receive Error Code -1202.  This problem began yesterday.  I have been successfully connecting to the store for months on this PC.  I am running Windows 7 and the Windows Security Center.  Thanks for any help

    TS1368 I cannot connect to the iTunes Store.  I receive Error Code -1202.  This problem began yesterday.  I have been successfully connecting to the store for months on this PC.  I am running Windows 7 and the Windows Security Center.  Thanks for any help.

    Hello alankilner,
    And welcome to Apple Discussions!
    Using Proxy: Yes
    Try temporarily disabling this setting by following the steps outlined in this Apple support document.
    http://support.apple.com/kb/TS1490
    B-rock

  • I'm running iTunes 11.0.5.6 on Windows 8.  When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed."  What do I need to do?

    I'm running iTunes 11.0.5.6 on Windows 8.  When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed."  What do I need to do?

    Perhaps this can be of help:
    http://support.apple.com/kb/TS3704
    It fixed the problem for this DukeHutchens in this thread:
    https://discussions.apple.com/thread/3916663?start=0&tstart=0

  • Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Hi Doug Talbott,
    Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
    Regards,
    Rahul Tyagi

  • When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

    When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

    Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Receiving Error Message when running sh rep_populate.sh

    Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
    Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
    THIS PROGRAM IS DEPRECATED!
    You should be generating xml metadata instead.
    Please see http://linux.duke.edu/metadata
    After executing following instructions and replacing server name with our server name.smmj.com
    Client Setup
    1. Import the GPG key
    rpm --import /usr/share/rhn/RPM-GPG-KEY
    2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
    up2date default
    to
    #up2date default
    and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
    Enterprise Linux 5
    (commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
    (commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
    #yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
    #yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
    #yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
    #yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
    #yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
    #yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
    #yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
    #yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
    #yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
    and running additional instructions
    2. Run up2date to install python-urlgrabber.
    up2date -i python-urlgrabber
    Receiving following error
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
    is called public-yum-el5.repo
    Made following changes in that file
    Enterprise Linux 5
    [el5_latest]
    name=Enterprise Linux $releasever - $basearch - latest
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
    gpgcheck=1
    enabled=1
    [el5_addons]
    name=Enterprise Linux $releasever - $basearch - addons
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
    gpgcheck=1
    enabled=0
    [el5_oracle]
    name=Enterprise Linux $releasever - $basearch - oracle
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_base]
    name=Enterprise Linux $releasever GA - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_base]
    name=Enterprise Linux $releasever U1 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_base]
    name=Enterprise Linux $releasever U2 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_base]
    name=Enterprise Linux $releasever U3 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_patch]
    name=Enterprise Linux $releasever GA - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_patch]
    name=Enterprise Linux $releasever U1 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_patch]
    name=Enterprise Linux $releasever U2 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_patch]
    name=Enterprise Linux $releasever U3 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
    gpgcheck=1
    enabled=0
    Then ran following commands
    up2date -u
    Output
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    yum update
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
    We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
    Thanks, for your help

    We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
    Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
    When we go to System, Administration, Server Settings, Services, Samba is also not there.
    Nowhere can we find an easy way of installing samba on this Linux OS.
    I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
    I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
    I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
    This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

  • Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

    I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

    Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
    First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
    Other downloads

  • When I run csreource with -b option, I m receiving error

    when I run csreource with -m option, I m receiving error. If I remove -b option, it works fine.
    ./csresource -b o=People, ou=test.calendar.com,o=cp -m [email protected] -c test create test123
    Could not find calmaster
    Unable to create resource calendar, aborting
    Let me know what wrong I am doing. Calendar server is on Linux and Version is: 2005Q4

    navvith wrote:
    when I run csreource with -m option, I m receiving error. If I remove -b option, it works fine.
    ./csresource -b o=People, ou=test.calendar.com,o=cp -m [email protected] -c test create test123
    Try the above command with quotes e.g.
    ./csresource -b "o=People,ou=test.calendar.com,o=cp" -m [email protected] -c test create test123Regards,
    Shane.

  • I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB.   lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

    I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB.   lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?  I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents"  I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Send error. -9107 and receive error. -9109

    hello *,
    i am trying to get the sample apps. work.
    i have installed oDbSrv.9i, m-Srv + mdk and mobile Client(win32 native) on the same machine.
    i installed the samples by using the script.
    each time i am trying to sync with msync.exe i am recieving one of the following errors:
    send error. -9107 or receive error. -9109
    i am using the following sync-infos:
    user jane
    pwd jane
    srv. <http://myMachine>
    i installed another client (webtogo) on another machine.
    everthing works fine until i want to sync.
    the message reference says i have to look for bad communication to the mobilesrv..
    i can ping, i can run setup, i can login.
    even when i am starting to sync from the webtogoclient the clock which tells me the connecting to server state says done!
    but in the next step (sync app-data) the noted errors occures.
    can anybody give me a solution for this issue?
    thx

    We have seen this problem before and it is most likely because you installed MDK, Mobile Client and Mobile Server on the same machine. Install Mobile Server and MDK on one machine A and Mobile Client on another machine B.

  • Receive error message, The iPod cannot be synced.  The required disk cannot be found.  iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

    Receive error message, "The iPod cannot be synced.  The required disk cannot be found.  This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7.  This is getting frustrating.  I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once.  I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod.  I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad.  This is the only device that has this issue.

    I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
    Re: 30gb 5th gen. Probs syncing.
    Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
    Try running a disk check out the iPod using the tools provided by windows.
    To do this:
    1. Plug in your iPod and close iTunes.
    2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
    3. Go to the Tools tab. Under "Error Checking", click Check Now.
    4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
    The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
    B-rock

  • Can't install quicktime or itunes I recieve error code 2738.  I'm running windows Vista 32 with Service Pack 2.  I have tried old and new version of both programs.  Also, have gone through Apple's online help with no good outcome

    Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads.  I'm running Window Vista with Service Pack 2.  I have check for all window update.  I have gone through Apple itune help list.  Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
    Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

  • I keep receiving error -24 when installing adobe air on my tablet

    I have been trying for months to install adobe air on my samsung galaxy tab 3, but constantly receive error -24. I need this to run some of my apps, so this is frustrating. I've tried emailing the Adobe android team via Google play, but the email was returned as "so such user". Any ideas how to solve this issue?

    AIR on Intel based tablets is not supported, Re: Air on Android 4.0.4 Error

Maybe you are looking for