Send error. -9107 and receive error. -9109

hello *,
i am trying to get the sample apps. work.
i have installed oDbSrv.9i, m-Srv + mdk and mobile Client(win32 native) on the same machine.
i installed the samples by using the script.
each time i am trying to sync with msync.exe i am recieving one of the following errors:
send error. -9107 or receive error. -9109
i am using the following sync-infos:
user jane
pwd jane
srv. <http://myMachine>
i installed another client (webtogo) on another machine.
everthing works fine until i want to sync.
the message reference says i have to look for bad communication to the mobilesrv..
i can ping, i can run setup, i can login.
even when i am starting to sync from the webtogoclient the clock which tells me the connecting to server state says done!
but in the next step (sync app-data) the noted errors occures.
can anybody give me a solution for this issue?
thx

We have seen this problem before and it is most likely because you installed MDK, Mobile Client and Mobile Server on the same machine. Install Mobile Server and MDK on one machine A and Mobile Client on another machine B.

Similar Messages

HT204161 I want to use iCloud for every thing else except for Messages. I do not want to send an iMessage and receive it on both my iPhone and Mac.

I want to use iCloud for every thing else except for Messages. I do not want to send an iMessage and receive it on both my iPhone and Mac.
How do I do that?

Howdy kingtonz,
If I understand you correctly, you want to limit to limit your use of the Messages application to non-iCloud sources such as text messaging through your phone carrier, is that right?
You can turn off the use of iMessages in Settings > Messages > iMessage. See this help article -
Messages settings - iPhone
Thanks for using Apple Support Communities.
Best,
Brett L

ABAP proxy client sending to XI and Receive the data back from the DB

Hi
I am new to XI need a clarification on the following scenario
I have a scenarion where ABAP Proxy (Clinet) from ECC will be sending the data to Data base server via XI, and needs to return the values back to ECC
ECC -
> XI/PI -
> Remote server (Database)
<-- XI/PI <--
Can anyone give idea how can I develop this scenario.
I am sure I would be using the Proxy BADI to send the data from ECC to XI in Asyscrounous mode,
Thanks
PR

Hi,
As you said the data will be sent asynchronously from BAPI to XI which means you will have to split up the scenario into two.
First One -
Sender Proxy - XI - Receiver JDBC.
Second -
Sender JDBC - XI - Receiver Proxy.
You can set a flag to"1" when you insert data into table. the run a query on the database which will fetch record whose flay is set to "1" and also simultaneously rest the flag to "0" to indicate that this record is already send to SAP.You can make use of stored procedures too.
Please award points if the reply is useful.
Regards,
Pragati

Sender as File and receiver as WebService

I have following scenrio to work on but not sure how to do it.Any help on this is greatly apperciated.
I have sender which can post file to XI asynchronously and webService which can process it on the receiving it synchronously.
Is there any way to communicate between asynchronus and synhcronous interfaces.
Thanks,
Samir

Hi Samir, let me try to list down the i/f to be created to acheive ur scenario.
1)u need 1 abstract async i/f to receive the async message from file adapter
2)u need 2 abstract async i/f , one is the request message of the web service & other is the response message of the web service
3)U need 1 abstract sync i/f to be referenced in the send step of ccBPM.
Now, create 3 cotainers in ur BPM process for i/f created in step 1 & 2 above, and u shud now ve an sync-sync bridge mechanism in place.
-Saravana

Iphone 4 16gb on verizon is sending blank texts and receiving symbols instead of letters from only certain people

so i have had an iphone for a year ish and recently replaced it. on both phones from my boyfriend and my grandma (the only ones who have had this problem) i will receive their texts as a bunch of random symbols or gibberish every so often and again every once in a while i will text them a message and it will be blank so i send it again but change the words a little just in case but it still sends blank messages. im tired of this problem and i have no idea how to fix it. any ideas? ive tried turning off the mms messaging and turning it back on, but it still keeps happening. i think it might be a carrier problem??? all three of us are on Verizon. but im not sure.

Have you tried to factory reset/restore your phone? May be also worth checking all the text carrier settings are correct such as message centre number.

TS3276 I am new using a mac product,let alone one which will allow me to sync all my email addresses. Why is is I can send normal email and receive normal email but when I try to forward an email as an attachment it never goes through.?

I am new to Macbook. I have my email accounts synced; I can received and send all email, but cannot seem to forward an email or attachment, whats the problem? Connection Doc says I am all hooked up.

Change the email on the old account to another new, current email address.
An email address can only be linked to one Apple ID.
It is possible to have content from multiple Apple ID's on a single iDevice.

Help required for Sender Proxy/RFC and Receiver RFC approach. Urgent please

Hi All,
I have one sender R/3 system
I have two receivers R/3 systems
Business Partners data from sender R/3 system needs to be repliacted to 2 receivers R/3 systems
From sender R/3 system one Sync Abap Client Proxy or
Sync RFC will send Business Partners data to XI.
For both receivers R/3 systems there is only one RFC Currently there is no flag condition for 2 receivers as this is
Business Partner replication scenario.
Also In XI there is restriction that multiple sync receivers cannot be there.
Please let me know how to make this approach.
Regards

Rich,
Create two O/B Interfaces - Synch. Create Proxy1 for O/B Interface1 , Proxy2 for O/B interface 2.
So while defining Receiver determinatio, you will define as following,
Receiver Determination----1
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 1 ( i.e Proxy1)
Receiver : BusinessSystem_ C
Interace Determination
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 1 ( i.e Proxy1)
Inbound Interface: RFC_Rec
Receiver Determination----2
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 2 ( i.e Proxy2)
Receiver : BusinessSystem_D
Interace Determination
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 2 ( i.e Proxy2)
Inbound Interface: RFC_Rec
Hope it helps!
raj.

I cannot send e-mail and receive only a few of the incoming e-mails.

I'm using a pop server. Worked fine until yesterday. Had a G drive installed on Sunday to back-up all my files. Don't know if it effected the e-mail.

Hello, and welcome to the Discussions.
Please summarize how you are performing the backup, and whether any software came with the G-Drive for doing this? It there is such software, does it analyze files for changes, and only add the changes to the backup, or does it replace in a wholesale fashion?
Have you checked the Mail Preferences/Accounts/Account Information/Outgoing server settings to see if the name of the selected SMTP is correct?
More info, please.
Ernie

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Problem with Stored Procedure exection in Sender and Receiver side of JDBC

Hi All,
I am facing problem while executing Stored Procedures using sender and receiver sides of JDBC adapter.
Here is my SP in Oracle DB :
PROCEDURE EMP
( ID IN VARCHAR2,NAME IN VARCHAR2,PROCESSED IN VARCHAR2 ) AS
BEGIN
   INSERT INTO EMPLOYEE VALUES (ID, NAME, PROCESSED);COMMIT;END EMP;
Now I want to execute this SP using sender JDBC channel and receiver JDBC channel.
Can anyone please help me executing this SP?
Regards,
Soorya

Hi Soorya,
The receiver Data type should be like this:
<StatementName>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName>
Check the link http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Which DB are you using?? The sender structure will be like
<resultset>
<row>
<field1></field1>
<field2></field2>
<field3></ field3>
</row>
</resultset>
Search SDN you will get lot of examples
Regards
Suraj

IMessages on Mavericks will send and receive but will not show my sent messages

So last week I was on ML and signed into iMessages app. I was able to log in and it showed my number and email and everyone's iMessage indicator worked fine. The issue was that I couldn't send any messages out. After typing my message to someone and pressing enter it would dissapear and they would never get the messages. So after hours of browsing I just figured maybe going to Mavericks would help solve the issue. Upgraded and logged into iMessages and to my dismay, it now will send the messages and receive messages and will sync with my iphone but I still can NOT see the messages I send out. After pressing enter they disappear. I've pretty much given up but hope someone in the community will help. I'm pretty bright with Mac and tried a PRAM reset, I've enabled and disabled, logged in and out, shutdown and restart, went into library and erased preferences, but nothing. My whole day is behind a computer and I love iMessages... When it works lol. Plz help. Thank you. I'll assume Ralph will take a gander since he is the pro on here from what I saw. Thanks everyone.

Hello??? BUMP** AGAIN!!!

Is there a way to communicate with a GPIB device and receive the response?

Does anyone know if there's a function that I can use to issue a command to an instrument such as a query on its status and receive its response. I've tried GPIB Write, but it just writes the command and doesn't receive the automatic response. If I use a GPIB Read right after the GPIB Write, it doesn't work! I think I'm looking for a function that sends the command to the GPIB device and then waits for the response and is capable of outputing it. Thanks for any help!
- Jon

I know what commands to send, I just don't know what function or vi or whatever in LabView to use in order to receive the response right after I send the command. For instance, I want to know what count the counter is currently on, and so I send the command "NN" to the counter, which tells me what count it's currently counting on. I can send the command, I just don't know how to retrieve the information of what count it's on because I don't know how to send a command and receive the response that the counter is prompted to send immediately after. Thanks for the help though!
- Jon

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Sending error msgs through email and sms

Hi,
does anyone done on sending error msg file through email and sms.
if so share some knowledge with me.
thanks in advance

Hi
MAIL:
SORT t_receivers BY receiver.
DELETE ADJACENT DUPLICATES FROM t_receivers COMPARING receiver.
IF NOT t_receivers[] IS INITIAL.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              document_data              = wal_docdata
              put_in_outbox              = c_check
         TABLES
              packing_list               = t_objpack
              contents_txt               = t_content_txt
              receivers                  = t_receivers
         EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              OTHERS                     = 8.
SMS: refer to this Weblog in SDN.
<a href="/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap Post for SMS prog</a>
Hope This Helps
Anirban

I am unable to send error reports to Apple or receive software updates

I am unable to send error reports to Apple or receive software updates. Does anyone know why this might be the case?

If you're running Mac OS X 10.5.8 as your profile says, there will almost certainly never be any more software updates, and there's no point in submitting bug reports because the bugs will never be fixed.

Send error. -9107 and receive error. -9109

Similar Messages

Maybe you are looking for