Receiver FTP channel showing error
I am facing some bizarre error even though my target directory for target ftp location is correct
I checked all the parameters but didnt find out the issue.
I have attached the screenshot for Receiver file channel.
Please help and do reply.
Below is the error:-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: The parameter "argument" has the value "remote://\pos\Place/*20150422-183629-696.xml", so it contains the character "remote://\pos\Place/*20150422-183629-696.xml" which is not allowed: com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "remote://\pos\Place/*20150422-183629-696.xml", so it contains the character "remote://\pos\Place/*20150422-183629-696.xml" which is not allowed
Hi Mahesh,
Have you trying to create a file with a wildcard like the asterisk '*'?. Try to avoid the asterisk to set the file name.
Regards.
Similar Messages
-
File Receiver Comm Channel in error
Hi All,
I am getting below error in my receiver communication channel -
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Unable to clone File Adapter receiver channel for parallel processing
This is just FiletoFile scenario. I am trying to use VARIABLE SUBSTITUTION here to give dynamic name to the file at receiver. I haven't use FCC here.
If I dont use VARIABLE SUBSTITUTION then scenario is working fine.
Thanks & Regards,
Rashmi JoshiHi Abhradeep,
I am getting new error now -
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: Vname
I have changed the reference value as -
Emp_ID
payload:MT_File,1,Record,1,Emp_ID,1
Thanks & regards,
Rashmi Joshi -
Sender file comm channel shows error status when no file is in source
Hello,
I have this sender file communication channel which is picking up files using ftp. <b>Its working fine</b> but if there is no file in the source directory during polling, it shows an error status in communication channel monitor. The error message is that directory/file does not exist and also * in file name is invalid character.
I have the same settings on our dev, QA and prod system but this strange thing is happening only on the dev and prod. Its not happening on QA whereas QA access the same directory as dev.
Any idea ???Hi,
The error is strange one.
I suggest you to check Visual Admin to findout the exact trace/log file.
May be because of some connection problems etc..
Just go thru this SAP Note about File Adapter- 821267
Regards,
Moorthy -
Receiver SFTP Channel giving error
Hi PI Experts,
My scenario is ECC->PI->SFTP server.
I am using Password based Authentication to send files to SFTP server using SFTP adapter.
Now SFTP adapter giving the error like "Message could not be forwarded to the JCA adapter. Reason: com.jcraft.jsch.JSchException: Auth failed".
I am able to login to SFTP server with provided User ID and Password through WinSCP tool. But when I tried to place files through SFTP adapter, it is throwing the above error.
I have configured the Server IP (not host name), Port and Server fingerprint.
I am using the PI7.31 SP08.
Could anyone please help me on this issue?
Thanks,
Govindu.Hi Govindu,
The problem could be some things, check these notes
1945020 - SFTP Recevier channel throws UnsupportedOperationException
1514898 - XPI Inspector for troubleshooting XI
Regards. -
FTP error: Receiver Communication Channel
Hello Experts,
I am getting the following FTP error in my Receiver Communication Channel.
Error occurred while connecting to FTP server: Peer certificate rejected by ChainVerifier
Please suggest.
Thanks,
AnupHi Anup,
Problem is with FTPS and not FTP.The SSL handshake needs to confirm that the FTPS client is using the FTPS server's DNS name to access the FTP service since only the DNS name of the FTPS server is stored in the certificate signed by the trusted CA (e.g. VeriSign). it's the way the Certification Authorities works.
If you are using any IP address then try with your host name.
Regards,
Madan -
Receiver SOAP channel error-- Cant parse the document; HTTP 200 OK
Hi All,
I am facing below error in SOAP receiver communication channel
SOAP: Error occurred: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: Cant parse the document; HTTP 200 OK
If I use "Do Not se SOAP Envelop" in receiver communication channel then it shows successfully delivered in message monitoring but never reached to target application. And if I uncheck "Do Not se SOAP Envelop" then the error is as I mentioned above.
Both ways it not working foe me.
Please advice.
Thanks
ShiviHi
I had a similar issue recent times and I have enablede the xpi inspector to check the logs of the request and the response sent and received...
Based on that you can check whether your payload is able to sent to receiver in proper format or any other issues..
Also try to check the payload format using the SOAPUI whether the ws is working fine for that or not.
HTH
Rajesh -
IDoc to File, SM58 shows error, ST22 short dump - Runtime error
Hi friends,
I am doing a simple IDoc to file scenario using the EVMSTA01 IDoc. My XI is running on client 100 and I am trying to send the IDoc from the client 200 on the same machine. I have completed the design and configuration steps required and also performed the required steps in Sender client (Sm59, we21 and BD54) and receiver client (Sm59, IDX1 and IDX2).
When I tried sending the IDoc from WE19, status meesage says that, the IDoc has been successfully sent to the receiver but SM58 shows error "IDOC_ERROR_WORKFLOW_START_R". When I looked in to ST22, there was a short dump with the below message -
Runtime Errors MESSAGE_TYPE_X
Date and Time 18.10.2008 23:24:29
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_200
Technical information about the message:
Message classe...... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_200"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Trigger Location of Runtime Error
Program CL_SWF_RUN_WIM_LOCAL==========CP
Include CL_SWF_RUN_WIM_LOCAL==========CM07Z
Row 10
Module type (METHOD)
Module Name IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
rce Code Extract
e SourceCde
1 METHOD if_swf_run_wim_utl_internal~get_system_user .
2 DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4 TRY.
5 IF me->m_int_state-system_user IS INITIAL.
6 me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7 ENDIF.
8 re_user = me->m_int_state-system_user.
9 CATCH cx_swf_run_wim INTO l_excp.
>> MESSAGE ID l_excp->t100_msg-msgid
11 TYPE 'X'
12 NUMBER l_excp->t100_msg-msgno
13 WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14 l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15 ENDTRY.
16
17 ENDMETHOD. "
Any help would be appreciated..!!
PS: Points would be assigned to all the helpful replys without failHi,
See check for RFC destination and it is working as per your configuration or not , i mean , it is trying to locate remote server.. , so try to check in sm59, remote login and the respective result is going to your required client or not ??
Also see the further errors while doing Idoc related scenarios..
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI . Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla -
Empty file created in Receiver FTP content conversion
Hi,
The receiver FTP channel is generating an empty file.
The entry for the message in sxi_monitor is successful, also the target payload is having values.
Still the file content conversion is generating an empty file.
The three parameters given in content conversion are:
1. fieldFixedLengths
2. fieldNames
3. end Separator
Kindly help.
Thanks,
JohnHi John
I hope your structure is like this :
Root Node
...Child Node
.......field1
.......field2 & so on...
If so, in recordset structure add the name of the Root Node too. I faced the same issue sometime back.
Use the same parameters for Root Node that you are using for Child Node.
Apart from this check the payload in Message Display tab(communication channel monitoring) in RWB.
Regards
Soumen.... -
View Channel disconnected error
Hi Everyone,
I received a Channel disconnected error, how can I view where the error is occuring? Is that possible?
WesleyI finally figured out what I was doing wrong. I was following davidflex's insturction at http://forums.adobe.com/thread/875709 and did not realize that I ahve to set host = "localhost:8889" in my php that connects to my remote mysql server. It's tricky because sicen it's remote server, you should set host = your domain, but that's not right. As davidflex said you need to set host = "local:8889" since your gateway.php is also running on the remote server.
I stumbled for several weeks and hope someone else won't get stuck like I did for serveral weeks. -
File2file-receiver-comm channel-incorrect ftp server
Hello,
The scenario is file (xml) to file (xml) to jumpstart the learning process.
config details:-
a) sender
ftp file "/xi_input.dat" from server 10.20.30.98
processing mode: "delete"
b) receiver
ftp file "/xi_output.dat" to server 10:20:30:98
file construction mode: "create"
Expected result:-
file at sender should be read by XI and deleted. Output file should be created by XI.
Acheived result:-
SXMB_MONI status is "processed successfully-(white black flag). XI read sender file "xi_input.dat" and it was deleted as requested in the config. But there was no output file "/xi_output.dat". Then chaged the FTP server at receiver to 10.20.30.98. This resulted in creation of /xi_output.dat
Question:-
Though I got the desired result, I was unable to find the error from SXMB_MONI by myself.
I could manage to debug and find the sequence of actions, here it goes:-
tointerfacename->service->channel->file adapter->ftp mode
but there is no trace about why /xi_output.dat is not created via ftp (due to typo error in server name).
Please look at the log and advise why SXMB_MONI didn't report this error? or point me how to debug better.
<SAP:ToInterfaceName>mi_name_in</SAP:ToInterfaceName>
<SAP:ToInterfaceNamespace>urn://file2file_2</SAP:ToInterfaceNamespace>
- <SAP:OutboundBindingAttributes>
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:OutboundBindingAttributes>
- <SAP:HeaderMapping>
<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:HeaderMapping>
- <SAP:ChannelEntry version="30">
<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">sevice</SAP:ServiceName>
<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">cc_in</SAP:ChannelName>
<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:AdapterName>
<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>
<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>
<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">AE</SAP:AdapterEngineType>
<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:MessageProtocol>
<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">3.0.0527</SAP:MessageProtocolVersion>
<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">FTP</SAP:TransportProtocol>
<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />Thanks. The error is exactly what I was looking for.
In RTW->CC->log
Error Attempt to process file failed with Error occurred while connecting to the FTP server "10:20:40:92:21": java.net.UnknownHostException: 10:20:40:92
Now RTW still has red for receiver communication channel with the note
"In the Last 4 Hours Server 0 50_40103 Communication channel is correctly configured and started "
I performed stop and start to the communication channel it results in red status. However it is creating the file without problems.
Any way to make communicaton channel green? -
Error in receiver comm channel
Hi All,
I am working on scenario file to file with out IR.just picking up the file from sap app server and placing in target ftp server.
My sender comm channel is picking the file fine but when in receiver comm channel i am getiing error as
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Unknown payload format 0 in message"
"Attempt to process file failed with Unknown payload format 0 in message"
i have checked in content of the file it contains no special character. are any security is being maintained.
please advise on this.
Thanks,
BhaskarHi Jude,
I have checked in sender comm channel in message display tool under message content i am getting error as below.
messagecontent
message part [soap document]
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: null], with root cause [java.lang.NullPointerException: null].
Exception id: [00145E474044003F000018AD00003E0D000471A1CBF6A02A]
what would be the error and how can i find it.
Is this basis related issue?
Thanks,
Bhaskar -
SMTP Receiver Communication Channel error: connection refused
Dear all.
When migrating processes from XI 3.0 to PI 7.1 we run into the problem that we can't get the SMTP Receiver Communication Channel working on PI. We get the following error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect
(The NetWeaver Administrator log shows the following:
unable to call the mailer: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect)
- We copied all configuration settings 1-on-1 from XI to PI, and double-checked we made no mistakes.
- We confirmed the PI system can in fact reach the mailserver by successfully sending Email from the ABAP stack of the PI system (transactions SOST and SCOT)
- When deliberately mistyping the mailserver URL, we get the error: java.net.UnknownHostException. This makes me believe that the 'connection refused' error we get (after re-entering the correct mailserver URL) is indeed coming from the mailserver. But why would it refuse the connection if it allows the connection from the ABAP stack of the same server? And why didn't we run into any such problems on XI?
Any help is much appreciated!
Kind regards,
Eddy Driessen.Hi All,
We have upgraded our XI3.0 system to PI7.1 and currently performing testing for different adapters. We are also facing similar problem for a scenario File to Mail
19.11.2010 11:31:56 Error Mail: error occured: java.net.UnknownHostException: [url]
19.11.2010 11:31:56 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
19.11.2010 11:31:56 Error Adapter Framework caught exception: Failed to call the endpoint
19.11.2010 11:31:56 Error Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null " null"]; nested exception caused by: java.net.UnknownHostException: [url].
19.11.2010 11:31:56 Information The message status was set to WAIT.
*[url] = Mail server
Can anyone suggest the steps to solve this error
Thanks
Varun -
JDBC : error in receiver communication channel?
Hi Experts ,
I am doing a JDBC to JDBC scenario. The following error comes in my receiver communication channel monitoring.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'VIN_STG_STORER_RMS' (structure 'Statement'): java.sql.SQLException: FATAL ERROR document format in structure 'Statement': expected 'access' tag(s) not found
My receiver data type has got the 'access' tag. What other reason can cause this error?
Receiver table name : VIN_STG_STORER_RMS
Regards,
ShamlyHi Ranjit,
My moni shows processed successfully. but the error is in communication channel.
I have pasted below the target xml structure. Any suggestions?
Thank you.
Shamly.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://mg.adityabirla.com/mg/wms/store_supps" targetNamespace="http://mg.adityabirla.com/mg/wms/store_supps">
<xsd:element name="MT_WMS_Store_Supps" type="DT_WMS_Store_Supps" />
<xsd:complexType name="DT_WMS_Store_Supps">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
1f3cf480f98411dcb83a0003ba0adbbd
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Statement">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee0ef5c11dcb812001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="VIN_STG_STORER_RMS">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee1ef5c11dca724001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="access" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f0ef5c11dca305001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="STORERKEY" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f1ef5c11dcb3c3001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TYPE" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f2ef5c11dcc33e001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="WHSEID" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f3ef5c11dcabb7001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
...and so on for many other fields.
Edited by: Shamly MM on Mar 24, 2008 10:27 AM -
hi,
I am facing an issue with the JMS Receiver Communication channel.Data is not getting inserted in the JMS Queue.CC Monitoring is showing the below ERROR:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: JMS_r_CustomerLedgeron node: 7065651 having object id: 340fa47e4dc33a04a4f8a5a108708f07 encountered error: Error sending message in sending to destination custLedgerReplication, the message message: TextMessage[null, <?xml version="1.0" encoding="...]: weblogic.jms.common.JMSException: Error sending message.
can someone helpme out.
thanks,
robinHello Robin,
did you resolve this issue? I have now the same problem.
Do you have connections with two (or more) BEA servers using the same Adapter Framework?
Note 1090516 describes a problem with credentials confusion when connecting to more servers.
It could be the cause.
With regards
Tomas -
Receiver JDBC Channel Error : Incorrect syntax near 'OR'
hi,
we are facing the below error at the receiver communication channel:
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 'OR'.
When we again reprocess the message,it shows the exact error at the channel.
Any ideas why the first error shows up?Hi, Anu
The most probable it's that your target XML it's not correct because it haven't a correct format.
Please, check your target XML and see
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/465581929734d9e10000000a42189d/frameset.htm
Regards,
Carme
Maybe you are looking for
-
How can i delete all of my SENT emails at once?
I would like to get rid of my SENT emails but I can only do it one at a time. Any suggestions?
-
Adobe Bridge 5.0.2.4 (CS6) - How to make Web Gallery.
Adobe Bridge 5.0.2.4 (CS6) - How to make web gallery.
-
Can someone help me with my phone? i have already the gprs/wap,mms, and internet settings on my phone but i still cannot connect to the net? i cant browse using my phone cause my phone said that pocket data connection not available and link not avail
-
HP how can you be content screwing your customers
I have had issues over the years with the wireless connectivity of my Pavillion m9350f computer. Even when HP was a reputable company that stood behind its products it was poorly handled. It went in for repair once came back but the problem resurface
-
Hi all could anyone tell me what is error code 8058. Regards.