Receive Original Email Whenever I Reply to an Email Using Microsoft Outlook Exchange Server

This is a problem I've seen other people post about, but I haven't found a solution.  Whenever I reply to an email using Microsoft Outlook 2007 with Exchange Server on my computer, I receive a copy of the original email (not the reply, but the original email that I replied to) on my Curve.  My BB email is set up with BIS and my carrier is Verizon, but I've seen people post about this with other carriers.
Apparently there is some kind of incompatibility between Microsoft Exchange Server and BIS that is causing this problem.
This is a huge pain, because everytime I reply to an email, I have to delete a copy of the original email on my blackberry. 
Does anyone know the solution to this?

Under "tools", "Options" , "applications" on my computer there isn't a "mailto". so these instructions don't work. Any other ideas?

Similar Messages

  • Email problem - Microsoft Outlook exchange

    Hi,
    I was trying to sync my email, which is provided by Microsoft Outlook Exchange on the website icex.ic.ac.uk with my BB. However, I was having issues. 
    Interestingly, when I first set up my BB this email worked, at that stage I entered my email details but I did not setup an account in email setup. Then when I chose to setup an account one day, and then within the account setup all my emails it stopped working! Now I cannot find a way of accessing my emails without having an account, so is there a way of going back to the old setup...?
    Thank you

    Hi and Welcome to the Forums!
    It sounds as if you created BIS account credentials -- your BIS account already existed (hosted and controlled by your carrier) and, when only accessing from the BB, credentials are not needed as authentication occurs via PIN. But, to access your BIS account from a PC/browser, credentials are needed as there's no other way to authenticate you to the account. Once you create those BIS credentials, you must use them both from a PC/browser as well as from the device -- but the device should have a tickbox to check that will let it remember your credentials.
    If you don't have it, to get to your BIS account via PC/Browser (using those credentials you created), look here:
    http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
    Managing your BIS account from the PC/browser or from the BB is the same thing...it's just two interfaces to the same account. Once you create credentials, you must then forever use them. And credentials are required to access from a PC/browser. Personally, I hardly ever use the device interface to BIS...I much prefer the larger screen, keyboard, etc. of my PC to manage my BIS conduits.
    If you want to remove the credentials, you'll need to contact your carrier to completely reset your BIS account back to an initial state.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPhone now sends emails using the wrong Exchange server

    I have 2 ActiveSync exchange accounts setup on my iPhone 4S, Gmail and Hotmail.  I have had this setup for awhile, and all of a sudden messages sent with a from: address of gmail.com is being sent by Hotmail.  The message appears in my Hotmail outbox, and headers reveal that it is being sent from hotmail on behalf of gmail.  This was never a problem in the past.  The default account is set to Gmail, and there is no SMTP account since it is Exchange-based.
    Thanks.

    I have the exact same issue reported here.  I have deleted all my mail account and re-added them.  The problem persists.  It does not seem to matter in what order I add the accounts, the messages always are sent from the live.com Exchange account, even if the message shows it is being sent from my work email.  If I delete the live.com account, things work just fine, but as soon as I add it back in, all mail routes through it.  I can see messages that should have been sent through my work Exchange server in the sent items on live.com.  This seems like a very bad bug in IOS...

  • API to Fetch email using SMTP from EXCHANGE server.

    Hi There,
    We have a customer requirement to fetch e-mails from his EXCHANGE server using SMTP. Our application currently supports fetching e-mail using POP, IMAP.
    POP and IMAP is disabled in customer environment and there is no way enable them to fetch e-mails.
    Please help me to solve this problem by pointing to some APIs available or code.
    I searched but not able to find a solution for this.
    Thanks in advance.
    Regards,
    Krish.

    SMTP is generally, almost strictly used for sending mail not fetching.
    I understand that they may not be able to use IMAP or POP, as some rented Exchange services block IMAP,POP services so they can ensure the client is sticking to the Exchange product line etc.
    Perhaps you could find a Exchange library for Java? im sure there is one about. There are OpenSource solutions for exchange out there as Linux applications like evolution can communicate with Exchange. I beilve the protocol used in Exchange is MAPI? (or SAPI?)
    Another solution would be to just use the clients mail client to export the emails to a more portable format (MBOX? or a folder of EMS files) then import them into Java using InputStreams on the files?
    Or, Get an opensource Exchange compatible server software, eGroupware springs to mind, set that up as a proxy or a go-between. set it up to retrieve mail from the Exchange server and enable its POP and IMAP functions and retrieve the mail from it.
    Either way Im near 100% certain SMTP is not for fetching mail.

  • TS3899 I was on ios 6.1. and i received a email from Microsoft outlook saying "Your phone won't be able to synchronize with the server via Exchange ActiveSync because of an access policy defined on the server."

    However i have now updated to the latest ios 7.0.2, and i am still unable to synchronize with the server via Exchange ActiveSync.
    Please advice.

    i did, and the tech cust. service rep. told me to contact Apple

  • Microsoft Outlook Exchange / Canon Multi function Printer Email Issue

    Hi there
    A client of ours has been experiencing strange issues with one particular email address on their Microsoft Outlook Exchange Server and a Canon Imagerunner 1133if
    The Canon scanning feature has been registered with all the computers and email addresses on their network. Whenever one of the employees scan a page to their email address, the email is sent and received with no problem whatsoever via Outlook 2010 Exchange,
    running from the exchange server.
    Only one email address on their exchange server doesn't receive any of the scans sent to it, even if it did sent successfully??
    1. The email has been set-up correctly on the Canon and Exchange server (The email address syncs new emails and sends them without any hassle, but scanning to the said email, for eg. [email protected], won't show up in their inbox). 
    Note: We have checked the email on the canon printer and it has been registered correctly.
    2. We have whitelisted ([email protected]) the email on the client's computer, made sure it's not a blocked sender in junk email, checked the exchange email tracking logs, and everything checks out, according to the log the email has been sent successfully,
    but for some reason, the email doesn't receive on his personal exchange inbox...all other emails sent to this inbox receives perfectly.
    Neither the Canon Printer techs, nor we, can find the issue. If anyone has experienced this particular problem, with this particular printer or setup, please respond, it will be MUCH appreciated.
    Kind regards

    I've heard many cases that user unable to scan to Email from Canon Scanner/Printer via Exchange Server. However, in this case, only one email address doesn't receive the scan items from the device, it seems to be none of business of IP/SMTP Port/DNS
    or network else, I mean the server site due to the other user is ok. This following factors might be the root:
    1. Email address itself. If necessary, please type the exact address through Canon Imagerunner 1133if and send one thing to the target email address to check the result.
    2. Permission. Check and enable the Anonymous Group on Receive Connector somewhere.
    3. The user's client. Disable all of security application in that user's computer, or logon this account in another machine to test the behavior.
    If none of steps above works, please create a new user in AD and then check everything is fine for a new createing user account. Thanks.
    Tony Chen
    TechNet Community Support

  • How can I set up a "receive only" email account in Outlook 2010

    I have an Outlook 2010 email account that receives emails from a "Fax-to email" service, and I'd like to make that accout "Receive Only".  Is it possible to do that, and if so, how.
    Capt. Dinosaur

    Hi
    As per the information and details provided by you, to set up a
    “Receive Only”email account in Outlook 2010, please follow these steps: -
    You have a few options available to you. You can set up the account with
    a fake SMTP server name and configure the Send/Receive group to not send mail from this account, or you can use a different, valid account for the Outgoing server, just in case you accidentally use the wrong account when you compose a message.
    First, create the account in Outlook: -
    Fill the name and address fields with the desired information. Select
    POP3 account type and enter the incoming server name.
    In the Outgoing server field, type
    nomail.
    Enter the correct username and password for the incoming mail account.
    If you want to verify the incoming server is correctly configured, click on
    Test Account Settings, and then choose the dialog after the incoming server is verified.
    Deselect the option to
    Automatically test account settings when the Next is clicked.
    Click on the
    Finish to return to Outlook.
    Because Outlook will error on every manual send and receive when it can not find the outgoing server error, you need to change the
    Send and Receive Settings for this account.
    Press
    Ctrl+Alt+A to open the Send/Receive Settings dialog. (or you can go to
    Send/Receive tab, Send/Receive Groups and select Define Send/Receive Groups.
    Click the
    Edit button.
    Select the receive-only account, then deselect
    Send Mail Items.
    Click on the
    OK, then Close to return to Outlook.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • IPhone will not display old emails in saved Outlook/Exchange folders

    I have a second generation iPhone with the newest iPhone software. At work we use Microsoft Outlook for emails and my IT friend had previously set up my iPhone to send and receive Outlook emails. I could also access and read/forward/delete old emails that I save in various folders for reference. When Exchange became available he set up my iPhone to use Outlook using Exchange and deleted my old Outlook email account. Now I can see all the folders that have saved emails in them on my desktop computer, but the iPhone will not display any of these old saved emails prior to when he switched me over to Exchange. Is there anything I can do to get these emails back so I can refer to them on my iPhone?

    Allan, thanks for that reply. I should have mentioned that I tried to reset that feature under SETTINGS, in which I tried the 1 month and even the NO LIMIT option, but I still can't get the old emailed in those saved items folders to display.

  • Error while sending email using TemplateEmailSender in CSC server

    Hi,
    We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
    Any pointers would be helpful.
    Below is the error.
    Error while sending email
    java.lang.NullPointerException
            at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
            at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
            at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
            at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
            at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
            at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
            at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
            at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
            at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
            at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
            at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
            at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
            at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
            at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
            at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
            at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
            at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
            at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)

    Thanks for the reply.
    My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
    I did not touch ProfiledMessageSource as its required for session triggering.

  • Can you use microsoft outlook express 6 email on a mac

    how do you use microsoft outlook express 6 email on a mac

    You cannot use Outlook Express email client on Mac OS.
    You can install Windows on Mac but it seems like overkill to get your email going.
    Can you let me know what you want to achieve?
    You should really ise Mail programwhich is native to Apple.
    TZ

  • I need to export many emails from Microsoft Outlook to a PDF, is there a plug in i need to install? Please note I use a mac...thanks!

    I need to export many emails from Microsoft Outlook to a PDF, is there a plug in i need to install? Please note I use a mac...thanks!

    Hi kellyo68596735,
    That capability is a function of PDFMaker, which is currently only available on Windows.
    Best,
    Sara

  • PDFmaker not converting Jpg attachments to emails in Microsoft Outlook 2013

    I am having problems converting jpg attachments to emails in Microsoft Outlook 2013 using PDFmaker. I'm running Adobe Acrobat 11 and just updated it to the latest version and that did not solve the problem.
    I can convert the emails and Word attachments and can convert the jpgs manually by saving them to my desk top and then adding them as attachments to the resulting PDF but I have several emails each was several attachments that I want to save and it will take me hours to do it manually.
    I was thinking there might be some security setting on the jpgs that is preventing PDFmaker from automatically converting them.
    I already confirmed that the Preference Conversion Setting is selected to include all attachments in the Adobe PDF. I also unselected the box that reads "block download of external content" but it did not help.

    Manual method is a difficult task .You can easily transfer your mails from the Thunderbird to MS Outlook using third party conversion software.i faced the same problem.i tried the following utility. It converts all my Thunderbird accounts to a single PST.you can also try the free demo version of the software.
    http://www.datacarelab.com/software-for-mbox-to-outlook.php

  • Paying bills online... can't complete the payment using email via TDS, but it worked when I used Microsoft Outlook as my email client???

    to pay a bill via email, I download the pdf sent to me and am prompted to enter a security code. Everything works on the form, but the adobe does not allow me to select the year 2014 to complete the payment... using my TDS email. I had been using Microsoft Outlook for my email in the past and the download worked perfectly. my utility company told me to upgrade to Adobe 7... my Adobe version is XI

    fwiw - sorta sounds like an email program problem.
    Be well...

  • HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

    Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

    The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
    #Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
    #Disable all plugins
    #Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • How can I import my archived emails from Microsoft outlook to my MAC Book Pro using MAC OS?

    How can I import my archived emails from Microsoft outlook to my MAC Book Pro using MAC OS?

    Do you have contacts turned on using the iCloud control panel in Windows control panel?

Maybe you are looking for