Same file name from sender to receiver file adapter with out using UDF

Hi All,
I am working on FILE TO FILE. My requirement is same file name from sender to receiver file adapter. Is it possible to do using only Adapter Specific message properties? i mean with out using UDF.
Thanks
Karthik

Hi,
>>>Is it possible to do using only Adapter Specific message properties?
yes
just enable Adapter Specific message properties in sender and receiver channel for file name
and you're done
Regards,
Michal Krawczyk

Similar Messages

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

Alert if no file process :Same file adapter with same communication Channel

Hi XI Guru,
I have encountered 1 requirement from my client where, sender will send different data file with different file name. And there want XI to alert the user if no file to process for the schedule date. Please take note that the communication channel is common to all the sender.
Example:
Communication Channel : CC_FILE_SND
FILE_10.TXT ---> Every month on the 10, user have to send FILE_10.TXT to process
FILE_20.TXT ---> Every month on the 20, user have to send FILE_20.TXT to process
If user fail or forget to send the FILE_10.TXT and FILE_20.TXT on special schedule date to process, XI should alert user.
Many thanks

Hi Lord
<<< there want XI to alert the user if no file to process for the schedule date.
Can you tell me how you are planning to configure this schedule date in your sender file adapter. I mean this date will be fixed or it is going to be change according to the requirement.
Now for the second part in order to alert the user if file is not there, one solution is to use BPM with wait step ( specify the time in this step ), but then again it takes me back to my previous question, the time seems to be different everytime according to the requirement.

How can we do the Testing in Idoc to File Scenario( With out using We19)

Hi All,
As all we know we can generate the Idocs from SAP R/3 to XI using the change Pointers,this we will apply in Production time.
But as of now in the Test system we can'd do it daily.
So we have already created materials in the SAP R/3 system.
I want to send the Idoc to XI by selecting some n number of materials.means i want to generate the Idoc for materials.this is like i have to do repeatedly for testing purpose.
Is there any T-code
How can we do this
Regards

Hi Vamsi,
   For the Message Type ORDERS you can configure Output Type (txn NACE) for IDoc generations and then you can trigger the IDoc using transaction WE15.
Selection Parameter will be as follows
Output application: This will be from Output Type
Object key          : Order Number
Output type         : Output Type name, that you configured
Transmission medium : A
Check the checkbox "Send Again".
Thanks,
Punit

File Adapter with out CC

Hi All,
   I need to FTP a 20 MB csv file as_it_is without any translations. How can i do it without file content conversion.
   1. If it is a XML file There is no problem.
   2. I tried dummy interface(Like no objects in Repository), it is good for upto 6 MB.
Thank you
Ganges Leaves

Hi,
If you just need to pass the file using FTP protocol with no mappings etc. all you need is to create a FILE-FILE scenario without mappings.
The use of FTP follows the specification RFC 959 The use of FTPS follows the specification RFC 4217.
transport protocol on the file communication channel will be File Transfer Protocol (FTP).
fill the comm. channel parameters according to the specifications given by SAP
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">File/FTP configuration</a>
If you have any other questions i'll be happy to assist.
Nimrod

Syncing offline files remotely with out using VPN & other applications

Hi
How can i setup the user (Windows 8.1Pro) which is part of the domain to make them access to the files and folders on the server and sync back remotely on a Windows 2008R2 Server.
These files & folders should be shared between 3 users.
Please let me know
Thanks

Hi,
Do you want to configure offline files on the Windows 8.1Pro or on the Windows 2008R2 Server? The Offline Files feature must be enabled on the client computer for files and programs to be automatically cached.
You could refer to the articles below to configure offline files on clinet computer:
Working with network files when you are offline
http://windows.microsoft.com/en-us/windows/working-with-network-files-offline#1TC=windows-7
Configure Offline Availability for a Shared Folder
http://technet.microsoft.com/en-us/library/cc755136.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

Received email from contact has my name as sender and receiver

My mother and I email each other . She uses gmail , I use hotmail . Past week all mail sent by me to her has her name as sender and receiver in her in box . When I check my sent mail file it has my name as sender . She only has this problem with my email and not other contacts . We are both using IPad

Thank you for replying . We checked her contacts and where she has me as a contact it has my email as contact and also checked it in face time , messages

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name                              parameter value
recordTypes                                  Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator                |\n
FileTrailer.fieldSeparator               |
Header.endSeparator                   |\n
Header.fieldSeparator                  |
TransactionDetail.endSeparator   |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
   Header 0...1
   Transaction 0....Unbounded
      TransactionHeader 1..1
       TransactionDetail     0...unbounded
        TransactionTrailer 1...1
   FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
    <TransactionHeader> 1..1
     </TransactionHeader>
     <TransactionDetail> 0...Unbounded
     </TransactionDetail>
      <TransactionTrailer>1...1
       </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

Receiver File Adapter with File content Conversion

I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.

Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

Using File Adapter with Logical Name

I am creating a file adapter with Logical name. Apart from giving the Logical name is there any other configuration that I am suppose to do on the Web Logic before I start using it?
Thanks in Advance.

After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
Thanks,
N

Sender file adapter Adapter with out Key field

Hi All
i do have have a requirment ,Sender file adapter , for FCC but file is with out Key field
HEADER>
<DATA1>
<DATA2>
<DATA3>
<HEADER> file structure
<ITEM>
<ITEM1>
<ITEM2>
<ITEM3>
<ITEM
and the file si
'10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
, and i need to identify the Header and Item using there lenght only , please anyone as idea abt this help me

Why to post the same question TWICE... in 30 min ? you don't like the answers ?
File content Conversion Issuse for a Sender File Adapter

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 <b>value2</b> value3
I want to ignore <b>value 2</b> but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to Select data using same column name from 3 remote database

Hi,
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.
Ex.
SELECT *
a.name, b.status, SUM(b.qty) qantity, MAX(b.date) date_as_of
FROM
*((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)a,*
*(table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)b)*
WHERE b.dept = 'finance'
AND a.position = 'admin'
AND a.latest = 'Y' AND (b.status <> 'TRM') AND b.qty > 0;
GROUP BY a.name, b.status ;
NOTE: the bold statements is just an example of what I want to do but I always gets an error beacause of ambiguous columns.
Thanks in advnce. :)
Edited by: user12994685 on Jan 4, 2011 9:42 PM

user12994685 wrote:
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.Invalid. This does not make sense and breaks all scope resolution rules. And whether this is in a single database, or uses tables across databases, is irrelevant.
Each object must be uniquely identified. So you cannot do this:
select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a3 objects cannot share the same alias. Example:
SQL> select * from (dual, dual) d;
select * from (dual, dual) d
ERROR at line 1:
ORA-00907: missing right parenthesisYou need to combine the objects - using a join or union or similar. So it will need to be done as follows:
SQL> select * from (select * from dual d1, dual d2) d;
select * from (select * from dual d1, dual d2) d
ERROR at line 1:
ORA-00918: column ambiguously definedHowever, we need to have unique column names in a SQL projection - so the join of the tables need to project a unique set of columns. Thus:
SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
DUM DUM
X X
SQL> I suggest that you look closely at what scope is and how it applies in the SQL language - and ignore whether the objects referenced are local or remote as it has no impact to fundamentals of scope resolution.

ALE, use bd79 (converting data from sender to receiver to blank out fields)

Hi, I am trying to blank four fields out in our FI IDOC for a certain business reason. These fields must be blank (it is the FIDCC1 message type). I am trying to use transaction bd79 (converting data from sender to receiver) maintain rules. Is there a way to blank out these fields using a conversion rule? I can change data fine but I cannot find a way to blank or null a field out. Thanks in advance.

You should have a look at the inbound function module (linked to your inbound process code). sometimes there are checks that if fields are initial that nothing will be changed.

Same file name from sender to receiver file adapter with out using UDF

Similar Messages

Maybe you are looking for