Receiver file adapter with attachments.

Hi
I would like to pass a file receiver an attachment from a proxy. I have seen bits and pieces with attachments. I have read that its similar to the mail adapter.
In the module
localejbs/AF_Modules/PayloadSwapBean
module configuration:
Parameter Name: swap.keyName
Parameter Value: payload-name
Has anyone succeeded and would you explain the details?
Thanks in advance
Ian

Hi,
As far as I know, receiver file adapters do not supprt attachments.
You can use the payloadSwapBean to swap the attachment and the actual proxy payload and then send it to the file adapter.
Don't think it will be possible to send both the attachment and the payload to the receiver file adapter though.
Regards
Bhavesh

Similar Messages

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

Receiver File Adapter with File content Conversion

I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.

Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

Same file name from sender to receiver file adapter with out using UDF

Hi All,
I am working on FILE TO FILE. My requirement is same file name from sender to receiver file adapter. Is it possible to do using only Adapter Specific message properties? i mean with out using UDF.
Thanks
Karthik

Hi,
>>>Is it possible to do using only Adapter Specific message properties?
yes
just enable Adapter Specific message properties in sender and receiver channel for file name
and you're done
Regards,
Michal Krawczyk

Target Directory & File Name parameters in Receiver File Adapter with ASMA

Hi Experts..
I have the following question....
What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
Thanks in advance,
Daniela

You can give any dummy value in dir and file name... Just go through these blogs
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot

How to ignore the empty file using Receiver file adapter with Coma separato

Hi,
I am trying to create the .csv file at the receiver but when there is no data I wan to ignore the file even I do not want to create the file with comma also (I just went and check in my file system created with commas)
Source1 -> T1
       T1
        -> S1
              ->Field1
              -> Field2
Because I am using receiver side FCC populating with empty node
Based on condition T1 is populating when condition fails I am populating target T1 and structure elements are mapped with constant.
Ex: Target payload when condition failed below data is populating ..
In this I want to ignore creating the file.
<T1>
<S1>
<Field1/>
<Field2/>
</S1>
</T1>
Here Is the my content conversion parameters,
S1.fieldNames - Field1,Field2
S1.fieldSeparator - ,
S1.endSeprator u2013 u2018nlu2019
I used processing tab u2018Ignoreu2019 option id did not worked. Appreciate your help.
Regards,
Venu.

Hi Raj,
   I went my receiver mapping signature tab I chagned occurance from 1 to 0..1
then my mapping got lossed now message type level I put the condition. When my condition not satisfy I am not creatin gthe target node itself.(I mean here message type) Messages ->message1 only is creating..
but in SXMB_MONI below error I am getting..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks for your response.
Regards,
Venu.

RECEIVER FILE ADAPTER FCC ERROR

Hi team
My scenario is a text file has to be picked up by PI, has to processe it and the receiver is Proxy and it has to get updated and sent back to FTP location.
i am using Sender File Adapter with FCC and Also receiver File Adapter with FCC.
Both the sender and receiver structures are same; i am using the same FCC parameters for both the sides.
in Receiver File Adapter i am getting the following errors
1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
please help me out
thank you
Edited by: vemugantivn on Aug 16, 2010 12:19 PM

Hi,
> 1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
> 2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
It is saying that you are not using the fieldSeparator parqameter.
have you provided the field separator parameter? if not then give like below
order_row.fieldSeparator : , (give what ever the separater you are using)
or
order_row.fieldSeparator : 10,5,... (if you are using fixed length)
Regards
Ramesh

Receiver file adapter creates an innecesarry extra line

Hi,
I have an issue with an extra line that add the receiver file adapter with the content conversion.
The file XML that the file adapter has to convert, is the next;
<root>
<cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
</root>
Because FileName is not necessary, I remove it with:
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
but it leaves an empty line that i don't want. that is, the text in the file start in the second line.
Any help?
Thank you in advance.

Can you do a small change in your mesg. structure ?
change it to....
<root>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
<i><b><cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig></b></i>
</root>
and then use
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
followed by
endSeparator 0
Ref: Suppressing Field In Receiver File Adapter for more details.

Multiple Header line in Receiver File adapter

Hi,
I have an issue in Receiver File adapter with multiple header lines. I am able to get only 1 header lines in the receiver file but not multiple header lines with 'nl' since it is static in file mode
[CommunityTag:Header]
empNo,EmpName,Age
[CommunityTag]
I tried with the below in content conversion one as below with no luck
Root.addHeaderLine=1
Root.headerLine=[CommunityTag:Header] 'nl' empNo,EmpName,Age 'nl' [CommunityTag]
Root.fiedSeparator=,
Root.endSeparator='nl'
I am getting the Header line as same row as static text.
Can you advise this.

Hi Gabriel, I suggest to produce the header lines from additional nodes in the message payload. That means you need to modify the data type of the target message in order to generate an extra structure in the payload. Use constants in message mapping to generate the header column names, e.g.
<Header>
<H1>CommunityTag:Header</H1>
<H2>empNo,EmpName,Age</H2>
<H3>CommunityTag</H3>
</Header>
In content conversion you have to convert the Header row with
Header.endSeparator='nl'
You won't need parameter addHeaderLine anymore then.
Regards, Martin

XI Receiver file adapter : Dyanmic File PATH

Hi,
Appreciate if someone could help me on the issue below:
I have a receiver File adapter with a dynamic target directory as per below:
Target directory: /test/YYYY/MM/DD
the value for YYYY (Year) , MM (Month) and DD (Date) will be the date when the file being transfered from the sender.
Appreciate if someone could help me to achieve this. I know we can use the variable substitution however it doesn't allow us to set a systems field such as sy-datum.
Cheers,
ZAB

Hi,
Populate this value in your payload , and then use Dynamic File Name concept of File Adapter.
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
bhavesh

Attachments for receiver file adapter

Hello gurus,
I think receiver file adapter does not support attachments. But I do have a scenario where I receive additional files as SOAP payloads accompanying the request message and I have to write them to a network directory. How can I achieve this?
Regards,
Gökhan

Hi Gokhan,
Please have a look at the following links and see if it helps
Re: File adapter with attachment to mail
Re: How to use File Adapter to transport files
Best Regards

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
     . // Create XML for each row and Marshal the object into to the String Buffer
     String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
     conf.put(KEY_FILENAME, strFileName);
     arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
     arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
      Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

Problem with File Content Conversion (Receiver FIle Adapter)

Hi Experts,
I have following structure in receiver side:
MT_Test
   F1
   F2
   F3
   F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
   <F1>Hai</F1>
   <F2>Hello</F2>
   <F3>Bye</F3>
   <F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
Adi

Hi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva.

Receiver file adapter with attachments.

Similar Messages

Maybe you are looking for