Received message without correlationID

Hi,
I am facing a strange problem.
Whenever I execute any JPD in my weblogic workshop using the Workshop test browser, I am getting following error.
<Error> <WLW> <000000> <Received message without
correlationID. MessageID=ID:P<294710.1177353184648.0>>
1. I created a JPD which has a Client Request Node and uses some WLI JMS controls to post messages to a queue.
When I run this JPD from test browser, I am getting the above error.
2. Then I created another simple JPD with just one single perform node. Even that gives the same error.
3. Then I thought it may be a problem with my domain and created a fresh wli domain and tested the JPD. Still the same error.
I do not understand what could be the problem.
Can someone help me with this.
Thanks

This is a problem with the configuration of your JMS control. For me it worked when I stripped the @jc:jms annotations from the send/receive methods of my JMS control. Following is the code:
package processes;
import com.bea.control.*;
import java.io.Serializable;
* @jc:jms receive-type="queue" receive-jndi-name="TestQ" send-type="queue" send-jndi-name="TestQ"
* connection-factory-jndi-name="weblogic.jws.jms.QueueConnectionFactory"
public interface MyJms extends JMSControl,com.bea.control.ControlExtension
* this method will send a javax.jms.TextMessage to send-jndi-name
public void sendTextMessage(String payload);
static final long serialVersionUID = 1L;
interface Callback extends JMSControl.Callback
void pickMessage(String message);
Message was edited by sodhi at Jan 29, 2005 2:56 PM

Similar Messages

I'm having issues with iMessage. It works fine on wifi and I receive messages as iMessage without issue in network or wifi. However as I send a message it starts as iMessage then says not delivered. Then sends as SMS since I have it enabled.

iMessage works on wifi without issue. However I receive messages on network but can't send. I send a message it starts sending as iMessage ten says it can't send. Then starts to send as SMS since it's enabled. I have reset network sertings, updated to ios7, etc and done about 3 othe suggested in order resets to get it to work and it still hasn't started working when I'm not on wifi. Any suggestions?
It's a iPhone 4S. I have two iPhones. One setup to receive iMessage just to its phone number. Therapeutic to receive to its phone and email. I wouldn't think that would be the issue as all 3 are separate. Bone the same going to both phones.
Thanks for the help!!!

Hello there, pacotechguy.
The following Knoweldge Base article provides great in-depth steps for troubleshooting your issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for reaching out to Apple SUpport Communities.
Cheers,
Pedro.

How to receive message asynchronously without dequeueing it

Hello, guys.
I use code like this to create asynchonous receiver in weblogic 9.2:
session=qcon.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
MessageConsumer mc = session.createConsumer(dest);
mc.setMessageListener(new MyMessageListener());
class MyMessageListener{
public void onMessage(Message m){
//some code here
} And AUTO_ACKNOWLEDGE means that server removes message from queue when onMessage() returns.
I want to leave messages in queue. I do not want to delete them.
How is it possible?
thanks,
Vyacheslav Gonakhchyan
Edited by: prng on Jan 19, 2009 12:15 PM

I don't use WebLogic, but I guess you are in need of QueueBrowser. This performs what you need if I get your requirement right ;)
You can browse through the queue for specific messages without deleting them,

For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me. Thanks

For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me. Thanks !

Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.

Can't receive messages but I can send them to people without iphones i uses to get their messages and then i just stopped receiving them i cant even receive a message to check my data

Can't receive messages but I can send them to people without iphones i uses to get their messages and then i just stopped receiving them i cant even receive a message to check my data

Hi Tnolen15,
If you are having issues sending or receiving messages from a specific contact (in this case, your wife), you may find this portion of the following article helpful (ignore the numbering):
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Receiving messages from Service Bus Topics in node js without polling

Hi, I have node js client who subscribed to a Topic, currently I'm using a timer to invoke receiveSubscriptionMessage every few seconds to get messages from the Topic.
Is there a way to do this without polling?
Thanks.

You can implement message pump by OnMessage which will do the poll for you. Please read "How to receive messages from a queue" part from
http://azure.microsoft.com/en-us/documentation/articles/service-bus-dotnet-how-to-use-queues/

Stream.PlayFromGroup gets NetStream.Codec.Error Received H264 message without receiving AVCC sequenc

I get randomly
NetStream.Codec.Error Received H264 message without receiving AVCC sequence header first
from Stream.status
and obviously no video and sound.
any clue ?
Thanks

Received message that iTunes account was disabled without the reason provided

Received message that iTunes account was disabled; specific reason not cited

This was when you trying to download/buy something i.e. it's not a phishing email that you've received ?
You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on any iOS devices that you have by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on them.
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

"Can not get password" Can't send or receive messages all of a sudden.

Out of the blue my Thunderbird client will no longer send or receive messages.
Here's the error message I get: "Sending of message failed.
An error occurred sending mail: Could not get password for [our server name]. The message was not sent."
The only thing I can come up with that may have caused it would be that I restarted my computer due to a completely unrelated issue (Illustrator kept crashing). Shortly after that, this issue began. I'd really to resolve this without uninstalling thunderbird, I use thunderbird heavily for my job and thus everything is set up, filed, and organized the way I need it.
I've tried restarting thunderbird, restarting my computer (Mac, OSX Yosemite if that matters) and none of these things are working.
Thunderbird has worked flawlessly for the past two years up until now. No updates were installed that I know of. My password is good, I'm able to type it in on our webmail client (atmail) and log in without issue.
Thanks in advance for any help!

Go to Preferences -> Security -> Passwords -> Saved Passwords... and remove the entries for the account. Restart TB. It should ask you for your new password.
If that doesn't fix it, we need to look at your settings.

Automatic Payment Process through IDOC and Receive Message Acknowledgement and BANST file format

Hi Experts,
We are implementing payment process to our client through Idoc.
Normally the process will go like below. Once Payment Initiated --> IDoc will generate --> This Idoc process through PI system and send to Bank.--> Once payment data received bank --> it will generate acknowledgement receipt and Bansta file and send it PI system --> This PI system system again send it --> SAP system. Here I want to know the required configuration from PI system to SAP system while receiving acknowledgement and Bansta file. And let me know if u guys have steps...
Thanks,
Raviram

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

How to define message without parts in WSDL?

Hi all,
I don't know if it is possible, but I would like to create a message without defining part/type.
Really what I want to accomplish is to avoid the part definition below in my .wsdl file.
<message name="RCMR_IN000002NR01Input">
<part name="param0" type="xsd:string"/>
</message>
<message name="RCMR_IN000002NR01Output">
<part name="param0" type="xsd:string"/>
</message>
So I would like to something akind to
<message name="RCMR_IN000002NR01Input">
</message>
<message name="RCMR_IN000002NR01Output">
</message>
I try to assign a string to RCMR_IN000002NR01Input (I am using rpc literal). At the moment the partnerlink receiving my message gets confused by the param0 part of the XML.
I hope that description of my issue was not to cryptic to be understandable. Please feel free to ask clarifying questions.
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 8, 2008 8:42 AM
Maybe I should try to elaborate on my use case.
I pick up a SOAP message from a JMS queue (well, topic really). The message is a domain specific type. I get the content of the message as a string and assign it to a variable with a param0 of type string.
I then use the contains function to determine which partnerlink to invoke for a given message.
The invokation is succesful seen from BPEL.
However, the receiving systems receives my message including the original SOAP envelope - AND including a new BPEL generated SOAP envelope :-(
This is addition to the following code which was the concern of my original post:
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="param0">
<param0 xmlns="" xmlns:def="http://www.w3.org/2001/XMLSchema" xsi:type="def:string" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
So anybody have any ideas as to how to get rid of unnecessary SOAP envelope and that irritating param0?

Hi again,
Srin, you were right. I did have a namespace issue. Getting that resolved however, introduced a new error.
My BPEL process invokes the remote partner, delivers the payload, the remote partner sends back a meaningful response, but no BPEL instance is shown in the BPEL console.
In the <oracle home>/opmn/logs I find the following errors:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.lang.NullPointerException
And
Exception: java.lang.NullPointerException
Handled As: com.collaxa.cube.CubeException
+] -> [java.lang.NullPointerException: null]+
ORABPEL-00000
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.lang.NullPointerException
This seems strange to me. It seems that even if the meaningfull answer from the partner link is lost enroute I should still get a response in BPEL (maybe just null). My next step will be to try and set up a TCP Monitor between the partnerlink server and the BPEL server.
Any thoughts, hints, ideas and solutions are very welcome.
Will report on progress
Regard,
Aagaard
Edited by: Aagaard on Oct 10, 2008 10:18 AM
Update:
My current thinking is that I have a problem with my message types. The problem is definitely in the way BPEL handles the response from the partnerlink. The nullpointer exception may suggest that I am trying to assign the return payload to an incompatible type. I don't know if it could be an issue if the partnerlink response is some specific type while I excpect a string?
Anyway here's what my wsdl looks like now:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="RCMR_AR000002NR01"
targetNamespace="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.wsdl"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" >
<documentation>
WSDL for Service: CCSMessageServiceRemote, generated by Oracle WSDL toolkit (version: 1.1)
</documentation>
<types>
<schema targetNamespace="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<element name="msgInputOutput" type="xsd:string"/>
</schema>
</types>
<message name="RCMR_IN000002NR01InputOutput">
<part name="param0" element="msgInputOutput"/>
</message>
<portType name="CCSMessageServiceRemotePortType">
<operation name="RCMR_IN000002NR01">
<input message="tns:RCMR_IN000002NR01InputOutput"/>
<output message="tns:RCMR_IN000002NR01InputOutput"/>
</operation>
</portType>
<binding name="CCSMessageServiceRemoteBinding" type="tns:CCSMessageServiceRemotePortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
<operation name="RCMR_IN000002NR01">
<soap:operation soapAction="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote/RCMR_IN000002NR01"/>
<input>
<soap:body use="literal" encodingStyle="http://schemas.xmlsoap.org/soap/literal/" namespace="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote" />
</input>
<output>
<soap:body use="literal" encodingStyle="http://schemas.xmlsoap.org/soap/literal/" namespace="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote"/>
</output>
</operation>
</binding>
<service name="CCSMessageServiceRemote">
<port name="CCSMessageServiceRemotePort" binding="tns:CCSMessageServiceRemoteBinding">
<soap:address location="http://.../HL7Receive_servlet_WS/WS"/>
</port>
</service>
</definitions>
My assignment / invokation looks like this:
<assign name="CreateInputParamGenerateMessage">
<copy>
<from variable="getContentAsString"/>
<to variable="RCMR_IN000002NR01Input" part="param0"/>
</copy>
</assign>
<invoke name="InsertOperation"
partnerLink="RCMR_AR000002NR01"
portType="ns6:CCSMessageServiceRemotePortType"
operation="RCMR_IN000002NR01"
inputVariable="RCMR_IN000002NR01Input"
outputVariable="RCMR_IN000002NR01Output"/>

IPod touch - text messaging - without wifi?

I've seen this question in the archives, but nothing since 2012.
Is it possible for the latest generation iPod Touch to send text messages without a wifi connection?
Perhaps there's an app for this?
Thanks -

No, not at all. Any texting app or even emailing a text to a recipient carrier's gateway will require an internet data connection. An iPod Touch only has one single way to interact with the internet at all - that is wifi.
Without wifi and with no other form of communication built into the device, how on earth could it send any message? Magic?
There are internet-based texting apps for iPod Touches and wifi-only iPads, but those apps use an internet connection to actually send or receive anything.

B1iSN - sender and receiver message with different tesk

Hi all,
I have a question regarding the B1i.
Is it possible to have the receiver will have a different task then the sender?
My scenario is:
The user creates a Delivery note in company "a",
The B1i creates an Invoice from that Delivery Note in company "b".
now I want to update the Delivery note with the DocEntry of the created Invoice.
I copied all other fields to my receiver message.
My problem is that I want on the event of "Create Invoice" in company "b" to update a Delivery note in company "a".
I tried doing in 2 ways:
one is in the xsl file I wrote the <QueryParams> element. Then I got this error: The business object already exists
The second is without the <QueryParams> a new Invoice was created (but i wanted the existing one to be updated).
Is it possible to do this in the B1i? How?
Thanks in advance!
Chana

Hi Chana,
Did you configured the biu to "Update on Exist"??? (Guide 03 Extensibility, section 2.14)
You can have a look to the B1iSN 8.8 B12B1 Intercompany scenario in order to see how it is done (B1iSN 8.8 is already in GA). In that scenario the Subsidiary PO is updated with the number of the SO when the SO created by B1iSN in the Headquarters.
Regards,
Trinidad.

Received message without correlationID

Similar Messages

Maybe you are looking for