Receiver FTP adapter not intialized

Hello all,
I have set up a receiver File adapter but when I check the adapter monitor it shows me "Adapter not initialized"...The authorizations are prefect since I have set admin id's in the FTP server username and pwd. I would like to check the adapter engine to see if this adpater has been turned on..What is the URL to check the adapter engine in the J2EE stack ?? Also I set up a mail adapter which never shows up in the adapter monitor ..What could be missing??
-Ken

Hi,
go to the path:
<server>\<sapSID>\DVEBMGS10\j2ee\cluster\server0\log\services\com.sap.aii.adapter.file.svc
inside you should be able to find all of you adapters
config_[adaptername] files.
inside you can see their configuration and sometimes
an error message at the end
maybe there will be something over there
Regards,
michal

Similar Messages

Retaining the FileName in the Receiver FTP adapter

Hi experts,
I have a situation here, were i need to retain the FileName in the message header in the receiver FTP adapter.
I have tried using variable subtitution but seems the FileName is not supported in variable substitution.
Please help
Thanks

Hello,
if you need file name to be retained in the receiver adapter from the sender side. then u can do that by dynamic configuration using adapter specific message attributes, check this blog for details-
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
if you dont have a mapping in your interface to use dynamic configuration, then you can do it via adapter module also- have a look here, /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
regards,
francis

Dynamically generate terget directory in receiver FTP adapter

Hi guys,
I'm trying to set up a scenario where the file will be placed into a terget directiry based on values from the incoming message. I can't use variable substitution as my target message does not contain the needed value, so I'm trying to set up a dynamic configuration in an UDF. Unfortunately, this is not working.. Any ideas, what could be wrong? The receiver FTP adapter always just takes values from it's configuration. It doesn't help when I try to change it in mapping.
This is the java map code in the UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, a);
conf.put(key2, "tfilename.txt");
return "";
Thanks a lot for any help,
Olian

Hi,
use below code it will work fine
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
String a=conf.get(key);
String b=conf.get(key1);
var1 = a+b; ;
return var1;
map this udf to root element of your receiver structure.
Regards,
Raj

FTP Adapter not polling

Hi,
We have a clustered environment in Oracle SOA 10.1.3.4 MLR#1. We are setting up 3 different bpel processes polling 3 different locations and using 3 different data source. When we deploy them none of the ftp polling is working. We looked at various blog and added property for ClusterId
<property name="clusterGroupId">myBpelAdapterCluster</property>
I also tried using a different clustergroupid for each of the bpel process.
Does this clusterGroupId should be different for each BPEL process or can we use myBpelAdapterCluster for all 3. Please suggest me what may be the cause for the ftp adapter not polling.
Thanks
Jagan.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

When to use "Use Temporary File" in receiver FTP adapter

Hi Experts,
I have nerver used "Use Temprary File" as the "Write Mode" in receiver ftp adapter.
I want to knwo under what kind of requirment we should use this option?
Thanks in advance.
Best Regards,

Hi Aditya
Usually it's advisable to use "use temporary file" as write mode when you want to avoid your file to be picked up by receiver while PI channel is still writing it.
Obviously larger the file, more chances you have that this issue could occur.
If you select the "use temporary file", XI will write the content to a temporary file with another name of your choice and only once writing has finished it will rename it to the actual name setup in the "file name scheme".
Regards,
Giuseppe

Receiver FTP Adapter File Size Splitting

Hi,
I am receiving an IDoc from R/3 into XI.
I then map this IDoc into an xml file and use a receiver ftp adapter to drop the files onto a ftp server.
Is there anyway, that I can use the adapter to split the message interface into smaller files. For example, if I were to ftp the message interface into 1 file, the file size would be 1MB. I would like to split the 1 message interface into 4 x 250kb files without having to split the message interface?
Thanks,
Miguel

Hi,
If you split into 4 files each one should be a XML file right?
This is possible without BPM.
Go thro the blog:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Wat u need to do is make the target side 0..unbounded. If u have 100 records, Map some 25 records in first occurence, 25 in second and so on. This way u can reduce file size.
Regards,
P.Venkat

Receiver File Adapter Not Executing OS Command

Hello All!
We are currently running PI 7.1 and wish to use a Receiver File Adapter to FTP a file to a mainframe and override the FTP system defaults.
Tried using the 'quote site recfm=fb lrecl=80' OS command but discovered that this would not work as the Adapter Engine is NOT on the mainframe.
Regrouped a bit and made a second attempt which involved writing a Unix script to ftp a file and override rthe system defaults. The idea was to use the File Adapter to FTP the data to the server, invoke the script and get the file to the mainframe with the proper attributes. The script when executed on the server works perfectly.
However, when the IDoc comes thru PI, the File Adapter ftp's the file ok but the script is never executed.
Any ideas why this is so or any suggestions?
Thank you.

Hi Ken,
Script only executes at Network File sharing (NFS) only. It dont work at FTP level.
So you can better write the file on NFS and then within the script to connect to ftp and do your processing.
Regards,
---Satish

Receiver file adapter not functioning

Hi guys,
We have developed some interfaces that are exporting some .txt files in ftp locations and therefore they make use of receiver file adapter. Although the receiver file adapter used to function properly some days ago, for some strange reason, it stopped receiving any files. This happens only in XI development system but not in XI production system. In XI development, in Runtime Workbench --> Communication Channel monitoring, I can see this communication channel's status as correctly configured and started, with a green sign on the right, but it is not responding when some files are sent to it, and therefore there are no output files in target directory.
Any ideas?? It is urgent.
Best Regards
Evaggelos

Udo,
Hi Amit,
I went into Message Monitoring for this interface and I can see all the messages for the last 24 hours that should be written into a file that have status "to be delivered".
When I go into Details -->Audit Log for a single message:
2007-06-13 11:49:33 Success Processing child message of multi-message with message ID ff896d50-198a-11dc-cdfa-00145e694b16
2007-06-13 11:49:33 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-06-13 11:49:33 Success Message successfully put into the queue.
And in Message Data there is the following information:
Status To Be Delivered
Repeatable Yes
Cancelable Yes
Error Category
Error Code
Start 13.06.2007 11:49:33
End
Sender Party
Sender Service TPBS_GR
Receiver Party
Receiver Service TPBS_GR
Interface http://famar.gr:LoyaltyDataMNSToSRS
MI_LoyaltyDataMNSToGR_IB
Quality of Service Exactly Once
Message b2685674-7626-5141-bfa1-13155ad0d25a
Reference
Conversation ID
Serialization Context
Direction INBOUND
Message Type Recv
Profile XI
Connection File_http://sap.com/xi/XI/System
Transport HTTP
End Point http://fmgralxi01:50000/MessagingSystem/receive/AFW/XI
Authorization
Sequential Number 0
Number of Retries 3
Failed 0
Retries 300000
Valid to
Persist Until 13.07.2007 11:49:33
Schedule Time 13.06.2007 11:49:33

Receiver FTP Adapter Problem

Hello. My scenario is: A file is sent from R/3 via RFC, then from XI to an outside system using the FTP adapter. The RFC part is working, but I've encountered some errors with my FTP adapter. The file is not being created in my directory at all and this is the error message I'm getting:
- 2006-10-11 08:28:20 CDT: Error: Message processing failed: Exception: ftp access error: com.sap.aii.adapter.file.ftp.FTPEx: 552 transfer failed
Can anyone help, please?
Thank you.
Nicole

Hi Nicole,
A few things you might check are:
1) The Ip address given is correct.
2) The login details given in File receiver adpater are right
3) The server is running when you make the transfer, that is 'Allow logins' status is checked in case of guild FTP server or similar servers.
4) The destination directory is given as "/root" with "/" slash.
5) All the firewalls are turned off.
6) File processing mode is 'Create'.
Cheers,
Ashish

Receiver FTP Adapter - Directory create

Hello,
the XI FTP Receiver Adapter by default creates the target directory on the FTP Server if it does not exist. The J2SE Engine had an option if you want to create the directory or not.
Is that available in the XI 3.0 J2EE FTP Adapter? I could not find it. Further if that can be set, would the adatper throw an error?
Thanks
Stefan

Hi Stefan,
I'm facing the same issue, while trying to create a dynamic folder in the FTP server.
The FTP adapter failed with the error 'An error occurred while connecting to the FTP server 'ftpserverip:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /root/dynamic/: The system cannot find the path specified. '. For details, contact your FTP server vendor.
Were you able to resolve this issue using any SAP notes?
Thanks in advance.
Thanks,
Joe.

FTP adapter --- Not picking up files

Hi,
I have set up an FTP adapter in archive mode to read files from FTP server and process it while archiving a copy of it. I have set up Poll interval at 40 secs and retry interval also set up. It works great the first time . Processes the file and archives it. But when the same files comes in again in the FTP server, I see the foll. message in the adapter monitor "Error: Stopped due to error: com.sap.aii.adapter.file.ftp.FTPEx: inputdat.txt: No such file or directory: No such file or directory."..The file exists in the FTP server but its not processed..I am not sure what I am missing...
-Teresa

Hi Michal,
I have timestamp set up for archive directory..So every run will create an archive file with timestamp..But the input filename remains the same..Archive functionality would remove the file inthe FTP server..So when the file comes again into the FTP server, the FTP adapter doesn't trigger automatically. Everytime I had to activate the IB for FTP adapter to trigger the process. I know this is not how XI-FTP adapter should work..Our scenario is we would receive weekly files into the FTP adpater with the same name. We need to archive each weekly file and also send it for further processing..I can't be activating the process manually ....I know something is going wrong but can't figure it out...:(..Any help is appreciated...:)
-Teresa

FTP adapter not activating on its own

Hi all,
I have set up a sender FTP adapter and whenever a file falls in there the process is not trigered automatically...Everytime we need activate our directory settings to send the file through FTP adapter...I am not able to figure out why the FTP ADAPTER cannot get activated once it receives a file..
Any ideas...
-Teresa

Hi teresa
What I can figure out is , I think you might not given the polling time , after certain time adapter needs to poll the file from source and excute it. add some value of polling say 60( 60 sec) . It will poll the file after every 60 sec and excute it. also make sure that mode should not be test otherwise it will excute it every time after polling time and u will have huge no of messages in XI.
Hope this will help .
regards
Vinod ahir

FTP adapter not picking files

Hi
I trying to get files from a remote FTP server
but the FTP adapter configured is not able to pick up files from the remote folder
using
soa 11.1.1.3
filezilla as FTP server
+<Sep 5, 2011 5:32:56 PM GMT+05:30> <Error> <oracle.soa.b2b.transport> <BEA-00000+
+0> <[IPT_FileRecMonitorError] Error in ftp or file receiver monitor.>+
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using mcf
for credentials
FINE: Ftp Adapter Managed Connection Created
FINE: Ftp Adapter Adding Event Listener
FINE: Ftp Adapter Connection Created
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Wed Aug 31 1+
+9:40:00 GMT+05:30 2011] for [Aug 31 19:40], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Fri Sep 02 1+
+8:23:00 GMT+05:30 2011] for [Sep 02 18:23], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Fri Sep 02 1+
+8:33:00 GMT+05:30 2011] for [Sep 02 18:33], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Mon Sep 05 1+
+3:13:00 GMT+05:30 2011] for [Sep 05 13:13], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Mon Sep 05 1+
+3:45:00 GMT+05:30 2011] for [Sep 05 13:45], time offset=[0]+
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@8
+68852+
can someone help me on this
-Regards
adiKsystime

Hey Naresh
thanks for your earlier reply
but I have no luck yet
soa_server logs show
FINE: Ftp Adapter Clearing Event Listeners
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Managed Connection Created
FINE: Ftp Adapter Adding Event Listener
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
+47dc09+
FINE: Ftp Adapter The candidate set size in matchManagedConnection [1]
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
d469b0
FINE: Ftp Adapter The candidate set size in matchManagedConnection [1]
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
+040f85+
FINE: Ftp Adapter FTPManagedConnection::destroy called, closing physical socket
and No luck yet in picking up the remote files
regards
adiKsystime

Setting dynamic file name in Receiver file adapter - not from payload

Guys I just remember reading a weblog but can't find it now that I need it, on how to set the file name in message mapping dynamically but not using any payload field.
Please let me know if you remember this.
Thanks a lot,
Viktor Varga

also u can check in
<a href="/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>

Receiver FTP adapter not intialized

Similar Messages

Maybe you are looking for